Resources

A crate of mass m=25.0 kgm = 25.0\text{ kg} is released from rest at the top of a frictionless ramp inclined at an angle of θ=30.0∘\theta = 30.0^\circ above the horizontal. To analyze the motion, a Cartesian coordinate system is chosen such that the +x+x-axis points down along the surface of the ramp and the +y+y-axis points perpendicular to the ramp surface upward. Using this coordinate system and taking the magnitude of gravitational acceleration as g=9.80 m/s2g = 9.80\text{ m/s}^2, determine: (a) the components of the gravitational force vector F⃗g=(Fgx,Fgy)\vec{F}_g = (F_{gx}, F_{gy}), (b) the normal force FNF_N exerted by the ramp on the crate, and (c) the acceleration axa_x of the crate along the incline.

Answer and steps

Final answer

(a) F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N}), (b) FN=212 NF_N = 212\text{ N}, (c) ax=4.90 m/s2a_x = 4.90\text{ m/s}^2

Steps

01

Resolve the Gravitational Force into Coordinate Components

The crate has mass m=25.0 kgm = 25.0\text{ kg}, and the magnitude of the gravitational force is:

Fg=mg=(25.0 kg)(9.80 m/s2)=245 NF_g = mg = (25.0\text{ kg})(9.80\text{ m/s}^2) = 245\text{ N}

The coordinate system aligns with the incline:

  • The +x+x-axis is directed down along the incline.
  • The +y+y-axis is directed perpendicular to the incline, pointing upward.

By geometry, the angle between the true downward vertical (the direction of gravity) and the negative yy-axis (perpendicular into the ramp) equals the ramp angle θ=30.0∘\theta = 30.0^\circ.

Decomposing the weight into the chosen axes:

  • The component acting parallel to the surface down the ramp is in the +x+x-direction: Fgx=mgsin⁡θ=(245 N)sin⁡(30.0∘)=122.5 N≈123 NF_{gx} = mg \sin\theta = (245\text{ N})\sin(30.0^\circ) = 122.5\text{ N} \approx 123\text{ N}
  • The component acting perpendicular to the surface into the ramp points in the −y-y-direction: Fgy=−mgcos⁡θ=−(245 N)cos⁡(30.0∘)≈−212.18 N≈−212 NF_{gy} = -mg \cos\theta = -(245\text{ N})\cos(30.0^\circ) \approx -212.18\text{ N} \approx -212\text{ N}

Therefore, the gravitational force vector in this coordinate frame is:

F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N})

(Pitfall to avoid: Do not confuse the sine and cosine components. Because the angle θ\theta is measured with respect to the horizontal, the component perpendicular to the incline uses cos⁡θ\cos\theta, and the parallel component uses sin⁡θ\sin\theta.)


02

Determine the Normal Force FNF_N

Because the crate does not lift off or break into the ramp, there is no motion or acceleration perpendicular to the ramp surface (ay=0a_y = 0).

Applying Newton's second law along the yy-axis:

∑Fy=may\sum F_y = m a_y

FN+Fgy=0F_N + F_{gy} = 0

FN−mgcos⁡θ=0F_N - mg \cos\theta = 0

FN=mgcos⁡θ=(245 N)cos⁡(30.0∘)≈212 NF_N = mg \cos\theta = (245\text{ N})\cos(30.0^\circ) \approx 212\text{ N}


03

Calculate the Acceleration Along the Incline axa_x

The surface is frictionless, so the only force acting along the xx-axis is the parallel component of gravity FgxF_{gx}.

Applying Newton's second law along the xx-axis:

∑Fx=max\sum F_x = m a_x

mgsin⁡θ=maxmg \sin\theta = m a_x

Dividing both sides by the mass mm:

ax=gsin⁡θ=(9.80 m/s2)sin⁡(30.0∘)=4.90 m/s2a_x = g \sin\theta = (9.80\text{ m/s}^2)\sin(30.0^\circ) = 4.90\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student swaps the sine and cosine trigonometric functions when resolving the gravitational force vector into incline-aligned components.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fgx=m⋅g⋅cos⁡(30.0∘)=212.2 NF_{gx} = m \cdot g \cdot \cos(30.0^\circ) = 212.2\text{ N} ⟹\Longrightarrow Fgy=−m⋅g⋅sin⁡(30.0∘)=−122.5 NF_{gy} = -m \cdot g \cdot \sin(30.0^\circ) = -122.5\text{ N} ⟹\Longrightarrow F⃗g=(212.2 N,−122.5 N)\vec{F}_g = (212.2\text{ N}, -122.5\text{ N})

    Correct

    Fgx=mgsin⁡(30.0∘)=122.5 N≈123 NF_{gx} = mg\sin(30.0^\circ) = 122.5\text{ N} \approx 123\text{ N}, Fgy=−mgcos⁡(30.0∘)=−212.2 N≈−212 NF_{gy} = -mg\cos(30.0^\circ) = -212.2\text{ N} \approx -212\text{ N}, so F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N})

    Because the incline angle θ=30.0∘\theta = 30.0^\circ is measured from the horizontal, the angle between the downward vertical gravity vector and the perpendicular (−y-y) axis is θ\theta. Therefore, the perpendicular component uses the cosine function (Fgy=−mgcos⁡θF_{gy} = -mg\cos\theta), while the parallel downhill component uses the sine function (Fgx=mgsin⁡θF_{gx} = mg\sin\theta).

