Resources

A student examining an isothermal expansion reasons that because the temperature of an ideal gas remains constant (ΔT=0\Delta T = 0), the heat transferred must be zero (Q=0Q = 0). To evaluate this concept, consider 1.00 mol1.00\text{ mol} of an ideal gas expanding isothermally and reversibly at a constant temperature of T=350 KT = 350\text{ K} from an initial volume of V1=0.0100 m3V_1 = 0.0100\text{ m}^3 to a final volume of V2=0.0300 m3V_2 = 0.0300\text{ m}^3 (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})). (a) State the change in internal energy ΔU\Delta U of the gas and explain why it takes this value. (b) Calculate the work done by the gas WW. (c) Use the First Law of Thermodynamics to calculate the heat QQ exchanged, and determine whether heat entered or left the system.

Answer and steps

Final answer

(a) ΔU=0 J\Delta U = 0\text{ J}, because the internal energy of an ideal gas depends solely on temperature; (b) W=3.20×103 JW = 3.20 \times 10^3\text{ J}; (c) Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J} (heat entered the system from the surroundings).

Steps

Part (a): Determine the Change in Internal Energy (ΔU\Delta U)

For an ideal gas, internal energy UU depends solely on absolute temperature TT because there are no intermolecular forces between the particles:

ΔU=nCvΔT\Delta U = n C_v \Delta T

Since the process is isothermal, the temperature remains constant throughout (ΔT=0 K\Delta T = 0\text{ K}). Therefore:

ΔU=0 J\Delta U = 0\text{ J}

Common Pitfall: Do not confuse an isothermal process (ΔT=0\Delta T = 0) with an adiabatic process (Q=0Q = 0). Even though the temperature does not change, heat transfer can still occur if work is done.


Part (b): Calculate the Work Done by the Gas (WW)

During a reversible isothermal expansion, the pressure varies with volume according to the ideal gas law, P=nRTVP = \frac{nRT}{V}. The work done by the gas as it expands from volume V1V_1 to V2V_2 is given by:

W=∫V1V2P dV=∫V1V2nRTV dV=nRTln⁡(V2V1)W = \int_{V_1}^{V_2} P \, dV = \int_{V_1}^{V_2} \frac{nRT}{V} \, dV = nRT \ln\left(\frac{V_2}{V_1}\right)

Substitute the given values into the equation:

  • n=1.00 moln = 1.00\text{ mol}
  • R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})
  • T=350 KT = 350\text{ K}
  • V1=0.0100 m3V_1 = 0.0100\text{ m}^3
  • V2=0.0300 m3V_2 = 0.0300\text{ m}^3

W=(1.00 mol)(8.314 J/(mol⋅K))(350 K)ln⁡(0.0300 m30.0100 m3)W = (1.00\text{ mol})\left(8.314\text{ J}/(\text{mol}\cdot\text{K})\right)(350\text{ K}) \ln\left(\frac{0.0300\text{ m}^3}{0.0100\text{ m}^3}\right)

W=(2909.9 J)⋅ln⁡(3)≈(2909.9 J)⋅1.0986≈3.20×103 JW = (2909.9\text{ J}) \cdot \ln(3) \approx (2909.9\text{ J}) \cdot 1.0986 \approx 3.20 \times 10^3\text{ J}

The gas expands against the surroundings, so the work done by the gas is positive: W=3.20×103 JW = 3.20 \times 10^3\text{ J}.


Part (c): Determine the Heat Exchanged (QQ)

According to the First Law of Thermodynamics:

ΔU=Q−W\Delta U = Q - W

Where WW is the work done by the gas. Substituting the values found in parts (a) and (b):

0=Q−3.20×103 J0 = Q - 3.20 \times 10^3\text{ J}

Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J}

Because Q>0Q > 0, heat entered the system from the surroundings.

As the gas expands and does work on the surroundings, it would naturally cool down; an equal amount of heat must continuously flow into the gas from a thermal reservoir to maintain a constant temperature of 350 K350\text{ K}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student conflates constant temperature with an adiabatic process, incorrectly asserting that Q = 0 and using it to deduce that work must be zero or internal energy changes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔU=0 J\Delta U = 0\text{ J} because temperature is constant (ΔT=0)(\Delta T = 0) and UU depends on TT.

  2. Step 2

    W=nRTln⁡(V2V1)  ⟹  W=(1.00)(8.314)(350)ln⁡(0.03000.0100)=3197 JW = nRT \ln\left(\frac{V_2}{V_1}\right) \implies W = (1.00)(8.314)(350)\ln\left(\frac{0.0300}{0.0100}\right) = 3197\text{ J}

  3. Step 3

    Since the process is isothermal, no heat is added, so Q=0 JQ = 0\text{ J}. No heat entered or left the system.

