Resources

Students in an introductory physics lab observe a snapshot waveform graph y(x)y(x) representing a snapshot at t=0 st = 0\text{ s} of a sinusoidal wave moving to the right (+x+x direction) at v=4.00 m/sv = 4.00\text{ m/s}. The graph shows a peak at x=0.200 mx = 0.200\text{ m} where y=+0.0300 my = +0.0300\text{ m}, an intercept at x=0.400 mx = 0.400\text{ m} where y=0y = 0, and a trough at x=0.600 mx = 0.600\text{ m} where y=−0.0300 my = -0.0300\text{ m}. A student incorrectly assumes that because the wave propagates to the right, every individual particle on the wave must also be currently moving to the right or upward. For the specific particle located at position x=0.400 mx = 0.400\text{ m} at instant t=0 st = 0\text{ s}: (a) determine the direction and magnitude of its horizontal velocity component vxv_x, and (b) determine the direction and magnitude of its vertical transverse velocity component vyv_y.

Answer and steps

Final answer

(a) vx=0 m/sv_x = 0\text{ m/s} (particles oscillate strictly vertically; no bulk horizontal transport), (b) vy=+0.942 m/sv_y = +0.942\text{ m/s} (directed upward in the +y+y direction)

Steps

Part (a): Horizontal Velocity Component vxv_x

  1. Distinguish wave propagation from particle motion: A transverse mechanical wave transmits energy through a medium, but it does not transport the medium itself. While the wave disturbance moves horizontally to the right with wave speed v=4.00 m/sv = 4.00\text{ m/s}, the individual particles of the medium oscillate strictly perpendicular to the direction of propagation (along the yy-axis).
  2. Evaluate vxv_x: Because there is no motion along the horizontal axis: vx=0 m/sv_x = 0\text{ m/s}

Part (b): Vertical Transverse Velocity Component vyv_y

  1. Determine the wave parameters:

    • Amplitude (AA): A=0.0300 mA = 0.0300\text{ m}
    • Wavelength (λ\lambda): The distance along the xx-axis from a crest to the adjacent trough corresponds to half a wavelength: λ2=0.600 m−0.200 m=0.400 m  ⟹  λ=0.800 m\frac{\lambda}{2} = 0.600\text{ m} - 0.200\text{ m} = 0.400\text{ m} \implies \lambda = 0.800\text{ m}
    • Wavenumber (kk) and Angular Frequency (ω\omega): k=2πλ=2π0.800 m=2.5π rad/mk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.800\text{ m}} = 2.5\pi\text{ rad/m} ω=vk=(4.00 m/s)(2.5π rad/m)=10π rad/s\omega = v k = (4.00\text{ m/s})(2.5\pi\text{ rad/m}) = 10\pi\text{ rad/s}
  2. Find the slope of the wave at x=0.400 mx = 0.400\text{ m}: For a wave travelling in the +x+x direction, the transverse particle velocity vyv_y is related to the spatial slope of the snapshot graph by: vy=∂y∂t=−v∂y∂xv_y = \frac{\partial y}{\partial t} = -v \frac{\partial y}{\partial x} Between the peak at x=0.200 mx = 0.200\text{ m} and the trough at x=0.600 mx = 0.600\text{ m}, the wave displacement decreases as xx increases. At the equilibrium crossing x=0.400 mx = 0.400\text{ m}, the slope has its maximum negative value: ∂y∂x=−kA=−(2.5π rad/m)(0.0300 m)=−0.075π\frac{\partial y}{\partial x} = -k A = -(2.5\pi\text{ rad/m})(0.0300\text{ m}) = -0.075\pi
  3. Calculate the transverse velocity: Substitute the wave speed and slope into the relationship: vy=−(4.00 m/s)(−0.075π)=+0.300π m/s≈+0.942 m/sv_y = -(4.00\text{ m/s})(-0.075\pi) = +0.300\pi\text{ m/s} \approx +0.942\text{ m/s}

    • Physical intuition check: Imagine shifting the entire waveform slightly to the right by Δx\Delta x (representing a moment slightly later, Δt\Delta t). The crest originally located to the left at x=0.200 mx = 0.200\text{ m} moves toward x=0.400 mx = 0.400\text{ m}, meaning the displacement yy at x=0.400 mx = 0.400\text{ m} must increase. Thus, the particle at x=0.400 mx = 0.400\text{ m} is moving upward (+y+y direction).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the propagation velocity of the wave with the physical velocity of the particles in the medium, assigning the wave speed to the particle's horizontal velocity component.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vx=v=4.00 m/s to the right (+x direction)v_x = v = 4.00\text{ m/s to the right } (+x\text{ direction})

    Correct

    vx=0 m/sv_x = 0\text{ m/s}

    In a transverse mechanical wave, wave propagation transfers energy along the xx-axis, but individual particles of the medium oscillate strictly along the perpendicular yy-axis without any net horizontal displacement.

