Resources

An electric cart with a mass of m=250 kgm = 250\text{ kg} starts from rest at the origin (x=0.0 mx = 0.0\text{ m}) at t=0.0 st = 0.0\text{ s} and travels in a straight line on horizontal ground. The position-time graph of the cart reveals a quadratic curve x(t)=1.5t2x(t) = 1.5 t^2 (with xx in meters and tt in seconds) from t=0.0 st = 0.0\text{ s} to t=4.0 st = 4.0\text{ s}, followed by a linear segment from t=4.0 st = 4.0\text{ s} to t=9.0 st = 9.0\text{ s} that matches the slope at t=4.0 st = 4.0\text{ s}. (a) Using the slope and curvature of the position-time graph, determine the net force acting on the cart during the interval 0.0 s≤t≤4.0 s0.0\text{ s} \le t \le 4.0\text{ s}. (b) Using the work-energy theorem, calculate the total work done by the net force on the cart between t=0.0 st = 0.0\text{ s} and t=9.0 st = 9.0\text{ s}.

Answer and steps

Final answer

(a) Fnet=750 NF_{\text{net}} = 750\text{ N}; (b) Wnet=1.80×104 JW_{\text{net}} = 1.80 \times 10^4\text{ J}

Steps

Part (a): Determine the Net Force for 0.0 s≤t≤4.0 s0.0\text{ s} \le t \le 4.0\text{ s}

  1. Relate Position to Acceleration: On a position-time (xx-tt) graph, the slope represents the instantaneous velocity, and the curvature (the rate of change of the slope) represents the acceleration.

    For an object starting from rest (v0=0 m/sv_0 = 0\text{ m/s}) at the origin (x0=0.0 mx_0 = 0.0\text{ m}) under constant acceleration aa, the kinematic equation of motion is: x(t)=12at2x(t) = \frac{1}{2} a t^2

  2. Calculate the Acceleration: Comparing this relation to the given equation x(t)=1.5t2x(t) = 1.5 t^2: 12a=1.5 m/s2  ⟹  a=3.0 m/s2\frac{1}{2} a = 1.5\text{ m/s}^2 \implies a = 3.0\text{ m/s}^2 (Alternatively, taking the second derivative gives v(t)=dxdt=3.0tv(t) = \frac{dx}{dt} = 3.0t and a=dvdt=3.0 m/s2a = \frac{dv}{dt} = 3.0\text{ m/s}^2.)
  3. Apply Newton's Second Law: With mass m=250 kgm = 250\text{ kg}, the net force during this interval is: Fnet=ma=(250 kg)(3.0 m/s2)=750 NF_{\text{net}} = m a = (250\text{ kg})(3.0\text{ m/s}^2) = 750\text{ N}

Part (b): Calculate the Total Work Done Between t=0.0 st = 0.0\text{ s} and t=9.0 st = 9.0\text{ s}

  1. Determine the Velocity at Key Times:

    • At t=0.0 st = 0.0\text{ s}, the cart starts from rest: vi=0.0 m/sv_i = 0.0\text{ m/s}
    • At t=4.0 st = 4.0\text{ s}, the velocity is the slope of the quadratic curve: v(4.0)=3.0(4.0)=12 m/sv(4.0) = 3.0(4.0) = 12\text{ m/s}
    • For 4.0 s≤t≤9.0 s4.0\text{ s} \le t \le 9.0\text{ s}, the position graph is a linear segment matching this slope, meaning the velocity remains constant: vf=v(9.0)=12 m/sv_f = v(9.0) = 12\text{ m/s}
  2. Apply the Work-Energy Theorem: The total (net) work done on the cart equals its change in kinetic energy: Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2 Wnet=12(250 kg)(12 m/s)2−0=(125 kg)(144 m2/s2)=18000 J=1.80×104 JW_{\text{net}} = \frac{1}{2}(250\text{ kg})(12\text{ m/s})^2 - 0 = (125\text{ kg})(144\text{ m}^2/\text{s}^2) = 18000\text{ J} = 1.80 \times 10^4\text{ J}

