Resources

A 4.00  μF4.00\;\mu\text{F} capacitor is charged to a potential difference of V0=100 VV_0 = 100\text{ V} using a DC voltage source, then disconnected completely. This charged capacitor is subsequently connected in parallel across an uncharged 6.00  μF6.00\;\mu\text{F} capacitor, allowing charge to redistribute until electrostatic equilibrium is achieved. Calculate the final equilibrium potential difference VfV_f across the combination, the total electrostatic energy lost during the redistribution process (ΔU=Ui−Uf\Delta U = U_i - U_f), and state the primary physical mechanism responsible for this missing energy.

Answer and steps

Final answer

Vf=40.0 VV_f = 40.0\text{ V}, ΔU=0.0120 J=12.0 mJ\Delta U = 0.0120\text{ J} = 12.0\text{ mJ} (dissipated as thermal heat in connecting wires and radiated electromagnetic waves)

Steps

01

Determine the Initial Charge on the First Capacitor

The charge stored on a capacitor with capacitance C1=4.00  μFC_1 = 4.00\;\mu\text{F} when charged to a potential difference V0=100 VV_0 = 100\text{ V} is given by:

Q0=C1V0Q_0 = C_1 V_0

Substituting the values:

Q0=(4.00×10−6 F)(100 V)=4.00×10−4 C=400  μCQ_0 = (4.00 \times 10^{-6}\text{ F})(100\text{ V}) = 4.00 \times 10^{-4}\text{ C} = 400\;\mu\text{C}

Because the capacitor is disconnected from the voltage source, this total charge is isolated and must be conserved.


02

Find the Final Potential Difference (VfV_f)

When C1C_1 is connected in parallel across the uncharged capacitor C2=6.00  μFC_2 = 6.00\;\mu\text{F}, charge flows between them until both capacitors reach the same common potential difference VfV_f.

For parallel capacitors, the equivalent capacitance is the sum of the individual capacitances:

Ceq=C1+C2=4.00  μF+6.00  μF=10.0  μFC_{\text{eq}} = C_1 + C_2 = 4.00\;\mu\text{F} + 6.00\;\mu\text{F} = 10.0\;\mu\text{F}

By the law of conservation of charge:

Qtotal=Q0=CeqVfQ_{\text{total}} = Q_0 = C_{\text{eq}} V_f

Solving for VfV_f:

Vf=Q0C1+C2=400  μC10.0  μF=40.0 VV_f = \frac{Q_0}{C_1 + C_2} = \frac{400\;\mu\text{C}}{10.0\;\mu\text{F}} = 40.0\text{ V}


03

Calculate the Initial and Final Electrostatic Potential Energies

The electrostatic potential energy UU stored in a capacitor can be calculated using U=12CV2U = \frac{1}{2}CV^2.

  1. Initial Stored Energy (UiU_i): Ui=12C1V02=12(4.00×10−6 F)(100 V)2=0.0200 J=20.0 mJU_i = \frac{1}{2} C_1 V_0^2 = \frac{1}{2} (4.00 \times 10^{-6}\text{ F})(100\text{ V})^2 = 0.0200\text{ J} = 20.0\text{ mJ}
  2. Final Stored Energy (UfU_f): Uf=12CeqVf2=12(10.0×10−6 F)(40.0 V)2=0.0080 J=8.0 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2} (10.0 \times 10^{-6}\text{ F})(40.0\text{ V})^2 = 0.0080\text{ J} = 8.0\text{ mJ}

04

Calculate the Energy Lost (ΔU\Delta U) and Identify the Mechanism

The energy lost during the redistribution is the difference between initial and final electrostatic energies:

ΔU=Ui−Uf=0.0200 J−0.0080 J=0.0120 J=12.0 mJ\Delta U = U_i - U_f = 0.0200\text{ J} - 0.0080\text{ J} = 0.0120\text{ J} = 12.0\text{ mJ}

Physical Mechanism for Energy Loss:

  • In any real physical circuit, the connecting wires possess a non-zero electrical resistance. During charge redistribution, the transient current flowing through the circuit dissipates energy as Joule heating (thermal energy): ΔU=∫I2R dt\Delta U = \int I^2 R \, dt
  • Even in an idealized circuit with zero wire resistance (R→0R \to 0), the transient surge and oscillation of charge produce accelerating electric charges that dissipate the exact same amount of energy in the form of electromagnetic radiation.

