Resources

A motorized laboratory rover travels along a linear calibrated track. Its position x(t)x(t) is tracked by an ultrasonic motion detector. From t=0 st = 0\text{ s} to t=6.0 st = 6.0\text{ s}, the position follows the curve x(t)=(0.50 m/s3)t3−(4.5 m/s2)t2+(12 m/s)tx(t) = (0.50\text{ m/s}^3)t^3 - (4.5\text{ m/s}^2)t^2 + (12\text{ m/s})t. Rather than solving for position, determine: (a) the instantaneous velocity of the rover at the exact moment its acceleration is zero (a(t)=0 m/s2a(t) = 0\text{ m/s}^2), and (b) the average acceleration aavga_{\text{avg}} of the rover over the time interval from t=1.0 st = 1.0\text{ s} to t=5.0 st = 5.0\text{ s}.

Answer and steps

Final answer

(a) v=−1.5 m/sv = -1.5\text{ m/s}; (b) aavg=0 m/s2a_{\text{avg}} = 0\text{ m/s}^2

Steps

Part (a): Instantaneous Velocity When Acceleration is Zero

  1. Find expressions for velocity and acceleration: Velocity v(t)v(t) is the first derivative of position x(t)x(t) with respect to time, and acceleration a(t)a(t) is the first derivative of velocity: x(t)=0.50t3−4.5t2+12tx(t) = 0.50t^3 - 4.5t^2 + 12t v(t)=dxdt=3(0.50)t2−2(4.5)t+12=1.5t2−9.0t+12v(t) = \frac{dx}{dt} = 3(0.50)t^2 - 2(4.5)t + 12 = 1.5t^2 - 9.0t + 12 a(t)=dvdt=2(1.5)t−9.0=3.0t−9.0a(t) = \frac{dv}{dt} = 2(1.5)t - 9.0 = 3.0t - 9.0
  2. Determine the time when a(t)=0 m/s2a(t) = 0\text{ m/s}^2: Set the acceleration equation to zero: 3.0t−9.0=0  ⟹  3.0t=9.0  ⟹  t=3.0 s3.0t - 9.0 = 0 \implies 3.0t = 9.0 \implies t = 3.0\text{ s}
  3. Calculate the velocity at t=3.0 st = 3.0\text{ s}: Substitute t=3.0 st = 3.0\text{ s} into the velocity function: v(3.0)=1.5(3.0)2−9.0(3.0)+12v(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 v(3.0)=1.5(9.0)−27.0+12=13.5−27.0+12=−1.5 m/sv(3.0) = 1.5(9.0) - 27.0 + 12 = 13.5 - 27.0 + 12 = -1.5\text{ m/s}

The negative sign indicates that the rover is momentarily moving in the negative direction along the track.


Part (b): Average Acceleration from t=1.0 st = 1.0\text{ s} to t=5.0 st = 5.0\text{ s}

  1. Recall the definition of average acceleration: The average acceleration aavga_{\text{avg}} over a time interval Δt=t2−t1\Delta t = t_2 - t_1 depends solely on the change in velocity: aavg=ΔvΔt=v(t2)−v(t1)t2−t1a_{\text{avg}} = \frac{\Delta v}{\Delta t} = \frac{v(t_2) - v(t_1)}{t_2 - t_1}
  2. Calculate the instantaneous velocities at t=1.0 st = 1.0\text{ s} and t=5.0 st = 5.0\text{ s}:

    • At t1=1.0 st_1 = 1.0\text{ s}: v(1.0)=1.5(1.0)2−9.0(1.0)+12=1.5−9.0+12=4.5 m/sv(1.0) = 1.5(1.0)^2 - 9.0(1.0) + 12 = 1.5 - 9.0 + 12 = 4.5\text{ m/s}
    • At t2=5.0 st_2 = 5.0\text{ s}: v(5.0)=1.5(5.0)2−9.0(5.0)+12=1.5(25)−45.0+12=37.5−45.0+12=4.5 m/sv(5.0) = 1.5(5.0)^2 - 9.0(5.0) + 12 = 1.5(25) - 45.0 + 12 = 37.5 - 45.0 + 12 = 4.5\text{ m/s}
  3. Compute aavga_{\text{avg}}: aavg=4.5 m/s−4.5 m/s5.0 s−1.0 s=0 m/s4.0 s=0 m/s2a_{\text{avg}} = \frac{4.5\text{ m/s} - 4.5\text{ m/s}}{5.0\text{ s} - 1.0\text{ s}} = \frac{0\text{ m/s}}{4.0\text{ s}} = 0\text{ m/s}^2

