Resources

A student investigating the hearing threshold of a mammalian subject lowers the volume of a 2.50 kHz2.50\text{ kHz} acoustic transducer until the sound level approaches the absolute threshold of hearing, β→0.00 dB\beta \to 0.00\text{ dB}, where the intensity reaches I=I0=1.00×10−12 W/m2I = I_0 = 1.00 \times 10^{-12}\text{ W/m}^2. The air temperature is 20.0∘C20.0^\circ\text{C} (density ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, speed of sound v=343 m/sv = 343\text{ m/s}). (a) In this asymptotic limit of zero decibels, calculate the minimum pressure amplitude ΔPmin\Delta P_{\text{min}} in Pascals. (b) Calculate the corresponding displacement amplitude smins_{\text{min}} of the air molecules. (c) Compare smins_{\text{min}} to the diameter of a typical hydrogen atom (datom≈1.06×10−10 md_{\text{atom}} \approx 1.06 \times 10^{-10}\text{ m}) by calculating the ratio smindatom\frac{s_{\text{min}}}{d_{\text{atom}}}, and comment on the remarkable sensitivity of the ear in detecting sub-atomic displacement amplitudes.

Answer and steps

Final answer

(a) ΔPmin=2.87×10−5 Pa\Delta P_{\text{min}} = 2.87 \times 10^{-5}\text{ Pa}; (b) smin=4.44×10−12 ms_{\text{min}} = 4.44 \times 10^{-12}\text{ m}; (c) smindatom≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} \approx 0.0419 (or ≈4.2%\approx 4.2\% of an atomic diameter), showing that human hearing can resolve coherent collective displacements orders of magnitude smaller than individual atomic dimensions.

Steps

Part (a): Pressure Amplitude ΔPmin\Delta P_{\text{min}}

The intensity II of a longitudinal sound wave is related to its pressure variation amplitude ΔP\Delta P by: I=ΔP22ρvI = \frac{\Delta P^2}{2\rho v}

where:

  • ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3 is the density of air,
  • v=343 m/sv = 343\text{ m/s} is the speed of sound,
  • I=1.00×10−12 W/m2I = 1.00 \times 10^{-12}\text{ W/m}^2 is the threshold intensity.

Rearranging for ΔPmin\Delta P_{\text{min}}: ΔPmin=2ρvI\Delta P_{\text{min}} = \sqrt{2\rho v I}

Substitute the given values: ΔPmin=2⋅(1.20 kg/m3)⋅(343 m/s)⋅(1.00×10−12 W/m2)\Delta P_{\text{min}} = \sqrt{2 \cdot (1.20\text{ kg/m}^3) \cdot (343\text{ m/s}) \cdot (1.00 \times 10^{-12}\text{ W/m}^2)} ΔPmin=8.232×10−10 Pa2≈2.87×10−5 Pa\Delta P_{\text{min}} = \sqrt{8.232 \times 10^{-10}\text{ Pa}^2} \approx 2.87 \times 10^{-5}\text{ Pa}


Part (b): Displacement Amplitude smins_{\text{min}}

The pressure amplitude is linked to the displacement amplitude smins_{\text{min}} by: ΔPmin=ρvωsmin\Delta P_{\text{min}} = \rho v \omega s_{\text{min}}

where ω=2πf\omega = 2\pi f is the angular frequency. For f=2.50 kHz=2.50×103 Hzf = 2.50\text{ kHz} = 2.50 \times 10^3\text{ Hz}: ω=2π⋅(2.50×103 s−1)≈1.571×104 rad/s\omega = 2\pi \cdot (2.50 \times 10^3\text{ s}^{-1}) \approx 1.571 \times 10^4\text{ rad/s}

Solving for smins_{\text{min}}: smin=ΔPminρvωs_{\text{min}} = \frac{\Delta P_{\text{min}}}{\rho v \omega}

Substitute the values: smin=2.869×10−5 Pa(1.20 kg/m3)⋅(343 m/s)⋅(1.571×104 rad/s)s_{\text{min}} = \frac{2.869 \times 10^{-5}\text{ Pa}}{(1.20\text{ kg/m}^3) \cdot (343\text{ m/s}) \cdot (1.571 \times 10^4\text{ rad/s})} smin=2.869×10−56.466×106 m≈4.44×10−12 ms_{\text{min}} = \frac{2.869 \times 10^{-5}}{6.466 \times 10^6}\text{ m} \approx 4.44 \times 10^{-12}\text{ m}

Pitfall: Ensure the frequency is converted from kilohertz (kHz\text{kHz}) to hertz (Hz\text{Hz}) before calculating the angular frequency ω\omega.


