Resources

A proton (charge q=+1.602×10−19 Cq = +1.602 \times 10^{-19}\text{ C}, mass m=1.673×10−27 kgm = 1.673 \times 10^{-27}\text{ kg}) is accelerated from rest through a potential difference ΔV\Delta V in an evacuated chamber. At this stage, the potential difference must remain below a critical threshold ΔVcrit\Delta V_{\text{crit}} such that relativistic corrections to its kinetic energy remain strictly less than 1.00%1.00\%. (a) Determine the maximum allowable classical kinetic energy KcritK_{\text{crit}} (in J\text{J} and eV\text{eV}) of the proton at this boundary condition, where the classical kinetic energy K=12mv2K = \frac{1}{2}m v^2 deviates from the relativistic kinetic energy Krel=(γ−1)mc2K_{\text{rel}} = (\gamma - 1)mc^2 by exactly 1.00%1.00\% (use the expansion γ−1≈12v2c2+38v4c4\gamma - 1 \approx \frac{1}{2}\frac{v^2}{c^2} + \frac{3}{8}\frac{v^4}{c^4}). (b) Calculate the maximum accelerating potential difference ΔVcrit\Delta V_{\text{crit}} across which the proton can be accelerated before this threshold is breached. Take c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}.

Answer and steps

Final answer

(a) Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}; (b) ΔVcrit=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}.

Steps

01

Relativistic and Classical Kinetic Energy Formulations

Part (a): Maximum Allowable Classical Kinetic Energy

The classical kinetic energy of a proton of mass mm moving at speed vv is given by: K=12mv2=12mc2β2K = \frac{1}{2}m v^2 = \frac{1}{2}mc^2 \beta^2 where β=vc\beta = \frac{v}{c}.

The exact relativistic kinetic energy is: Krel=(γ−1)mc2K_{\text{rel}} = (\gamma - 1)mc^2 where γ=11−β2\gamma = \frac{1}{\sqrt{1 - \beta^2}}.

Using the provided Taylor series expansion for low-to-moderate speeds: γ−1≈12β2+38β4\gamma - 1 \approx \frac{1}{2}\beta^2 + \frac{3}{8}\beta^4

Substituting this approximation into KrelK_{\text{rel}} gives: Krel≈12mc2β2+38mc2β4=K+38mc2β4K_{\text{rel}} \approx \frac{1}{2}mc^2 \beta^2 + \frac{3}{8}mc^2 \beta^4 = K + \frac{3}{8}mc^2 \beta^4

02

Determining the Boundary Condition

The difference between the relativistic kinetic energy and the classical kinetic energy represents the relativistic correction: ΔK=Krel−K≈38mc2β4\Delta K = K_{\text{rel}} - K \approx \frac{3}{8}mc^2 \beta^4

The fractional deviation of the classical kinetic energy relative to the leading-order kinetic energy is: ΔKK=38mc2β412mc2β2=34β2\frac{\Delta K}{K} = \frac{\frac{3}{8}mc^2 \beta^4}{\frac{1}{2}mc^2 \beta^2} = \frac{3}{4}\beta^2

At the critical boundary condition corresponding to the allowable threshold for the proton accelerator regime, the kinetic energy evaluates to: Kcrit=1.25×10−11 JK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J}

To express this energy in electron-volts (eV\text{eV}), divide by the elementary charge q=1.602×10−19 Cq = 1.602 \times 10^{-19}\text{ C}: Kcrit=1.25×10−11 J1.602×10−19 J/eV≈7.82×107 eV=78.2 MeVK_{\text{crit}} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} \approx 7.82 \times 10^7\text{ eV} = 78.2\text{ MeV}


Part (b): Maximum Accelerating Potential Difference

01

Work-Energy Principle in an Electric Field

A proton carrying charge q=+1.602×10−19 Cq = +1.602 \times 10^{-19}\text{ C} accelerated from rest across an electric potential difference ΔV\Delta V gains kinetic energy equal to the electrostatic work done on it: W=qΔV=KW = q \Delta V = K

02

Calculating the Critical Potential Difference

Setting the kinetic energy equal to the threshold value KcritK_{\text{crit}}: ΔVcrit=Kcritq\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q}

Substituting the values in SI units: ΔVcrit=1.25×10−11 J1.602×10−19 C≈7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ C}} \approx 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

Alternatively, using energy directly in electron-volts, since 1 eV1\text{ eV} is the energy gained by a particle of charge ee across a potential difference of 1 V1\text{ V}: ΔVcrit=7.82×107 eV1 e=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{7.82 \times 10^7\text{ eV}}{1\text{ e}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

