Resources

An optical sensor is submerged in a chemical processing tank where the solution concentration is monitored via optical waveguiding. The core glass has a refractive index n1=1.620n_1 = 1.620, while the fluid serves as the cladding. The chemical mixture has an optical refractive index specified by the lab technician as n2=1.385×103 mUn_2 = 1.385 \times 10^3\text{ mU} (milli-refractive index units, where 1 U=1.0001\text{ U} = 1.000). Express n2n_2 in standard dimensionless optical units and determine the acceptance numerical aperture (NA\text{NA}) of the immersed sensor for light injected from an external fiber bundle (next=1.000n_{\text{ext}} = 1.000).

Answer and steps

Final answer

n2=1.385n_2 = 1.385; NA=0.8403\text{NA} = 0.8403.

Steps

01

Convert the Cladding Refractive Index to Standard Units

The refractive index of the surrounding fluid (acting as the optical cladding) is given in milli-refractive index units (mU\text{mU}): 1 U=1.000  ⟹  1 mU=10−3 U=10−31\text{ U} = 1.000 \implies 1\text{ mU} = 10^{-3}\text{ U} = 10^{-3}

Converting n2n_2 into standard dimensionless units: n2=1.385×103 mU=1.385×103×10−3=1.385n_2 = 1.385 \times 10^3\text{ mU} = 1.385 \times 10^3 \times 10^{-3} = 1.385


02

Determine the Acceptance Numerical Aperture (NA\text{NA})

For an optical waveguide or fiber, light is guided along the core through Total Internal Reflection (TIR) at the core-cladding boundary. TIR occurs only when the core index is greater than the cladding index (n1>n2n_1 > n_2), which holds true here (1.620>1.3851.620 > 1.385).

The numerical aperture measures the range of angles over which the optical fiber can accept light that will undergo total internal reflection. It is defined by: NA=nextsin⁡θmax=n12−n22\text{NA} = n_{\text{ext}} \sin\theta_{\text{max}} = \sqrt{n_1^2 - n_2^2}

where:

  • n1=1.620n_1 = 1.620 is the refractive index of the core glass,
  • n2=1.385n_2 = 1.385 is the refractive index of the surrounding fluid (cladding),
  • next=1.000n_{\text{ext}} = 1.000 is the refractive index of the launching medium.

03

Compute the Value of NA\text{NA}

Substitute the known indices into the formula: n12=(1.620)2=2.6244n_1^2 = (1.620)^2 = 2.6244 n22=(1.385)2=1.918225n_2^2 = (1.385)^2 = 1.918225

Subtract the squares: n12−n22=2.6244−1.918225=0.706175n_1^2 - n_2^2 = 2.6244 - 1.918225 = 0.706175

Taking the square root: NA=0.706175≈0.8403\text{NA} = \sqrt{0.706175} \approx 0.8403

Pitfall to Avoid: Do not confuse the external launching medium index (next=1.000n_{\text{ext}} = 1.000) with the cladding index (n2=1.385n_2 = 1.385). The ability of the guide to trap light internally depends strictly on the difference between the core and cladding indices, n12−n22\sqrt{n_1^2 - n_2^2}. The external medium only determines the physical acceptance angle θmax=arcsin⁡(NAnext)\theta_{\text{max}} = \arcsin\left(\frac{\text{NA}}{n_{\text{ext}}}\right).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets milli-refractive index units by multiplying by 10³ instead of 10⁻³, yielding an unphysical cladding index of 1.385 × 10⁶.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    n2=1.385×103×103=1.385×106n_2 = 1.385 \times 10^3 \times 10^3 = 1.385 \times 10^6

    Correct

    n2=1.385×103×10−3=1.385n_2 = 1.385 \times 10^3 \times 10^{-3} = 1.385

    The prefix milli- represents 10−310^{-3}, not 10310^3. Multiplying by 10310^3 instead of 10−310^{-3} incorrectly scaled the refractive index up by a factor of one million.

  2. Step 2

    NA=n12−n22=(1.620)2−(1.385×106)2\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{(1.620)^2 - (1.385 \times 10^6)^2}, which is undefined because the value under the square root is negative.