Part (c): Comparison with Atomic Diameter

Calculate the ratio of the displacement amplitude to the diameter of a hydrogen atom (datom≈1.06×10−10 md_{\text{atom}} \approx 1.06 \times 10^{-10}\text{ m}): smindatom=4.44×10−12 m1.06×10−10 m≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419

This ratio corresponds to approximately 4.2%4.2\% of an atomic diameter.

This demonstrates that the mammalian ear can detect coherent collective displacements of air molecules and mechanical vibrations of the eardrum that are significantly smaller than the size of an individual atom.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 2 in the intensity formula for a harmonic sound wave, calculating ΔP = √(ρvI) instead of √(2ρvI).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=(ΔP)2ρv  ⟹  ΔP=ρvI=1.20×343×1.00×10−12=2.03×10−5 PaI = \frac{(\Delta P)^2}{\rho v} \implies \Delta P = \sqrt{\rho v I} = \sqrt{1.20 \times 343 \times 1.00 \times 10^{-12}} = 2.03 \times 10^{-5}\text{ Pa}

    Correct

    I=(ΔP)22ρv  ⟹  ΔP=2ρvI=2⋅(1.20)⋅(343)⋅(1.00×10−12)≈2.87×10−5 PaI = \frac{(\Delta P)^2}{2\rho v} \implies \Delta P = \sqrt{2\rho v I} = \sqrt{2 \cdot (1.20) \cdot (343) \cdot (1.00 \times 10^{-12})} \approx 2.87 \times 10^{-5}\text{ Pa}

    Sound intensity is a time-averaged quantity involving ⟨sin⁡2(kx−ωt)⟩=12\langle \sin^2(kx - \omega t) \rangle = \frac{1}{2}, which introduces a factor of 22 into the denominator: I=(ΔP)22ρvI = \frac{(\Delta P)^2}{2\rho v}.

  2. Step 2

    ΔP=2πfρvs  ⟹  s=ΔP2πfρv=2.03×10−52π×2500×1.20×343=3.14×10−12 m\Delta P = 2\pi f \rho v s \implies s = \frac{\Delta P}{2\pi f \rho v} = \frac{2.03 \times 10^{-5}}{2\pi \times 2500 \times 1.20 \times 343} = 3.14 \times 10^{-12}\text{ m}

    Correct

    s=ΔP2πfρv=2.87×10−52π×2500×1.20×343≈4.44×10−12 ms = \frac{\Delta P}{2\pi f \rho v} = \frac{2.87 \times 10^{-5}}{2\pi \times 2500 \times 1.20 \times 343} \approx 4.44 \times 10^{-12}\text{ m}

    Your relationship between displacement amplitude and pressure amplitude is correct, as is your conversion of 2.50 kHz2.50\text{ kHz} to 2500 Hz2500\text{ Hz}. This value is affected solely by your initial value of ΔP\Delta P from part (a).

  3. Step 3

    Ratio=sdatom=3.14×10−12 m1.06×10−10 m=0.0296  ⟹  about 3% of an atomic diameter, confirming sub-atomic sensitivity.\text{Ratio} = \frac{s}{d_{\text{atom}}} = \frac{3.14 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} = 0.0296 \implies \text{about } 3\% \text{ of an atomic diameter, confirming sub-atomic sensitivity.}

    Correct

    Ratio=smindatom=4.44×10−12 m1.06×10−10 m≈0.0419  ⟹  about 4.2% of an atomic diameter.\text{Ratio} = \frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 \implies \text{about } 4.2\% \text{ of an atomic diameter.}

    Your ratio calculation and physical conclusion are sound; the numerical value differs only because it uses the displacement amplitude obtained in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly linked the displacement amplitude ss to pressure amplitude ΔP\Delta P using ΔP=ρvωs\Delta P = \rho v \omega s.

