Resources

A high-velocity micro-particle dust shield on a spacecraft encounters an interstellar particle stream. A single cosmic dust grain of mass m=450 μgm = 450\,\mu\text{g} travels at a speed of vi=18.0 km/sv_i = 18.0\text{ km/s} relative to the shield. Upon striking the sacrificial aerogel tile normally, the dust grain is brought to rest over a microscopic penetration distance that takes Δt=1.25 μs\Delta t = 1.25\,\mu\text{s}. (a) Express the mass of the grain in kilograms and its initial velocity in meters per second. (b) Calculate the magnitude of the impulse delivered to the grain in standard SI units (N⋅s\text{N}\cdot\text{s}). (c) Determine the magnitude of the average stopping force in kilonewtons (kN\text{kN}).

Answer and steps

Final answer

(a) m=4.50×10−7 kgm = 4.50 \times 10^{-7}\text{ kg}, vi=1.80×104 m/sv_i = 1.80 \times 10^4\text{ m/s}; (b) J=8.10×10−3 N⋅sJ = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}; (c) Favg=6.48 kNF_{\text{avg}} = 6.48\text{ kN}.

Steps

Part (a): Unit Conversions to Standard SI Units

To use standard mechanical equations, all physical quantities must be expressed in SI base units (kg\text{kg}, m\text{m}, s\text{s}).

  1. Mass (mm): Recall that 1 μg=10−6 g1\ \mu\text{g} = 10^{-6}\text{ g} and 1 g=10−3 kg1\text{ g} = 10^{-3}\text{ kg}, which gives 1 μg=10−9 kg1\ \mu\text{g} = 10^{-9}\text{ kg}: m=450 μg=450×10−9 kg=4.50×10−7 kgm = 450\ \mu\text{g} = 450 \times 10^{-9}\text{ kg} = 4.50 \times 10^{-7}\text{ kg}
  2. Velocity (viv_i): Since 1 km=103 m1\text{ km} = 10^3\text{ m}: vi=18.0 km/s=18.0×103 m/s=1.80×104 m/sv_i = 18.0\text{ km/s} = 18.0 \times 10^3\text{ m/s} = 1.80 \times 10^4\text{ m/s}

Part (b): Magnitude of the Impulse Delivered to the Grain

By the impulse-momentum theorem, the impulse J⃗\vec{J} exerted on an object equals its change in linear momentum: J⃗=Δp⃗=p⃗f−p⃗i\vec{J} = \Delta \vec{p} = \vec{p}_f - \vec{p}_i

Taking the direction of initial motion as positive:

  • Initial momentum: pi=mvip_i = m v_i
  • Final momentum: pf=0p_f = 0 (the particle is brought to rest)

The change in momentum is: Δp=0−mvi=−mvi\Delta p = 0 - m v_i = -m v_i

The magnitude of the impulse is therefore: J=∣Δp∣=mviJ = |\Delta p| = m v_i

Substitute the SI values from Part (a): J=(4.50×10−7 kg)⋅(1.80×104 m/s)=8.10×10−3 N⋅sJ = (4.50 \times 10^{-7}\text{ kg}) \cdot (1.80 \times 10^4\text{ m/s}) = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}

Common Pitfall: A microgram (μg\mu\text{g}) is one-millionth of a gram, not a kilogram. Converting directly using 10−610^{-6} instead of 10−910^{-9} leads to an answer off by a factor of 10310^3.


Part (c): Magnitude of the Average Stopping Force

Impulse is also related to the average force FavgF_{\text{avg}} exerted over the collision time interval Δt\Delta t: J=FavgΔtJ = F_{\text{avg}} \Delta t

Rearranging to solve for the average force: Favg=JΔtF_{\text{avg}} = \frac{J}{\Delta t}

Given Δt=1.25 μs=1.25×10−6 s\Delta t = 1.25\ \mu\text{s} = 1.25 \times 10^{-6}\text{ s}: Favg=8.10×10−3 N⋅s1.25×10−6 s=6480 NF_{\text{avg}} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N}

