Resources

A toy locomotive of mass m1=350 gm_1 = 350\text{ g} travels along a straight track at v1i=72.0 cm/sv_{1i} = 72.0\text{ cm/s}. It collides head-on and couples in a completely inelastic collision with a stationary freight car of mass m2=5.50×105 mgm_2 = 5.50 \times 10^5\text{ mg}. Convert all quantities to standard SI units and calculate: (a) the final speed vfv_f of the coupled train cars in m/s\text{m/s}, and (b) the total kinetic energy converted into thermal/deformation energy during the collision in millijoules (mJ\text{mJ}).

Answer and steps

Final answer

(a) vf=0.280 m/sv_f = 0.280\text{ m/s}; (b) ΔEdissipated=55.4 mJ\Delta E_{\text{dissipated}} = 55.4\text{ mJ}

Steps

01

Convert all given quantities to SI units

Before applying physical laws, convert the mass and velocity values into kilograms (kg\text{kg}) and meters per second (m/s\text{m/s}):

  • Locomotive mass (m1m_1): m1=350 g=350×10−3 kg=0.350 kgm_1 = 350\text{ g} = 350 \times 10^{-3}\text{ kg} = 0.350\text{ kg}
  • Locomotive initial velocity (v1iv_{1i}): v1i=72.0 cm/s=72.0100 m/s=0.720 m/sv_{1i} = 72.0\text{ cm/s} = \frac{72.0}{100}\text{ m/s} = 0.720\text{ m/s}
  • Freight car mass (m2m_2): Since 1 mg=10−6 kg1\text{ mg} = 10^{-6}\text{ kg}: m2=5.50×105 mg=5.50×105×10−6 kg=0.550 kgm_2 = 5.50 \times 10^5\text{ mg} = 5.50 \times 10^5 \times 10^{-6}\text{ kg} = 0.550\text{ kg}
  • Freight car initial velocity (v2iv_{2i}): v2i=0 m/sv_{2i} = 0\text{ m/s}

02

Determine the final velocity vfv_f (Part a)

Because the track is horizontal and friction is neglected during the brief collision, the net external force on the two-car system along the track is zero. Therefore, total linear momentum is conserved:

pinitial=pfinalp_{\text{initial}} = p_{\text{final}}

In a completely inelastic collision, the two bodies stick (couple) together and move with a shared final velocity vfv_f:

m1v1i+m2v2i=(m1+m2)vfm_1 v_{1i} + m_2 v_{2i} = (m_1 + m_2)v_f

Substitute the known values into the equation:

(0.350 kg)(0.720 m/s)+(0.550 kg)(0 m/s)=(0.350 kg+0.550 kg)vf(0.350\text{ kg})(0.720\text{ m/s}) + (0.550\text{ kg})(0\text{ m/s}) = (0.350\text{ kg} + 0.550\text{ kg})v_f

0.252 kg⋅m/s=(0.900 kg)vf0.252\text{ kg}\cdot\text{m/s} = (0.900\text{ kg})v_f

Solve for vfv_f:

vf=0.2520.900=0.280 m/sv_f = \frac{0.252}{0.900} = 0.280\text{ m/s}


03

Calculate the kinetic energy dissipated (Part b)

A completely inelastic collision always results in the maximum possible loss of kinetic energy consistent with momentum conservation. This lost kinetic energy is transformed into thermal energy, sound, and permanent deformation:

ΔEdissipated=Ki−Kf\Delta E_{\text{dissipated}} = K_i - K_f

  1. Initial kinetic energy (KiK_i): Ki=12m1v1i2+12m2v2i2K_i = \frac{1}{2}m_1 v_{1i}^2 + \frac{1}{2}m_2 v_{2i}^2 Ki=12(0.350 kg)(0.720 m/s)2+0=0.09072 JK_i = \frac{1}{2}(0.350\text{ kg})(0.720\text{ m/s})^2 + 0 = 0.09072\text{ J}
  2. Final kinetic energy (KfK_f): Kf=12(m1+m2)vf2K_f = \frac{1}{2}(m_1 + m_2)v_f^2 Kf=12(0.900 kg)(0.280 m/s)2=12(0.900)(0.0784)=0.03528 JK_f = \frac{1}{2}(0.900\text{ kg})(0.280\text{ m/s})^2 = \frac{1}{2}(0.900)(0.0784) = 0.03528\text{ J}
  3. Energy converted: ΔEdissipated=0.09072 J−0.03528 J=0.05544 J\Delta E_{\text{dissipated}} = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J}