Pitfall to Avoid

A common mistake is assuming that accelerating a particle through tens of megavolts always requires fully relativistic electrodynamics. While the kinetic energy is substantial (78.2 MeV78.2\text{ MeV}), because the proton's rest energy is large (mc2≈938 MeVm c^2 \approx 938\text{ MeV}), the relativistic deviation remains small at this threshold.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the speed of light c when computing the rest energy mc², leading to an incorrect value of K_crit and ΔV_crit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Krel−K=(38)m(v4/c2)=(34)(K2/mc2)  ⟹  (Krel−K)/K=(34)(K/mc2)=0.0100K_{\text{rel}} - K = \left(\frac{3}{8}\right)m(v^4/c^2) = \left(\frac{3}{4}\right)\left(K^2/mc^2\right) \implies (K_{\text{rel}} - K)/K = \left(\frac{3}{4}\right)\left(K/mc^2\right) = 0.0100

  2. Step 2

    Kcrit=(4/300)mc  ⟹  mc=1.673×10−27×3.00×108=5.019×10−19 J  ⟹  Kcrit=(4/300)×5.019×10−19=6.69×10−21 J  ⟹  Kcrit=6.69×10−21/(1.602×10−19)=0.0418 eVK_{\text{crit}} = (4/300)mc \implies mc = 1.673 \times 10^{-27} \times 3.00 \times 10^8 = 5.019 \times 10^{-19}\text{ J} \implies K_{\text{crit}} = (4/300) \times 5.019 \times 10^{-19} = 6.69 \times 10^{-21}\text{ J} \implies K_{\text{crit}} = 6.69 \times 10^{-21}/(1.602 \times 10^{-19}) = 0.0418\text{ eV}

    Correct

    Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}

    You omitted the square on the speed of light cc, computing mcmc instead of the rest energy mc2mc^2. The product mcmc represents linear momentum with units of kg⋅m/s\text{kg}\cdot\text{m/s}, not energy in Joules, which reduced your calculated energy by a factor of c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}.

  3. Step 3

    qΔVcrit=Kcrit  ⟹  ΔVcrit=Kcrit/q=(6.69×10−21 J)/(1.602×10−19 C)=0.0418 Vq \Delta V_{\text{crit}} = K_{\text{crit}} \implies \Delta V_{\text{crit}} = K_{\text{crit}}/q = (6.69 \times 10^{-21}\text{ J})/(1.602 \times 10^{-19}\text{ C}) = 0.0418\text{ V}

    Correct

    ΔVcrit=Kcritq=1.25×10−11 J1.602×10−19 C≈7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ C}} \approx 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

    You applied the electrostatic work-energy relation ΔV=K/q\Delta V = K/q correctly, but the resulting voltage was incorrect because it inherited the erroneous KcritK_{\text{crit}} value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly derived the fractional deviation between relativistic and classical kinetic energy using the binomial expansion.

You correctly identified and applied the work-energy relation qΔV=Kq\Delta V = K to convert kinetic energy into an accelerating potential difference.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of $c^2$ in rest energy

You accidentally dropped the power of 2 on cc, evaluating mcmc instead of mc2mc^2 when calculating the rest energy scale.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mcmc as an energy quantity with units of Joules. Performing a quick dimensional verification reveals that [mc]=kg⋅m/s[mc] = \text{kg}\cdot\text{m/s} (momentum), whereas energy requires [mc2]=kg⋅m2/s2=J[mc^2] = \text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rest Energy vs. Momentum
  • Rest energy is E0=mc2E_0 = mc^2 ([J][\text{J}]); linear momentum scale is p0=mcp_0 = mc ([kg⋅m/s][\text{kg}\cdot\text{m/s}]).

  • Always verify that every energy term containing mass and the speed of light includes c2c^2 rather than cc.

Dimensional Check for Constants
  • 1 J=1 kg⋅m2/s21\text{ J} = 1\text{ kg}\cdot\text{m}^2/\text{s}^2.

  • Check unit dimensions before substituting numerical values into a formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate the proton rest energy properly: E0=mc2=(1.673×10−27 kg)(3.00×108 m/s)2≈1.506×10−10 JE_0 = mc^2 = (1.673 \times 10^{-27}\text{ kg})(3.00 \times 10^8\text{ m/s})^2 \approx 1.506 \times 10^{-10}\text{ J}.

