Resources

A particle is located at position vector r⃗=(−2.00 m)i^+(3.00 m)j^\vec{r} = (-2.00\text{ m})\hat{i} + (3.00\text{ m})\hat{j} relative to the origin. A constant force F⃗=(4.00 N)i^−(5.00 N)j^\vec{F} = (4.00\text{ N})\hat{i} - (5.00\text{ N})\hat{j} acts on the particle. Using the formal vector cross product definition τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, calculate the resulting torque vector about the origin. Explicitly state whether this torque acts along the +k^+\hat{k} or −k^-\hat{k} direction and identify whether it corresponds to a clockwise or counterclockwise rotational tendency in the xyxy-plane.

Answer and steps

Final answer

τ⃗=−2.00 N⋅m  k^\vec{\tau} = -2.00\text{ N}\cdot\text{m}\;\hat{k} (acting in the −k^-\hat{k} direction, corresponding to a clockwise rotational tendency)

Steps

01

Vector Cross Product Definition of Torque

The torque τ⃗\vec{\tau} exerted by a force F⃗\vec{F} relative to the origin is given by the cross product: τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}

Given the two-dimensional vectors in the xyxy-plane:

  • Position vector: r⃗=(−2.00 m)i^+(3.00 m)j^\vec{r} = (-2.00\text{ m})\hat{i} + (3.00\text{ m})\hat{j}
  • Force vector: F⃗=(4.00 N)i^−(5.00 N)j^\vec{F} = (4.00\text{ N})\hat{i} - (5.00\text{ N})\hat{j}

02

Computing the Cross Product

For vectors lying entirely in the xyxy-plane, the cross product produces a vector directed entirely along the zz-axis (k^\hat{k}): τ⃗=(rxi^+ryj^)×(Fxi^+Fyj^)\vec{\tau} = (r_x\hat{i} + r_y\hat{j}) \times (F_x\hat{i} + F_y\hat{j})

Using the fundamental unit vector relations i^×i^=0⃗\hat{i} \times \hat{i} = \vec{0}, j^×j^=0⃗\hat{j} \times \hat{j} = \vec{0}, and i^×j^=k^=−j^×i^\hat{i} \times \hat{j} = \hat{k} = -\hat{j} \times \hat{i}: τ⃗=(rxFy−ryFx)k^\vec{\tau} = (r_x F_y - r_y F_x)\hat{k}

Substitute the given components into the equation:

  • rx=−2.00 mr_x = -2.00\text{ m}, ry=3.00 m\quad r_y = 3.00\text{ m}
  • Fx=4.00 NF_x = 4.00\text{ N}, Fy=−5.00 N\quad F_y = -5.00\text{ N}

τz=(−2.00 m)(−5.00 N)−(3.00 m)(4.00 N)\tau_z = (-2.00\text{ m})(-5.00\text{ N}) - (3.00\text{ m})(4.00\text{ N}) τz=10.00 N⋅m−12.00 N⋅m=−2.00 N⋅m\tau_z = 10.00\text{ N}\cdot\text{m} - 12.00\text{ N}\cdot\text{m} = -2.00\text{ N}\cdot\text{m}

Thus, the torque vector is: τ⃗=−2.00 N⋅m  k^\vec{\tau} = -2.00\text{ N}\cdot\text{m}\;\hat{k}

Common Pitfall: The order in the cross product is strictly r⃗×F⃗\vec{r} \times \vec{F}. Reversing the order to F⃗×r⃗\vec{F} \times \vec{r} reverses the sign of the result. Also, be careful to track the signs of negative components, such as (−2.00)⋅(−5.00)=+10.00(-2.00) \cdot (-5.00) = +10.00.