You correctly converted frequency from kilohertz to hertz before computing the angular frequency.

You correctly compared the resulting displacement amplitude to the atomic diameter and drew the right physical conclusion about ear sensitivity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing time-average factor of 1/2 in harmonic wave intensity

You set I=(ΔP)2ρvI = \frac{(\Delta P)^2}{\rho v} instead of I=(ΔP)22ρvI = \frac{(\Delta P)^2}{2\rho v}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the instantaneous peak relationship rather than accounting for the time average of the squared sinusoidal wave, where ⟨cos⁡2(ωt)⟩=12\langle \cos^2(\omega t) \rangle = \frac{1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Time-Average Factor in Intensity
  • For harmonic sound waves, average intensity relates to peak pressure by I=(ΔP)22ρvI = \frac{(\Delta P)^2}{2\rho v}, or in terms of rms pressure by I=(ΔPrms)2ρvI = \frac{(\Delta P_{\text{rms}})^2}{\rho v}.

  • Whenever given or calculating peak pressure amplitude ΔP\Delta P, always include the factor of 22 in the denominator of the intensity formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set I=ΔPmin22ρv  ⟹  ΔPmin=2ρvI=2(1.20)(343)(1.00×10−12)≈2.87×10−5 PaI = \frac{\Delta P_{\text{min}}^2}{2\rho v} \implies \Delta P_{\text{min}} = \sqrt{2\rho v I} = \sqrt{2(1.20)(343)(1.00 \times 10^{-12})} \approx 2.87 \times 10^{-5}\text{ Pa}.

  2. Substitute ΔPmin\Delta P_{\text{min}} into smin=ΔPmin2πfρv=2.87×10−52π(2500)(1.20)(343)≈4.44×10−12 ms_{\text{min}} = \frac{\Delta P_{\text{min}}}{2\pi f \rho v} = \frac{2.87 \times 10^{-5}}{2\pi(2500)(1.20)(343)} \approx 4.44 \times 10^{-12}\text{ m}.

  3. Compute the ratio: smindatom=4.44×10−12 m1.06×10−10 m≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 (or 4.2%4.2\%).

Final answer

(a) ΔPmin=2.87×10−5 Pa\Delta P_{\text{min}} = 2.87 \times 10^{-5}\text{ Pa}; (b) smin=4.44×10−12 ms_{\text{min}} = 4.44 \times 10^{-12}\text{ m}; (c) smindatom≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} \approx 0.0419 (about 4.2%4.2\% of an atomic diameter).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how taking the time average of harmonic power produces the factor of 12\frac{1}{2}.

  • Double-check whether formulas are written in terms of peak amplitude (requiring a factor of 2) or root-mean-square values (which absorb the factor of 2).

OverviewACEpath Teacher's Diagnosis

02 The student confuses linear frequency with angular frequency, using ω = f instead of ω = 2πf in the relation ΔP = ρυωs.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=(ΔP)22ρv  ⟹  ΔP=2ρvI=2×1.20×343×1.00×10−12=2.87×10−5 PaI = \frac{(\Delta P)^2}{2\rho v} \implies \Delta P = \sqrt{2\rho v I} = \sqrt{2 \times 1.20 \times 343 \times 1.00 \times 10^{-12}} = 2.87 \times 10^{-5}\text{ Pa}

  2. Step 2

    ΔP=ρvfs  ⟹  s=ΔPρvf=2.87×10−51.20×343×2500=2.79×10−11 m\Delta P = \rho v f s \implies s = \frac{\Delta P}{\rho v f} = \frac{2.87 \times 10^{-5}}{1.20 \times 343 \times 2500} = 2.79 \times 10^{-11}\text{ m}

    Correct

    ΔPmin=ρvωsmin=2πρvfsmin  ⟹  smin=ΔPmin2πρvf≈4.44×10−12 m\Delta P_{\text{min}} = \rho v \omega s_{\text{min}} = 2\pi \rho v f s_{\text{min}} \implies s_{\text{min}} = \frac{\Delta P_{\text{min}}}{2\pi \rho v f} \approx 4.44 \times 10^{-12}\text{ m}

    You substituted linear frequency ff directly into the wave amplitude relation instead of angular frequency ω=2πf\omega = 2\pi f, missing a factor of 2π2\pi in the denominator.