Convert this value to millijoules (1 J=1000 mJ1\text{ J} = 1000\text{ mJ}) and round to three significant figures:

ΔEdissipated=0.05544×1000 mJ≈55.4 mJ\Delta E_{\text{dissipated}} = 0.05544 \times 1000\text{ mJ} \approx 55.4\text{ mJ}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misconverts milligrams to kilograms by dividing by 10³ instead of 10⁶, taking m2 = 550 kg, which leads to an incorrectly tiny final velocity and distorted energy loss.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=0.350 kgm_1 = 0.350\text{ kg}, v1i=0.720 m/sv_{1i} = 0.720\text{ m/s}, m2=5.50×105 mg=550 kgm_2 = 5.50 \times 10^5\text{ mg} = 550\text{ kg}

    Correct

    m2=5.50×105 mg=5.50×105×10−6 kg=0.550 kgm_2 = 5.50 \times 10^5\text{ mg} = 5.50 \times 10^5 \times 10^{-6}\text{ kg} = 0.550\text{ kg}

    You converted m1m_1 and v1iv_{1i} correctly, but converted milligrams to kilograms incorrectly. Since 1 mg=10−3 g=10−6 kg1\text{ mg} = 10^{-3}\text{ g} = 10^{-6}\text{ kg}, 5.50×105 mg=0.550 kg5.50 \times 10^5\text{ mg} = 0.550\text{ kg}, not 550 kg550\text{ kg}.

  2. Step 2

    m1v1i=(m1+m2)vf  ⟹  0.350×0.720=(0.350+550)vf  ⟹  0.252=550.35vf  ⟹  vf=0.000458 m/sm_1 v_{1i} = (m_1 + m_2)v_f \implies 0.350 \times 0.720 = (0.350 + 550)v_f \implies 0.252 = 550.35 v_f \implies v_f = 0.000458\text{ m/s}

    Correct

    0.252=(0.350+0.550)vf  ⟹  vf=0.2520.900=0.280 m/s0.252 = (0.350 + 0.550)v_f \implies v_f = \frac{0.252}{0.900} = 0.280\text{ m/s}

    Your momentum conservation formula is completely sound. However, using m2=550 kgm_2 = 550\text{ kg} from Step 1 caused the final velocity to be off by several orders of magnitude.

  3. Step 3

    Ki=12(0.350)(0.720)2=0.09072 JK_i = \frac{1}{2}(0.350)(0.720)^2 = 0.09072\text{ J}, Kf=12(550.35)(0.000458)2=0.0000577 J  ⟹  ΔE=Ki−Kf=0.09066 J=90.7 mJK_f = \frac{1}{2}(550.35)(0.000458)^2 = 0.0000577\text{ J} \implies \Delta E = K_i - K_f = 0.09066\text{ J} = 90.7\text{ mJ}

    Correct

    Kf=12(0.900)(0.280)2=0.03528 J  ⟹  ΔE=0.09072 J−0.03528 J=0.05544 J≈55.4 mJK_f = \frac{1}{2}(0.900)(0.280)^2 = 0.03528\text{ J} \implies \Delta E = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J} \approx 55.4\text{ mJ}

    You correctly computed KiK_i and used the correct relationship ΔE=Ki−Kf\Delta E = K_i - K_f. Because of the propagated errors in m2m_2 and vfv_f, your values for KfK_f and ΔE\Delta E were inaccurate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted m1m_1 to kilograms and v1iv_{1i} to meters per second.

You correctly identified that linear momentum is conserved in a completely inelastic collision.

You correctly expressed kinetic energy loss as the difference between initial and final kinetic energies.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric Prefix Conversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You divided milligrams by 10310^3 instead of 10610^6 to convert to kilograms, effectively treating milligrams as grams (5.50×105 mg=550 g5.50 \times 10^5\text{ mg} = 550\text{ g}, but 550 g=0.550 kg550\text{ g} = 0.550\text{ kg}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Step SI Mass Conversion
  • To convert from milligrams (mg\text{mg}) to kilograms (kg\text{kg}), multiply by 10−610^{-6} (or divide by 10610^6), because 1 mg=10−3 g=10−6 kg1\text{ mg} = 10^{-3}\text{ g} = 10^{-6}\text{ kg}.