    Correct

    NA=1.6202−1.3852=0.706175≈0.8403\text{NA} = \sqrt{1.620^2 - 1.385^2} = \sqrt{0.706175} \approx 0.8403

    You correctly recalled the formula NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}, but substituting the incorrect n2n_2 caused the radicand to become negative.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the numerical aperture formula NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}.

You correctly recognized that a negative value under a real square root would make the result undefined.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You treated the prefix milli- (mU\text{mU}) as a multiplier of 10310^3 rather than 10−310^{-3}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the conversion factor between milli-units and base units. In physical optics, transparent liquids and solids have refractive indices near 1.0–2.51.0\text{--}2.5; obtaining a value on the order of 10610^6 indicates an inverted unit conversion factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Prefix Definition
  • The metric prefix milli- (m\text{m}) always denotes 10−310^{-3}, so 1 mU=10−3 U1\text{ mU} = 10^{-3}\text{ U} and 1 U=103 mU1\text{ U} = 10^3\text{ mU}.

  • Substitute 10−310^{-3} in place of the prefix 'm': 1.385×103 mU=1.385×103×10−3=1.3851.385 \times 10^3\text{ mU} = 1.385 \times 10^3 \times 10^{-3} = 1.385.

Physical Plausibility Check
  • Refractive indices of ordinary optical media typically range between 11 and 33.

  • If a calculated refractive index is significantly greater than 33, immediately check your unit conversion for an inverted power of ten.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct conversion factor 1 mU=10−31\text{ mU} = 10^{-3}: n2=1.385×103×10−3=1.385n_2 = 1.385 \times 10^3 \times 10^{-3} = 1.385.

  2. Verify that total internal reflection is possible: n1=1.620>n2=1.385n_1 = 1.620 > n_2 = 1.385.

  3. Substitute the values into the numerical aperture formula: NA=n12−n22=1.6202−1.3852\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.620^2 - 1.385^2}.

  4. Calculate the squares and difference: 1.6202−1.3852=2.6244−1.918225=0.7061751.620^2 - 1.385^2 = 2.6244 - 1.918225 = 0.706175.

  5. Take the square root: NA=0.706175≈0.8403\text{NA} = \sqrt{0.706175} \approx 0.8403.

Final answer

n2=1.385n_2 = 1.385; NA≈0.8403\text{NA} \approx 0.8403

NEXT STEPS
Final Takeaways from Your Teacher
  • Review SI prefix multipliers (such as milli- for 10−310^{-3}, micro- for 10−610^{-6}, and kilo- for 10310^3) to ensure you apply the correct sign to the exponent.

  • Perform an order-of-magnitude sanity check on intermediate optical quantities before substituting them into waveguiding formulas.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the numerical aperture using linear subtraction of the refractive indices rather than the square root of the difference of their squares.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n2=1.385×103×10−3=1.385n_2 = 1.385 \times 10^3 \times 10^{-3} = 1.385

  2. Step 2

    NA=n1−n2  ⟹  NA=1.620−1.385=0.235\text{NA} = n_1 - n_2 \implies \text{NA} = 1.620 - 1.385 = 0.235

    Correct

    NA=n12−n22=1.6202−1.3852≈0.8403\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.620^2 - 1.385^2} \approx 0.8403

    You used linear subtraction n1−n2n_1 - n_2 to find the numerical aperture. Because numerical aperture originates from Snell's law at the critical angle (sin⁡θc=n2/n1\sin\theta_c = n_2/n_1 and cos⁡θc=1−sin⁡2θc\cos\theta_c = \sqrt{1 - \sin^2\theta_c}), the correct expression is NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly interpreted the unit prefix milli-refractive index units (mU\text{mU}) and converted n2n_2 to standard units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion (linear subtraction vs. root difference of squares)

You subtracted the refractive indices directly instead of computing the square root of the difference of their squares.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute index difference Δn=n1−n2\Delta n = n_1 - n_2 (or fractional index difference Δ≈(n1−n2)/n1\Delta \approx (n_1 - n_2)/n_1) with the numerical aperture NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}, which is derived using the Pythagorean trigonometric identity cos⁡θc=1−sin⁡2θc\cos\theta_c = \sqrt{1 - \sin^2\theta_c}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Numerical Aperture Definition
  • For a step-index fiber or waveguide, NA=nextsin⁡θmax=n12−n22\text{NA} = n_{\text{ext}}\sin\theta_{\text{max}} = \sqrt{n_1^2 - n_2^2}.

