Resources

In deep planetary atmospheres or ultra-deep ocean trenches, fluid compressibility becomes significant. Assume a fluid column has a depth-dependent density modeled by ρ(z)=ρ0(1+αz)\rho(z) = \rho_0 (1 + \alpha z), where zz is the depth measured downward from the free surface, surface density is ρ0=1.020×103 kg/m3\rho_0 = 1.020 \times 10^3\text{ kg/m}^3, and the compressibility coefficient is α=4.50×10−6 m−1\alpha = 4.50 \times 10^{-6}\text{ m}^{-1}. At the surface (z=0z = 0), atmospheric pressure is P0=1.013×105 PaP_0 = 1.013 \times 10^5\text{ Pa}. Taking g=9.81 m/s2g = 9.81\text{ m/s}^2, evaluate the exact absolute hydrostatic pressure at the Mariana Trench depth of z=1.10×104 mz = 1.10 \times 10^4\text{ m}, and calculate the percentage error introduced if the fluid had been modeled as strictly incompressible with constant density ρ0\rho_0.

Answer and steps

Final answer

Pexact=1.13×108 Pa,  Percentage Error=−2.42%P_{\text{exact}} = 1.13 \times 10^8\text{ Pa},\; \text{Percentage Error} = -2.42\%

Steps

01

Fundamental Hydrostatic Relationship

When fluid density varies with depth, the hydrostatic equation in differential form is: dPdz=ρ(z)g\frac{dP}{dz} = \rho(z) g

where zz is the depth measured vertically downward from the surface, gg is the acceleration due to gravity, and ρ(z)\rho(z) is the local density.

Integrating from the surface (z=0z = 0, where pressure is atmospheric pressure P0P_0) to a depth zz: P(z)=P0+∫0zρ(z′)g dz′P(z) = P_0 + \int_0^z \rho(z') g \, dz'

02

Evaluating the Exact Pressure for Compressible Fluid

Substitute the linear density function ρ(z′)=ρ0(1+αz′)\rho(z') = \rho_0 (1 + \alpha z'): P(z)=P0+ρ0g∫0z(1+αz′) dz′=P0+ρ0g(z+12αz2)P(z) = P_0 + \rho_0 g \int_0^z (1 + \alpha z') \, dz' = P_0 + \rho_0 g \left( z + \frac{1}{2} \alpha z^2 \right)

Now compute the numerical terms using the given values:

  • ρ0=1.020×103 kg/m3\rho_0 = 1.020 \times 10^3\text{ kg/m}^3
  • g=9.81 m/s2g = 9.81\text{ m/s}^2
  • ρ0g=(1.020×103 kg/m3)(9.81 m/s2)=1.00062×104 N/m3\rho_0 g = (1.020 \times 10^3\text{ kg/m}^3)(9.81\text{ m/s}^2) = 1.00062 \times 10^4\text{ N/m}^3
  • z=1.10×104 mz = 1.10 \times 10^4\text{ m}
  • 12αz2=12(4.50×10−6 m−1)(1.10×104 m)2=272.25 m\frac{1}{2}\alpha z^2 = \frac{1}{2}(4.50 \times 10^{-6}\text{ m}^{-1})(1.10 \times 10^4\text{ m})^2 = 272.25\text{ m}

The effective depth equivalent for the hydrostatic column is: zeff=z+12αz2=11,000 m+272.25 m=11,272.25 mz_{\text{eff}} = z + \frac{1}{2}\alpha z^2 = 11{,}000\text{ m} + 272.25\text{ m} = 11{,}272.25\text{ m}

Calculate the hydrostatic pressure contribution (gauge pressure): ΔPexact=(1.00062×104 N/m3)(11,272.25 m)≈1.12792×108 Pa\Delta P_{\text{exact}} = (1.00062 \times 10^4\text{ N/m}^3)(11{,}272.25\text{ m}) \approx 1.12792 \times 10^8\text{ Pa}

Adding the surface atmospheric pressure P0=1.013×105 Pa=0.00101×108 PaP_0 = 1.013 \times 10^5\text{ Pa} = 0.00101 \times 10^8\text{ Pa}: Pexact=1.013×105 Pa+1.12792×108 Pa≈1.13×108 PaP_{\text{exact}} = 1.013 \times 10^5\text{ Pa} + 1.12792 \times 10^8\text{ Pa} \approx 1.13 \times 10^8\text{ Pa}