  • Always verify scientific notation conversions through the base gram unit: mg→÷103g→÷103kg\text{mg} \xrightarrow{\div 10^3} \text{g} \xrightarrow{\div 10^3} \text{kg}.

Order of Magnitude Sanity Check
  • In a toy train setup where one car is 350 g350\text{ g}, a freight car mass of 550 kg550\text{ kg} is physically unreasonable.

  • Check whether intermediate mass values align with the physical context of the problem before solving.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert freight car mass correctly: m2=5.50×105 mg=5.50×105×10−6 kg=0.550 kgm_2 = 5.50 \times 10^5\text{ mg} = 5.50 \times 10^5 \times 10^{-6}\text{ kg} = 0.550\text{ kg}.

  2. Apply momentum conservation: (0.350 kg)(0.720 m/s)=(0.350 kg+0.550 kg)vf  ⟹  0.252=0.900vf  ⟹  vf=0.280 m/s(0.350\text{ kg})(0.720\text{ m/s}) = (0.350\text{ kg} + 0.550\text{ kg})v_f \implies 0.252 = 0.900 v_f \implies v_f = 0.280\text{ m/s}.

  3. Calculate final kinetic energy: Kf=12(0.900 kg)(0.280 m/s)2=0.03528 JK_f = \frac{1}{2}(0.900\text{ kg})(0.280\text{ m/s})^2 = 0.03528\text{ J}.

  4. Determine energy converted to thermal/deformation: ΔE=0.09072 J−0.03528 J=0.05544 J=55.4 mJ\Delta E = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J} = 55.4\text{ mJ}.

Final answer

(a) vf=0.280 m/sv_f = 0.280\text{ m/s}; (b) ΔE=55.4 mJ\Delta E = 55.4\text{ mJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard metric SI prefixes from milli- (10−310^{-3}) to kilo- (10310^3).

  • Practice two-step unit conversions via base SI units before substituting into physical conservation laws.

  • Perform physical intuition checks on resulting masses and speeds to spot factor-of-1000 slips immediately.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the velocities in the kinetic energy formulas, calculating (1/2)*m*v instead of (1/2)*m*v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=0.350 kgm_1 = 0.350\text{ kg}, v1i=0.720 m/sv_{1i} = 0.720\text{ m/s}, m2=0.550 kgm_2 = 0.550\text{ kg}

  2. Step 2

    m1⋅v1i=(m1+m2)⋅vf  ⟹  0.350⋅0.720=(0.350+0.550)⋅vf  ⟹  0.252=0.900⋅vf  ⟹  vf=0.280 m/sm_1 \cdot v_{1i} = (m_1 + m_2) \cdot v_f \implies 0.350 \cdot 0.720 = (0.350 + 0.550) \cdot v_f \implies 0.252 = 0.900 \cdot v_f \implies v_f = 0.280\text{ m/s}

  3. Step 3

    Ki=12m1v1i=0.5⋅0.350⋅0.720=0.126 JK_i = \frac{1}{2} m_1 v_{1i} = 0.5 \cdot 0.350 \cdot 0.720 = 0.126\text{ J}, Kf=12(m1+m2)vf=0.5⋅0.900⋅0.280=0.126 JK_f = \frac{1}{2} (m_1 + m_2) v_f = 0.5 \cdot 0.900 \cdot 0.280 = 0.126\text{ J}

    Correct

    Ki=12m1v1i2=12(0.350)(0.720)2=0.09072 JK_i = \frac{1}{2} m_1 v_{1i}^2 = \frac{1}{2}(0.350)(0.720)^2 = 0.09072\text{ J}, Kf=12(m1+m2)vf2=12(0.900)(0.280)2=0.03528 JK_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.900)(0.280)^2 = 0.03528\text{ J}

    You omitted squaring the velocity terms in the kinetic energy formula, writing K=12mvK = \frac{1}{2}mv instead of K=12mv2K = \frac{1}{2}mv^2. Because linear momentum p=mvp = mv is conserved, computing 12mv\frac{1}{2}mv simply evaluated half of the momentum, producing identical initial and final values.