  2. Step 2

    ∑Fy=FN+Fgy=0⟹FN=−Fgy=122.5 N\sum F_y = F_N + F_{gy} = 0 \Longrightarrow F_N = -F_{gy} = 122.5\text{ N}

    Correct

    ∑Fy=FN+Fgy=0⟹FN=−Fgy=mgcos⁡(30.0∘)≈212 N\sum F_y = F_N + F_{gy} = 0 \Longrightarrow F_N = -F_{gy} = mg\cos(30.0^\circ) \approx 212\text{ N}

    Your equilibrium equation along the yy-axis is completely correct, but your final value was affected by the swapped value of FgyF_{gy} from Step 1.

  3. Step 3

    ax=Fgxm=212.2 N25.0 kg=8.49 m/s2a_x = \frac{F_{gx}}{m} = \frac{212.2\text{ N}}{25.0\text{ kg}} = 8.49\text{ m/s}^2

    Correct

    ax=Fgxm=gsin⁡(30.0∘)=(9.80 m/s2)sin⁡(30.0∘)=4.90 m/s2a_x = \frac{F_{gx}}{m} = g\sin(30.0^\circ) = (9.80\text{ m/s}^2)\sin(30.0^\circ) = 4.90\text{ m/s}^2

    You correctly isolated axa_x using Newton's second law along the incline, but your numerical answer inherited the incorrect FgxF_{gx} value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the sign convention with +x+x directed down the ramp and +y+y perpendicular to the ramp.

You correctly applied Newton's second law in the yy-direction to balance the normal force with the perpendicular component of gravity.

You correctly applied Newton's second law in the xx-direction to relate the parallel force component to acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Swapped sine and cosine when decomposing weight on an inclined plane

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal or xx-axis with cosine and the vertical or yy-axis with sine by default, rather than tracing the geometric angle between the vertical gravity vector and the tilted coordinate axes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the reference angle
  • On an incline of angle θ\theta above the horizontal, the angle between true vertical (gravity) and the perpendicular into the ramp is θ\theta.

  • Draw the right triangle formed by the gravity vector and the tilted axes, noting that the adjacent side lies along the perpendicular axis (mgcos⁡θmg\cos\theta) and the opposite side lies along the incline (mgsin⁡θmg\sin\theta).

Extreme angle test
  • As θ→0∘\theta \to 0^\circ (flat ground), the downhill force must vanish (mgsin⁡0∘=0mg\sin 0^\circ = 0) and the normal force must equal full weight (mgcos⁡0∘=mgmg\cos 0^\circ = mg).

  • Quickly check whether setting θ=0∘\theta = 0^\circ makes your downhill component zero and your perpendicular component mgmg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct parallel component: Fgx=mgsin⁡(30.0∘)=(25.0 kg)(9.80 m/s2)(0.500)=122.5 N≈123 NF_{gx} = mg\sin(30.0^\circ) = (25.0\text{ kg})(9.80\text{ m/s}^2)(0.500) = 122.5\text{ N} \approx 123\text{ N}.

  2. Calculate the correct perpendicular component: Fgy=−mgcos⁡(30.0∘)=−(25.0 kg)(9.80 m/s2)(0.866)≈−212.2 N≈−212 NF_{gy} = -mg\cos(30.0^\circ) = -(25.0\text{ kg})(9.80\text{ m/s}^2)(0.866) \approx -212.2\text{ N} \approx -212\text{ N}.

  3. Substitute the corrected FgyF_{gy} into equilibrium along yy: FN=−Fgy=212.2 N≈212 NF_N = -F_{gy} = 212.2\text{ N} \approx 212\text{ N}.

  4. Substitute the corrected FgxF_{gx} into Newton's second law along xx: ax=Fgxm=122.5 N25.0 kg=4.90 m/s2a_x = \frac{F_{gx}}{m} = \frac{122.5\text{ N}}{25.0\text{ kg}} = 4.90\text{ m/s}^2.

Final answer

(a) F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N}), (b) FN=212 NF_N = 212\text{ N}, (c) ax=4.90 m/s2a_x = 4.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a dedicated free-body diagram showing the right triangle for the weight components relative to the incline.