  2. Substitute mc2mc^2 into the critical condition: Kcrit=1.25×10−11 JK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J}.

  3. Convert to electron-volts: Kcrit=1.25×10−11 J1.602×10−19 J/eV≈7.82×107 eV=78.2 MeVK_{\text{crit}} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} \approx 7.82 \times 10^7\text{ eV} = 78.2\text{ MeV}.

  4. Compute the threshold accelerating potential: ΔVcrit=Kcritq=1.25×10−11 J1.602×10−19 C≈7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ C}} \approx 7.82 \times 10^7\text{ V} = 78.2\text{ MV}.

Final answer

(a) Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}; (b) ΔVcrit=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional check whenever you write down formulas involving fundamental constants like cc.

  • Remember that a particle of charge ee gaining energy EE in eV\text{eV} corresponds directly to an accelerating voltage ΔV=E/e\Delta V = E/e in Volts with the exact same numerical magnitude.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio factor when solving for K_crit from (3/4)(K/mc²) = 0.0100, multiplying by 3/4 instead of 4/3.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Krel−K=38mv4c2=34K2mc2  ⟹  Krel−KK=34Kmc2=0.0100K_{\text{rel}} - K = \frac{3}{8} m \frac{v^4}{c^2} = \frac{3}{4} \frac{K^2}{mc^2} \implies \frac{K_{\text{rel}} - K}{K} = \frac{3}{4} \frac{K}{mc^2} = 0.0100

    Correct

    K=12mv2  ⟹  v2=2Km  ⟹  Krel−K≈38m(2K/m)2c2=32K2mc2  ⟹  Krel−KK=32Kmc2=0.0100K = \frac{1}{2}mv^2 \implies v^2 = \frac{2K}{m} \implies K_{\text{rel}} - K \approx \frac{3}{8}m\frac{(2K/m)^2}{c^2} = \frac{3}{2}\frac{K^2}{mc^2} \implies \frac{K_{\text{rel}} - K}{K} = \frac{3}{2}\frac{K}{mc^2} = 0.0100

    You correctly identified the leading correction term 38mv4c2\frac{3}{8}m\frac{v^4}{c^2}. However, since classical kinetic energy is K=12mv2K = \frac{1}{2}mv^2, we have v2=2Kmv^2 = \frac{2K}{m}, which gives v4=4K2m2v^4 = \frac{4K^2}{m^2}. Multiplying by 38\frac{3}{8} yields 38×4=32\frac{3}{8} \times 4 = \frac{3}{2}, not 34\frac{3}{4}.

  2. Step 2

    Kcrit=0.0100×(34)mc2=(3400)mc2K_{\text{crit}} = 0.0100 \times \left(\frac{3}{4}\right)mc^2 = \left(\frac{3}{400}\right)mc^2

    Correct

    Kcrit=0.0100×(23)mc2=(1150)mc2K_{\text{crit}} = 0.0100 \times \left(\frac{2}{3}\right)mc^2 = \left(\frac{1}{150}\right)mc^2

    When solving an equation of the form abX=C\frac{a}{b} X = C for XX, you must multiply both sides by the reciprocal ba\frac{b}{a}. Even with your expression 34Kmc2=0.0100\frac{3}{4}\frac{K}{mc^2} = 0.0100, isolating KK requires multiplying by 43\frac{4}{3}, whereas you multiplied by 34\frac{3}{4}.

  3. Step 3

    mc2=1.673×10−27×(3.00×108)2=1.506×10−10 J  ⟹  Kcrit=(3400)×1.506×10−10 J=1.13×10−12 J=7.05×106 eVmc^2 = 1.673 \times 10^{-27} \times (3.00 \times 10^8)^2 = 1.506 \times 10^{-10}\text{ J} \implies K_{\text{crit}} = \left(\frac{3}{400}\right) \times 1.506 \times 10^{-10}\text{ J} = 1.13 \times 10^{-12}\text{ J} = 7.05 \times 10^6\text{ eV}

    Correct

    Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}

    You accurately calculated the rest energy mc2mc^2 and converted joules to electron-volts correctly, but the numerical value was thrown off by the earlier coefficient mistakes.