  4. Step 4

    ΔE=Ki−Kf=0.126 J−0.126 J=0 J  ⟹  ΔE=0 mJ\Delta E = K_i - K_f = 0.126\text{ J} - 0.126\text{ J} = 0\text{ J} \implies \Delta E = 0\text{ mJ}

    Correct

    ΔEdissipated=Ki−Kf=0.09072 J−0.03528 J=0.05544 J≈55.4 mJ\Delta E_{\text{dissipated}} = K_i - K_f = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J} \approx 55.4\text{ mJ}

    Because the kinetic energies were calculated without squared velocities, the subtraction resulted in 0 mJ0\text{ mJ} instead of the actual dissipated kinetic energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted grams, milligrams, and centimeters per second into standard SI units.

You set up the conservation of momentum equation accurately for a completely inelastic collision.

You accurately solved for the final coupled speed vf=0.280 m/sv_f = 0.280\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula transcription error (omitted velocity exponent)

You accidentally wrote the kinetic energy formula as K=12mvK = \frac{1}{2}mv instead of squaring velocity as K=12mv2K = \frac{1}{2}mv^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing kinetic energy K=12mv2K = \frac{1}{2}mv^2 with linear momentum scaled by half (12p=12mv\frac{1}{2}p = \frac{1}{2}mv), which mechanically forces initial and final values to match whenever momentum is conserved.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • Translational kinetic energy depends quadratically on speed: K=12mv2K = \frac{1}{2}mv^2.

  • Check units: kg⋅(m/s)2=kg⋅m2/s2=J\text{kg}\cdot(\text{m/s})^2 = \text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}. Writing mvmv yields kg⋅m/s\text{kg}\cdot\text{m/s}, which has units of momentum, not energy.

Completely Inelastic Collision Sanity Check
  • In any completely inelastic collision where bodies couple, mechanical kinetic energy must decrease (ΔEdissipated>0\Delta E_{\text{dissipated}} > 0).

  • If your calculated energy loss for two sticking bodies is zero, re-verify your kinetic energy expressions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate initial kinetic energy with squared velocity: Ki=12m1v1i2=12(0.350 kg)(0.720 m/s)2=0.09072 JK_i = \frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}(0.350\text{ kg})(0.720\text{ m/s})^2 = 0.09072\text{ J}.

  2. Calculate final kinetic energy of the coupled train: Kf=12(m1+m2)vf2=12(0.900 kg)(0.280 m/s)2=0.03528 JK_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.900\text{ kg})(0.280\text{ m/s})^2 = 0.03528\text{ J}.

  3. Find the dissipated energy: ΔEdissipated=Ki−Kf=0.09072 J−0.03528 J=0.05544 J\Delta E_{\text{dissipated}} = K_i - K_f = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J}.

  4. Convert joules to millijoules: 0.05544 J×1000 mJ/J≈55.4 mJ0.05544\text{ J} \times 1000\text{ mJ/J} \approx 55.4\text{ mJ}.

Final answer

(a) vf=0.280 m/sv_f = 0.280\text{ m/s}; (b) ΔEdissipated=55.4 mJ\Delta E_{\text{dissipated}} = 55.4\text{ mJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize and cross-verify dimensional units for momentum (p=mvp = mv, unit: kg⋅m/s\text{kg}\cdot\text{m/s}) versus kinetic energy (K=12mv2K = \frac{1}{2}mv^2, unit: J\text{J}).

  • Perform qualitative consistency checks: sticking collisions always lose kinetic energy to thermal energy and deformation.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets kinetic energy loss as (1/2)*(m1 + m2)*(v1i - vf)², evaluating the kinetic energy of the relative speed change rather than the difference between initial and final kinetic energies.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=0.350 kg  ⟹  v1i=0.720 m/s  ⟹  m2=0.550 kgm_1 = 0.350\text{ kg} \implies v_{1i} = 0.720\text{ m/s} \implies m_2 = 0.550\text{ kg}

  2. Step 2

    m1⋅v1i=(m1+m2)⋅vf  ⟹  0.350⋅0.720=0.900⋅vf  ⟹  vf=0.280 m/sm_1 \cdot v_{1i} = (m_1 + m_2) \cdot v_f \implies 0.350 \cdot 0.720 = 0.900 \cdot v_f \implies v_f = 0.280\text{ m/s}

  3. Step 3

    Δv=0.440 m/s  ⟹  ΔE=12(m1+m2)(Δv)2\Delta v = 0.440\text{ m/s} \implies \Delta E = \frac{1}{2}(m_1 + m_2)(\Delta v)^2