    Correct

    ΔU=Q−W  ⟹  0=Q−3197 J  ⟹  Q=+3.20×103 J\Delta U = Q - W \implies 0 = Q - 3197\text{ J} \implies Q = +3.20 \times 10^3\text{ J} (heat entered the system).

    An isothermal process keeps temperature constant (ΔT=0\Delta T = 0), but it is not adiabatic (Q=0Q = 0). As the gas expands and does work on its surroundings, heat must flow into the system to prevent its temperature from dropping.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the change in internal energy is zero for an isothermal process of an ideal gas.

You stated the correct physical principle that the internal energy of an ideal gas depends solely on temperature.

You applied the correct integral formula for isothermal work and obtained the correct numerical result.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Isothermal vs. Adiabatic Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an isothermal condition (constant temperature, ΔT=0\Delta T = 0) as an adiabatic condition (no heat exchange, Q=0Q = 0), overlooking the energy balance required by the First Law of Thermodynamics when work is done.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Isothermal from Adiabatic
  • Isothermal means ΔT=0\Delta T = 0 (and ΔU=0\Delta U = 0 for an ideal gas). Adiabatic means Q=0Q = 0.

  • Never assume Q=0Q = 0 simply because temperature is constant; check whether work is being performed.

Apply the First Law of Thermodynamics
  • The First Law states ΔU=Q−W\Delta U = Q - W.

  • Substitute your known values of ΔU\Delta U and WW to solve algebraically for QQ rather than guessing based on the process name.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the First Law of Thermodynamics: ΔU=Q−W\Delta U = Q - W.

  2. Substitute the known values: 0 J=Q−3197 J0\text{ J} = Q - 3197\text{ J}.

  3. Solve for heat: Q=+3197 J≈+3.20×103 JQ = +3197\text{ J} \approx +3.20 \times 10^3\text{ J}.

  4. Interpret the sign: because Q>0Q > 0, heat entered the gas from the surroundings.

Final answer

(a) ΔU=0 J\Delta U = 0\text{ J}; (b) W=3.20×103 JW = 3.20 \times 10^3\text{ J}; (c) Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J} (heat entered the system).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct thermodynamic definitions: isothermal (ΔT=0\Delta T = 0), isobaric (ΔP=0\Delta P = 0), isochoric (W=0W = 0), and adiabatic (Q=0Q = 0).

  • Always write down ΔU=Q−W\Delta U = Q - W to verify energy balance whenever any two of the three quantities are known.

  • Practice isothermal expansion problems by visualizing heat entering from a thermal reservoir to replenish the energy lost as expansion work.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the sign convention in the first law of thermodynamics, writing ΔU = Q + W where W is the work done by the gas, resulting in Q = -3197 J and concluding heat left the system.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔU=0 J\Delta U = 0\text{ J} because the temperature is constant and internal energy of an ideal gas depends only on TT.

  2. Step 2

    W=nRTln⁡(V2V1)  ⟹  W=(1.00)(8.314)(350)ln⁡(3)  ⟹  W=3197 JW = nRT \ln\left(\frac{V_2}{V_1}\right) \implies W = (1.00)(8.314)(350)\ln(3) \implies W = 3197\text{ J}

  3. Step 3

    ΔU=Q+W  ⟹  0=Q+3197 J  ⟹  Q=−3197 J  ⟹  \Delta U = Q + W \implies 0 = Q + 3197\text{ J} \implies Q = -3197\text{ J} \implies Because QQ is negative, heat left the system.

    Correct

    ΔU=Q−W  ⟹  0=Q−3197 J  ⟹  Q=+3197 J\Delta U = Q - W \implies 0 = Q - 3197\text{ J} \implies Q = +3197\text{ J} (heat entered the system)

    When WW is defined as the work done by the system on its surroundings, the First Law is ΔU=Q−W\Delta U = Q - W. Alternatively, if using the convention ΔU=Q+Won\Delta U = Q + W_{\text{on}}, the work done on the gas during expansion is negative (Won=−3197 JW_{\text{on}} = -3197\text{ J}). Either way, expanding against external pressure requires heat to enter the system (Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J}) to keep the temperature constant.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated that the change in internal energy is zero because temperature is constant.