(Note: During the linear segment from t=4.0 st = 4.0\text{ s} to t=9.0 st = 9.0\text{ s}, the velocity is constant, so the net force and additional work done are both zero.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the coefficient in x(t) with acceleration instead of half the acceleration, finding a = 1.5 m/s² and F_net = 375 N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x(t)=at2  ⟹  a=1.5 m/s2  ⟹  Fnet=ma=250×1.5=375 Nx(t) = a t^2 \implies a = 1.5\text{ m/s}^2 \implies F_{\text{net}} = m a = 250 \times 1.5 = 375\text{ N}

    Correct

    x(t)=12at2  ⟹  12a=1.5 m/s2  ⟹  a=3.0 m/s2  ⟹  Fnet=ma=(250 kg)(3.0 m/s2)=750 Nx(t) = \frac{1}{2} a t^2 \implies \frac{1}{2} a = 1.5\text{ m/s}^2 \implies a = 3.0\text{ m/s}^2 \implies F_{\text{net}} = m a = (250\text{ kg})(3.0\text{ m/s}^2) = 750\text{ N}

    In constant acceleration motion starting from rest, the position function is x(t)=12at2x(t) = \frac{1}{2} a t^2, not at2a t^2. Therefore, the coefficient 1.5 m/s21.5\text{ m/s}^2 corresponds to 12a\frac{1}{2}a, giving a=3.0 m/s2a = 3.0\text{ m/s}^2 and Fnet=750 NF_{\text{net}} = 750\text{ N}.

  2. Step 2

    v(4.0)=at=3.0×4.0=12 m/s  ⟹  From t=4.0 s to 9.0 s,v remains 12 m/sv(4.0) = a t = 3.0 \times 4.0 = 12\text{ m/s} \implies \text{From } t = 4.0\text{ s to } 9.0\text{ s}, v \text{ remains } 12\text{ m/s}

  3. Step 3

    Wnet=12mvf2−12mvi2  ⟹  Wnet=12(250)(12)2−0=18000 JW_{\text{net}} = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2 \implies W_{\text{net}} = \frac{1}{2}(250)(12)^2 - 0 = 18000\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the cart maintains a constant velocity of 12 m/s12\text{ m/s} during the linear segment of the position graph.

You applied the work-energy theorem correctly using the initial and final kinetic energies to find Wnet=18000 JW_{\text{net}} = 18000\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing factor of 1/2 in kinematic position equation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the standard quadratic kinematic relation is x(t)=at2x(t) = at^2 rather than x(t)=12at2x(t) = \frac{1}{2}at^2 (or did not take the second derivative a=d2xdt2a = \frac{d^2x}{dt^2}), leading you to equate the coefficient 1.51.5 directly to aa instead of 12a\frac{1}{2}a.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinematic Quadratic Term
  • For motion with constant acceleration starting from rest, x(t)=x0+v0t+12at2x(t) = x_0 + v_0 t + \frac{1}{2} a t^2.

  • Always equate the coefficient of t2t^2 to 12a\frac{1}{2}a, or take the second derivative d2xdt2\frac{d^2x}{dt^2} to find acceleration.

Calculus Verification
  • v(t)=dxdtv(t) = \frac{dx}{dt} and a(t)=dvdt=d2xdt2a(t) = \frac{dv}{dt} = \frac{d^2x}{dt^2}.

  • Differentiate x(t)=1.5t2x(t) = 1.5t^2 twice: first derivative gives v(t)=3.0tv(t) = 3.0t, and second derivative gives a=3.0 m/s2a = 3.0\text{ m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. x(t)=12at2=1.5t2  ⟹  a=2×1.5=3.0 m/s2x(t) = \frac{1}{2} a t^2 = 1.5 t^2 \implies a = 2 \times 1.5 = 3.0\text{ m/s}^2

  2. Fnet=ma=(250 kg)(3.0 m/s2)=750 NF_{\text{net}} = m a = (250\text{ kg})(3.0\text{ m/s}^2) = 750\text{ N}

Final answer

(a) Fnet=750 NF_{\text{net}} = 750\text{ N}; (b) Wnet=1.80×104 JW_{\text{net}} = 1.80 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • When reading a position equation x(t)=ct2x(t) = c t^2, write 12a=c\frac{1}{2}a = c to ensure the factor of 22 is not forgotten.