  3. Step 3

    Ratio=sdatom=2.79×10−11 m1.06×10−10 m=0.263  ⟹  26% of an atom’s diameter\text{Ratio} = \frac{s}{d_{\text{atom}}} = \frac{2.79 \times 10^{-11}\text{ m}}{1.06 \times 10^{-10}\text{ m}} = 0.263 \implies 26\%\text{ of an atom's diameter}

    Correct

    smindatom=4.44×10−12 m1.06×10−10 m≈0.0419≈4.2%\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 \approx 4.2\%

    Your ratio calculation and conclusion followed your value of ss correctly, but the numerical result was inflated because of the missing factor of 2π2\pi from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and manipulated the intensity equation relating II and ΔP\Delta P.

You converted the frequency from kilohertz to hertz accurately.

You correctly set up the comparison ratio between displacement amplitude and atomic diameter.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Confusion: Linear vs. Angular Frequency

You wrote ΔP=ρvfs\Delta P = \rho v f s instead of ΔP=ρvωs\Delta P = \rho v \omega s where ω=2πf\omega = 2\pi f.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated ordinary cyclical frequency ff (in Hz\text{Hz}) with angular frequency ω\omega (in rad/s\text{rad/s}) when expressing the acoustic impedance and particle velocity amplitude relations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check angular versus cyclical frequency
  • Particle velocity amplitude in a harmonic wave is umax=ωs=2πfsu_{\text{max}} = \omega s = 2\pi f s, not fsf s.

  • Always rewrite ω\omega explicitly as 2πf2\pi f before substituting numerical values given in Hz\text{Hz} or kHz\text{kHz}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the pressure-displacement relation: ΔPmin=ρvωsmin=2πρvfsmin\Delta P_{\text{min}} = \rho v \omega s_{\text{min}} = 2\pi \rho v f s_{\text{min}}.

  2. Solve for displacement amplitude: smin=ΔPmin2πρvf=2.87×10−5 Pa2π(1.20 kg/m3)(343 m/s)(2500 s−1)≈4.44×10−12 ms_{\text{min}} = \frac{\Delta P_{\text{min}}}{2\pi \rho v f} = \frac{2.87 \times 10^{-5}\text{ Pa}}{2\pi (1.20\text{ kg/m}^3)(343\text{ m/s})(2500\text{ s}^{-1})} \approx 4.44 \times 10^{-12}\text{ m}.

  3. Compute the ratio: smindatom=4.44×10−12 m1.06×10−10 m≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 (about 4.2%4.2\%).

Final answer

(a) ΔPmin=2.87×10−5 Pa\Delta P_{\text{min}} = 2.87 \times 10^{-5}\text{ Pa}; (b) smin=4.44×10−12 ms_{\text{min}} = 4.44 \times 10^{-12}\text{ m}; (c) smindatom≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} \approx 0.0419 (or ≈4.2%\approx 4.2\%).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the harmonic displacement derivative: taking the time derivative of s(x,t)=smaxcos⁡(kx−ωt)s(x,t) = s_{\text{max}}\cos(kx - \omega t) brings down an angular factor ω=2πf\omega = 2\pi f, establishing umax=ωsmaxu_{\text{max}} = \omega s_{\text{max}}.

  • Check units on frequency parameters: whenever a wave equation includes ω\omega, ensure it carries units of rad/s\text{rad/s} by multiplying the frequency in Hz\text{Hz} by 2π2\pi.