Convert newtons to kilonewtons (1 kN=103 N1\text{ kN} = 10^3\text{ N}): Favg=6480 N103=6.48 kNF_{\text{avg}} = \frac{6480\text{ N}}{10^3} = 6.48\text{ kN}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student converts micrograms directly to kilograms using the factor 10⁻⁶ instead of converting from grams to kilograms, resulting in an overestimated mass and downstream values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=450×10−6 kg=4.50×10−4 kg  ⟹  vi=18.0×103 m/s=1.80×104 m/sm = 450 \times 10^{-6}\text{ kg} = 4.50 \times 10^{-4}\text{ kg} \implies v_i = 18.0 \times 10^3\text{ m/s} = 1.80 \times 10^4\text{ m/s}

    Correct

    m=450×10−9 kg=4.50×10−7 kgm = 450 \times 10^{-9}\text{ kg} = 4.50 \times 10^{-7}\text{ kg}, vi=1.80×104 m/sv_i = 1.80 \times 10^4\text{ m/s}

    You converted the velocity correctly, but the microgram prefix applies to grams (g\text{g}), not kilograms (kg\text{kg}). Since 1 μg=10−6 g1\,\mu\text{g} = 10^{-6}\text{ g} and 1 g=10−3 kg1\text{ g} = 10^{-3}\text{ kg}, 1 μg=10−9 kg1\,\mu\text{g} = 10^{-9}\text{ kg}, giving m=4.50×10−7 kgm = 4.50 \times 10^{-7}\text{ kg}.

  2. Step 2

    J=m⋅vi=(4.50×10−4 kg)(1.80×104 m/s)  ⟹  J=8.10 N⋅sJ = m \cdot v_i = (4.50 \times 10^{-4}\text{ kg})(1.80 \times 10^4\text{ m/s}) \implies J = 8.10\text{ N}\cdot\text{s}

    Correct

    J=mvi=(4.50×10−7 kg)(1.80×104 m/s)=8.10×10−3 N⋅sJ = m v_i = (4.50 \times 10^{-7}\text{ kg})(1.80 \times 10^4\text{ m/s}) = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}

    Your formula J=mviJ = m v_i and arithmetic are completely sound, but your result is 10310^3 times too large because of the mass value from Step 1.

  3. Step 3

    Favg=JΔt=8.101.25×10−6  ⟹  Favg=6.48×106 N=6480 kNF_{\text{avg}} = \frac{J}{\Delta t} = \frac{8.10}{1.25 \times 10^{-6}} \implies F_{\text{avg}} = 6.48 \times 10^6\text{ N} = 6480\text{ kN}

    Correct

    Favg=JΔt=8.10×10−3 N⋅s1.25×10−6 s=6480 N=6.48 kNF_{\text{avg}} = \frac{J}{\Delta t} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N} = 6.48\text{ kN}

    You correctly related average force to impulse and time, and your conversion from newtons to kilonewtons was accurate. The final numerical value is off by a factor of 10310^3 due to the propagated impulse value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the velocity from km/s\text{km/s} to standard SI units of m/s\text{m/s}.

You correctly applied the impulse-momentum theorem J=mviJ = m v_i for an object brought to rest.

You correctly related average force to impulse via Favg=JΔtF_{\text{avg}} = \frac{J}{\Delta t} and converted newtons to kilonewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion with non-base SI mass unit

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You attached the prefix factor 10−610^{-6} directly to kilograms instead of converting from grams to kilograms (1 μg=10−6 g=10−9 kg1\,\mu\text{g} = 10^{-6}\text{ g} = 10^{-9}\text{ kg}). Because the SI base unit of mass is the kilogram while metric prefixes apply to grams, a two-step conversion is necessary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Step Mass Conversion to SI Base Units
  • In the metric system, prefixes attach to the gram (g\text{g}), whereas standard mechanics equations require kilograms (kg\text{kg}).

  • Always convert prefixed mass units to grams first (1 μg=10−6 g1\,\mu\text{g} = 10^{-6}\text{ g}), then convert grams to kilograms (10−6 g×10−3 kg/g=10−9 kg10^{-6}\text{ g} \times 10^{-3}\text{ kg/g} = 10^{-9}\text{ kg}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mass using the correct factor: m=450 μg=450×10−9 kg=4.50×10−7 kgm = 450\,\mu\text{g} = 450 \times 10^{-9}\text{ kg} = 4.50 \times 10^{-7}\text{ kg}.