  2. Step 2

    λ=2×(0.600 m−0.200 m)=0.800 m  ⟹  ω=2πvλ=2π(4.00)0.800=10π rad/s\lambda = 2\times (0.600\text{ m} - 0.200\text{ m}) = 0.800\text{ m} \implies \omega = \frac{2\pi v}{\lambda} = \frac{2\pi(4.00)}{0.800} = 10\pi\text{ rad/s}

  3. Step 3

    At \text{At } y = 0,, v_y = ω\omega A = (10π\pi)(0.0300) = 0.942 m/s upward \text{ m/s upward } (+y direction\text{ direction})

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly deduced the full wavelength λ=0.800 m\lambda = 0.800\text{ m} from the crest and trough coordinates.

You accurately calculated the angular frequency ω=10π rad/s\omega = 10\pi\text{ rad/s} using the wave relationship ω=2πvλ\omega = \frac{2\pi v}{\lambda}.

You correctly evaluated both the magnitude and the upward direction of the transverse velocity vyv_y at equilibrium.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Wave Speed with Particle Velocity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the wave propagation speed vv as if it were the physical horizontal velocity vxv_x of a particle in the medium, overlooking that transverse waves involve oscillation perpendicular to the direction of propagation with zero longitudinal motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Transverse vs. Longitudinal Motion
  • In a transverse wave moving along the xx-axis, particles oscillate solely in the yy-direction; hence vx=0v_x = 0.

  • Always set the parallel velocity component of particles to zero for any ideal transverse wave.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the wave is purely transverse and travels in the +x+x direction.

  2. Recognize that medium particles oscillate exclusively along the yy-axis (vx=0 m/sv_x = 0\text{ m/s}).

  3. State the horizontal velocity component as vx=0 m/sv_x = 0\text{ m/s}.

Final answer

(a) vx=0 m/sv_x = 0\text{ m/s}, (b) vy=+0.942 m/sv_y = +0.942\text{ m/s} (directed upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between the propagation speed of a wave disturbance and the oscillation velocity of medium particles.

  • Practice identifying particle velocity directions on snapshot graphs by shifting the wave slightly in the propagation direction.

OverviewACEpath Teacher's Diagnosis

02 The student fails to account for the minus sign in the transverse velocity relation vy = -v(∂y/∂x), incorrectly concluding that the particle moves downward because the graph slopes downward.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Transverse wave implies no horizontal motion of particles   ⟹  vx=0 m/s\implies v_x = 0\text{ m/s}

  2. Step 2

    λ2=0.600 m−0.200 m=0.400 m  ⟹  λ=0.800 m  ⟹  ω=2π(4.00 m/s)0.800 m=10π rad/s\frac{\lambda}{2} = 0.600\text{ m} - 0.200\text{ m} = 0.400\text{ m} \implies \lambda = 0.800\text{ m} \implies \omega = \frac{2\pi(4.00\text{ m/s})}{0.800\text{ m}} = 10\pi\text{ rad/s}

  3. Step 3

    Because the slope \text{Because the slope } ∂y∂x\frac{\partial y}{\partial x}  is negative, \text{ is negative, } v_y = v(∂y∂x)\left(\frac{\partial y}{\partial x}\right) = -ω\omega A   ⟹  \implies v_y = 0.942 m/s downward \text{ m/s downward } (-y direction\text{ direction})

    Correct

    vy=−v(∂y∂x)=−v(−kA)=+ωA=+(10π rad/s)(0.0300 m)≈+0.942 m/s upward (+y direction)v_y = -v\left(\frac{\partial y}{\partial x}\right) = -v(-kA) = +\omega A = +(10\pi\text{ rad/s})(0.0300\text{ m}) \approx +0.942\text{ m/s upward } (+y\text{ direction})

    For a wave traveling in the +x+x direction (y=f(x−vt)y = f(x - vt)), the chain rule gives ∂y∂t=−v∂y∂x\frac{\partial y}{\partial t} = -v\frac{\partial y}{\partial x}. Because the snapshot has a negative slope at x=0.400 mx = 0.400\text{ m}, the transverse velocity is positive (vy>0v_y > 0), meaning the particle is moving upward.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a transverse wave has no horizontal particle velocity component.