  • Use differentiation as a quick check whenever position is given as an algebraic function of time.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the velocity in the kinetic energy formula when applying the work-energy theorem, obtaining 1500 J instead of 18000 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dxdt=3.0t  ⟹  a=dvdt=3.0 m/s2v(t) = \frac{dx}{dt} = 3.0 t \implies a = \frac{dv}{dt} = 3.0\text{ m/s}^2

  2. Step 2

    Fnet=ma=250×3.0=750 NF_{\text{net}} = ma = 250 \times 3.0 = 750\text{ N}

  3. Step 3

    v(4.0)=3.0×4.0=12 m/s  ⟹  v(9.0)=v(4.0)=12 m/sv(4.0) = 3.0 \times 4.0 = 12\text{ m/s} \implies v(9.0) = v(4.0) = 12\text{ m/s}

  4. Step 4

    Wnet=(12)mvf−(12)mvi  ⟹  Wnet=(12)(250)(12)−0=1500 JW_{\text{net}} = \left(\frac{1}{2}\right) m v_f - \left(\frac{1}{2}\right) m v_i \implies W_{\text{net}} = \left(\frac{1}{2}\right)(250)(12) - 0 = 1500\text{ J}

    Correct

    Wnet=ΔK=12mvf2−12mvi2=12(250)(12)2−0=1.80×104 JW_{\text{net}} = \Delta K = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2 = \frac{1}{2}(250)(12)^2 - 0 = 1.80 \times 10^4\text{ J}

    You omitted the exponent 22 on the velocity terms in the kinetic energy formula; kinetic energy is proportional to velocity squared, K=12mv2K = \frac{1}{2}mv^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used calculus to relate position, velocity, and acceleration.

You accurately calculated the net force using Newton's second law.

You correctly interpreted the linear segment of the position-time graph as motion with constant velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Velocity Exponent in Kinetic Energy

You wrote 12mv\frac{1}{2}mv instead of 12mv2\frac{1}{2}mv^2 when expanding the kinetic energy terms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating kinetic energy with momentum or dropping the exponent 22 leads to an expression with dimensions of momentum rather than energy, yielding 1500 J1500\text{ J} instead of 18000 J18000\text{ J}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • Translational kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, never 12mv\frac{1}{2}mv.

  • Always check that velocity is squared so the units evaluate to kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}.

Dimensional Consistency
  • Work and kinetic energy have dimensions [M][L]2[T]−2[M][L]^2[T]^{-2}.

  • Perform a quick unit check: multiplying mass (kg) by velocity (m/s) gives momentum (N⋅s\text{N}\cdot\text{s}), not work (N⋅m\text{N}\cdot\text{m}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the work-energy theorem with proper exponents: Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2.

  2. Substitute m=250 kgm = 250\text{ kg}, vf=12 m/sv_f = 12\text{ m/s}, and vi=0 m/sv_i = 0\text{ m/s}: Wnet=12(250)(12)2−0W_{\text{net}} = \frac{1}{2}(250)(12)^2 - 0.

  3. Calculate (12)2=144(12)^2 = 144, then compute Wnet=125×144=18000 JW_{\text{net}} = 125 \times 144 = 18000\text{ J}.

Final answer

(a) Fnet=750 NF_{\text{net}} = 750\text{ N}; (b) Wnet=1.80×104 JW_{\text{net}} = 1.80 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic definitions of kinetic energy (K=12mv2K = \frac{1}{2}mv^2) versus linear momentum (p=mvp = mv).