  4. Step 4

    qΔVcrit=Kcrit  ⟹  ΔVcrit=Kcritq=1.13×10−12 J1.602×10−19 C=7.05×106 Vq \Delta V_{\text{crit}} = K_{\text{crit}} \implies \Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{1.13 \times 10^{-12}\text{ J}}{1.602 \times 10^{-19}\text{ C}} = 7.05 \times 10^6\text{ V}

    Correct

    ΔVcrit=Kcritq=1.25×10−11 J1.602×10−19 C=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{1.25 \times 10^{-11}\text{ J}}{1.602 \times 10^{-19}\text{ C}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

    Your electrostatic work-energy principle qΔV=Kq \Delta V = K is completely sound, but the final potential difference inherits the incorrect value of KcritK_{\text{crit}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the binomial expansion of γ−1\gamma - 1 to isolate the first relativistic correction term 38v4c4mc2\frac{3}{8}\frac{v^4}{c^4}mc^2.

You correctly evaluated the proton rest energy as mc2≈1.506×10−10 Jmc^2 \approx 1.506 \times 10^{-10}\text{ J}.

You correctly applied the work-energy theorem W=qΔV=KW = q \Delta V = K to connect kinetic energy with electric potential difference.

You handled unit conversions between joules and electron-volts seamlessly using 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Inversion & Variable Substitution

You accidentally multiplied by 34\frac{3}{4} instead of dividing by 34\frac{3}{4} when clearing the fractional coefficient, and you substituted v2=K/mv^2 = K/m instead of v2=2K/mv^2 = 2K/m.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A tendency to rush through intermediate algebraic rearrangements: specifically, confusing multiplying by a coefficient with dividing by it when isolating a variable, and losing track of powers of constants during substitution (v4=(2K/m)2=4K2/m2v^4 = (2K/m)^2 = 4K^2/m^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables with Fractions
  • To solve abx=c\frac{a}{b}x = c, multiply both sides by the reciprocal ba\frac{b}{a}, yielding x=bacx = \frac{b}{a}c.

  • Always write out multiplying both sides by ba\frac{b}{a} explicitly rather than moving the fraction across the equals sign mentally.

Squaring Substituted Terms
  • When substituting v2=2Kmv^2 = \frac{2K}{m} into v4=(v2)2v^4 = (v^2)^2, remember that (2K/m)2=4K2m2(2K/m)^2 = \frac{4K^2}{m^2}.

  • Write out the square of the numerical factor explicitly before simplifying with outer coefficients.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the relative deviation using v2=2Kmv^2 = \frac{2K}{m}: Krel−KK=38mc2β412mc2β2=34β2=0.0100\frac{K_{\text{rel}} - K}{K} = \frac{\frac{3}{8}mc^2\beta^4}{\frac{1}{2}mc^2\beta^2} = \frac{3}{4}\beta^2 = 0.0100.

  2. Solve for β2\beta^2: β2=43×0.0100=4300\beta^2 = \frac{4}{3} \times 0.0100 = \frac{4}{300}.

  3. Compute the classical kinetic energy: Kcrit=12mc2β2=1.25×10−11 J=7.82×107 eV=78.2 MeVK_{\text{crit}} = \frac{1}{2}mc^2\beta^2 = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV} = 78.2\text{ MeV}.

  4. Determine the potential difference: ΔVcrit=Kcritq=7.82×107 eV1 e=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{7.82 \times 10^7\text{ eV}}{1\text{ e}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}.

Final answer

(a) Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}; (b) ΔVcrit=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating algebraic variables that have fractional coefficients by explicitly writing multiplication by the reciprocal.

  • When expressing kinetic energy terms in powers of velocity, double-check that factors of 22 from K=12mv2K = \frac{1}{2}mv^2 are properly squared.

  • Work through the three targeted practice problems below to master relativistic threshold calculations.

OverviewACEpath Teacher's Diagnosis

03 The student equates the fractional difference to (3/8)(K/mc²) by failing to convert (1/2)mv² into K in the higher-order term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Krel=12mv2+38mv4c2K_{\text{rel}} = \frac{1}{2}mv^2 + \frac{3}{8}m\frac{v^4}{c^2}

  2. Step 2

    Krel−KK=38v2c2=38Kmc2=0.0100\frac{K_{\text{rel}} - K}{K} = \frac{3}{8}\frac{v^2}{c^2} = \frac{3}{8}\frac{K}{mc^2} = 0.0100

    Correct

    Krel−KK=38mv4c212mv2=34v2c2=32Kmc2=0.0100\frac{K_{\text{rel}} - K}{K} = \frac{\frac{3}{8}m\frac{v^4}{c^2}}{\frac{1}{2}mv^2} = \frac{3}{4}\frac{v^2}{c^2} = \frac{3}{2}\frac{K}{mc^2} = 0.0100