You correctly derived the wavelength and angular frequency from the snapshot waveform.

You correctly computed the magnitude ωA≈0.942 m/s\omega A \approx 0.942\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign in wave kinematic velocity-slope relation

You set vy=v∂y∂xv_y = v\frac{\partial y}{\partial x} instead of the wave equation relation vy=−v∂y∂xv_y = -v\frac{\partial y}{\partial x}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spatial slope of a snapshot graph with the temporal direction of motion. For a wave moving to the right, a point on the wave receives whatever disturbance is currently just to its left. Since a peak lies to the left (x=0.200 mx = 0.200\text{ m}), the particle at x=0.400 mx = 0.400\text{ m} must move upward toward that approaching peak.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Chain Rule Check
  • For any traveling wave y(x,t)=f(x∓vt)y(x, t) = f(x \mp vt), the transverse velocity is vy=∂y∂t=∓v∂y∂xv_y = \frac{\partial y}{\partial t} = \mp v \frac{\partial y}{\partial x}.

  • Include the minus sign when the wave travels to the right (+x+x direction).

Shift-the-Wave Physical Intuition
  • A moment Δt\Delta t later, the entire waveform translates forward by Δx=vΔt\Delta x = v\Delta t.

  • Sketch the wave shifted slightly to the right; if the new curve is above the old curve at that position, the particle is moving upward (+y+y).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the transverse velocity relation for a rightward wave: vy=−v∂y∂xv_y = -v\frac{\partial y}{\partial x}.

  2. Evaluate the slope at the equilibrium intercept x=0.400 mx = 0.400\text{ m}: ∂y∂x=−kA=−(2.5π)(0.0300)=−0.075π\frac{\partial y}{\partial x} = -k A = -(2.5\pi)(0.0300) = -0.075\pi.

  3. Multiply to find transverse velocity: vy=−(4.00 m/s)(−0.075π)=+0.300π m/s≈+0.942 m/sv_y = -(4.00\text{ m/s})(-0.075\pi) = +0.300\pi\text{ m/s} \approx +0.942\text{ m/s}.

Final answer

(a) vx=0 m/sv_x = 0\text{ m/s}, (b) vy=+0.942 m/sv_y = +0.942\text{ m/s} directed upward in the +y+y direction

NEXT STEPS
Final Takeaways from Your Teacher
  • Use the 'shift-the-wave' sketch method as a quick sanity check whenever reading snapshot graphs.

  • Remember that for rightward waves, downward spatial slope implies upward particle velocity, and vice versa.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly equates the particle's transverse speed to the wave propagation speed instead of evaluating the particle's harmonic motion velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Particles in a transverse wave do not travel along x  ⟹  vx=0 m/sx \implies v_x = 0\text{ m/s}

  2. Step 2

    As the wave shifts right by a small Δx\Delta x, the crest moves toward x=0.400 mx = 0.400\text{ m}, so yy increases   ⟹  vy is directed upward (+y direction)\implies v_y\text{ is directed upward (+}y\text{ direction)}

  3. Step 3

    vy=v=4.00 m/sv_y = v = 4.00\text{ m/s}

    Correct

    vy=ωA=(10π rad/s)(0.0300 m)≈+0.942 m/sv_y = \omega A = (10\pi\text{ rad/s})(0.0300\text{ m}) \approx +0.942\text{ m/s}

    You set the particle's transverse speed equal to the wave propagation speed vv. The wave speed v=4.00 m/sv = 4.00\text{ m/s} is the speed at which the overall wave shape travels horizontally, whereas the particle executes simple harmonic motion vertically with speed vy=ωAv_y = \omega A at equilibrium.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly distinguished wave propagation from particle transport along the horizontal axis.

You visualized the rightward wave shift correctly to deduce the upward direction of transverse velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating transverse particle speed to wave propagation speed

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the propagation speed of the wave shape (v=λTv = \frac{\lambda}{T}) with the mechanical oscillation speed of an individual particle in the medium (vy=∂y∂t=ωAcos⁡(… )v_y = \frac{\partial y}{\partial t} = \omega A \cos(\dots)).

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Speed vs. Particle Speed
  • Wave speed v=ωkv = \frac{\omega}{k} is constant and describes disturbance propagation, while transverse particle velocity vy=−v∂y∂xv_y = -v\frac{\partial y}{\partial x} varies harmonically with maximum value vy,max⁡=ωAv_{y,\max} = \omega A.