  2. Substitute the correct mass into the impulse formula: J=mvi=(4.50×10−7 kg)(1.80×104 m/s)=8.10×10−3 N⋅sJ = m v_i = (4.50 \times 10^{-7}\text{ kg})(1.80 \times 10^4\text{ m/s}) = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}.

  3. Compute the average stopping force: Favg=JΔt=8.10×10−3 N⋅s1.25×10−6 s=6480 N=6.48 kNF_{\text{avg}} = \frac{J}{\Delta t} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N} = 6.48\text{ kN}.

Final answer

(a) m=4.50×10−7 kgm = 4.50 \times 10^{-7}\text{ kg}, vi=1.80×104 m/sv_i = 1.80 \times 10^4\text{ m/s}; (b) J=8.10×10−3 N⋅sJ = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}; (c) Favg=6.48 kNF_{\text{avg}} = 6.48\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out two conversion factors when dealing with prefixed mass units: first to grams, then to kilograms.

  • Check physical magnitudes: a microscopic dust grain should deliver a tiny impulse (on the order of millinewton-seconds), not several newton-seconds.

  • Try the targeted flashcards and practice problems below to master metric mass conversions in momentum problems.

OverviewACEpath Teacher's Diagnosis

02 A student calculates the stopping force using kinetic energy instead of impulse, incorrectly equating force to work divided by time rather than stopping distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=450×10−9 kg=4.50×10−7 kg  ⟹  vi=18.0×103 m/s=1.80×104 m/sm = 450 \times 10^{-9}\text{ kg} = 4.50 \times 10^{-7}\text{ kg} \implies v_i = 18.0 \times 10^3\text{ m/s} = 1.80 \times 10^4\text{ m/s}

  2. Step 2

    J=m⋅vi=(4.50×10−7 kg)(1.80×104 m/s)  ⟹  J=8.10×10−3 N⋅sJ = m \cdot v_i = (4.50 \times 10^{-7}\text{ kg})(1.80 \times 10^4\text{ m/s}) \implies J = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}

  3. Step 3

    KE=(12)mvi2=0.5×(4.50×10−7)×(1.80×104)2=72.9 J  ⟹  Favg=KEΔt=72.91.25×10−6=5.832×107 N\text{KE} = \left(\frac{1}{2}\right) m v_i^2 = 0.5 \times (4.50 \times 10^{-7}) \times (1.80 \times 10^4)^2 = 72.9\text{ J} \implies F_{\text{avg}} = \frac{\text{KE}}{\Delta t} = \frac{72.9}{1.25 \times 10^{-6}} = 5.832 \times 10^7\text{ N}

    Correct

    Favg=JΔt=8.10×10−3 N⋅s1.25×10−6 s=6480 NF_{\text{avg}} = \frac{J}{\Delta t} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N}

    You divided energy by time, which gives average power (in watts), not average force. Average force over a time interval is determined by the rate of change of momentum: Favg=JΔtF_{\text{avg}} = \frac{J}{\Delta t}.

  4. Step 4

    Favg=58320 kNF_{\text{avg}} = 58320\text{ kN}

    Correct

    Favg=6.48 kNF_{\text{avg}} = 6.48\text{ kN}

    This conversion to kilonewtons carried forward the incorrect numerical force value from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You properly converted the micro-scale mass and high-velocity units into standard SI units.

You used the impulse-momentum relation accurately to calculate the total impulse delivered during the impact.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating average force to energy divided by time

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the relationship between work, energy, and force over distance (W=FdW = F d) with the relationship between impulse, momentum, and force over time (J=FΔtJ = F \Delta t). Dividing kinetic energy by time yields average power, not average force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match force to time using impulse
  • Average force over a time interval Δt\Delta t is Favg=ΔpΔt=JΔtF_{\text{avg}} = \frac{\Delta p}{\Delta t} = \frac{J}{\Delta t}.

  • When a collision duration Δt\Delta t is provided, compute average force by dividing impulse JJ by Δt\Delta t, not energy by Δt\Delta t.

Dimensional check for energy over time
  • EnergyTime=JoulesSeconds=Watts≠Newtons\frac{\text{Energy}}{\text{Time}} = \frac{\text{Joules}}{\text{Seconds}} = \text{Watts} \neq \text{Newtons}.