03

Comparing with the Incompressible Model

Under the assumption of an incompressible fluid (α=0\alpha = 0), density remains constant at ρ0\rho_0: Pincomp=P0+ρ0gzP_{\text{incomp}} = P_0 + \rho_0 g z

Substituting the values: Pincomp=1.013×105 Pa+(1.00062×104 N/m3)(1.10×104 m)P_{\text{incomp}} = 1.013 \times 10^5\text{ Pa} + (1.00062 \times 10^4\text{ N/m}^3)(1.10 \times 10^4\text{ m}) Pincomp=1.013×105 Pa+1.10068×108 Pa=1.1017×108 PaP_{\text{incomp}} = 1.013 \times 10^5\text{ Pa} + 1.10068 \times 10^8\text{ Pa} = 1.1017 \times 10^8\text{ Pa}

04

Percentage Error Calculation

The percentage error introduced by the incompressible model relative to the true value is: Percentage Error=Pincomp−PexactPexact×100%\text{Percentage Error} = \frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\%

Evaluating this difference: Percentage Error=1.1017×108 Pa−1.1289×108 Pa1.1289×108 Pa×100%≈−2.42%\text{Percentage Error} = \frac{1.1017 \times 10^8\text{ Pa} - 1.1289 \times 10^8\text{ Pa}}{1.1289 \times 10^8\text{ Pa}} \times 100\% \approx -2.42\%

(Note: The negative sign indicates that treating the fluid as incompressible underestimates the pressure because it neglects the compaction of the fluid column at great depths.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to divide by 2 when integrating the linear term αz with respect to z, leading to an overestimated pressure and percentage error.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    dPdz=ρ0g(1+αz)\frac{dP}{dz} = \rho_0 g (1 + \alpha z)

  2. Step 2

    P(z)=P0+ρ0gz+ρ0gαz2P(z) = P_0 + \rho_0 g z + \rho_0 g \alpha z^2

    Correct

    P(z)=P0+ρ0g∫0z(1+αz′) dz′=P0+ρ0gz+12ρ0gαz2P(z) = P_0 + \rho_0 g \int_0^z (1 + \alpha z')\,dz' = P_0 + \rho_0 g z + \frac{1}{2}\rho_0 g \alpha z^2

    When integrating the linear term αz\alpha z with respect to zz, the power rule gives ∫z dz=12z2\int z\,dz = \frac{1}{2}z^2. You omitted the coefficient of 12\frac{1}{2}, making the compressibility contribution twice as large as it should be.

  3. Step 3

    ρ0gz=1.1007×108 Pa  ⟹  ρ0gαz2=5.4484×106 Pa  ⟹  P=1.013×105+1.1007×108+5.4484×106=1.1562×108 Pa\rho_0 g z = 1.1007 \times 10^8\text{ Pa} \implies \rho_0 g \alpha z^2 = 5.4484 \times 10^6\text{ Pa} \implies P = 1.013 \times 10^5 + 1.1007 \times 10^8 + 5.4484 \times 10^6 = 1.1562 \times 10^8\text{ Pa}

    Correct

    12ρ0gαz2=12(5.4484×106 Pa)=2.7242×106 Pa  ⟹  Pexact≈1.13×108 Pa\frac{1}{2}\rho_0 g \alpha z^2 = \frac{1}{2}(5.4484 \times 10^6\text{ Pa}) = 2.7242 \times 10^6\text{ Pa} \implies P_{\text{exact}} \approx 1.13 \times 10^8\text{ Pa}

    Your arithmetic evaluation followed your integrated formula accurately, but the resulting total pressure was overestimated due to the missing factor of 12\frac{1}{2}.