Therefore, the missing electrostatic energy is converted into thermal heat in the connecting wires and emitted electromagnetic radiation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the series capacitance formula instead of the parallel formula when combining capacitors, resulting in an incorrect equivalent capacitance and final voltage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Qtotal=C1⋅V0=4.00  μF⋅100 V=400  μCQ_{\text{total}} = C_1 \cdot V_0 = 4.00\;\mu\text{F} \cdot 100\text{ V} = 400\;\mu\text{C}

  2. Step 2

    1Ceq=14.00  μF+16.00  μF=512  μF−1  ⟹  Ceq=2.40  μF\frac{1}{C_{\text{eq}}} = \frac{1}{4.00\;\mu\text{F}} + \frac{1}{6.00\;\mu\text{F}} = \frac{5}{12}\;\mu\text{F}^{-1} \implies C_{\text{eq}} = 2.40\;\mu\text{F}

    Correct

    Ceq=C1+C2=4.00  μF+6.00  μF=10.0  μFC_{\text{eq}} = C_1 + C_2 = 4.00\;\mu\text{F} + 6.00\;\mu\text{F} = 10.0\;\mu\text{F}

    The two capacitors are connected in parallel across each other, which means their capacitances add directly (Ceq=C1+C2C_{\text{eq}} = C_1 + C_2). You used the reciprocal formula, which applies only to capacitors in series.

  3. Step 3

    Vf=400  μC2.40  μF=166.7 VV_f = \frac{400\;\mu\text{C}}{2.40\;\mu\text{F}} = 166.7\text{ V}

    Correct

    Vf=Q0Ceq=400  μC10.0  μF=40.0 VV_f = \frac{Q_0}{C_{\text{eq}}} = \frac{400\;\mu\text{C}}{10.0\;\mu\text{F}} = 40.0\text{ V}

    Your relationship Vf=QCeqV_f = \frac{Q}{C_{\text{eq}}} is conceptually correct, but substituting your incorrect Ceq=2.40  μFC_{\text{eq}} = 2.40\;\mu\text{F} resulted in an incorrect voltage that unexpectedly exceeded the initial 100 V100\text{ V}.

  4. Step 4

    Ui=12⋅4.00  μF⋅(100 V)2=20.0 mJ  ⟹  Uf=12⋅2.40  μF⋅(166.7 V)2=33.3 mJ  ⟹  ΔU=20.0 mJ−33.3 mJ=−13.3 mJU_i = \frac{1}{2} \cdot 4.00\;\mu\text{F} \cdot (100\text{ V})^2 = 20.0\text{ mJ} \implies U_f = \frac{1}{2} \cdot 2.40\;\mu\text{F} \cdot (166.7\text{ V})^2 = 33.3\text{ mJ} \implies \Delta U = 20.0\text{ mJ} - 33.3\text{ mJ} = -13.3\text{ mJ}

    Correct

    Ui=20.0 mJU_i = 20.0\text{ mJ}, Uf=12(10.0  μF)(40.0 V)2=8.0 mJ  ⟹  ΔU=Ui−Uf=12.0 mJU_f = \frac{1}{2} (10.0\;\mu\text{F})(40.0\text{ V})^2 = 8.0\text{ mJ} \implies \Delta U = U_i - U_f = 12.0\text{ mJ}

    You calculated UiU_i correctly and applied the energy formula properly, but the propagated error from CeqC_{\text{eq}} and VfV_f produced a final energy larger than the initial energy, leading to an impossible negative energy loss in a passive circuit.

  5. Step 5

    Joule heating through the resistance of the wires and electromagnetic radiation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial stored charge using Q=C1V0Q = C_1 V_0.

You correctly calculated the initial electrostatic energy Ui=12C1V02U_i = \frac{1}{2}C_1 V_0^2.