  • Use the θ→0∘\theta \to 0^\circ boundary check to verify you did not swap sine and cosine before proceeding to force balance equations.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the y-component of gravity acts in the negative y-direction and records a positive value for F_gy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fgx=m⋅g⋅sin⁡(30.0∘)  ⟹  Fgx=25.0⋅9.80⋅0.500=122.5 NF_{gx} = m \cdot g \cdot \sin(30.0^\circ) \implies F_{gx} = 25.0 \cdot 9.80 \cdot 0.500 = 122.5\text{ N}

  2. Step 2

    Fgy=m⋅g⋅cos⁡(30.0∘)  ⟹  Fgy=25.0⋅9.80⋅0.866=212.2 N  ⟹  F⃗g=(122.5 N,212.2 N)F_{gy} = m \cdot g \cdot \cos(30.0^\circ) \implies F_{gy} = 25.0 \cdot 9.80 \cdot 0.866 = 212.2\text{ N} \implies \vec{F}_g = (122.5\text{ N}, 212.2\text{ N})

    Correct

    Fgy=−mgcos⁡θ=−(25.0 kg)(9.80 m/s2)cos⁡(30.0∘)≈−212 N  ⟹  F⃗g=(123 N,−212 N)F_{gy} = -mg \cos\theta = -(25.0\text{ kg})(9.80\text{ m/s}^2)\cos(30.0^\circ) \approx -212\text{ N} \implies \vec{F}_g = (123\text{ N}, -212\text{ N})

    Because the +y+y-axis points upward perpendicular to the ramp surface and gravity pulls downward into the ramp, the yy-component must be negative: Fgy=−212 NF_{gy} = -212\text{ N}.

  3. Step 3

    ∑Fy=FN−Fgy=0  ⟹  FN=Fgy=212.2 N\sum F_y = F_N - F_{gy} = 0 \implies F_N = F_{gy} = 212.2\text{ N}

  4. Step 4

    ax=Fgxm  ⟹  ax=122.525.0=4.90 m/s2a_x = \frac{F_{gx}}{m} \implies a_x = \frac{122.5}{25.0} = 4.90\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct trigonometric ratios for decomposing gravity on an inclined plane.

You correctly calculated the magnitude of the normal force using perpendicular equilibrium.

You correctly found the acceleration down the incline using Newton's second law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing negative sign on vector component

You calculated the magnitude mgcos⁡θmg\cos\theta correctly but recorded it as a positive vector component instead of attaching a negative sign.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a vector component with its scalar magnitude. In a tilted coordinate system where +y+y points outward from the surface, any force pointing into the surface has a negative yy-component.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check vector component signs against axis arrows
  • A vector component is positive if it points along the coordinate axis arrow and negative if it points opposite to it.

  • Look at your free-body diagram: since the gravity projection points into the surface (opposite +y+y), write Fgy=−mgcos⁡θF_{gy} = -mg\cos\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that gravity points into the incline, opposite the +y+y-direction: Fgy=−mgcos⁡(30.0∘)F_{gy} = -mg\cos(30.0^\circ).

  2. Evaluate the component: Fgy=−(25.0 kg)(9.80 m/s2)(0.8660)≈−212 NF_{gy} = -(25.0\text{ kg})(9.80\text{ m/s}^2)(0.8660) \approx -212\text{ N}.

  3. Combine both components into the vector: F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N}).

Final answer

(a) F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N}), (b) FN=212 NF_N = 212\text{ N}, (c) ax=4.90 m/s2a_x = 4.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw coordinate arrows on your sketch before writing vector components.

  • Verify whether each component points along or opposite to your chosen positive axes.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the normal force is always simply equal to the full weight m * g without resolving perpendicular to the incline.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fgx=m⋅g⋅sin⁡(30.0∘)=25.0⋅9.80⋅0.500=122.5 NF_{gx} = m \cdot g \cdot \sin(30.0^\circ) = 25.0 \cdot 9.80 \cdot 0.500 = 122.5\text{ N}   ⟹  \implies Fgy=−m⋅g⋅cos⁡(30.0∘)=−25.0⋅9.80⋅0.866=−212.2 NF_{gy} = -m \cdot g \cdot \cos(30.0^\circ) = -25.0 \cdot 9.80 \cdot 0.866 = -212.2\text{ N}   ⟹  \implies F⃗g=(122.5 N,−212.2 N)\vec{F}_g = (122.5\text{ N}, -212.2\text{ N})

  2. Step 2

    FN=m⋅g=25.0⋅9.80=245 NF_N = m \cdot g = 25.0 \cdot 9.80 = 245\text{ N}

    Correct

    ∑Fy=0  ⟹  FN−mgcos⁡θ=0  ⟹  FN=mgcos⁡θ≈212 N\sum F_y = 0 \implies F_N - mg\cos\theta = 0 \implies F_N = mg\cos\theta \approx 212\text{ N}

    You set the normal force equal to the total weight mgmg. On an inclined plane, the ramp only balances the perpendicular component of gravity, so FN=−Fgy=mgcos⁡(30.0∘)≈212 NF_N = -F_{gy} = mg\cos(30.0^\circ) \approx 212\text{ N}.