    Correct

    ΔEdissipated=Ki−Kf=12m1v1i2−12(m1+m2)vf2\Delta E_{\text{dissipated}} = K_i - K_f = \frac{1}{2}m_1 v_{1i}^2 - \frac{1}{2}(m_1 + m_2)v_f^2

    You calculated the change in velocity Δv=v1i−vf\Delta v = v_{1i} - v_f and substituted it into 12m(Δv)2\frac{1}{2}m(\Delta v)^2. Because kinetic energy depends on the square of velocity, the difference of squares (vi2−vf2)(v_i^2 - v_f^2) does not equal the square of the difference (vi−vf)2(v_i - v_f)^2.

  4. Step 4

    ΔE=0.5⋅0.900⋅(0.440)2=0.08712 J  ⟹  ΔE=87.12 mJ\Delta E = 0.5 \cdot 0.900 \cdot (0.440)^2 = 0.08712\text{ J} \implies \Delta E = 87.12\text{ mJ}

    Correct

    ΔEdissipated=0.09072 J−0.03528 J=0.05544 J≈55.4 mJ\Delta E_{\text{dissipated}} = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J} \approx 55.4\text{ mJ}

    Your arithmetic and conversion to millijoules follow your formula correctly, but the numerical result is inaccurate due to the formula error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted grams, milligrams, and centimeters per second into standard SI units.

You correctly identified that linear momentum is conserved during a completely inelastic collision.

You set up the coupled momentum equation properly and obtained the correct final speed vf=0.280 m/sv_f = 0.280\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinetic energy difference formula error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the difference between two kinetic energy states, ΔK=Ki−Kf=12mvi2−12mvf2\Delta K = K_i - K_f = \frac{1}{2}m v_i^2 - \frac{1}{2}m v_f^2, with the kinetic energy of the velocity change, 12m(vi−vf)2\frac{1}{2}m(v_i - v_f)^2. Algebraically, (a−b)2≠a2−b2(a - b)^2 \neq a^2 - b^2, so kinetic energy must always be calculated separately at each state before subtracting.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compute kinetic energy state by state
  • ΔK=∑Kinitial−∑Kfinal=(12m1v1i2+12m2v2i2)−12(m1+m2)vf2\Delta K = \sum K_{\text{initial}} - \sum K_{\text{final}} = \left(\frac{1}{2}m_1 v_{1i}^2 + \frac{1}{2}m_2 v_{2i}^2\right) - \frac{1}{2}(m_1 + m_2)v_f^2

  • Always evaluate total initial kinetic energy and total final kinetic energy as separate terms before finding their difference.

Avoid the difference-of-squares trap
  • (vi−vf)2=vi2−2vivf+vf2≠vi2−vf2(v_i - v_f)^2 = v_i^2 - 2v_i v_f + v_f^2 \neq v_i^2 - v_f^2

  • Never square a velocity difference Δv\Delta v when calculating energy changes unless you are working in a relative reference frame with reduced mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate initial kinetic energy: Ki=12m1v1i2=12(0.350 kg)(0.720 m/s)2=0.09072 JK_i = \frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}(0.350\text{ kg})(0.720\text{ m/s})^2 = 0.09072\text{ J}

  2. Calculate final kinetic energy: Kf=12(m1+m2)vf2=12(0.900 kg)(0.280 m/s)2=0.03528 JK_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.900\text{ kg})(0.280\text{ m/s})^2 = 0.03528\text{ J}

  3. Subtract final from initial: ΔEdissipated=Ki−Kf=0.09072 J−0.03528 J=0.05544 J\Delta E_{\text{dissipated}} = K_i - K_f = 0.09072\text{ J} - 0.03528\text{ J} = 0.05544\text{ J}

  4. Convert to millijoules: 0.05544 J×1000 mJ/J≈55.4 mJ0.05544\text{ J} \times 1000\text{ mJ/J} \approx 55.4\text{ mJ}

Final answer

(a) vf=0.280 m/sv_f = 0.280\text{ m/s}; (b) ΔEdissipated=55.4 mJ\Delta E_{\text{dissipated}} = 55.4\text{ mJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why kinetic energy is a scalar quantity dependent on speed squared rather than a linear function of Δv\Delta v.

  • Practice calculating energy changes by explicitly finding KbeforeK_{\text{before}} and KafterK_{\text{after}} in separate lines of work.