You identified the correct physical mechanisms (thermal dissipation via Joule heating and electromagnetic radiation).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parallel vs. Series Capacitance Confusion

You accidentally wrote down the reciprocal sum formula for capacitors instead of adding their capacitances directly.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the combination rules for capacitors with those for resistors. When capacitors share common nodes on both plates, they share the same potential difference and connect in parallel, so their capacitances add directly (Ceq=C1+C2C_{\text{eq}} = C_1 + C_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check Voltage and Energy in Passive Redistribution
  • Connecting a charged capacitor across an uncharged capacitor without a battery cannot increase the system voltage above V0V_0 or increase the total electrostatic energy.

  • Whenever you calculate Vf>V0V_f > V_0 or ΔU<0\Delta U < 0 for a passive discharging network, immediately re-check your equivalent capacitance formula.

Capacitor vs. Resistor Combination Rules
  • Capacitors in parallel share voltage and add directly: Cp=C1+C2C_p = C_1 + C_2. Capacitors in series share charge and add reciprocally: 1Cs=1C1+1C2\frac{1}{C_s} = \frac{1}{C_1} + \frac{1}{C_2}.

  • Picture parallel plates combining their surface areas (Atotal=A1+A2A_{\text{total}} = A_1 + A_2), which increases total capacitance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the correct parallel equivalent capacitance: Ceq=C1+C2=4.00  μF+6.00  μF=10.0  μFC_{\text{eq}} = C_1 + C_2 = 4.00\;\mu\text{F} + 6.00\;\mu\text{F} = 10.0\;\mu\text{F}.

  2. Determine the equilibrium potential difference using charge conservation: Vf=Q0Ceq=400  μC10.0  μF=40.0 VV_f = \frac{Q_0}{C_{\text{eq}}} = \frac{400\;\mu\text{C}}{10.0\;\mu\text{F}} = 40.0\text{ V}.

  3. Calculate the final stored electrostatic energy: Uf=12CeqVf2=12(10.0×10−6 F)(40.0 V)2=8.00×10−3 J=8.00 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2}(10.0 \times 10^{-6}\text{ F})(40.0\text{ V})^2 = 8.00 \times 10^{-3}\text{ J} = 8.00\text{ mJ}.

  4. Calculate the lost energy: ΔU=Ui−Uf=20.0 mJ−8.00 mJ=12.0 mJ\Delta U = U_i - U_f = 20.0\text{ mJ} - 8.00\text{ mJ} = 12.0\text{ mJ}.

Final answer

Vf=40.0 VV_f = 40.0\text{ V}, ΔU=12.0 mJ\Delta U = 12.0\text{ mJ} (dissipated as Joule heating in the connecting wires and radiated electromagnetic waves)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical derivation of parallel capacitors (Qtotal=Q1+Q2Q_{\text{total}} = Q_1 + Q_2 with common VV) to reinforce why capacitances add directly.

  • Perform a physical sanity check on passive circuits: verify that Vf≤V0V_f \le V_0 and Uf≤UiU_f \le U_i.

  • Complete the follow-up practice exercises to master charge redistribution across multiple capacitors.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly assumes electrostatic energy is conserved during redistribution instead of charge, calculating the final potential from energy conservation and falsely finding zero energy lost.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ui=12⋅4.00  μF⋅(100 V)2=20.0 mJU_i = \frac{1}{2} \cdot 4.00\;\mu\text{F} \cdot (100\text{ V})^2 = 20.0\text{ mJ}

  2. Step 2

    Ceq=4.00  μF+6.00  μF=10.00  μFC_{\text{eq}} = 4.00\;\mu\text{F} + 6.00\;\mu\text{F} = 10.00\;\mu\text{F}

  3. Step 3

    Ui=Uf  ⟹  12⋅Ceq⋅Vf2=20.0 mJ  ⟹  Vf2=2⋅0.0200 J/(10.00×10−6 F)=4000 V2  ⟹  Vf=4000=63.2 VU_i = U_f \implies \frac{1}{2} \cdot C_{\text{eq}} \cdot V_f^2 = 20.0\text{ mJ} \implies V_f^2 = 2 \cdot 0.0200\text{ J} / (10.00 \times 10^{-6}\text{ F}) = 4000\text{ V}^2 \implies V_f = \sqrt{4000} = 63.2\text{ V}

