Resources

A motorized cargo cart of mass m=120 kgm = 120\text{ kg} is pulled up a smooth ramp inclined at an angle θ\theta above the horizontal. The electric drive motor supplies a constant mechanical power of P=850 WP = 850\text{ W} to maintain a steady cruising speed of v=3.20 m/sv = 3.20\text{ m/s} directly up the incline. Neglecting rolling resistance and air drag, and using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the inclination angle θ\theta of the ramp in degrees.

Answer and steps

Final answer

θ=13.1∘\theta = 13.1^\circ

Steps

Step 1: Relate mechanical power to driving force and velocity

The mechanical power PP delivered to move an object at a constant velocity v⃗\vec{v} with a forward driving force F⃗\vec{F} parallel to the direction of motion is given by:

P=F⋅vP = F \cdot v

Rearranging for the driving force FF applied up the incline gives:

F=PvF = \frac{P}{v}


Step 2: Apply Newton's first law along the incline

Because the cart cruises at a constant speed, its acceleration along the ramp is zero (a=0a = 0). According to Newton's first law, the net force parallel to the incline must be zero:

∑F∥=F−Fg,∥=0\sum F_\parallel = F - F_{g,\parallel} = 0

The component of gravity acting down the ramp is:

Fg,∥=mgsin⁡θF_{g,\parallel} = mg \sin\theta

Equating the driving force to this gravitational component:

F=mgsin⁡θF = mg \sin\theta

Common Pitfall: Be careful not to use mgcos⁡θmg \cos\theta for the force along the ramp. The cosine component (mgcos⁡θmg \cos\theta) acts perpendicular to the surface and is balanced by the normal force, while the sine component (mgsin⁡θmg \sin\theta) acts parallel to the incline.


Step 3: Combine equations to solve for sin⁡θ\sin\theta

Substitute F=PvF = \frac{P}{v} into the force equilibrium equation:

Pv=mgsin⁡θ\frac{P}{v} = mg \sin\theta

Rearranging for sin⁡θ\sin\theta:

sin⁡θ=Pmgv\sin\theta = \frac{P}{mgv}


Step 4: Substitute the given values and compute θ\theta

Substitute P=850 WP = 850\text{ W}, m=120 kgm = 120\text{ kg}, g=9.80 m/s2g = 9.80\text{ m/s}^2, and v=3.20 m/sv = 3.20\text{ m/s}:

sin⁡θ=850120⋅9.80⋅3.20=8503763.2≈0.22587\sin\theta = \frac{850}{120 \cdot 9.80 \cdot 3.20} = \frac{850}{3763.2} \approx 0.22587

Taking the inverse sine:

θ=arcsin⁡(0.22587)≈13.06∘≈13.1∘\theta = \arcsin(0.22587) \approx 13.06^\circ \approx 13.1^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the parallel component of gravity with the perpendicular component, writing cos(θ) instead of sin(θ).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=m⋅g⋅cos⁡(θ)F = m \cdot g \cdot \cos(\theta)

    Correct

    F=m⋅g⋅sin⁡(θ)F = m \cdot g \cdot \sin(\theta)

    You resolved the force of gravity along the incline using cos⁡(θ)\cos(\theta) instead of sin⁡(θ)\sin(\theta). For an incline of angle θ\theta above the horizontal, the component of gravity acting parallel to the surface is mgsin⁡(θ)mg\sin(\theta), whereas mgcos⁡(θ)mg\cos(\theta) acts perpendicular to the surface.

  2. Step 2

    P=F⋅v=m⋅g⋅v⋅cos⁡(θ)  ⟹  cos⁡(θ)=Pm⋅g⋅vP = F \cdot v = m \cdot g \cdot v \cdot \cos(\theta) \implies \cos(\theta) = \frac{P}{m \cdot g \cdot v}

    Correct

    P=F⋅v=m⋅g⋅v⋅sin⁡(θ)  ⟹  sin⁡(θ)=Pm⋅g⋅vP = F \cdot v = m \cdot g \cdot v \cdot \sin(\theta) \implies \sin(\theta) = \frac{P}{m \cdot g \cdot v}

    Your algebraic isolation of the trigonometric ratio from P=FvP = Fv is mathematically sound, but it carries forward the incorrect cosine term from Step 1.