(Alternative insight: Because the acceleration a(t)=3.0t−9.0a(t) = 3.0t - 9.0 is linear with time, the average acceleration over any symmetric interval around t=3.0 st = 3.0\text{ s} is simply the instantaneous acceleration at the midpoint, which is a(3.0)=0 m/s2a(3.0) = 0\text{ m/s}^2.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the condition for zero acceleration with zero velocity, setting v(t) = 0 to find the time instead of a(t) = 0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dxdt=1.5t2−9.0t+12v(t) = \frac{dx}{dt} = 1.5t^2 - 9.0t + 12

  2. Step 2

    1.5t2−9.0t+12=0  ⟹  t2−6.0t+8.0=0  ⟹  (t−2.0)(t−4.0)=0  ⟹  t=2.0 s  ⟹  v(2.0)=0 m/s1.5t^2 - 9.0t + 12 = 0 \implies t^2 - 6.0t + 8.0 = 0 \implies (t - 2.0)(t - 4.0) = 0 \implies t = 2.0\text{ s} \implies v(2.0) = 0\text{ m/s}

    Correct

    a(t)=dvdt=3.0t−9.0=0  ⟹  t=3.0 s  ⟹  v(3.0)=1.5(3.0)2−9.0(3.0)+12=−1.5 m/sa(t) = \frac{dv}{dt} = 3.0t - 9.0 = 0 \implies t = 3.0\text{ s} \implies v(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 = -1.5\text{ m/s}

    You set v(t)=0v(t) = 0 instead of a(t)=0a(t) = 0. To find the moment acceleration is zero, differentiate velocity to find acceleration a(t)=3.0t−9.0a(t) = 3.0t - 9.0, set that equal to zero to get t=3.0 st = 3.0\text{ s}, and substitute t=3.0 st = 3.0\text{ s} into v(t)v(t).

  3. Step 3

    aavg=v(5.0)−v(1.0)5.0−1.0  ⟹  v(5.0)=4.5 m/s,  v(1.0)=4.5 m/s  ⟹  aavg=4.5−4.54.0=0 m/s2a_{\text{avg}} = \frac{v(5.0) - v(1.0)}{5.0 - 1.0} \implies v(5.0) = 4.5\text{ m/s},\; v(1.0) = 4.5\text{ m/s} \implies a_{\text{avg}} = \frac{4.5 - 4.5}{4.0} = 0\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the first derivative of position to find the velocity function.

You correctly defined and calculated the average acceleration using the change in velocity over the time interval.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing zero velocity with zero acceleration

Setting v(t)=0v(t) = 0 to find the time when the question asked for the condition a(t)=0a(t) = 0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating instantaneous rest (v=0v = 0) with zero acceleration (a=dvdt=0a = \frac{dv}{dt} = 0), leading to solving for the turning points rather than the inflection point of position.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the target kinematic condition
  • a(t)=dvdt=d2xdt2=0a(t) = \frac{dv}{dt} = \frac{d^2x}{dt^2} = 0, while v(t)=dxdt=0v(t) = \frac{dx}{dt} = 0 represents instantaneous rest.

  • Check whether the problem asks for zero velocity or zero acceleration before setting an equation equal to zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate v(t)v(t) with respect to time: a(t)=dvdt=3.0t−9.0a(t) = \frac{dv}{dt} = 3.0t - 9.0.

  2. Set a(t)=0a(t) = 0: 3.0t−9.0=0  ⟹  t=3.0 s3.0t - 9.0 = 0 \implies t = 3.0\text{ s}.

  3. Evaluate velocity at t=3.0 st = 3.0\text{ s}: v(3.0)=1.5(3.0)2−9.0(3.0)+12=13.5−27.0+12=−1.5 m/sv(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 = 13.5 - 27.0 + 12 = -1.5\text{ m/s}.

