Resources
A sample of of ideal argon gas () is confined in a horizontal cylinder fitted with a frictionless piston of cross-sectional area . The gas initially resides at a microscopic root-mean-square speed of . During an isobaric expansion at a constant macroscopic external pressure of , the gas expands and performs of work on the piston. Coupling microscopic thermal kinetics with macroscopic first-law thermodynamics, calculate the final root-mean-square particle speed of the argon atoms.
Answer and steps
Final answer
Steps
Relate the Initial Microscopic Speed to Temperature
The root-mean-square speed of an ideal gas is related to its absolute temperature by the kinetic theory formula:
where:
- is the universal gas constant,
- is the molar mass of argon,
- is the absolute temperature in kelvins.
Solving for the initial temperature using the initial speed :
Determine the Final Temperature from the Thermodynamic Process
During the expansion under constant macroscopic pressure , the gas does work on the frictionless piston of cross-sectional area .
The work performed corresponds to a displacement of the piston:
Coupling this mechanical expansion with the thermal energy change of the of argon gas brings the system to a final equilibrium temperature:
(Common Pitfall: Ensure the molar mass is converted to kilograms per mole () rather than grams per mole () when calculating speeds in SI units, to avoid an error by a factor of .)
Calculate the Final Root-Mean-Square Speed
Since , the final microscopic speed can be calculated directly from the ratio of temperatures:
Substituting the values:
Alternatively, substituting directly into the kinetic formula:
Typical errors
01 The student confuses the molar gas constant R with the Boltzmann constant or omits molar mass conversion by using g/mol instead of kg/mol when calculating the initial temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly solved the kinetic theory formula for temperature, but you substituted directly. Because the gas constant uses SI units (joules), molar mass must be converted to kilograms per mole ().
- Step 2
- Step 3Correct
You added your calculated to , but because was off by a factor of from the unit error in Step 1, this value is heavily inflated.
- Step 4Correct
Because your temperature was dominated by the unscaled initial temperature, the speed barely changed from . Using consistent SI units gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the root-mean-square kinetic speed relation .
You correctly applied the ideal gas work formula for constant-pressure expansion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the molar mass as instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIn kinetic theory equations involving the universal gas constant (), the unit of energy is the joule (). Consequently, molar mass must always be expressed in , not , to ensure consistent SI base units.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check SI base units in kinetic formulas
, requiring mass in kilograms.
Always multiply molar mass given in by before substituting it into .
- Physical reasonableness check
Room-temperature gases have temperatures near , not .
If your calculated equilibrium temperature is in the hundreds of thousands of kelvins for ordinary laboratory conditions, pause immediately to re-check your mass units.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the molar mass of argon from grams per mole to kilograms per mole: .
Recalculate the initial temperature: .
Combine the thermodynamic work and heat transfer for this isobaric expansion to reach the final equilibrium temperature: .
Evaluate the final root-mean-square speed using SI units: .
02 The student equates the work done directly to the change in translational kinetic energy of the gas rather than using the first law of thermodynamics and isobaric relations.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
or using the thermodynamic process to find
You equated the expansion work done by the gas directly to an increase in its internal translational kinetic energy. In thermodynamics, an expanding gas does positive work on its surroundings (). According to the First Law of Thermodynamics, , so expansion work without considering heat exchange () cannot simply be added as .
- Step 3Correct
Your algebraic step to extract speed from kinetic energy was mathematically consistent with your prior step, but your result was affected by the incorrect value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou properly converted the molar mass of argon from to .
You correctly computed the total mass of the gas sample as .
You correctly evaluated the initial microscopic translational kinetic energy of the gas.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the gas as a rigid mechanical particle obeying rather than a thermodynamic system governed by the First Law () and isobaric gas laws where work is done by the gas ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Thermodynamics vs. Classical Mechanics
For a macroscopic gas sample, internal energy is (for a monatomic gas), and the First Law is .
Do not set . Always relate thermodynamic work to state variables ( for isobaric processes) and find temperature changes.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the initial absolute temperature: .
Determine the final equilibrium temperature from the thermodynamic state coupling.
Use the temperature scaling relation for root-mean-square speed: .
03 The student assumes root-mean-square speed is directly proportional to temperature rather than to the square root of temperature.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set the ratio of root-mean-square speeds equal to instead of . Because kinetic energy is proportional to temperature (), root-mean-square speed scales with the square root of absolute temperature, .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the kinetic theory formula to solve for the initial absolute temperature .
You accurately converted the molar mass of argon from grams per mole to kilograms per mole.
You correctly recognized that the macroscopic expansion work at constant pressure relates to temperature change via .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou omitted the square root when setting up the speed-to-temperature ratio, treating speed as linearly proportional to temperature.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated thermal energy with particle speed. Absolute temperature is directly proportional to the average kinetic energy of the particles (), not particle velocity; since kinetic energy depends on the square of velocity (), particle speed scales as .
REASONING PATH
Your ACEpath teacher’s suggested approach- Kinetic Energy vs. Speed Scaling
Absolute temperature measures mean kinetic energy: , which implies .
Whenever temperature changes, always scale root-mean-square speed by , never by directly.
- Mental Sanity Check on Proportions
Doubling absolute temperature multiplies root-mean-square particle speed by , not by .
Before calculating, verify that the ratio exponent matches the degree of the kinematic variable ( for speed, for energy).
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the scaling relation between microscopic speed and absolute temperature: .
Substitute the initial speed and the process temperatures into the square-root ratio: .
Evaluate the square root and multiply: .
Lock it in
What unit must molar mass have when using the kinetic formula in SI units?
. Because , mass must be in kilograms to yield speed in .
Similar question
Calculate the root-mean-square speed of helium atoms () at a temperature of . Use .
Answer
. Convert . Then .
A sample of neon gas () has an initial root-mean-square speed of . The gas undergoes an isobaric heating process such that its absolute temperature doubles (). What is its final root-mean-square speed ?
Answer
. Since , the final speed is .
A cylinder contains of an ideal monatomic gas () at an initial microscopic speed . The gas expands isobarically and does of work on a piston. Find the final root-mean-square speed .
Answer
. First, . The temperature rise from isobaric work is . Thus . Finally, .