  • Always square both indices, subtract the cladding square from the core square, and take the square root.

Index Difference vs. NA
  • The linear difference n1−n2n_1 - n_2 indicates index contrast, but optical acceptance angle depends on sin⁡θ=1−cos⁡2θ\sin\theta = \sqrt{1 - \cos^2\theta}.

  • Check that your NA\text{NA} formula uses squares under a radical rather than simple subtraction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the acceptance numerical aperture formula: NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}.

  2. Substitute n1=1.620n_1 = 1.620 and n2=1.385n_2 = 1.385: NA=(1.620)2−(1.385)2\text{NA} = \sqrt{(1.620)^2 - (1.385)^2}.

  3. Compute the squares and difference: n12−n22=2.6244−1.918225=0.706175n_1^2 - n_2^2 = 2.6244 - 1.918225 = 0.706175.

  4. Take the square root: NA=0.706175≈0.8403\text{NA} = \sqrt{0.706175} \approx 0.8403.

Final answer

n2=1.385n_2 = 1.385; NA≈0.8403\text{NA} \approx 0.8403

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the trigonometric derivation of numerical aperture from Snell's law at the entrance face and total internal reflection at the core-cladding boundary.

  • Practice computing NA\text{NA} across different core and cladding pairs to solidify the n12−n22\sqrt{n_1^2 - n_2^2} formula.

OverviewACEpath Teacher's Diagnosis

03 The student adds the squares of the core and cladding refractive indices instead of subtracting them inside the square root.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    n2=1.385×103×10−3=1.385n_2 = 1.385 \times 10^3 \times 10^{-3} = 1.385

  2. Step 2

    NA=n12+n22\text{NA} = \sqrt{n_1^2 + n_2^2}

    Correct

    NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}

    You used a plus sign between n12n_1^2 and n22n_2^2. The numerical aperture is derived using the Pythagorean trigonometric identity cos⁡θc=1−sin⁡2θc\cos\theta_c = \sqrt{1 - \sin^2\theta_c}, where the critical angle satisfies sin⁡θc=n2/n1\sin\theta_c = n_2 / n_1, which produces the difference n12−n22\sqrt{n_1^2 - n_2^2}.

  3. Step 3

    NA=(1.620)2+(1.385)2=2.6244+1.9182=4.5426≈2.131\text{NA} = \sqrt{(1.620)^2 + (1.385)^2} = \sqrt{2.6244 + 1.9182} = \sqrt{4.5426} \approx 2.131

    Correct

    NA=2.6244−1.918225=0.706175≈0.8403\text{NA} = \sqrt{2.6244 - 1.918225} = \sqrt{0.706175} \approx 0.8403

    Your arithmetic follows your chosen formula correctly, but the result is incorrect because of the sign error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the cladding index from milli-refractive index units to standard dimensionless form.

You performed accurate squaring and square-root calculations on your chosen expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula sign error

You added the squared refractive indices instead of subtracting them inside the square root.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the vector magnitude / hypotenuse formula with the numerical aperture expression. In waveguide geometry, the critical angle condition at the core-cladding boundary gives cos⁡θc=1−(n2/n1)2\cos\theta_c = \sqrt{1 - (n_2/n_1)^2}, so Snell's law at the entrance face requires nextsin⁡θmax=n1cos⁡θc=n12−n22n_{\text{ext}}\sin\theta_{\text{max}} = n_1\cos\theta_c = \sqrt{n_1^2 - n_2^2}. Furthermore, when light enters from air or vacuum (next=1n_{\text{ext}} = 1), NA=sin⁡θmax≤1\text{NA} = \sin\theta_{\text{max}} \le 1, meaning an answer of 2.1312.131 is physically impossible.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivation check
  • At the core-cladding interface, the critical angle is sin⁡θc=n2n1\sin\theta_c = \frac{n_2}{n_1}. The complementary angle inside the core is sin⁡(90∘−θc)=cos⁡θc=1−(n2n1)2\sin(90^\circ - \theta_c) = \cos\theta_c = \sqrt{1 - \left(\frac{n_2}{n_1}\right)^2}.