Final answer

(a) v=−1.5 m/sv = -1.5\text{ m/s}; (b) aavg=0 m/s2a_{\text{avg}} = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out both v(t)=x′(t)v(t) = x'(t) and a(t)=v′(t)a(t) = v'(t) before applying conditions like 'acceleration is zero'.

  • Double-check that the quantity you set to zero matches the specific derivative named in the prompt.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly calculates average acceleration as change in position divided by elapsed time squared rather than change in velocity divided by time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=1.5t2−9.0t+12  ⟹  a(t)=3.0t−9.0  ⟹  3.0t−9.0=0  ⟹  t=3.0 sv(t) = 1.5t^2 - 9.0t + 12 \implies a(t) = 3.0t - 9.0 \implies 3.0t - 9.0 = 0 \implies t = 3.0\text{ s}

  2. Step 2

    v(3.0)=1.5(3.0)2−9.0(3.0)+12=−1.5 m/sv(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 = -1.5\text{ m/s}

  3. Step 3

    x(1.0)=8.0 m  ⟹  x(5.0)=10.0 m  ⟹  aavg=x(5.0)−x(1.0)(5.0−1.0)2x(1.0) = 8.0\text{ m} \implies x(5.0) = 10.0\text{ m} \implies a_{\text{avg}} = \frac{x(5.0) - x(1.0)}{(5.0 - 1.0)^2}

    Correct

    aavg=v(5.0)−v(1.0)5.0−1.0a_{\text{avg}} = \frac{v(5.0) - v(1.0)}{5.0 - 1.0}

    You defined average acceleration as displacement divided by elapsed time squared, Δx(Δt)2\frac{\Delta x}{(\Delta t)^2}. By definition, average acceleration is the change in velocity divided by elapsed time, aavg=ΔvΔta_{\text{avg}} = \frac{\Delta v}{\Delta t}.

  4. Step 4

    aavg=10.0−8.016.0=0.125 m/s2a_{\text{avg}} = \frac{10.0 - 8.0}{16.0} = 0.125\text{ m/s}^2

    Correct

    aavg=4.5 m/s−4.5 m/s4.0 s=0 m/s2a_{\text{avg}} = \frac{4.5\text{ m/s} - 4.5\text{ m/s}}{4.0\text{ s}} = 0\text{ m/s}^2

    This result follows directly from using the incorrect formula relating position and time squared rather than change in velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the position function twice to obtain the velocity and acceleration functions.

You accurately solved for the time when acceleration is zero and calculated the instantaneous velocity at that instant.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misapplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the fundamental definition of average acceleration (aavg=ΔvΔta_{\text{avg}} = \frac{\Delta v}{\Delta t}) with an expression derived from constant-acceleration displacement formulas (like Δx=12at2\Delta x = \frac{1}{2}at^2), leading you to evaluate position values rather than velocity values.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Average Acceleration
  • aavg=ΔvΔt=v(t2)−v(t1)t2−t1a_{\text{avg}} = \frac{\Delta v}{\Delta t} = \frac{v(t_2) - v(t_1)}{t_2 - t_1} for any motion.

  • Always find the velocity values at the start and end of the interval before computing average acceleration.

Avoid Applying Constant-Acceleration Formulas to Variable Acceleration
  • Equations like Δx=12at2\Delta x = \frac{1}{2}at^2 are only valid when acceleration is strictly constant and v0=0v_0 = 0.

  • Check if acceleration varies with time (a(t)=3.0t−9.0a(t) = 3.0t - 9.0 is non-constant), and rely directly on calculus and primary definitions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate velocity at t=1.0 st = 1.0\text{ s}: v(1.0)=1.5(1.0)2−9.0(1.0)+12=4.5 m/sv(1.0) = 1.5(1.0)^2 - 9.0(1.0) + 12 = 4.5\text{ m/s}.

  2. Evaluate velocity at t=5.0 st = 5.0\text{ s}: v(5.0)=1.5(5.0)2−9.0(5.0)+12=37.5−45.0+12=4.5 m/sv(5.0) = 1.5(5.0)^2 - 9.0(5.0) + 12 = 37.5 - 45.0 + 12 = 4.5\text{ m/s}.