03

Determining the Physical Direction and Sense of Rotation

In a standard right-handed Cartesian coordinate system:

  1. Vector Direction: The negative sign indicates that the torque vector points along the −k^-\hat{k} direction (directed into the xyxy-plane).
  2. Rotational Tendency: By the right-hand rule, pointing your right thumb along +k^+\hat{k} (out of the page) corresponds to counterclockwise rotation. Consequently, a torque pointing along −k^-\hat{k} (thumb into the page) corresponds to a clockwise rotational tendency about the origin.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the order of the vector cross product by calculating F × r instead of r × F, producing a torque with the opposite sign.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ⃗=F⃗×r⃗  ⟹  τ⃗=[(4.00 N)(3.00 m)−(−5.00 N)(−2.00 m)]k^  ⟹  τ⃗=(12.00−10.00)k^ N⋅m=2.00 N⋅m  k^\vec{\tau} = \vec{F} \times \vec{r} \implies \vec{\tau} = [(4.00\text{ N})(3.00\text{ m}) - (-5.00\text{ N})(-2.00\text{ m})]\hat{k} \implies \vec{\tau} = (12.00 - 10.00)\hat{k}\text{ N}\cdot\text{m} = 2.00\text{ N}\cdot\text{m}\;\hat{k}

    Correct

    τ⃗=r⃗×F⃗=(rxFy−ryFx)k^=[(−2.00 m)(−5.00 N)−(3.00 m)(4.00 N)]k^=−2.00 N⋅m  k^\vec{\tau} = \vec{r} \times \vec{F} = (r_x F_y - r_y F_x)\hat{k} = [(-2.00\text{ m})(-5.00\text{ N}) - (3.00\text{ m})(4.00\text{ N})]\hat{k} = -2.00\text{ N}\cdot\text{m}\;\hat{k}

    You reversed the order of the cross product by computing F⃗×r⃗\vec{F} \times \vec{r}. The formal physical definition of torque is strictly position crossed into force, τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}. Since A⃗×B⃗=−(B⃗×A⃗)\vec{A} \times \vec{B} = -(\vec{B} \times \vec{A}), swapping the order flipped the resulting sign from negative to positive.

  2. Step 2

    The torque acts along the +k^+\hat{k} direction.

    Correct

    The torque acts along the −k^-\hat{k} direction.

    Your conclusion followed logically from your +2.00 N⋅m  k^+2.00\text{ N}\cdot\text{m}\;\hat{k} result, but the correct torque component is negative, which means the torque points along the −k^-\hat{k} direction (into the page).

  3. Step 3

    A +k^+\hat{k} torque points out of the page, which corresponds to a counterclockwise rotational tendency.

    Correct

    A −k^-\hat{k} torque points into the page, which corresponds to a clockwise rotational tendency.

    You applied the right-hand rule correctly for a +k^+\hat{k} vector, but because the true torque vector points along −k^-\hat{k}, curling your fingers in the direction of rotation with your right thumb pointing into the page yields a clockwise rotational tendency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the numerical product terms from your setup.

You correctly associated a vector pointing along +k^+\hat{k} with a counterclockwise rotation in the xyxy-plane.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed cross-product order

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the vector cross product as commutative or recalled the formula for torque as F⃗×r⃗\vec{F} \times \vec{r}. In physics, the torque vector is strictly defined as the lever arm crossed into the applied force: τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross Product Order Definition
  • Torque is always τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}, never F⃗×r⃗\vec{F} \times \vec{r}.

  • Always write the position vector r⃗\vec{r} as the first factor and the force vector F⃗\vec{F} as the second factor when setting up the determinant or component formula.

Anticommutativity of Vector Products
  • For any two vectors, A⃗×B⃗=−(B⃗×A⃗)\vec{A} \times \vec{B} = -(\vec{B} \times \vec{A}).

  • Check that the zz-component formula is written as τz=rxFy−ryFx\tau_z = r_x F_y - r_y F_x before substituting numerical coordinates.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the formal vector cross product: τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}.

  2. Write the zz-component formula: τz=rxFy−ryFx\tau_z = r_x F_y - r_y F_x.

  3. Substitute the given components: τz=(−2.00 m)(−5.00 N)−(3.00 m)(4.00 N)=10.00 N⋅m−12.00 N⋅m=−2.00 N⋅m\tau_z = (-2.00\text{ m})(-5.00\text{ N}) - (3.00\text{ m})(4.00\text{ N}) = 10.00\text{ N}\cdot\text{m} - 12.00\text{ N}\cdot\text{m} = -2.00\text{ N}\cdot\text{m}.