  • Practice applying dimensional analysis to ensure formulas produce the intended physical units before plugging in values.

  • Complete the targeted flashcards and practice problems below to reinforce squaring velocity in energy calculations.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the cart continues to accelerate at 3.0 m/s² through the entire 9.0 s instead of recognizing constant velocity after 4.0 s, leading to an incorrect final velocity and work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dxdt=3.0t  ⟹  a=dvdt=3.0 m/s2  ⟹  Fnet=ma=250×3.0=750 Nv(t) = \frac{dx}{dt} = 3.0 t \implies a = \frac{dv}{dt} = 3.0\text{ m/s}^2 \implies F_{\text{net}} = ma = 250 \times 3.0 = 750\text{ N}

  2. Step 2

    v(9.0)=at=3.0×9.0=27 m/sv(9.0) = at = 3.0 \times 9.0 = 27\text{ m/s}

    Correct

    vf=v(4.0)=3.0(4.0)=12 m/sv_f = v(4.0) = 3.0(4.0) = 12\text{ m/s}

    The quadratic acceleration only applies from t=0.0 st = 0.0\text{ s} to t=4.0 st = 4.0\text{ s}. From t=4.0 st = 4.0\text{ s} to t=9.0 st = 9.0\text{ s}, the graph is a straight line, which means the slope (velocity) is constant and acceleration is zero. Therefore, the velocity remains at its t=4.0 st = 4.0\text{ s} value: v(9.0)=v(4.0)=12 m/sv(9.0) = v(4.0) = 12\text{ m/s}.

  3. Step 3

    Wnet=12mvf2−12mvi2  ⟹  Wnet=(12)(250)(27)2−0=91125 JW_{\text{net}} = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2 \implies W_{\text{net}} = \left(\frac{1}{2}\right)(250)(27)^2 - 0 = 91125\text{ J}

    Correct

    Wnet=ΔK=12(250 kg)(12 m/s)2−0=1.80×104 JW_{\text{net}} = \Delta K = \frac{1}{2}(250\text{ kg})(12\text{ m/s})^2 - 0 = 1.80 \times 10^4\text{ J}

    Your work-energy setup was completely sound, but substituting the incorrect final velocity of 27 m/s27\text{ m/s} led to an incorrect final work value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated x(t)=1.5t2x(t) = 1.5t^2 to find the acceleration and net force for the initial interval.

You correctly recognized that the total net work equals the change in kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ignored motion phase boundary / Assumed uniform acceleration beyond its domain

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the motion as a single uniformly accelerated interval from t=0.0 st = 0.0\text{ s} to t=9.0 st = 9.0\text{ s}, overlooking the fact that a linear segment on a position-time graph means zero curvature (a=0a = 0) and constant velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Interpret Shape on Position-Time Graphs
  • On an xx-tt graph, slope represents instantaneous velocity (v=dxdtv = \frac{dx}{dt}) and curvature represents acceleration (a=d2xdt2a = \frac{d^2x}{dt^2}). A parabolic curve means constant acceleration; a straight line means constant velocity (a=0a = 0).

  • Whenever an xx-tt graph switches from curved to linear, fix the velocity at the transition point for the entire linear segment.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the velocity at the transition point t=4.0 st = 4.0\text{ s}: v(4.0)=3.0(4.0)=12 m/sv(4.0) = 3.0(4.0) = 12\text{ m/s}.

  2. Because the graph is linear for 4.0 s≤t≤9.0 s4.0\text{ s} \le t \le 9.0\text{ s}, the slope does not change, so v(9.0)=12 m/sv(9.0) = 12\text{ m/s}.

  3. Substitute vf=12 m/sv_f = 12\text{ m/s} and vi=0 m/sv_i = 0\text{ m/s} into Wnet=12mvf2−12mvi2W_{\text{net}} = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2.