  3. Apply the average acceleration formula: aavg=v(5.0)−v(1.0)5.0−1.0=4.5−4.54.0=0 m/s2a_{\text{avg}} = \frac{v(5.0) - v(1.0)}{5.0 - 1.0} = \frac{4.5 - 4.5}{4.0} = 0\text{ m/s}^2.

Final answer

(a) v=−1.5 m/sv = -1.5\text{ m/s}; (b) aavg=0 m/s2a_{\text{avg}} = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between vavg=ΔxΔtv_{\text{avg}} = \frac{\Delta x}{\Delta t} and aavg=ΔvΔta_{\text{avg}} = \frac{\Delta v}{\Delta t}.

  • Practice finding average quantities from given rate functions by calculating endpoint values rather than attempting dimensional combinations of position.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the power rule derivative for acceleration by taking a(t) = d²x/dt² = 1.5t - 9.0, leading to an incorrect time for zero acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=1.5t2−9.0t+12v(t) = 1.5t^2 - 9.0t + 12

  2. Step 2

    a(t)=1.5t−9.0a(t) = 1.5t - 9.0

    Correct

    a(t)=dvdt=2(1.5)t−9.0=3.0t−9.0a(t) = \frac{dv}{dt} = 2(1.5)t - 9.0 = 3.0t - 9.0

    When differentiating 1.5t21.5t^2, you did not multiply the coefficient 1.51.5 by the exponent 22, writing 1.5t1.5t instead of 3.0t3.0t.

  3. Step 3

    1.5t−9.0=0  ⟹  t=6.0 s1.5t - 9.0 = 0 \implies t = 6.0\text{ s}

    Correct

    3.0t−9.0=0  ⟹  t=3.0 s3.0t - 9.0 = 0 \implies t = 3.0\text{ s}

    Your algebra to solve for tt is consistent with your acceleration expression, but the value is affected by the derivative error in Step 2.

  4. Step 4

    v(6.0)=1.5(6.0)2−9.0(6.0)+12=12 m/sv(6.0) = 1.5(6.0)^2 - 9.0(6.0) + 12 = 12\text{ m/s}

    Correct

    v(3.0)=1.5(3.0)2−9.0(3.0)+12=−1.5 m/sv(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 = -1.5\text{ m/s}

    You accurately evaluated your velocity function at t=6.0 st = 6.0\text{ s}, but because the true moment of zero acceleration is t=3.0 st = 3.0\text{ s}, the resulting velocity is incorrect.

  5. Step 5

    aavg=v(5.0)−v(1.0)5.0−1.0  ⟹  v(5.0)=4.5 m/s, v(1.0)=4.5 m/s  ⟹  aavg=4.5−4.54.0=0 m/s2a_{\text{avg}} = \frac{v(5.0) - v(1.0)}{5.0 - 1.0} \implies v(5.0) = 4.5\text{ m/s},\, v(1.0) = 4.5\text{ m/s} \implies a_{\text{avg}} = \frac{4.5 - 4.5}{4.0} = 0\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly took the first derivative of position to obtain the velocity function.

You correctly recalled and applied the definition of average acceleration Δv/Δt\Delta v / \Delta t.

You accurately computed the function values for v(1.0)v(1.0) and v(5.0)v(5.0).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Power Rule Coefficient Multiplication

Leaving the coefficient unchanged when taking ddt(1.5t2)\frac{d}{dt}(1.5t^2) instead of multiplying 1.5×21.5 \times 2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked multiplying the pre-existing coefficient by the power nn when applying the power rule ddt(ctn)=c⋅ntn−1\frac{d}{dt}(c t^n) = c \cdot n t^{n-1}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiating Power Terms with Coefficients
  • ddt(ctn)=c⋅ntn−1\frac{d}{dt}(c t^n) = c \cdot n t^{n-1}

  • Write out the multiplication step explicitly, for example 2⋅(1.5)t2−1=3.0t2 \cdot (1.5) t^{2-1} = 3.0t, before simplifying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Differentiate v(t)=1.5t2−9.0t+12v(t) = 1.5t^2 - 9.0t + 12 to get a(t)=ddt(1.5t2−9.0t+12)=3.0t−9.0a(t) = \frac{d}{dt}(1.5t^2 - 9.0t + 12) = 3.0t - 9.0.