  • Always find λ\lambda from the snapshot, compute ω=vk=v(2πλ)\omega = v k = v\left(\frac{2\pi}{\lambda}\right), and use vy,max⁡=ωAv_{y,\max} = \omega A for particles crossing equilibrium.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine wavelength from crest-to-trough distance: λ2=0.600 m−0.200 m=0.400 m  ⟹  λ=0.800 m\frac{\lambda}{2} = 0.600\text{ m} - 0.200\text{ m} = 0.400\text{ m} \implies \lambda = 0.800\text{ m}.

  2. Calculate angular frequency: ω=vk=v(2πλ)=(4.00 m/s)(2π0.800 m)=10π rad/s\omega = v k = v \left(\frac{2\pi}{\lambda}\right) = (4.00\text{ m/s})\left(\frac{2\pi}{0.800\text{ m}}\right) = 10\pi\text{ rad/s}.

  3. At equilibrium (y=0y = 0), particle speed is maximum: vy=+ωA=+(10π rad/s)(0.0300 m)=+0.300π m/s≈+0.942 m/sv_y = +\omega A = +(10\pi\text{ rad/s})(0.0300\text{ m}) = +0.300\pi\text{ m/s} \approx +0.942\text{ m/s}.

Final answer

(a) vx=0 m/sv_x = 0\text{ m/s}; (b) vy=+0.942 m/sv_y = +0.942\text{ m/s} (upward)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving transverse particle velocity using the partial derivative relation vy=−v∂y∂xv_y = -v\frac{\partial y}{\partial x} for rightward waves.

  • Solve problems comparing maximum transverse acceleration ay,max⁡=ω2Aa_{y,\max} = \omega^2 A and maximum transverse velocity vy,max⁡=ωAv_{y,\max} = \omega A against wave speed vv.

Lock it in

Similar question

01

A snapshot of a transverse wave traveling at v=6.0 m/sv = 6.0\text{ m/s} in the +x+x direction on a string shows a crest at x=1.0 mx = 1.0\text{ m} with amplitude A=0.05 mA = 0.05\text{ m}. For the particle at the crest (x=1.0 mx = 1.0\text{ m}), find its velocity components (vx,vy)(v_x, v_y).

Answer

(vx,vy)=(0 m/s,0 m/s)(v_x, v_y) = (0\text{ m/s}, 0\text{ m/s}). Particles have no horizontal motion in a transverse wave (vx=0v_x = 0), and at a crest (maximum displacement), the transverse velocity momentarily reaches zero (vy=0v_y = 0).

02

A transverse sinusoidal wave with wavelength λ=2.0 m\lambda = 2.0\text{ m} and amplitude A=0.10 mA = 0.10\text{ m} travels to the left (−x-x direction) at v=8.0 m/sv = 8.0\text{ m/s}. Determine the maximum speed of an individual particle in the string and its direction of motion.

Answer

vmax=0.8π m/s≈2.51 m/sv_{\text{max}} = 0.8\pi\text{ m/s} \approx 2.51\text{ m/s}, directed purely along the ±y\pm y axis. The angular frequency is ω=2πvλ=8π rad/s\omega = \frac{2\pi v}{\lambda} = 8\pi\text{ rad/s}. Maximum transverse speed is vy,max=ωA=(8π)(0.10)=0.8π m/sv_{y,\text{max}} = \omega A = (8\pi)(0.10) = 0.8\pi\text{ m/s}, with zero horizontal motion (vx=0v_x = 0).

03

A snapshot at t=0 st = 0\text{ s} shows a transverse wave moving in the +x+x direction at v=3.0 m/sv = 3.0\text{ m/s}. At x=0.50 mx = 0.50\text{ m}, the displacement is y=0 my = 0\text{ m} and the spatial slope is ∂y∂x=+0.20\frac{\partial y}{\partial x} = +0.20. Determine the velocity vector v⃗=(vx,vy)\vec{v} = (v_x, v_y) of the string particle at that point.

Answer

v⃗=(0 m/s,−0.60 m/s)\vec{v} = (0\text{ m/s}, -0.60\text{ m/s}). In a transverse wave, vx=0v_x = 0. Using the kinematic relation for a rightward wave, vy=−v∂y∂x=−(3.0 m/s)(+0.20)=−0.60 m/sv_y = -v \frac{\partial y}{\partial x} = -(3.0\text{ m/s})(+0.20) = -0.60\text{ m/s} (directed downward).

Loading workspace…