    Correct

    Q0=C1V0=400  μC  ⟹  Vf=Q0Ceq=400  μC10.0  μF=40.0 VQ_0 = C_1 V_0 = 400\;\mu\text{C} \implies V_f = \frac{Q_0}{C_{\text{eq}}} = \frac{400\;\mu\text{C}}{10.0\;\mu\text{F}} = 40.0\text{ V}

    You set Ui=UfU_i = U_f, assuming electrostatic energy is conserved. Because the circuit is disconnected from the voltage source, it is electric charge QQ that is conserved, not electrostatic energy. Moving charges create currents that dissipate energy, so equating initial and final energies gives an incorrect equilibrium potential.

  4. Step 4

    Ui=20.0 mJ  ⟹  Uf=12⋅10.00  μF⋅(63.2 V)2=20.0 mJ  ⟹  ΔU=Ui−Uf=0.0 mJU_i = 20.0\text{ mJ} \implies U_f = \frac{1}{2} \cdot 10.00\;\mu\text{F} \cdot (63.2\text{ V})^2 = 20.0\text{ mJ} \implies \Delta U = U_i - U_f = 0.0\text{ mJ}

    Correct

    Uf=12CeqVf2=12(10.0  μF)(40.0 V)2=8.0 mJ  ⟹  ΔU=20.0 mJ−8.0 mJ=12.0 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2}(10.0\;\mu\text{F})(40.0\text{ V})^2 = 8.0\text{ mJ} \implies \Delta U = 20.0\text{ mJ} - 8.0\text{ mJ} = 12.0\text{ mJ}

    Because this calculation directly follows from your assumption that Ui=UfU_i = U_f, the resulting energy loss of 0.0 mJ0.0\text{ mJ} is incorrect.

  5. Step 5

    No energy is lost because total energy is conserved.

    Correct

    The missing electrostatic energy (12.0 mJ12.0\text{ mJ}) is dissipated as thermal Joule heating in the connecting wires and emitted as electromagnetic radiation during the transient charge flow.

    While total energy in the universe is conserved, electrostatic potential energy alone is not conserved in this subsystem. Transient currents dissipate energy as heat in the circuit wires and radiate electromagnetic waves.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial electrostatic potential energy stored in the charged capacitor.

You correctly added parallel capacitances to find the equivalent capacitance of the combined system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conservation of Energy vs. Conservation of Charge Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that electrostatic potential energy in a capacitor circuit is conserved during charge redistribution, confusing the universal conservation of total energy with subsystem electrostatic energy. In an isolated capacitive circuit, electric charge is strictly conserved (Q1+Q2=QtotalQ_1 + Q_2 = Q_{\text{total}}), but electrostatic energy must decrease because current flowing between capacitors inevitably dissipates energy as Joule heat and electromagnetic radiation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Conserve Charge, Not Electrostatic Energy
  • When an isolated capacitor is connected to another capacitor, charge is conserved (Qtotal=∑CiViQ_{\text{total}} = \sum C_i V_i), while electrostatic energy is dissipated: ΔU=Ui−Uf>0\Delta U = U_i - U_f > 0.

  • Always set Qtotal=CeqVfQ_{\text{total}} = C_{\text{eq}} V_f to solve for the final potential difference, and then compute ΔU=Ui−Uf\Delta U = U_i - U_f.

Identify Dissipation Mechanisms
  • Any transient current I(t)I(t) flowing across resistance RR dissipates energy as heat ∫I2R dt\int I^2 R \, dt, and accelerating charges radiate electromagnetic waves.

  • State that lost electrostatic energy transforms into thermal energy in wires and radiated electromagnetic waves.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the conserved total initial charge: Q0=C1V0=(4.00  μF)(100 V)=400  μCQ_0 = C_1 V_0 = (4.00\;\mu\text{F})(100\text{ V}) = 400\;\mu\text{C}.

  2. Calculate the equilibrium potential difference using charge conservation: Vf=Q0Ceq=400  μC10.0  μF=40.0 VV_f = \frac{Q_0}{C_{\text{eq}}} = \frac{400\;\mu\text{C}}{10.0\;\mu\text{F}} = 40.0\text{ V}.