You applied the isothermal work formula W=nRTln⁡(V2/V1)W = nRT \ln(V_2/V_1) accurately with proper numerical substitution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention confusion in the First Law of Thermodynamics

You treated work done by the gas as a positive addition to internal energy in the equation ΔU=Q+W\Delta U = Q + W.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the physics sign convention (ΔU=Q−Wby\Delta U = Q - W_{\text{by}}) with the IUPAC/chemistry sign convention (ΔU=Q+Won\Delta U = Q + W_{\text{on}}), substituting a positive value for expansion work into an additive equation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clarify Work Direction
  • An expanding gas pushes against surroundings, expending energy (Wby>0W_{\text{by}} > 0, while Won<0W_{\text{on}} < 0).

  • Identify whether your formula defines WW as work done BY the gas or ON the gas before writing signs.

Select the Matching First Law Form
  • Use ΔU=Q−W\Delta U = Q - W when WW is work done by the gas, or ΔU=Q+W\Delta U = Q + W when WW is work done on the gas.

  • Check that an expanding gas doing work with ΔU=0\Delta U = 0 requires incoming heat (Q>0Q > 0) to prevent cooling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the First Law using work done by the gas: ΔU=Q−W\Delta U = Q - W

  2. Substitute ΔU=0 J\Delta U = 0\text{ J} and W=3197 JW = 3197\text{ J}: 0=Q−3197 J0 = Q - 3197\text{ J}

  3. Solve for QQ: Q=+3197 J≈+3.20×103 JQ = +3197\text{ J} \approx +3.20 \times 10^3\text{ J}

  4. Interpret the sign: because Q>0Q > 0, heat entered the system from the surroundings.

Final answer

(a) ΔU=0 J\Delta U = 0\text{ J}; (b) W=3.20×103 JW = 3.20 \times 10^3\text{ J}; (c) Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J} (heat entered the system)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize which sign convention your physics course uses: ΔU=Q−Wby\Delta U = Q - W_{\text{by}} vs. ΔU=Q+Won\Delta U = Q + W_{\text{on}}.

  • Perform a quick physical sanity check: during an expansion, the gas expends energy, so thermal energy must flow in to keep temperature constant.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the ratio of volumes in the isothermal work formula, using ln(V₁/V₂), which yields negative work and leads to the incorrect conclusion that heat left the system.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔU=0 J\Delta U = 0\text{ J} because internal energy depends only on temperature for an ideal gas and ΔT=0\Delta T = 0.

  2. Step 2

    W=nRTln⁡(V1/V2)  ⟹  W=(1.00)(8.314)(350)ln⁡(0.01000.0300)  ⟹  W=2909.9ln⁡(13)  ⟹  W=−3197 JW = nRT \ln(V_1/V_2) \implies W = (1.00)(8.314)(350) \ln\left(\frac{0.0100}{0.0300}\right) \implies W = 2909.9 \ln\left(\frac{1}{3}\right) \implies W = -3197\text{ J}

    Correct

    W=nRTln⁡(V2V1)=(1.00 mol)(8.314 J/(mol⋅K))(350 K)ln⁡(0.03000.0100)≈+3.20×103 JW = nRT \ln\left(\frac{V_2}{V_1}\right) = (1.00\text{ mol})(8.314\text{ J}/(\text{mol}\cdot\text{K}))(350\text{ K}) \ln\left(\frac{0.0300}{0.0100}\right) \approx +3.20 \times 10^3\text{ J}

    You inverted the volume ratio inside the logarithm. The work done by an expanding gas is W=∫V1V2P dV=nRTln⁡(Vfinal/Vinitial)=nRTln⁡(V2/V1)W = \int_{V_1}^{V_2} P\,dV = nRT \ln(V_{\text{final}}/V_{\text{initial}}) = nRT \ln(V_2/V_1). Because the gas expands (V2>V1V_2 > V_1), the gas does positive work on the surroundings.

  3. Step 3

    ΔU=Q−W  ⟹  0=Q−(−3197 J)  ⟹  Q=−3197 J  ⟹  \Delta U = Q - W \implies 0 = Q - (-3197\text{ J}) \implies Q = -3197\text{ J} \implies Since QQ is negative, heat left the system.

    Correct

    ΔU=Q−W  ⟹  0=Q−3.20×103 J  ⟹  Q=+3.20×103 J\Delta U = Q - W \implies 0 = Q - 3.20 \times 10^3\text{ J} \implies Q = +3.20 \times 10^3\text{ J} (heat entered the system)

    You set up the First Law equation ΔU=Q−W\Delta U = Q - W correctly, but your negative value of WW from the previous step propagated here, resulting in an incorrect sign for QQ and the wrong direction of heat flow.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the internal energy of an ideal gas depends only on temperature, leading to ΔU=0 J\Delta U = 0\text{ J}.