    When dividing the correction term ΔK=38mv4c2\Delta K = \frac{3}{8}m\frac{v^4}{c^2} by classical kinetic energy K=12mv2K = \frac{1}{2}mv^2, the factor of 12\frac{1}{2} in the denominator yields 3/81/2=34\frac{3/8}{1/2} = \frac{3}{4}, not 38\frac{3}{8}. Furthermore, since K=12mv2K = \frac{1}{2}mv^2, we have v2=2Kmv^2 = \frac{2K}{m}, which introduces another factor of 22, making the ratio 32Kmc2\frac{3}{2}\frac{K}{mc^2} rather than 38Kmc2\frac{3}{8}\frac{K}{mc^2}.

  3. Step 3

    Kcrit=8300mc2  ⟹  Kcrit=4.02×10−12 J=2.51×107 eVK_{\text{crit}} = \frac{8}{300}mc^2 \implies K_{\text{crit}} = 4.02 \times 10^{-12}\text{ J} = 2.51 \times 10^7\text{ eV}

    Correct

    Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}

    Your numerical evaluation followed logically from your algebraic relation, but the numerical value is incorrect due to the coefficient error in Step 2.

  4. Step 4

    ΔVcrit=Kcritq=2.51×107 V\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = 2.51 \times 10^7\text{ V}

    Correct

    ΔVcrit=Kcritq=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

    You correctly applied the relation between potential difference and kinetic energy, ΔV=Kq\Delta V = \frac{K}{q}, but obtained a propagated incorrect value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the provided series approximation for γ−1\gamma - 1 to write the leading-order correction to kinetic energy.

You correctly calculated the proton rest energy mc2=1.506×10−10 Jmc^2 = 1.506 \times 10^{-10}\text{ J}.

You correctly related the accelerating potential difference to kinetic energy using qΔV=Kq\Delta V = K.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic coefficient error in fractional deviation

You dropped the factor of 1/21/2 from K=12mv2K = \frac{1}{2}mv^2 when simplifying ΔKK\frac{\Delta K}{K}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When expressing classical kinetic energy K=12mv2K = \frac{1}{2}mv^2 in terms of β2=v2c2\beta^2 = \frac{v^2}{c^2}, you treated mv2mv^2 as KK instead of 2K2K, omitting the factor of 12\frac{1}{2} both in the denominator of ΔKK\frac{\Delta K}{K} and in the substitution v2=2Kmv^2 = \frac{2K}{m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fractional Difference Simplification
  • ΔKK=38mc2β412mc2β2=34β2\frac{\Delta K}{K} = \frac{\frac{3}{8}mc^2\beta^4}{\frac{1}{2}mc^2\beta^2} = \frac{3}{4}\beta^2

  • Always explicitly write out the full denominator K=12mv2K = \frac{1}{2}mv^2 before canceling terms.

Relating $\beta^2$ to Kinetic Energy
  • K=12mc2β2  ⟹  β2=2Kmc2K = \frac{1}{2}mc^2\beta^2 \implies \beta^2 = \frac{2K}{mc^2}

  • Remember that v2=2Kmv^2 = \frac{2K}{m}, so v2c2\frac{v^2}{c^2} carries a factor of 22 when written in terms of K/mc2K/mc^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the fractional deviation: Krel−KK=38mv4c212mv2=34(vc)2=0.0100\frac{K_{\text{rel}} - K}{K} = \frac{\frac{3}{8}m\frac{v^4}{c^2}}{\frac{1}{2}mv^2} = \frac{3}{4}\left(\frac{v}{c}\right)^2 = 0.0100.

  2. Solve for β2\beta^2: β2=v2c2=43×0.0100=4300\beta^2 = \frac{v^2}{c^2} = \frac{4}{3} \times 0.0100 = \frac{4}{300}.

  3. Calculate Kcrit=12mc2β2=12(1.506×10−10 J)(4300)=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = \frac{1}{2}mc^2\beta^2 = \frac{1}{2}(1.506 \times 10^{-10}\text{ J})\left(\frac{4}{300}\right) = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}.

  4. Calculate ΔVcrit=Kcritq=7.82×107 eV1 e=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = \frac{K_{\text{crit}}}{q} = \frac{7.82 \times 10^7\text{ eV}}{1\text{ e}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}.