  3. Calculate the final stored electrostatic energy: Uf=12CeqVf2=12(10.0×10−6 F)(40.0 V)2=0.0080 J=8.0 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2}(10.0\times 10^{-6}\text{ F})(40.0\text{ V})^2 = 0.0080\text{ J} = 8.0\text{ mJ}.

  4. Compute the lost electrostatic energy: ΔU=Ui−Uf=20.0 mJ−8.0 mJ=12.0 mJ\Delta U = U_i - U_f = 20.0\text{ mJ} - 8.0\text{ mJ} = 12.0\text{ mJ}.

Final answer

Vf=40.0 VV_f = 40.0\text{ V}, ΔU=12.0 mJ\Delta U = 12.0\text{ mJ} (dissipated as thermal heat in connecting wires and radiated electromagnetic waves)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the principle of charge conservation in isolated capacitive systems.

  • Practice computing equilibrium voltage using Vf=QtotalCeqV_f = \frac{Q_{\text{total}}}{C_{\text{eq}}} before calculating energies.

  • Remember that electrostatic potential energy is generally not conserved during passive charge redistribution.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the potential difference in the capacitor energy formula, leading to an incorrect calculation of both initial and final electrostatic energies.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Qtotal=C1∗V0=4.00  μF∗100 V=400  μC  ⟹  Ceq=4.00  μF+6.00  μF=10.00  μF  ⟹  Vf=QtotalCeq=400  μC10.00  μF=40.0 VQ_{\text{total}} = C_1 * V_0 = 4.00\;\mu\text{F} * 100\text{ V} = 400\;\mu\text{C} \implies C_{\text{eq}} = 4.00\;\mu\text{F} + 6.00\;\mu\text{F} = 10.00\;\mu\text{F} \implies V_f = \frac{Q_{\text{total}}}{C_{\text{eq}}} = \frac{400\;\mu\text{C}}{10.00\;\mu\text{F}} = 40.0\text{ V}

  2. Step 2

    Ui=(12)∗C1∗V0=(12)∗(4.00∗10−6 F)∗(100 V)=0.00020 J=0.20 mJU_i = (\frac{1}{2}) * C_1 * V_0 = (\frac{1}{2}) * (4.00 * 10^{-6}\text{ F}) * (100\text{ V}) = 0.00020\text{ J} = 0.20\text{ mJ}

    Correct

    Ui=12C1V02=12(4.00×10−6 F)(100 V)2=0.0200 J=20.0 mJU_i = \frac{1}{2} C_1 V_0^2 = \frac{1}{2}(4.00\times 10^{-6}\text{ F})(100\text{ V})^2 = 0.0200\text{ J} = 20.0\text{ mJ}

    You wrote the energy formula as 12CV\frac{1}{2} C V instead of squaring the voltage (U=12CV2U = \frac{1}{2} C V^2). Notice dimensionally that CVC V equals charge QQ, not energy.

  3. Step 3

    Uf=(12)∗Ceq∗Vf=(12)∗(10.00∗10−6 F)∗(40.0 V)=0.00020 J=0.20 mJU_f = (\frac{1}{2}) * C_{\text{eq}} * V_f = (\frac{1}{2}) * (10.00 * 10^{-6}\text{ F}) * (40.0\text{ V}) = 0.00020\text{ J} = 0.20\text{ mJ}

    Correct

    Uf=12CeqVf2=12(10.0×10−6 F)(40.0 V)2=0.0080 J=8.0 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2}(10.0\times 10^{-6}\text{ F})(40.0\text{ V})^2 = 0.0080\text{ J} = 8.0\text{ mJ}

    You repeated the formula mistake by omitting the exponent on VfV_f. Because CeqVf=Qtotal=C1V0C_{\text{eq}} V_f = Q_{\text{total}} = C_1 V_0, using 12CV=12Q\frac{1}{2} C V = \frac{1}{2} Q made both UiU_i and UfU_f appear identical.