  3. Step 3

    cos⁡(θ)=850120⋅9.80⋅3.20=8503763.2≈0.2259\cos(\theta) = \frac{850}{120 \cdot 9.80 \cdot 3.20} = \frac{850}{3763.2} \approx 0.2259

    Correct

    sin⁡(θ)=850120⋅9.80⋅3.20=8503763.2≈0.2259\sin(\theta) = \frac{850}{120 \cdot 9.80 \cdot 3.20} = \frac{850}{3763.2} \approx 0.2259

    You evaluated the arithmetic values correctly, but the resulting ratio represents sin⁡(θ)\sin(\theta), not cos⁡(θ)\cos(\theta).

  4. Step 4

    θ=arccos⁡(0.2259)≈76.9∘\theta = \arccos(0.2259) \approx 76.9^\circ

    Correct

    θ=arcsin⁡(0.2259)≈13.1∘\theta = \arcsin(0.2259) \approx 13.1^\circ

    Because sin⁡(θ)≈0.2259\sin(\theta) \approx 0.2259, taking the inverse sine gives θ≈13.1∘\theta \approx 13.1^\circ rather than the complementary angle found using arccosine.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the power formula P=FvP = Fv for constant-velocity motion.

You accurately substituted the numerical values and computed the intermediate fraction.

You correctly applied the inverse trigonometric function to solve for θ\theta based on your earlier equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the parallel and perpendicular components of weight on an incline, assigning cos⁡(θ)\cos(\theta) to the direction along the ramp instead of perpendicular to it.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolving Weight on an Incline
  • For an angle θ\theta measured from the horizontal, the component of gravity pulling along the ramp is Fg,∥=mgsin⁡(θ)F_{g,\parallel} = mg\sin(\theta), while the component pressing into the ramp is Fg,⊥=mgcos⁡(θ)F_{g,\perp} = mg\cos(\theta).

  • Always test the limit: as θ→0∘\theta \to 0^\circ (flat ground), the force pulling an object along the surface must vanish, so it must depend on sin⁡(0∘)=0\sin(0^\circ) = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the driving force equal to the parallel component of gravity: F=mgsin⁡(θ)F = mg\sin(\theta).

  2. Substitute into the power formula: P=Fv=mgvsin⁡(θ)P = Fv = mgv\sin(\theta).

  3. Rearrange for sin⁡(θ)\sin(\theta): sin⁡(θ)=Pmgv=850120⋅9.80⋅3.20≈0.22587\sin(\theta) = \frac{P}{mgv} = \frac{850}{120 \cdot 9.80 \cdot 3.20} \approx 0.22587.

  4. Take the inverse sine: θ=arcsin⁡(0.22587)≈13.1∘\theta = \arcsin(0.22587) \approx 13.1^\circ.

Final answer

θ=13.1∘\theta = 13.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector decomposition on inclined planes by sketching the right triangle formed by the weight vector and the ramp surface.

  • Practice checking extreme angles ( θ=0∘\,\theta = 0^\circ and θ=90∘\theta = 90^\circ) to verify whether a component should take sine or cosine.

OverviewACEpath Teacher's Diagnosis

02 The student neglects the angle of the incline when balancing forces, assuming the pulling force equals the full weight m·g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    F=m⋅g=120⋅9.80=1176 NF = m \cdot g = 120 \cdot 9.80 = 1176\text{ N}

  2. Step 2

    P=F⋅vy=m⋅g⋅vy  ⟹  vy=Pm⋅g=8501176≈0.7228 m/sP = F \cdot v_y = m \cdot g \cdot v_y \implies v_y = \frac{P}{m \cdot g} = \frac{850}{1176} \approx 0.7228\text{ m/s}

  3. Step 3

    sin⁡(θ)=vyv=0.72283.20≈0.2259  ⟹  θ=arcsin⁡(0.2259)≈13.1∘\sin(\theta) = \frac{v_y}{v} = \frac{0.7228}{3.20} \approx 0.2259 \implies \theta = \arcsin(0.2259) \approx 13.1^\circ

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the cart's gravitational force as 1176 N1176\text{ N}.