  • Always verify whether the optical formula involves a difference derived from cos⁡θ=1−sin⁡2θ\cos\theta = \sqrt{1 - \sin^2\theta} before computing.

Physical plausibility check
  • Since NA=nextsin⁡θmax\text{NA} = n_{\text{ext}}\sin\theta_{\text{max}}, if next=1.000n_{\text{ext}} = 1.000, NA\text{NA} must be less than or equal to 1.0001.000.

  • If your calculated NA>1\text{NA} > 1 in air, immediately check for an inadvertent plus sign under the radical.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct numerical aperture formula: NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}.

  2. Substitute the given refractive indices: NA=(1.620)2−(1.385)2=2.6244−1.918225\text{NA} = \sqrt{(1.620)^2 - (1.385)^2} = \sqrt{2.6244 - 1.918225}.

  3. Compute the difference and take the square root: NA=0.706175≈0.8403\text{NA} = \sqrt{0.706175} \approx 0.8403.

Final answer

n2=1.385n_2 = 1.385; NA≈0.8403\text{NA} \approx 0.8403

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that numerical aperture depends on index contrast as ncore2−nclad2\sqrt{n_{\text{core}}^2 - n_{\text{clad}}^2}.

  • Practice deriving the formula from Snell's law at the fiber face and the critical angle condition at the cladding interface.

  • Perform sanity checks on final answers by confirming that NA≤1\text{NA} \le 1 when entering from air or vacuum.

Lock it in

Similar question

01

An optical fiber core has a refractive index of n1=1.500n_1 = 1.500. The surrounding liquid cladding has a refractive index given as n2=1.200×103 mUn_2 = 1.200 \times 10^3\text{ mU}. Express n2n_2 in standard units and calculate the numerical aperture (NA\text{NA}) of the fiber.

Answer

n2=1.200×103×10−3=1.200n_2 = 1.200 \times 10^3 \times 10^{-3} = 1.200. Then NA=n12−n22=1.5002−1.2002=2.25−1.44=0.81=0.900\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.500^2 - 1.200^2} = \sqrt{2.25 - 1.44} = \sqrt{0.81} = 0.900.

02

A polymer waveguide with core index n1=1.580n_1 = 1.580 is placed in an aqueous solution. A refractometer reports the solution's index as 1.330×106 μU1.330 \times 10^6\ \mu\text{U} (micro-refractive index units, where 1 μU=10−61\ \mu\text{U} = 10^{-6}). Convert this to standard units and determine the acceptance numerical aperture of the waveguide.

Answer

n2=1.330×106×10−6=1.330n_2 = 1.330 \times 10^6 \times 10^{-6} = 1.330. Then NA=n12−n22=1.5802−1.3302=2.4964−1.7689=0.7275≈0.8529\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.580^2 - 1.330^2} = \sqrt{2.4964 - 1.7689} = \sqrt{0.7275} \approx 0.8529.

03

A step-index optical sensor with n1=1.600n_1 = 1.600 is immersed in a liquid whose refractive index is 1.420×103 mU1.420 \times 10^3\text{ mU}. Light enters the core from air (next=1.000n_{\text{ext}} = 1.000). Find the maximum acceptance half-angle θmax\theta_{\text{max}} in air for light to be guided along the sensor.

Answer

n2=1.420×103×10−3=1.420n_2 = 1.420 \times 10^3 \times 10^{-3} = 1.420. The numerical aperture is NA=1.6002−1.4202=2.56−2.0164=0.5436≈0.7373\text{NA} = \sqrt{1.600^2 - 1.420^2} = \sqrt{2.56 - 2.0164} = \sqrt{0.5436} \approx 0.7373. Since NA=nextsin⁡θmax\text{NA} = n_{\text{ext}} \sin\theta_{\text{max}} with next=1.000n_{\text{ext}} = 1.000, θmax=arcsin⁡(0.7373)≈47.5∘\theta_{\text{max}} = \arcsin(0.7373) \approx 47.5^\circ.

Loading workspace…