  4. Step 4

    ΔU=0.20 mJ−0.20 mJ=0.00 mJ\Delta U = 0.20\text{ mJ} - 0.20\text{ mJ} = 0.00\text{ mJ}

    Correct

    ΔU=Ui−Uf=20.0 mJ−8.0 mJ=12.0 mJ=0.0120 J\Delta U = U_i - U_f = 20.0\text{ mJ} - 8.0\text{ mJ} = 12.0\text{ mJ} = 0.0120\text{ J}

    Because of the missing squared term in both energy expressions, your calculated energy difference evaluated to zero instead of the actual lost energy.

  5. Step 5

    Heat dissipated in the connecting wires due to finite resistance and radiation.\text{Heat dissipated in the connecting wires due to finite resistance and radiation.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly conserved total charge across the parallel combination.

You calculated the equivalent capacitance and the final equilibrium voltage with perfect precision.

You correctly identified Joule heating in the wires and electromagnetic radiation as the physical dissipation mechanisms.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Recall Error: Missing Exponent in Potential Energy Formula

You wrote U=12CVU = \frac{1}{2}CV rather than squaring the voltage term VV.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the potential energy formula U=12CV2U = \frac{1}{2} C V^2 with 12QV\frac{1}{2} Q V, inadvertently omitting the second factor of VV when writing the expression in terms of capacitance and voltage. Since 12CV=12Q\frac{1}{2} C V = \frac{1}{2} Q and total charge is conserved, this made the initial and final energies appear falsely identical.

REASONING PATH
Your ACEpath teacher’s suggested approach
Capacitor Energy Formulations
  • The electrostatic energy stored in a capacitor can be written in three equivalent forms: U=12CV2=12QV=Q22CU = \frac{1}{2} C V^2 = \frac{1}{2} Q V = \frac{Q^2}{2C}.

  • Whenever working with CC and VV, check that the voltage is squared (V2V^2), or use U=Q22CU = \frac{Q^2}{2C} directly when total charge is conserved.

Dimensional Sanity Check
  • The product C⋅VC \cdot V has units of coulombs (C\text{C}), representing electric charge, not joules (J\text{J}). Energy requires C⋅V2C \cdot V^2 or Q⋅VQ \cdot V.

  • Verify that the units inside your formula evaluate to joules before proceeding to numerical substitution.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the initial stored energy: Ui=12C1V02=12(4.00×10−6 F)(100 V)2=0.0200 J=20.0 mJU_i = \frac{1}{2} C_1 V_0^2 = \frac{1}{2} (4.00\times 10^{-6}\text{ F})(100\text{ V})^2 = 0.0200\text{ J} = 20.0\text{ mJ}.

  2. Recalculate the final stored energy: Uf=12CeqVf2=12(10.0×10−6 F)(40.0 V)2=0.0080 J=8.0 mJU_f = \frac{1}{2} C_{\text{eq}} V_f^2 = \frac{1}{2} (10.0\times 10^{-6}\text{ F})(40.0\text{ V})^2 = 0.0080\text{ J} = 8.0\text{ mJ}.

  3. Subtract final energy from initial energy: ΔU=Ui−Uf=20.0 mJ−8.0 mJ=12.0 mJ\Delta U = U_i - U_f = 20.0\text{ mJ} - 8.0\text{ mJ} = 12.0\text{ mJ}.

Final answer

Vf=40.0 VV_f = 40.0\text{ V}, ΔU=0.0120 J=12.0 mJ\Delta U = 0.0120\text{ J} = 12.0\text{ mJ} (dissipated as heat in connecting wires and radiated electromagnetic waves)

NEXT STEPS
Final Takeaways from Your Teacher
  • Recompute UiU_i and UfU_f using U=12CV2U = \frac{1}{2} C V^2 to obtain the correct energy values.

  • Practice checking the physical dimensions of energy formulas ([C][V2]=J[C][V^2] = \text{J}) to catch missing exponents early.

  • Try using U=Q22CU = \frac{Q^2}{2C} when solving charge-sharing problems, as the charge remains constant.

Lock it in

Similar question

01

A 3.00  μF3.00\;\mu\text{F} capacitor is charged to 60.0 V60.0\text{ V} and then disconnected from the source. It is then connected in parallel with an uncharged 2.00  μF2.00\;\mu\text{F} capacitor. Calculate the final potential difference VfV_f and the energy lost during redistribution ΔU\Delta U.