  4. Identify the vector direction: the negative sign indicates the −k^-\hat{k} direction.

  5. Determine the rotational sense: pointing the right thumb in the −k^-\hat{k} direction (into the page) curls the fingers clockwise in the xyxy-plane.

Final answer

τ⃗=−2.00 N⋅m  k^\vec{\tau} = -2.00\text{ N}\cdot\text{m}\;\hat{k} (pointing in the −k^-\hat{k} direction, corresponding to a clockwise rotational tendency)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard mnemonic: 'r comes before F alphabetically' to remember τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F}.

  • Practice computing 2D torque components directly using τz=rxFy−ryFx\tau_z = r_x F_y - r_y F_x to prevent accidental vector order swaps.

OverviewACEpath Teacher's Diagnosis

02 The student adds the cross terms instead of subtracting them when computing the determinant or cross product, leading to an incorrect magnitude of -22.00 N·m k^.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    τ=(xFy+yFx)k^  ⟹  τ=[(−2.00 m)(−5.00 N)+(3.00 m)(4.00 N)]k^  ⟹  τ=(10.00+12.00)k^ N⋅m=22.00 N⋅m k^\tau = (x F_y + y F_x) \hat{k} \implies \tau = [(-2.00\text{ m})(-5.00\text{ N}) + (3.00\text{ m})(4.00\text{ N})] \hat{k} \implies \tau = (10.00 + 12.00)\hat{k}\text{ N}\cdot\text{m} = 22.00\text{ N}\cdot\text{m }\hat{k}

    Correct

    τ⃗=(rxFy−ryFx)k^=[(−2.00 m)(−5.00 N)−(3.00 m)(4.00 N)]k^=−2.00 N⋅m k^\vec{\tau} = (r_x F_y - r_y F_x)\hat{k} = [(-2.00\text{ m})(-5.00\text{ N}) - (3.00\text{ m})(4.00\text{ N})]\hat{k} = -2.00\text{ N}\cdot\text{m }\hat{k}

    In the vector cross product r⃗×F⃗\vec{r} \times \vec{F}, the zz-component comes from (rxi^×Fyj^)+(ryj^×Fxi^)(r_x\hat{i} \times F_y\hat{j}) + (r_y\hat{j} \times F_x\hat{i}). Since j^×i^=−k^\hat{j} \times \hat{i} = -\hat{k}, the second term must be subtracted: (rxFy−ryFx)k^(r_x F_y - r_y F_x)\hat{k}.

  2. Step 2

    The torque acts along the +k∧+k^{\wedge} direction.

    Correct

    The torque acts along the −k^-\hat{k} direction.

    Because of the addition error in Step 1, you obtained a positive value (+22.00+22.00) rather than the correct negative value (−2.00 N⋅m-2.00\text{ N}\cdot\text{m}). The negative sign indicates the vector points along −k^-\hat{k}.

  3. Step 3

    A +k∧+k^{\wedge} torque corresponds to a counterclockwise rotational tendency.

    Correct

    A −k^-\hat{k} torque corresponds to a clockwise rotational tendency.

    While your conceptual rule linking +k^+\hat{k} to counterclockwise rotation is correct by the right-hand rule, the actual torque points along −k^-\hat{k}, which corresponds to a clockwise rotational tendency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the xx and yy components of both the position vector and the force vector.

You correctly multiplied negative numbers, calculating (−2.00)(−5.00)=+10.00(-2.00)(-5.00) = +10.00.

You understood the physical convention that a positive k^\hat{k} torque corresponds to counterclockwise rotation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cross Product Determinant Sign Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the 2D cross product formula with a plus sign as (xFy+yFx)k^(x F_y + y F_x)\hat{k} rather than subtracting the second product as (xFy−yFx)k^(x F_y - y F_x)\hat{k}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Vector Cross Products
  • i^×j^=+k^\hat{i} \times \hat{j} = +\hat{k}, but j^×i^=−k^\hat{j} \times \hat{i} = -\hat{k}.

