Resources
An inventor claims that a newly designed heat engine operating between a hot reservoir at and an exhaust reservoir at delivers of work while taking in of heat. Determine the maximum theoretical Carnot efficiency possible for these operating temperatures, evaluate the claimed efficiency , and state whether this engine violates the Second Law of Thermodynamics.
Answer and steps
Final answer
, ; the claim violates the Second Law of Thermodynamics because .
Steps
Calculate the Maximum Theoretical Carnot Efficiency
According to Carnot's theorem, the maximum theoretical efficiency of any heat engine operating between two thermal reservoirs depends solely on their absolute temperatures (in kelvins):
Given:
- Hot reservoir temperature,
- Cold (exhaust) reservoir temperature,
Substitute the given temperatures:
Calculate the Claimed Thermal Efficiency
The thermal efficiency of any heat engine is the ratio of useful work output () to the heat energy absorbed from the hot reservoir ():
Given:
- Work produced,
- Heat absorbed,
Substitute these values:
Evaluate the Inventor's Claim
By the Second Law of Thermodynamics (specifically Carnot's principle), no real or ideal heat engine operating between two given temperatures can have an efficiency greater than a reversible Carnot engine operating between the same two temperatures:
Comparing the two efficiencies:
Because the claimed efficiency exceeds the Carnot limit, the inventor's claim is physically impossible and violates the Second Law of Thermodynamics.
Common Pitfall: Always verify that reservoir temperatures are in absolute units (kelvins). If temperatures are given in degrees Celsius, converting to kelvins first is essential before evaluating thermal efficiencies.
Typical errors
01 A student inverts the temperature ratio in the Carnot efficiency formula, calculating 1 - T_H / T_C, which yields a negative efficiency and an incorrect comparison.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The theoretical maximum efficiency is , placing the lower temperature in the numerator. Because , inverting the fraction makes , resulting in an unphysical negative efficiency.
- Step 2
- Step 3
0.542 -1.0.
Correct\eta_{} = 54.2% > \eta_{} = 50.0%.
Because your Carnot efficiency from Step 1 was incorrect, your comparison was distorted. Furthermore, the Second Law requires that any real or ideal engine satisfy ; an efficiency greater than the Carnot limit violates the Second Law.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the formula for thermal efficiency to find the claimed efficiency.
You correctly identified that the Second Law involves comparing the operating efficiency with the theoretical Carnot limit.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou swapped the hot and cold reservoir temperatures in the Carnot efficiency formula, placing over instead of over , and interpreted an efficiency exceeding the Carnot limit as acceptable rather than a violation.
REASONING PATH
Your ACEpath teacher’s suggested approach- Carnot Efficiency Ratio Check
, where
Always verify that the fraction subtracted from is less than (smaller absolute temperature on top, larger on the bottom) so that .
- Second Law Criterion
No engine operating between two temperatures can exceed the Carnot limit:
If , the claim is physically impossible and violates the Second Law of Thermodynamics.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the correct Carnot limit: .
Recall the claimed efficiency from your Step 2: .
Compare the two values: since , the engine exceeds the maximum theoretical efficiency.
, ; the claim violates the Second Law of Thermodynamics because .
02 A student calculates the claimed efficiency by dividing work done by heat rejected instead of heat input, yielding 650 / 550 ≈ 1.18.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Thermal efficiency is defined as the ratio of useful work output to total heat input, . You divided the work by the rejected heat instead of the heat input .
- Step 3
Yes, it violates the Second Law because is greater than .
CorrectYes, it violates the Second Law of Thermodynamics because .
Your qualitative conclusion is correct, but your reasoning relies on the incorrect efficiency value of from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the Carnot efficiency formula with absolute temperatures.
You recognized that an engine efficiency exceeding the Carnot efficiency violates the Second Law of Thermodynamics.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved for the exhausted heat and placed it in the denominator of the efficiency expression instead of the input heat .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the energy input with energy rejected when defining thermal efficiency. Thermal efficiency measures 'what you get out () divided by what you pay for ()', not the ratio of work to waste heat.
REASONING PATH
Your ACEpath teacher’s suggested approach- Efficiency Input-Output Definition
For any heat engine, thermal efficiency is .
Always place total heat absorbed from the hot reservoir () in the denominator.
- Sanity Check on Engine Efficiency
By the First Law of Thermodynamics, for any engine rejecting heat, so (or ).
If your calculated engine efficiency exceeds (or ), check immediately whether you divided by or switched input and output.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the heat input: and work done: .
Compute the claimed thermal efficiency: .
Compare the claimed efficiency to the Carnot efficiency: .
Conclude that because , the claim violates the Second Law of Thermodynamics.
, ; the claim violates the Second Law of Thermodynamics because .
03 A student omits subtracting from 1 when finding Carnot efficiency and computes T_C / T_H = 0.50 as the fraction of heat rejected, incorrectly concluding that the claimed efficiency is valid.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Carnot efficiency is defined as , not . An efficiency of () would mean producing twice as much work as the total heat absorbed, which violates energy conservation.
- Step 2
- Step 3
"No, it does not violate the Second Law because 0.542 is less than 2.0."
Correct"Yes, it violates the Second Law of Thermodynamics because ."
Because your calculated Carnot efficiency was erroneously set to , your comparison led to an incorrect verdict. Comparing the true values shows , which violates the Second Law.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the definition of actual thermal efficiency as work output divided by heat absorbed: .
You substituted the correct values of and to find .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the ratio of hot-to-cold temperatures instead of the Carnot efficiency relation . Because thermal efficiency represents the fraction of input energy converted to work, any engine efficiency must be less than (or ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Efficiency Upper Bound Sanity Check
For any heat engine, efficiency represents . It must always be strictly between and ().
Whenever you compute an efficiency greater than (such as ), immediately stop and check your formula.
- Carnot Efficiency Formula
The maximum theoretical efficiency between two reservoirs at absolute temperatures and is .
Place in the numerator and in the denominator, then subtract the fraction from .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate theoretical Carnot efficiency: .
Calculate claimed engine efficiency: .
Compare the two efficiencies: .
Apply the Second Law of Thermodynamics: No engine can exceed the Carnot limit operating between the same two temperatures.
, ; the claim violates the Second Law of Thermodynamics because .
Lock it in
What is the formula for the maximum theoretical (Carnot) efficiency between reservoirs at and ?
. Remember: cold over hot (), so the subtracted fraction is always less than .
Similar question
A heat engine operates between temperatures of and . Calculate its maximum theoretical efficiency .
Answer
.
An inventor claims an engine absorbs from a reservoir at and produces of work while exhausting heat to a reservoir at . Does this claim violate the Second Law of Thermodynamics?
Answer
. The claimed efficiency is . Since (), the claim violates the Second Law of Thermodynamics.
A geothermal power plant operates with steam at and cooling water at . If the plant achieves of its maximum theoretical Carnot efficiency, what is its actual operating thermal efficiency?
Answer
First convert temperatures to kelvins: and . Maximum efficiency: . Actual efficiency: .