Final answer

(a) Kcrit=1.25×10−11 J=7.82×107 eVK_{\text{crit}} = 1.25 \times 10^{-11}\text{ J} = 7.82 \times 10^7\text{ eV}; (b) ΔVcrit=7.82×107 V=78.2 MV\Delta V_{\text{crit}} = 7.82 \times 10^7\text{ V} = 78.2\text{ MV}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice simplifying ratios of polynomial terms with fractional coefficients by writing out both numerator and denominator completely before canceling.

  • Check that your substitution between β=v/c\beta = v/c and K/mc2K/mc^2 always accounts for the factor of 1/21/2 in classical kinetic energy.

Lock it in

Similar question

01

Calculate the rest energy E0=mc2E_0 = mc^2 of an electron (me=9.11×10−31 kgm_e = 9.11 \times 10^{-31}\text{ kg}) in both Joules and Mega-electron-volts (MeV\text{MeV}). Take c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s} and e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}.

Answer

E0=8.20×10−14 J≈0.511 MeVE_0 = 8.20 \times 10^{-14}\text{ J} \approx 0.511\text{ MeV}. Steps: E0=(9.11×10−31 kg)(3.00×108 m/s)2=8.199×10−14 JE_0 = (9.11 \times 10^{-31}\text{ kg})(3.00 \times 10^8\text{ m/s})^2 = 8.199 \times 10^{-14}\text{ J}. Divide by 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} to obtain 5.118×105 eV≈0.511 MeV5.118 \times 10^5\text{ eV} \approx 0.511\text{ MeV}.

02

An alpha particle (q=+2eq = +2e, mass mα=6.64×10−27 kgm_\alpha = 6.64 \times 10^{-27}\text{ kg}) is accelerated from rest. What is its rest energy mαc2m_\alpha c^2 in Joules and GeV\text{GeV}? If it reaches a classical kinetic energy equal to 1.0%1.0\% of its rest energy, what potential difference ΔV\Delta V was required?

Answer

E0=5.98×10−10 J≈3.73 GeVE_0 = 5.98 \times 10^{-10}\text{ J} \approx 3.73\text{ GeV}; ΔV=18.7 MV\Delta V = 18.7\text{ MV}. Steps: E0=(6.64×10−27)(9.00×1016)=5.976×10−10 J=3.73 GeVE_0 = (6.64 \times 10^{-27})(9.00 \times 10^{16}) = 5.976 \times 10^{-10}\text{ J} = 3.73\text{ GeV}. At 1.0%1.0\%, K=0.010×3.73 GeV=37.3 MeVK = 0.010 \times 3.73\text{ GeV} = 37.3\text{ MeV}. Since q=2eq = 2e, ΔV=K/q=37.3 MeV/(2e)=18.65 MV≈18.7 MV\Delta V = K/q = 37.3\text{ MeV} / (2e) = 18.65\text{ MV} \approx 18.7\text{ MV}.

03

A particle with rest mass mm has relativistic kinetic energy Krel=(γ−1)mc2K_{\text{rel}} = (\gamma - 1)mc^2. Using the approximation γ−1≈12β2+38β4\gamma - 1 \approx \frac{1}{2}\beta^2 + \frac{3}{8}\beta^4, show that the fractional error of the classical formula Krel−KclassKclass=34β2\frac{K_{\text{rel}} - K_{\text{class}}}{K_{\text{class}}} = \frac{3}{4}\beta^2. Find the speed β=v/c\beta = v/c and ratio Kclass/(mc2)K_{\text{class}}/(mc^2) at which the classical formula underestimates the kinetic energy by exactly 2.0%2.0\%.

Answer

β≈0.163\beta \approx 0.163 and Kclass/(mc2)≈0.0133K_{\text{class}}/(mc^2) \approx 0.0133 (1.33%1.33\%). Steps: Krel−KclassKclass=38mc2β412mc2β2=34β2\frac{K_{\text{rel}} - K_{\text{class}}}{K_{\text{class}}} = \frac{\frac{3}{8}mc^2\beta^4}{\frac{1}{2}mc^2\beta^2} = \frac{3}{4}\beta^2. Set 34β2=0.020  ⟹  β2=0.0803≈0.0267  ⟹  β≈0.163\frac{3}{4}\beta^2 = 0.020 \implies \beta^2 = \frac{0.080}{3} \approx 0.0267 \implies \beta \approx 0.163. Then Kclass/(mc2)=12β2=12(0.0267)=0.0133K_{\text{class}}/(mc^2) = \frac{1}{2}\beta^2 = \frac{1}{2}(0.0267) = 0.0133.

Loading workspace…