OverviewACEpath Teacher's Diagnosis

03 The student fails to convert the frequency from kilohertz to hertz, using f = 2.50 Hz instead of 2500 Hz.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=(ΔP)22ρv  ⟹  ΔP=2ρvI=2×1.20×343×1.00×10−12=2.87×10−5 PaI = \frac{(\Delta P)^2}{2\rho v} \implies \Delta P = \sqrt{2\rho v I} = \sqrt{2 \times 1.20 \times 343 \times 1.00 \times 10^{-12}} = 2.87 \times 10^{-5}\text{ Pa}

  2. Step 2

    ΔP=2πfρvs  ⟹  s=ΔP2πfρv=2.87×10−52π×2.50×1.20×343=4.44×10−9 m\Delta P = 2\pi f \rho v s \implies s = \frac{\Delta P}{2\pi f \rho v} = \frac{2.87 \times 10^{-5}}{2\pi \times 2.50 \times 1.20 \times 343} = 4.44 \times 10^{-9}\text{ m}

    Correct

    smin=ΔPmin2πfρv=2.87×10−5 Pa2π(2500 Hz)(1.20 kg/m3)(343 m/s)≈4.44×10−12 ms_{\text{min}} = \frac{\Delta P_{\text{min}}}{2\pi f \rho v} = \frac{2.87 \times 10^{-5}\text{ Pa}}{2\pi (2500\text{ Hz})(1.20\text{ kg/m}^3)(343\text{ m/s})} \approx 4.44 \times 10^{-12}\text{ m}

    You used the correct relationship between pressure amplitude and displacement amplitude, but you substituted f=2.50f = 2.50 instead of converting 2.50 kHz2.50\text{ kHz} to 2500 Hz2500\text{ Hz} (2.50×103 Hz2.50 \times 10^3\text{ Hz}). This made your displacement amplitude 10310^3 times too large.

  3. Step 3

    Ratio=sdatom=4.44×10−9 m1.06×10−10 m=41.9\text{Ratio} = \frac{s}{d_{\text{atom}}} = \frac{4.44 \times 10^{-9}\text{ m}}{1.06 \times 10^{-10}\text{ m}} = 41.9; "The displacement is about 42 times larger than an atom, so it is larger than an atomic diameter rather than sub-atomic."

    Correct

    smindatom=4.44×10−12 m1.06×10−10 m≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 (about 4.2%4.2\% of an atomic diameter, confirming sub-atomic sensitivity).

    Your ratio calculation and conclusion follow logically from your value of ss, but they are affected by the unit conversion error in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct formula relating sound intensity to pressure amplitude.

You accurately solved for ΔPmin\Delta P_{\text{min}} in part (a).

You correctly identified the physical relationship between pressure amplitude and displacement amplitude: ΔP=ρvωs\Delta P = \rho v \omega s.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error

You substituted the frequency value as 2.502.50 directly without multiplying by 10310^3 to convert kHz\text{kHz} into SI base units (Hz\text{Hz}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking metric prefixes (kilo- = 10310^3) before substituting numerical quantities into standard SI wave formulas.

REASONING PATH
Your ACEpath teacher’s suggested approach
Convert prefixes to SI base units
  • Before substituting into dynamical wave equations, express frequency in Hz\text{Hz} (s−1\text{s}^{-1}): 1 kHz=103 Hz1\text{ kHz} = 10^3\text{ Hz}.

  • Always rewrite values with metric prefixes in scientific notation using base units as your first step.

Use prompt cues for sanity checks
  • Prompts often contain qualitative hints, such as asking you to comment on 'sub-atomic displacement amplitudes'.

  • If your calculated ratio is 41.941.9 (larger than an atom) when the problem explicitly describes the motion as 'sub-atomic', pause and check for a missing power of 1010 in your calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert frequency: f=2.50 kHz=2.50×103 Hzf = 2.50\text{ kHz} = 2.50 \times 10^3\text{ Hz}.

  2. Compute angular frequency: ω=2πf=2π(2500 s−1)≈1.571×104 rad/s\omega = 2\pi f = 2\pi (2500\text{ s}^{-1}) \approx 1.571 \times 10^4\text{ rad/s}.

  3. Substitute into displacement amplitude formula: smin=ΔPminρvω=2.87×10−5 Pa(1.20 kg/m3)(343 m/s)(1.571×104 rad/s)≈4.44×10−12 ms_{\text{min}} = \frac{\Delta P_{\text{min}}}{\rho v \omega} = \frac{2.87 \times 10^{-5}\text{ Pa}}{(1.20\text{ kg/m}^3)(343\text{ m/s})(1.571 \times 10^4\text{ rad/s})} \approx 4.44 \times 10^{-12}\text{ m}.