You properly recalled the First Law of Thermodynamics in the form ΔU=Q−W\Delta U = Q - W.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted volume ratio in isothermal work

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You reversed the integration limits when integrating P dVP\,dV, substituting the initial volume in the numerator instead of the final volume: ln⁡(V1/V2)\ln(V_1/V_2) instead of ln⁡(V2/V1)\ln(V_2/V_1). In an expansion, V2>V1V_2 > V_1, so the gas pushes outward and must do positive work (W>0W > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Expansion vs. Compression Work Sign
  • For an expansion (Vf>ViV_f > V_i), work done by the gas is positive (W>0W > 0). For a compression (Vf<ViV_f < V_i), work done by the gas is negative (W<0W < 0).

  • Always check whether the volume increases or decreases before calculating, and ensure the logarithmic argument is VfinalVinitial\frac{V_{\text{final}}}{V_{\text{initial}}}.

Isothermal Heat Flow Logic
  • In an isothermal expansion, ΔU=0\Delta U = 0 means Q=WQ = W.

  • Because the gas expends energy doing work on the surroundings (W>0W > 0), heat must enter the gas (Q>0Q > 0) to keep its temperature constant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate work with the correct ratio V2/V1V_2/V_1: W=nRTln⁡(V2V1)=(1.00)(8.314)(350)ln⁡(0.03000.0100)≈+3.20×103 JW = nRT \ln\left(\frac{V_2}{V_1}\right) = (1.00)(8.314)(350) \ln\left(\frac{0.0300}{0.0100}\right) \approx +3.20 \times 10^3\text{ J}.

  2. Substitute WW into the First Law: ΔU=Q−W  ⟹  0=Q−3.20×103 J  ⟹  Q=+3.20×103 J\Delta U = Q - W \implies 0 = Q - 3.20 \times 10^3\text{ J} \implies Q = +3.20 \times 10^3\text{ J}.

  3. Interpret the sign of QQ: since Q>0Q > 0, heat entered the system.

Final answer

(a) ΔU=0 J\Delta U = 0\text{ J}; (b) W=3.20×103 JW = 3.20 \times 10^3\text{ J}; (c) Q=+3.20×103 JQ = +3.20 \times 10^3\text{ J} (heat entered the system)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the isothermal work formula explicitly as W=nRTln⁡(VfVi)W = nRT \ln\left(\frac{V_f}{V_i}\right) rather than using generic subscripts 11 and 22.

  • Perform a physical sanity check on every thermodynamic process: if volume expands, work done by the gas must be positive.

  • Practice using energy conservation conceptually: if an expanding gas does work while maintaining constant temperature, thermal energy must flow in from the surroundings to compensate.

Lock it in

Similar question

01

A sample of 0.500 mol0.500\text{ mol} of an ideal gas expands isothermally at 300 K300\text{ K}, doing 850 J850\text{ J} of work on its surroundings. Determine ΔU\Delta U and the heat QQ exchanged with the surroundings.

Answer

ΔU=0 J\Delta U = 0\text{ J} because temperature is constant. From ΔU=Q−W\Delta U = Q - W, 0=Q−850 J0 = Q - 850\text{ J}, so Q=+850 JQ = +850\text{ J} (heat enters the system).

02

An ideal gas is compressed isothermally at 400 K400\text{ K} from V1=0.040 m3V_1 = 0.040\text{ m}^3 to V2=0.010 m3V_2 = 0.010\text{ m}^3 using 2.00 mol2.00\text{ mol} of gas. Calculate the work done by the gas WW and the heat transferred QQ. (R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}))

Answer

W=nRTln⁡(V2/V1)=(2.00)(8.314)(400)ln⁡(0.010/0.040)≈−9.22×103 JW = nRT\ln(V_2/V_1) = (2.00)(8.314)(400)\ln(0.010/0.040) \approx -9.22 \times 10^3\text{ J}. Since ΔU=0\Delta U = 0, Q=W=−9.22×103 JQ = W = -9.22 \times 10^3\text{ J} (heat is released to the surroundings).

03

Compare two processes starting from the same state (P1,V1,T1)(P_1, V_1, T_1) to double the volume 2V12V_1: Path A is reversible isothermal, and Path B is reversible adiabatic. For which path is the final temperature lower, and how does the heat exchanged QQ compare?

Answer

In Path A (isothermal), T2=T1T_2 = T_1 and Q=W>0Q = W > 0 (heat enters). In Path B (adiabatic), Q=0Q = 0, so ΔU=−W<0\Delta U = -W < 0, which causes the temperature to drop (T2<T1T_2 < T_1). Therefore, Path B ends at a lower temperature, while Path A absorbs heat to keep temperature constant.

Loading workspace…