Answer

Vf=36.0 VV_f = 36.0\text{ V}, ΔU=2.16 mJ\Delta U = 2.16\text{ mJ}. Key steps: Q0=(3.00  μF)(60.0 V)=180  μCQ_0 = (3.00\;\mu\text{F})(60.0\text{ V}) = 180\;\mu\text{C}. In parallel, Ceq=3.00+2.00=5.00  μFC_{\text{eq}} = 3.00 + 2.00 = 5.00\;\mu\text{F}. Vf=180  μC5.00  μF=36.0 VV_f = \frac{180\;\mu\text{C}}{5.00\;\mu\text{F}} = 36.0\text{ V}. Ui=12(3.00  μF)(60.0 V)2=5.40 mJU_i = \frac{1}{2}(3.00\;\mu\text{F})(60.0\text{ V})^2 = 5.40\text{ mJ}. Uf=12(5.00  μF)(36.0 V)2=3.24 mJU_f = \frac{1}{2}(5.00\;\mu\text{F})(36.0\text{ V})^2 = 3.24\text{ mJ}. ΔU=5.40−3.24=2.16 mJ\Delta U = 5.40 - 3.24 = 2.16\text{ mJ}.

02

A 5.00  μF5.00\;\mu\text{F} capacitor charged to 120 V120\text{ V} is connected in parallel with a 10.0  μF10.0\;\mu\text{F} capacitor that is already charged to 30.0 V30.0\text{ V}, with like-polarity terminals connected together. Find the final common potential difference across the capacitors and the total energy dissipated.

Answer

Vf=60.0 VV_f = 60.0\text{ V}, ΔU=15.0 mJ\Delta U = 15.0\text{ mJ}. Key steps: Q1=(5.00)(120)=600  μCQ_1 = (5.00)(120) = 600\;\mu\text{C}, Q2=(10.0)(30.0)=300  μCQ_2 = (10.0)(30.0) = 300\;\mu\text{C}. Total charge Q=600+300=900  μCQ = 600 + 300 = 900\;\mu\text{C}. Ceq=5.00+10.0=15.0  μFC_{\text{eq}} = 5.00 + 10.0 = 15.0\;\mu\text{F}. Vf=900  μC15.0  μF=60.0 VV_f = \frac{900\;\mu\text{C}}{15.0\;\mu\text{F}} = 60.0\text{ V}. Ui=12(5.00)(120)2+12(10.0)(30.0)2=36.0 mJ+4.50 mJ=40.5 mJU_i = \frac{1}{2}(5.00)(120)^2 + \frac{1}{2}(10.0)(30.0)^2 = 36.0\text{ mJ} + 4.50\text{ mJ} = 40.5\text{ mJ}. Uf=12(15.0)(60.0)2=27.0 mJU_f = \frac{1}{2}(15.0)(60.0)^2 = 27.0\text{ mJ}. ΔU=40.5−27.0=15.0 mJ\Delta U = 40.5 - 27.0 = 15.0\text{ mJ}.

03

A capacitor of capacitance C1C_1 charged to voltage V0V_0 is connected in parallel to an uncharged capacitor C2C_2. Derive a general algebraic formula for the fraction of initial energy lost, ΔUUi\frac{\Delta U}{U_i}, in terms of C1C_1 and C2C_2.

Answer

ΔUUi=C2C1+C2\frac{\Delta U}{U_i} = \frac{C_2}{C_1 + C_2}. Key steps: Ui=Q022C1U_i = \frac{Q_0^2}{2C_1}. After connection, Q0Q_0 is conserved on Ceq=C1+C2C_{\text{eq}} = C_1 + C_2, so Uf=Q022(C1+C2)U_f = \frac{Q_0^2}{2(C_1 + C_2)}. The ratio of remaining energy is UfUi=C1C1+C2\frac{U_f}{U_i} = \frac{C_1}{C_1 + C_2}. Therefore, the fractional energy lost is ΔUUi=1−UfUi=1−C1C1+C2=C2C1+C2\frac{\Delta U}{U_i} = 1 - \frac{U_f}{U_i} = 1 - \frac{C_1}{C_1 + C_2} = \frac{C_2}{C_1 + C_2}.

Loading workspace…