  3. Step 3

    ax=Fgx/m=122.5/25.0=4.90 m/s2a_x = F_{gx} / m = 122.5 / 25.0 = 4.90\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly decomposed the gravitational force into components along and perpendicular to the incline.

You correctly identified that the acceleration down the ramp is driven solely by the parallel force component FgxF_{gx}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating normal force to total weight on an incline

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that normal force is universally equal to mgmg without setting up Newton's second law along the perpendicular yy-axis where ∑Fy=FN−mgcos⁡θ=0\sum F_y = F_N - mg\cos\theta = 0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Normal Force on an Inclined Plane
  • The normal force acts perpendicular to the surface. For an incline of angle θ\theta with no perpendicular acceleration and no extra perpendicular applied forces, ∑Fy=0  ⟹  FN=mgcos⁡θ\sum F_y = 0 \implies F_N = mg\cos\theta.

  • Always set up ∑Fy=may=0\sum F_y = m a_y = 0 along the tilted yy-axis rather than defaulting to FN=mgF_N = mg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Along the yy-axis (perpendicular to the incline), the crate does not accelerate, so ∑Fy=may=0\sum F_y = m a_y = 0.

  2. Write the sum of forces in the yy-direction: FN+Fgy=0  ⟹  FN−mgcos⁡(30.0∘)=0F_N + F_{gy} = 0 \implies F_N - mg\cos(30.0^\circ) = 0.

  3. Solve for the normal force: FN=mgcos⁡(30.0∘)=(25.0 kg)(9.80 m/s2)cos⁡(30.0∘)≈212 NF_N = mg\cos(30.0^\circ) = (25.0\text{ kg})(9.80\text{ m/s}^2)\cos(30.0^\circ) \approx 212\text{ N}.

Final answer

(a) F⃗g=(123 N,−212 N)\vec{F}_g = (123\text{ N}, -212\text{ N}), (b) FN=212 NF_N = 212\text{ N}, (c) ax=4.90 m/s2a_x = 4.90\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Before calculating the normal force, sketch a free-body diagram showing the tilted yy-axis perpendicular to the ramp.

  • Write out ∑Fy=0\sum F_y = 0 explicitly to identify which component of gravity directly opposes FNF_N.

Lock it in

Similar question

01

A block of mass m=12.0 kgm = 12.0\text{ kg} is placed on a frictionless incline tilted at θ=20.0∘\theta = 20.0^\circ to the horizontal. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the magnitude of the component of the gravitational force acting perpendicular to the incline.

Answer

Fg,⊥=mgcos⁡θ=(12.0 kg)(9.80 m/s2)cos⁡(20.0∘)≈110.5 NF_{g,\perp} = mg\cos\theta = (12.0\text{ kg})(9.80\text{ m/s}^2)\cos(20.0^\circ) \approx 110.5\text{ N}.

02

A 40.0 kg40.0\text{ kg} sled slides down a frictionless hill inclined at θ=35.0∘\theta = 35.0^\circ below the horizontal. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the magnitude of the normal force exerted by the hill on the sled and the sled's downhill acceleration.

Answer

FN=mgcos⁡θ=(40.0)(9.80)cos⁡(35.0∘)≈321 NF_N = mg\cos\theta = (40.0)(9.80)\cos(35.0^\circ) \approx 321\text{ N}; a=gsin⁡θ=(9.80)sin⁡(35.0∘)≈5.62 m/s2a = g\sin\theta = (9.80)\sin(35.0^\circ) \approx 5.62\text{ m/s}^2.

03

A crate of mass m=15.0 kgm = 15.0\text{ kg} is held at rest on a ramp inclined at θ=25.0∘\theta = 25.0^\circ above the horizontal by an external pushing force directed straight up along the incline. If the coefficient of static friction is μs=0.200\mu_s = 0.200 and g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the minimum pushing force PP along the incline required to prevent the crate from slipping down.

Answer

Pmin=mgsin⁡θ−fs,max=mgsin⁡θ−μsmgcos⁡θ=(15.0)(9.80)[sin⁡(25.0∘)−0.200cos⁡(25.0∘)]≈35.5 NP_{\text{min}} = mg\sin\theta - f_{s,\text{max}} = mg\sin\theta - \mu_s mg\cos\theta = (15.0)(9.80)[\sin(25.0^\circ) - 0.200\cos(25.0^\circ)] \approx 35.5\text{ N}.

Loading workspace…