  • Always verify units before concluding; force must have units of N\text{N} or kg⋅m/s2\text{kg}\cdot\text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the impulse-force relationship: J=FavgΔtJ = F_{\text{avg}} \Delta t.

  2. Solve for the average force: Favg=JΔt=8.10×10−3 N⋅s1.25×10−6 s=6480 NF_{\text{avg}} = \frac{J}{\Delta t} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N}.

  3. Convert the force to kilonewtons: Favg=6480 N1000 N/kN=6.48 kNF_{\text{avg}} = \frac{6480\text{ N}}{1000\text{ N/kN}} = 6.48\text{ kN}.

Final answer

Favg=6.48 kNF_{\text{avg}} = 6.48\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between the work-energy theorem (Wnet=Favgd=ΔKW_{\text{net}} = F_{\text{avg}} d = \Delta K) and the impulse-momentum theorem (J=FavgΔt=ΔpJ = F_{\text{avg}} \Delta t = \Delta p).

  • Practice checking base units on derived formulas to ensure energy rate (extW ext{W}) is not mistaken for force (extN ext{N}).

OverviewACEpath Teacher's Diagnosis

03 A student fails to convert the stopping force from newtons to kilonewtons in the final step, reporting the answer in newtons.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=4.50×10−7 kg  ⟹  vi=1.80×104 m/sm = 4.50 \times 10^{-7}\text{ kg} \implies v_i = 1.80 \times 10^4\text{ m/s}

  2. Step 2

    J=(4.50×10−7 kg)(1.80×104 m/s)  ⟹  J=8.10×10−3 N⋅sJ = (4.50 \times 10^{-7}\text{ kg})(1.80 \times 10^4\text{ m/s}) \implies J = 8.10 \times 10^{-3}\text{ N}\cdot\text{s}

  3. Step 3

    Favg=JΔt=(8.10×10−3 N⋅s)(1.25×10−6 s)F_{\text{avg}} = \frac{J}{\Delta t} = \frac{(8.10 \times 10^{-3}\text{ N}\cdot\text{s})}{(1.25 \times 10^{-6}\text{ s})}

  4. Step 4

    Favg=6480 kNF_{\text{avg}} = 6480\text{ kN}

    Correct

    Favg=6480 N=6.48 kNF_{\text{avg}} = 6480\text{ N} = 6.48\text{ kN}

    The quotient 8.10×10−3 N⋅s1.25×10−6 s\frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} yields 6480 N6480\text{ N}. Since the question asks for the answer in kilonewtons (kN\text{kN}), you must divide by 10310^3, giving 6.48 kN6.48\text{ kN}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass and initial velocity into standard SI units.

You accurately calculated the impulse using the impulse-momentum theorem.

You correctly set up the formula for average force in terms of impulse and collision time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion error

You calculated the numerical magnitude of the force in standard newtons (6480 N6480\text{ N}) but wrote kN\text{kN} without dividing by 10001000.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Attaching the requested unit prefix directly to the base-unit calculation instead of applying the appropriate conversion factor (1 kN=103 N1\text{ kN} = 10^3\text{ N}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Base SI output vs. prefixed target
  • Substituting base SI units (kg\text{kg}, m\text{m}, s\text{s}) into dynamic equations yields results in base SI units (N\text{N}, not kN\text{kN}).

  • Write down the intermediate result with its base SI unit first, then convert explicitly to the requested prefixed unit.

Kilonewton conversion factor
  • 1 kN=103 N=1000 N1\text{ kN} = 10^3\text{ N} = 1000\text{ N}, which means 1 N=10−3 kN1\text{ N} = 10^{-3}\text{ kN}.

  • Divide values in newtons by 10310^3 when converting to kilonewtons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the division in standard SI units: Favg=8.10×10−3 N⋅s1.25×10−6 s=6480 NF_{\text{avg}} = \frac{8.10 \times 10^{-3}\text{ N}\cdot\text{s}}{1.25 \times 10^{-6}\text{ s}} = 6480\text{ N}.