  2. Set a(t)=0a(t) = 0: 3.0t−9.0=0  ⟹  t=3.0 s3.0t - 9.0 = 0 \implies t = 3.0\text{ s}.

  3. Substitute t=3.0 st = 3.0\text{ s} into v(t)v(t): v(3.0)=1.5(3.0)2−9.0(3.0)+12=13.5−27.0+12=−1.5 m/sv(3.0) = 1.5(3.0)^2 - 9.0(3.0) + 12 = 13.5 - 27.0 + 12 = -1.5\text{ m/s}.

Final answer

(a) v=−1.5 m/sv = -1.5\text{ m/s}; (b) aavg=0 m/s2a_{\text{avg}} = 0\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the product n⋅cn \cdot c explicitly when taking successive derivatives of polynomial terms.

  • Perform a quick units and sanity check: when x(t)x(t) has leading term 0.5t30.5t^3, the second derivative coefficient must be 3×2×0.5=3.03 \times 2 \times 0.5 = 3.0.

Lock it in

Similar question

01

A particle moves along a straight line such that its position is x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t. Find the instantaneous velocity of the particle when its acceleration is zero.

Answer

v=−3v = -3. Key steps: v(t)=x′(t)=3t2−12t+9v(t) = x'(t) = 3t^2 - 12t + 9, a(t)=v′(t)=6t−12a(t) = v'(t) = 6t - 12. Set a(t)=0  ⟹  t=2 sa(t) = 0 \implies t = 2\text{ s}. Substitute into v(t)v(t): v(2)=3(4)−12(2)+9=−3 m/sv(2) = 3(4) - 12(2) + 9 = -3\text{ m/s}.

02

The velocity of a car moving along an axis is given by v(t)=2t3−15t2+24tv(t) = 2t^3 - 15t^2 + 24t for t≥0t \ge 0. Determine: (a) the times when the car is instantaneously at rest, and (b) the time when the car's acceleration is zero.

Answer

(a) t=1 st = 1\text{ s} and t=4 st = 4\text{ s}; (b) t=2.5 st = 2.5\text{ s}. Key steps: For rest, set v(t)=0  ⟹  t(2t2−15t+24)=0v(t) = 0 \implies t(2t^2 - 15t + 24) = 0 (positive non-zero roots give t=1,4t = 1, 4). For zero acceleration, set a(t)=v′(t)=6t2−30t+24=0  ⟹  t2−5t+4=0  ⟹  t=1 s,4 sa(t) = v'(t) = 6t^2 - 30t + 24 = 0 \implies t^2 - 5t + 4 = 0 \implies t = 1\text{ s}, 4\text{ s} is where acceleration is zero? Check: a(t)=6(t−1)(t−4)=0  ⟹  t=1 s,4 sa(t) = 6(t-1)(t-4) = 0 \implies t = 1\text{ s}, 4\text{ s}. (Notice here v(t)=t(2t2−15t+24)v(t) = t(2t^2 - 15t + 24), but setting a(t)=0a(t) = 0 directly solves v′(t)=0v'(t) = 0).

03

A drone's position is given by x(t)=14t4−2t3+4t2x(t) = \frac{1}{4}t^4 - 2t^3 + 4t^2. Find the average acceleration over the interval between the two times at which the instantaneous acceleration is zero.

Answer

aavg=−4 m/s2a_{\text{avg}} = -4\text{ m/s}^2. Key steps: v(t)=t3−6t2+8tv(t) = t^3 - 6t^2 + 8t, a(t)=3t2−12t+8a(t) = 3t^2 - 12t + 8. Set a(t)=0  ⟹  t1,t2=12±144−966=2±233a(t) = 0 \implies t_1, t_2 = \frac{12 \pm \sqrt{144 - 96}}{6} = 2 \pm \frac{2\sqrt{3}}{3}. Average acceleration aavg=v(t2)−v(t1)t2−t1a_{\text{avg}} = \frac{v(t_2) - v(t_1)}{t_2 - t_1}. Since a(t)a(t) is parabolic, integration or direct velocity evaluation yields aavg=1t2−t1∫t1t2a(t) dt=−4 m/s2a_{\text{avg}} = \frac{1}{t_2 - t_1}\int_{t_1}^{t_2} a(t)\,dt = -4\text{ m/s}^2.

Loading workspace…