Final answer

(a) Fnet=750 NF_{\text{net}} = 750\text{ N}; (b) Wnet=1.80×104 JW_{\text{net}} = 1.80 \times 10^4\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the physical meaning of slope and curvature across piecewise xx-tt graphs.

  • Always mark transition points between different motion phases before plugging times into kinematic formulas.

Lock it in

Similar question

01

A 500 kg500\text{ kg} vehicle starts from rest at the origin, moving along a straight track with position x(t)=2.0t2x(t) = 2.0 t^2 (with xx in meters and tt in seconds) for 0≤t≤3.0 s0 \le t \le 3.0\text{ s}. Find the magnitude of the net force acting on the vehicle during this interval.

Answer

Fnet=2000 NF_{\text{net}} = 2000\text{ N}. Key steps: x(t)=12at2=2.0t2  ⟹  a=4.0 m/s2x(t) = \frac{1}{2}at^2 = 2.0t^2 \implies a = 4.0\text{ m/s}^2. Then Fnet=ma=(500 kg)(4.0 m/s2)=2000 NF_{\text{net}} = ma = (500\text{ kg})(4.0\text{ m/s}^2) = 2000\text{ N}.

02

A 120 kg120\text{ kg} bobsled moves along a straight track where its position is given by x(t)=0.80t2x(t) = 0.80 t^2 from t=0.0 st = 0.0\text{ s} to t=5.0 st = 5.0\text{ s}, after which it coasts at constant velocity until t=10.0 st = 10.0\text{ s}. Using the work-energy theorem, calculate the net work done on the bobsled from t=0.0 st = 0.0\text{ s} to t=10.0 st = 10.0\text{ s}.

Answer

Wnet=3840 JW_{\text{net}} = 3840\text{ J} (or 3.84×103 J3.84 \times 10^3\text{ J}). Key steps: a=2(0.80)=1.6 m/s2a = 2(0.80) = 1.6\text{ m/s}^2. Velocity at t=5.0 st = 5.0\text{ s} is v=at=(1.6)(5.0)=8.0 m/sv = at = (1.6)(5.0) = 8.0\text{ m/s}. During coasting, velocity remains 8.0 m/s8.0\text{ m/s}. Total work Wnet=ΔK=12(120 kg)(8.0 m/s)2−0=3840 JW_{\text{net}} = \Delta K = \frac{1}{2}(120\text{ kg})(8.0\text{ m/s})^2 - 0 = 3840\text{ J}.

03

A 4.0 kg4.0\text{ kg} block slides on a horizontal frictionless surface. Its position is described by x(t)=3.0t2−2.0tx(t) = 3.0 t^2 - 2.0 t for t≥0t \ge 0 (SI units). Determine (a) the constant net force acting on the block, and (b) the work done by the net force between t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s} using the work-energy theorem.

Answer

(a) Fnet=24 NF_{\text{net}} = 24\text{ N}; (b) Wnet=480 JW_{\text{net}} = 480\text{ J}. Key steps: Velocity is v(t)=dxdt=6.0t−2.0v(t) = \frac{dx}{dt} = 6.0t - 2.0, and acceleration is a=dvdt=6.0 m/s2a = \frac{dv}{dt} = 6.0\text{ m/s}^2. (a) Fnet=ma=(4.0)(6.0)=24 NF_{\text{net}} = ma = (4.0)(6.0) = 24\text{ N}. (b) At t=1.0 st = 1.0\text{ s}, v1=6.0(1.0)−2.0=4.0 m/sv_1 = 6.0(1.0) - 2.0 = 4.0\text{ m/s}; at t=3.0 st = 3.0\text{ s}, v2=6.0(3.0)−2.0=16.0 m/sv_2 = 6.0(3.0) - 2.0 = 16.0\text{ m/s}. Wnet=ΔK=12(4.0)(16.02−4.02)=2.0(256−16)=480 JW_{\text{net}} = \Delta K = \frac{1}{2}(4.0)(16.0^2 - 4.0^2) = 2.0(256 - 16) = 480\text{ J}.

Loading workspace…