  2. Convert newtons to kilonewtons using 1 kN=1000 N1\text{ kN} = 1000\text{ N}: Favg=6480 N1000 N/kN=6.48 kNF_{\text{avg}} = \frac{6480\text{ N}}{1000\text{ N/kN}} = 6.48\text{ kN}.

Final answer

Favg=6.48 kNF_{\text{avg}} = 6.48\text{ kN}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the unit of your intermediate result in standard SI units before applying prefixes.

  • Double-check whether the final prompt requests units with prefixes such as kilo- (10310^3), mega- (10610^6), or milli- (10−310^{-3}).

Lock it in

Similar question

01

A micrometeorite of mass m=250 μgm = 250\,\mu\text{g} strikes a solar panel at v=12.0 km/sv = 12.0\text{ km/s} and embeds itself without bouncing. Calculate the magnitude of the impulse delivered to the solar panel in standard SI units.

Answer

J=3.00×10−3 N⋅sJ = 3.00 \times 10^{-3}\text{ N}\cdot\text{s}. Convert mass: m=250×10−9 kg=2.50×10−7 kgm = 250 \times 10^{-9}\text{ kg} = 2.50 \times 10^{-7}\text{ kg}. Convert speed: v=1.20×104 m/sv = 1.20 \times 10^4\text{ m/s}. Impulse: J=mv=(2.50×10−7 kg)(1.20×104 m/s)=3.00×10−3 N⋅sJ = m v = (2.50 \times 10^{-7}\text{ kg})(1.20 \times 10^4\text{ m/s}) = 3.00 \times 10^{-3}\text{ N}\cdot\text{s}.

02

An iron nanoparticle of mass m=1.50 ngm = 1.50\text{ ng} (nanograms) moving at vi=40.0 km/sv_i = 40.0\text{ km/s} is brought to rest in an aerogel collector over a time interval Δt=0.200 μs\Delta t = 0.200\,\mu\text{s}. Determine the magnitude of the average force exerted on the collector during the impact in newtons.

Answer

Favg=0.300 NF_{\text{avg}} = 0.300\text{ N}. Convert mass: 1 ng=10−9 g=10−12 kg1\text{ ng} = 10^{-9}\text{ g} = 10^{-12}\text{ kg}, so m=1.50×10−12 kgm = 1.50 \times 10^{-12}\text{ kg}. Speed: vi=4.00×104 m/sv_i = 4.00 \times 10^4\text{ m/s}. Time: Δt=2.00×10−7 s\Delta t = 2.00 \times 10^{-7}\text{ s}. Impulse: J=mvi=6.00×10−8 N⋅sJ = m v_i = 6.00 \times 10^{-8}\text{ N}\cdot\text{s}. Average force: Favg=JΔt=6.00×10−8 N⋅s2.00×10−7 s=0.300 NF_{\text{avg}} = \frac{J}{\Delta t} = \frac{6.00 \times 10^{-8}\text{ N}\cdot\text{s}}{2.00 \times 10^{-7}\text{ s}} = 0.300\text{ N}.

03

A spacecraft thruster expels a stream of propellant micro-droplets. Each droplet has a mass of m=32.0 μgm = 32.0\,\mu\text{g} and leaves the nozzle at v=2500 m/sv = 2500\text{ m/s}. If the thruster fires N=5.00×105N = 5.00 \times 10^5 such droplets per second, calculate the average thrust force produced in newtons.

Answer

Fthrust=40.0 NF_{\text{thrust}} = 40.0\text{ N}. Mass of one droplet: m=32.0×10−9 kg=3.20×10−8 kgm = 32.0 \times 10^{-9}\text{ kg} = 3.20 \times 10^{-8}\text{ kg}. Total mass ejected per second: ΔmΔt=N⋅m=(5.00×105)(3.20×10−8 kg)=1.60×10−2 kg/s\frac{\Delta m}{\Delta t} = N \cdot m = (5.00 \times 10^5)(3.20 \times 10^{-8}\text{ kg}) = 1.60 \times 10^{-2}\text{ kg/s}. Thrust force: F=(ΔmΔt)v=(1.60×10−2 kg/s)(2500 m/s)=40.0 NF = \left(\frac{\Delta m}{\Delta t}\right) v = (1.60 \times 10^{-2}\text{ kg/s})(2500\text{ m/s}) = 40.0\text{ N}.

Loading workspace…