  • Always subtract the off-diagonal product: A⃗×B⃗=(AxBy−AyBx)k^\vec{A} \times \vec{B} = (A_x B_y - A_y B_x)\hat{k}.

Determinant Memory Aid
  • A 2×22 \times 2 determinant is computed as det⁡(abcd)=ad−bc\det \begin{pmatrix} a & b \\ c & d \end{pmatrix} = ad - bc.

  • Write the vectors in a 2×22 \times 2 grid with r⃗\vec{r} on top and F⃗\vec{F} on the bottom, then subtract the upward diagonal from the downward diagonal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard cross product definition: τ⃗=(rxFy−ryFx)k^\vec{\tau} = (r_x F_y - r_y F_x)\hat{k}.

  2. Substitute the coordinates: τ⃗=[(−2.00)(−5.00)−(3.00)(4.00)]k^=(10.00−12.00)k^=−2.00 N⋅m k^\vec{\tau} = [(-2.00)(-5.00) - (3.00)(4.00)]\hat{k} = (10.00 - 12.00)\hat{k} = -2.00\text{ N}\cdot\text{m }\hat{k}.

  3. Interpret the sign: The −k^-\hat{k} direction points into the page, indicating a clockwise rotation in the xyxy-plane.

Final answer

τ⃗=−2.00 N⋅m k^\vec{\tau} = -2.00\text{ N}\cdot\text{m }\hat{k} (directed along −k^-\hat{k}, representing a clockwise rotational tendency)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the cross product expansion using a 2×22 \times 2 matrix determinant to reinforce the minus sign.

  • Practice computing τ⃗=r⃗×F⃗\vec{\tau} = \vec{r} \times \vec{F} with varied signs to get comfortable tracking the formula's subtraction alongside negative components.

OverviewACEpath Teacher's Diagnosis

03 The student correctly calculates the -k^ torque vector but mistakenly associates the negative z-direction with a counterclockwise rotation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    τ⃗=r⃗×F⃗=[(−2.00 m)(−5.00 N)−(3.00 m)(4.00 N)]k^  ⟹  τ⃗=(10.00−12.00)k^ N⋅m=−2.00 N⋅m k^\vec{\tau} = \vec{r} \times \vec{F} = [(-2.00\text{ m})(-5.00\text{ N}) - (3.00\text{ m})(4.00\text{ N})]\hat{k} \implies \vec{\tau} = (10.00 - 12.00)\hat{k}\text{ N}\cdot\text{m} = -2.00\text{ N}\cdot\text{m}\,\hat{k}

  2. Step 2

    The torque acts along the −k^-\hat{k} direction.

  3. Step 3

    A torque along the −k^-\hat{k} direction corresponds to a counterclockwise rotational tendency.

    Correct

    A torque pointing along −k^-\hat{k} corresponds to a clockwise rotational tendency.

    By the right-hand rule, pointing your right thumb along the positive zz-axis (+k^+\hat{k}, out of the page) curls your fingers counterclockwise, whereas pointing your thumb into the page (−k^-\hat{k}) curls your fingers clockwise.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up and evaluated the 2D vector cross product components accurately.

You correctly identified that the negative sign assigns the torque vector to the −k^-\hat{k} direction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Rotational direction sign convention error

You accidentally reversed the right-hand rule convention that maps the sign of the zz-axis to the direction of rotation in the xyxy-plane.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the angular right-hand rule convention: in a standard right-handed coordinate system, +k^+\hat{k} (thumb pointing out of the page) represents counterclockwise rotation, while −k^-\hat{k} (thumb pointing into the page) represents clockwise rotation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Right-Hand Rule for Rotations
  • Point your right thumb along the torque vector axis: curled fingers show the rotational tendency.

  • Align your right thumb into the page along −k^-\hat{k}; observe that your fingers curl clockwise in the xyxy-plane.

Standard Sign Convention in the xy-Plane
  • +k^⟷Counterclockwise (CCW)+\hat{k} \longleftrightarrow \text{Counterclockwise (CCW)}; −k^⟷Clockwise (CW)-\hat{k} \longleftrightarrow \text{Clockwise (CW)}.