  4. Re-evaluate the ratio: smindatom=4.44×10−12 m1.06×10−10 m≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} = \frac{4.44 \times 10^{-12}\text{ m}}{1.06 \times 10^{-10}\text{ m}} \approx 0.0419 (approximately 4.2%4.2\% of the diameter of a hydrogen atom).

Final answer

(a) ΔPmin=2.87×10−5 Pa\Delta P_{\text{min}} = 2.87 \times 10^{-5}\text{ Pa}; (b) smin=4.44×10−12 ms_{\text{min}} = 4.44 \times 10^{-12}\text{ m}; (c) smindatom≈0.0419\frac{s_{\text{min}}}{d_{\text{atom}}} \approx 0.0419, confirming that the human ear can detect collective molecular displacements less than one-twentieth the size of a single atom.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review metric prefixes regularly to ensure you convert values such as kHz\text{kHz}, MHz\text{MHz}, mm\text{mm}, or cm\text{cm} into base SI units before calculating.

  • Check your results against qualifying statements in the question prompt to catch order-of-magnitude slips early.

Lock it in

Similar question

01

A sound wave in air (ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, v=343 m/sv = 343\text{ m/s}) has an intensity of I=2.00×10−6 W/m2I = 2.00 \times 10^{-6}\text{ W/m}^2. Calculate its peak pressure amplitude ΔP\Delta P.

Answer

ΔP=2ρvI=2(1.20 kg/m3)(343 m/s)(2.00×10−6 W/m2)≈4.06×10−2 Pa\Delta P = \sqrt{2\rho v I} = \sqrt{2(1.20\text{ kg/m}^3)(343\text{ m/s})(2.00 \times 10^{-6}\text{ W/m}^2)} \approx 4.06 \times 10^{-2}\text{ Pa}.

02

A 1.00 kHz1.00\text{ kHz} acoustic wave traveling through air (ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, v=343 m/sv = 343\text{ m/s}) has a peak pressure amplitude of ΔP=0.500 Pa\Delta P = 0.500\text{ Pa}. (a) Find its intensity II. (b) Find its molecular displacement amplitude ss.

Answer

(a) I=(ΔP)22ρv=(0.500 Pa)22(1.20 kg/m3)(343 m/s)≈3.04×10−4 W/m2I = \frac{(\Delta P)^2}{2\rho v} = \frac{(0.500\text{ Pa})^2}{2(1.20\text{ kg/m}^3)(343\text{ m/s})} \approx 3.04 \times 10^{-4}\text{ W/m}^2. (b) s=ΔPρvω=0.500 Pa(1.20)(343)(2π×1000 s−1)≈1.93×10−7 ms = \frac{\Delta P}{\rho v \omega} = \frac{0.500\text{ Pa}}{(1.20)(343)(2\pi \times 1000\text{ s}^{-1})} \approx 1.93 \times 10^{-7}\text{ m}.

03

Underwater sonar operates at f=15.0 kHzf = 15.0\text{ kHz} in seawater (ρ=1025 kg/m3\rho = 1025\text{ kg/m}^3, v=1500 m/sv = 1500\text{ m/s}) with an intensity of I=1.00×103 W/m2I = 1.00\times 10^3\text{ W/m}^2. Calculate the ratio of the peak pressure amplitude in this underwater wave to that of an airborne sound wave of the same intensity in air (ρair=1.20 kg/m3\rho_{\text{air}} = 1.20\text{ kg/m}^3, vair=343 m/sv_{\text{air}} = 343\text{ m/s}).

Answer

Since ΔP=2ρvI\Delta P = \sqrt{2\rho v I}, the ratio is ΔPwaterΔPair=ρwatervwaterρairvair=(1025)(1500)(1.20)(343)=1.5375×106411.6≈61.1\frac{\Delta P_{\text{water}}}{\Delta P_{\text{air}}} = \sqrt{\frac{\rho_{\text{water}} v_{\text{water}}}{\rho_{\text{air}} v_{\text{air}}}} = \sqrt{\frac{(1025)(1500)}{(1.20)(343)}} = \sqrt{\frac{1.5375 \times 10^6}{411.6}} \approx 61.1. Peak pressure amplitude in water is approximately 61.161.1 times greater for the same intensity due to higher acoustic impedance.

Loading workspace…