Lock it in

Similar question

01

A model cart of mass m1=200 gm_1 = 200\text{ g} moving at 1.50 m/s1.50\text{ m/s} collides with and couples to a resting car of mass m2=3.00×105 mgm_2 = 3.00 \times 10^5\text{ mg}. Find the final speed vfv_f of the coupled cars in m/s\text{m/s}.

Answer

vf=0.600 m/sv_f = 0.600\text{ m/s}. Convert m2=3.00×105×10−6 kg=0.300 kgm_2 = 3.00 \times 10^5 \times 10^{-6}\text{ kg} = 0.300\text{ kg} and m1=0.200 kgm_1 = 0.200\text{ kg}. By momentum conservation: (0.200)(1.50)=(0.200+0.300)vf  ⟹  0.300=0.500vf  ⟹  vf=0.600 m/s(0.200)(1.50) = (0.200 + 0.300)v_f \implies 0.300 = 0.500 v_f \implies v_f = 0.600\text{ m/s}.

02

A glider of mass m1=0.400 kgm_1 = 0.400\text{ kg} glides on an air track at 0.800 m/s0.800\text{ m/s} and sticks to a stationary glider of mass m2=6.00×105 mgm_2 = 6.00 \times 10^5\text{ mg}. Calculate the mechanical energy dissipated during the collision in millijoules (mJ\text{mJ}).

Answer

ΔE=76.8 mJ\Delta E = 76.8\text{ mJ}. Convert m2=0.600 kgm_2 = 0.600\text{ kg}. Total mass is 1.000 kg1.000\text{ kg}. Momentum gives vf=(0.400×0.800)/1.000=0.320 m/sv_f = (0.400 \times 0.800) / 1.000 = 0.320\text{ m/s}. Initial kinetic energy Ki=12(0.400)(0.800)2=0.1280 JK_i = \frac{1}{2}(0.400)(0.800)^2 = 0.1280\text{ J}. Final kinetic energy Kf=12(1.000)(0.320)2=0.0512 JK_f = \frac{1}{2}(1.000)(0.320)^2 = 0.0512\text{ J}. Dissipated energy ΔE=0.1280−0.0512=0.0768 J=76.8 mJ\Delta E = 0.1280 - 0.0512 = 0.0768\text{ J} = 76.8\text{ mJ}.

03

Two gliders on a horizontal frictionless track collide completely inelastically. Glider A (mA=1.20×105 mgm_A = 1.20 \times 10^5\text{ mg}) moves to the right at 0.500 m/s0.500\text{ m/s}, and Glider B (mB=80.0 gm_B = 80.0\text{ g}) moves to the left at 0.250 m/s0.250\text{ m/s}. Find (a) the velocity vfv_f of the joined gliders and (b) the fraction of initial kinetic energy lost in the collision.

Answer

(a) vf=+0.200 m/sv_f = +0.200\text{ m/s} (to the right); (b) 57.1%57.1\% lost. Convert: mA=0.120 kgm_A = 0.120\text{ kg}, mB=0.080 kgm_B = 0.080\text{ kg}. Initial momentum pi=(0.120)(0.500)+(0.080)(−0.250)=0.0600−0.0200=0.0400 kg⋅m/sp_i = (0.120)(0.500) + (0.080)(-0.250) = 0.0600 - 0.0200 = 0.0400\text{ kg}\cdot\text{m/s}. Total mass M=0.200 kgM = 0.200\text{ kg}. Final velocity vf=0.0400/0.200=0.200 m/sv_f = 0.0400 / 0.200 = 0.200\text{ m/s}. Initial energy Ki=12(0.120)(0.500)2+12(0.080)(0.250)2=0.0150+0.0025=0.0175 JK_i = \frac{1}{2}(0.120)(0.500)^2 + \frac{1}{2}(0.080)(0.250)^2 = 0.0150 + 0.0025 = 0.0175\text{ J}. Final energy Kf=12(0.200)(0.200)2=0.0040 JK_f = \frac{1}{2}(0.200)(0.200)^2 = 0.0040\text{ J}. Loss fraction =(0.0175−0.0040)/0.0175=0.0135/0.0175≈77.1%= (0.0175 - 0.0040) / 0.0175 = 0.0135 / 0.0175 \approx 77.1\% (or 2735≈77.1%\frac{27}{35} \approx 77.1\%).

Loading workspace…