  • Verify the rotational sense by sketching r⃗\vec{r} and F⃗\vec{F} from the origin to check visually which way the force turns the position vector.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that in standard right-handed Cartesian coordinates, the +z+z direction (+k^+\hat{k}) points out of the page and corresponds to counterclockwise rotation.

  2. Since τ⃗=−2.00 N⋅m k^\vec{\tau} = -2.00\text{ N}\cdot\text{m}\,\hat{k} points along −k^-\hat{k} (into the page), point your right thumb into the page.

  3. Your right-hand fingers curl clockwise in the xyxy-plane.

Final answer

τ⃗=−2.00 N⋅m k^\vec{\tau} = -2.00\text{ N}\cdot\text{m}\,\hat{k}, acting along the −k^-\hat{k} direction, corresponding to a clockwise rotational tendency.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard right-hand rule association between axis direction and planar rotation.

  • Practice visualizing 2D torque by sketching the lever arm and force to confirm clockwise vs. counterclockwise sense before assigning vector signs.

Lock it in

Similar question

01

A force F⃗=(6.0 N)j^\vec{F} = (6.0\text{ N})\hat{j} acts on a point located at r⃗=(3.0 m)i^\vec{r} = (3.0\text{ m})\hat{i}. Calculate the torque vector τ⃗\vec{\tau} about the origin and state its rotational sense in the xyxy-plane.

Answer

τ⃗=r⃗×F⃗=(3.0i^)×(6.0j^)=18 N⋅m  k^\vec{\tau} = \vec{r} \times \vec{F} = (3.0\hat{i}) \times (6.0\hat{j}) = 18\text{ N}\cdot\text{m}\;\hat{k} (counterclockwise rotation).

02

A particle is at r⃗=(1.0 m)i^+(4.0 m)j^\vec{r} = (1.0\text{ m})\hat{i} + (4.0\text{ m})\hat{j}. A force F⃗=(2.0 N)i^+(3.0 N)j^\vec{F} = (2.0\text{ N})\hat{i} + (3.0\text{ N})\hat{j} acts on it. Find the torque vector τ⃗\vec{\tau} about the origin and state whether it acts along +k^+\hat{k} or −k^-\hat{k}.

Answer

τz=rxFy−ryFx=(1.0)(3.0)−(4.0)(2.0)=3.0−8.0=−5.0 N⋅m\tau_z = r_x F_y - r_y F_x = (1.0)(3.0) - (4.0)(2.0) = 3.0 - 8.0 = -5.0\text{ N}\cdot\text{m}. Thus, τ⃗=−5.0 N⋅m  k^\vec{\tau} = -5.0\text{ N}\cdot\text{m}\;\hat{k}, acting along −k^-\hat{k}.

03

Two forces act on a body at position r⃗=(−1.0 m)i^+(2.0 m)j^\vec{r} = (-1.0\text{ m})\hat{i} + (2.0\text{ m})\hat{j}: F⃗1=(3.0 N)i^−(2.0 N)j^\vec{F}_1 = (3.0\text{ N})\hat{i} - (2.0\text{ N})\hat{j} and F⃗2=(−1.0 N)i^+(5.0 N)j^\vec{F}_2 = (-1.0\text{ N})\hat{i} + (5.0\text{ N})\hat{j}. Find the net torque τ⃗net\vec{\tau}_{\text{net}} about the origin.

Answer

Net force is F⃗net=F⃗1+F⃗2=(2.0 N)i^+(3.0 N)j^\vec{F}_{\text{net}} = \vec{F}_1 + \vec{F}_2 = (2.0\text{ N})\hat{i} + (3.0\text{ N})\hat{j}. Then τz=rxFy,net−ryFx,net=(−1.0)(3.0)−(2.0)(2.0)=−3.0−4.0=−7.0 N⋅m  k^\tau_z = r_x F_{y,\text{net}} - r_y F_{x,\text{net}} = (-1.0)(3.0) - (2.0)(2.0) = -3.0 - 4.0 = -7.0\text{ N}\cdot\text{m}\;\hat{k}.

Loading workspace…