You correctly recognized that at steady cruising speed on a frictionless ramp, the motor's power matches the rate of increase in gravitational potential energy, P=mgvyP = mg v_y.

You correctly related the vertical speed to the ramp speed via sin⁡θ=vyv\sin\theta = \frac{v_y}{v} and solved for θ≈13.1∘\theta \approx 13.1^\circ.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
none
REASONING PATH
Your ACEpath teacher’s suggested approach
Two Equivalent Perspectives on Incline Power
  • For motion at constant speed up a frictionless incline, power can be computed along the incline as P=F∥v=(mgsin⁡θ)vP = F_\parallel v = (mg \sin\theta) v, or vertically as P=mgvy=mg(vsin⁡θ)P = mg v_y = mg (v \sin\theta).

  • Both approaches yield the exact same governing relationship: P=mgvsin⁡θP = mg v \sin\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
Final answer

θ≈13.1∘\theta \approx 13.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Try solving the same problem using Newton's first law along the incline (F∥=mgsin⁡θF_\parallel = mg \sin\theta and P=F∥vP = F_\parallel v) to see how naturally the two methods connect.

  • Practice problems that incorporate kinetic friction or rolling resistance along the incline, where the motor must overcome both gravity (mgsin⁡θmg\sin\theta) and friction (fk=μkmgcos⁡θf_k = \mu_k mg\cos\theta).

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly multiplies by velocity instead of dividing when solving for force from power, using F = P·v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=P⋅v  ⟹  F=850⋅3.20=2720 NF = P \cdot v \implies F = 850 \cdot 3.20 = 2720\text{ N}

    Correct

    P=F⋅v  ⟹  F=Pv=8503.20=265.625 NP = F \cdot v \implies F = \frac{P}{v} = \frac{850}{3.20} = 265.625\text{ N}

    Mechanical power delivered along the direction of motion is defined as P=F⋅vP = F \cdot v. Solving for force requires dividing power by velocity (F=PvF = \frac{P}{v}), not multiplying them.

  2. Step 2

    F=m⋅g⋅sin⁡(θ)  ⟹  sin⁡(θ)=Fm⋅g=2720120⋅9.80=27201176≈2.31F = m \cdot g \cdot \sin(\theta) \implies \sin(\theta) = \frac{F}{m \cdot g} = \frac{2720}{120 \cdot 9.80} = \frac{2720}{1176} \approx 2.31

    Correct

    sin⁡(θ)=Fmg=265.625120⋅9.80=265.6251176≈0.2259\sin(\theta) = \frac{F}{mg} = \frac{265.625}{120 \cdot 9.80} = \frac{265.625}{1176} \approx 0.2259

    Your incline force balance equation and algebraic rearrangement for sin⁡(θ)\sin(\theta) were completely correct, but substituting the incorrect force from Step 1 led to a value greater than 11.

  3. Step 3

    sin⁡(θ)=2.31, which is impossible so θ cannot be determined\sin(\theta) = 2.31\text{, which is impossible so }\theta\text{ cannot be determined}

    Correct

    θ=arcsin⁡(0.2259)≈13.1∘\theta = \arcsin(0.2259) \approx 13.1^\circ

    You recognized that the sine of a real angle cannot exceed 11, which was a great sanity check; using the correct force yields a valid angle of 13.1∘13.1^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly balanced the driving force against the downhill component of gravity using F=mgsin⁡θF = mg\sin\theta.

You correctly recognized that sin⁡θ>1\sin\theta > 1 is mathematically impossible, identifying that an error must have occurred earlier.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted algebraic formula for mechanical power

You recalled the variables PP, FF, and vv together but multiplied them as F=P⋅vF = P \cdot v rather than starting from P=F⋅vP = F \cdot v.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the independent and dependent variables in the power relation P=FvP = Fv, leading to multiplying power by velocity instead of dividing to isolate force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional / Unit Check
  • Power is measured in watts (W=N⋅m/s\text{W} = \text{N}\cdot\text{m/s}), so force must have units of Wm/s=N\frac{\text{W}}{\text{m/s}} = \text{N}.

  • Always verify that your rearranged formula yields newtons: dividing watts by meters per second gives newtons, whereas multiplying gives N⋅m2/s2\text{N}\cdot\text{m}^2/\text{s}^2.

Isolating Variables from Fundamental Definitions
  • Start from the fundamental definition P=F⃗⋅v⃗=FvP = \vec{F} \cdot \vec{v} = Fv before rearranging.

  • Divide both sides by vv to obtain F=PvF = \frac{P}{v}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the driving force using F=Pv=850 W3.20 m/s=265.625 NF = \frac{P}{v} = \frac{850\text{ W}}{3.20\text{ m/s}} = 265.625\text{ N}.

  2. Equate the driving force to the downhill gravitational component: F=mgsin⁡θ  ⟹  sin⁡θ=265.625120⋅9.80≈0.22587F = mg\sin\theta \implies \sin\theta = \frac{265.625}{120 \cdot 9.80} \approx 0.22587.

  3. Calculate the ramp angle: θ=arcsin⁡(0.22587)≈13.1∘\theta = \arcsin(0.22587) \approx 13.1^\circ.

Final answer

θ≈13.1∘\theta \approx 13.1^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between mechanical work, power, and velocity (P=Wt=F⋅dt=FvP = \frac{W}{t} = \frac{F \cdot d}{t} = Fv).

  • Perform dimensional analysis whenever rearranging formulas to ensure the target variable has the correct physical units.

  • When an equation yields an impossible value like sin⁡θ>1\sin\theta > 1, re-check the initial formulas rather than concluding the problem is unsolvable.

Lock it in

Similar question

01

A winch pulls a 200 kg200\text{ kg} crate up a frictionless 30∘30^\circ incline at a steady speed of 1.50 m/s1.50\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the mechanical power delivered by the winch.

Answer

P=1470 WP = 1470\text{ W}. Key steps: F=mgsin⁡(30∘)=200⋅9.80⋅0.50=980 NF = mg\sin(30^\circ) = 200 \cdot 9.80 \cdot 0.50 = 980\text{ N}; then P=Fv=980⋅1.50=1470 WP = Fv = 980 \cdot 1.50 = 1470\text{ W}.

02

An electric vehicle of mass 1500 kg1500\text{ kg} climbs a smooth slope at a steady speed of 20.0 m/s20.0\text{ m/s}. If the motor delivers 75.0 kW75.0\text{ kW} of mechanical power directly to overcoming gravity, determine the inclination angle θ\theta of the hill.

Answer

θ≈14.8∘\theta \approx 14.8^\circ. Key steps: P=mgvsin⁡(θ)  ⟹  sin⁡(θ)=750001500⋅9.80⋅20.0=75000294000≈0.2551P = mgv\sin(\theta) \implies \sin(\theta) = \frac{75000}{1500 \cdot 9.80 \cdot 20.0} = \frac{75000}{294000} \approx 0.2551; θ=arcsin⁡(0.2551)≈14.78∘\theta = \arcsin(0.2551) \approx 14.78^\circ.

03

A conveyor belt of mass m=80 kgm = 80\text{ kg} per package is inclined at θ=20∘\theta = 20^\circ. A constant friction force of fk=50 Nf_k = 50\text{ N} opposes the motion of each package. If the motor delivers 600 W600\text{ W} of useful power per package, find the constant speed vv at which the packages travel up the belt. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

v≈1.89 m/sv \approx 1.89\text{ m/s}. Key steps: Total required driving force is F=mgsin⁡(θ)+fk=80⋅9.80⋅sin⁡(20∘)+50≈268.14+50=318.14 NF = mg\sin(\theta) + f_k = 80 \cdot 9.80 \cdot \sin(20^\circ) + 50 \approx 268.14 + 50 = 318.14\text{ N}; speed is v=PF=600318.14≈1.89 m/sv = \frac{P}{F} = \frac{600}{318.14} \approx 1.89\text{ m/s}.

Loading workspace…