  4. Step 4

    Pincomp=P0+ρ0gz=1.013×105+1.1007×108=1.1017×108 PaP_{\text{incomp}} = P_0 + \rho_0 g z = 1.013 \times 10^5 + 1.1007 \times 10^8 = 1.1017 \times 10^8\text{ Pa}

  5. Step 5

    Percentage error=∣1.1017×108−1.1562×108∣1.1562×108×100%=4.71%\text{Percentage error} = \frac{|1.1017 \times 10^8 - 1.1562 \times 10^8|}{1.1562 \times 10^8} \times 100\% = 4.71\%

    Correct

    Percentage Error=Pincomp−PexactPexact×100%=1.1017×108−1.1289×1081.1289×108×100%≈−2.42%\text{Percentage Error} = \frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\% = \frac{1.1017 \times 10^8 - 1.1289 \times 10^8}{1.1289 \times 10^8} \times 100\% \approx -2.42\%

    Your percentage error formula was applied accurately to your intermediate values, but the numerical result was affected by the earlier integration slip.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related fluid density to pressure gradient using the differential hydrostatic equation dPdz=ρ(z)g\frac{dP}{dz} = \rho(z)g.

You accurately substituted values to evaluate the uncompressed hydrostatic column pressure ρ0gz\rho_0 g z.

You correctly included atmospheric surface pressure P0P_0 when computing absolute pressures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calculus integration rule omission

You integrated ∫z dz\int z\,dz as z2z^2 instead of 12z2\frac{1}{2}z^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the power rule denominator 1n+1\frac{1}{n+1} during polynomial integration of physical rate laws.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule for Integration
  • For any integer or real exponent n≠−1n \neq -1, ∫zn dz=zn+1n+1+C\int z^n \, dz = \frac{z^{n+1}}{n+1} + C.

  • Always write down the antiderivative step ∫z dz=12z2\int z\,dz = \frac{1}{2}z^2 explicitly before substituting numerical parameters.

Effective Mean Density Check
  • For linearly varying density ρ(z)=ρ0+mz\rho(z) = \rho_0 + m z, the integrated hydrostatic pressure is equivalent to ρˉgz\bar{\rho} g z where ρˉ=ρ0+12mz\bar{\rho} = \rho_0 + \frac{1}{2} m z.

  • Check whether your integrated formula matches the average density between the surface and target depth.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Integrate the hydrostatic equation using the power rule: P(z)=P0+ρ0g∫0z(1+αz′) dz′=P0+ρ0g(z+12αz2)P(z) = P_0 + \rho_0 g \int_0^z (1 + \alpha z')\,dz' = P_0 + \rho_0 g \left(z + \frac{1}{2}\alpha z^2\right).

  2. Compute the quadratic compressibility correction: ΔPcomp=12ρ0gαz2=12(1.1007×108 Pa)(4.50×10−6 m−1)(1.10×104 m)≈2.7242×106 Pa\Delta P_{\text{comp}} = \frac{1}{2} \rho_0 g \alpha z^2 = \frac{1}{2}(1.1007 \times 10^8\text{ Pa})(4.50 \times 10^{-6}\text{ m}^{-1})(1.10 \times 10^4\text{ m}) \approx 2.7242 \times 10^6\text{ Pa}.

  3. Calculate total absolute pressure: Pexact=1.013×105 Pa+1.1007×108 Pa+2.7242×106 Pa≈1.1289×108 Pa≈1.13×108 PaP_{\text{exact}} = 1.013 \times 10^5\text{ Pa} + 1.1007 \times 10^8\text{ Pa} + 2.7242 \times 10^6\text{ Pa} \approx 1.1289 \times 10^8\text{ Pa} \approx 1.13 \times 10^8\text{ Pa}.

  4. Compute percentage error of the incompressible model: Pincomp−PexactPexact×100%=1.1017×108−1.1289×1081.1289×108×100%≈−2.42%\frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\% = \frac{1.1017 \times 10^8 - 1.1289 \times 10^8}{1.1289 \times 10^8} \times 100\% \approx -2.42\%.

Final answer

Pexact=1.13×108 Pa,Percentage Error=−2.42%P_{\text{exact}} = 1.13 \times 10^8\text{ Pa},\quad \text{Percentage Error} = -2.42\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice integrating linear profiles ∫(A+Bz) dz\int (A + Bz)\,dz to reinforce retaining the denominator of 2.

  • Use the midpoint/average value concept ρˉ=ρtop+ρbottom2\bar{\rho} = \frac{\rho_{\text{top}} + \rho_{\text{bottom}}}{2} as a quick mental check for linear distributions.

  • Review whether an error should retain its sign (indicating underestimation vs. overestimation) unless an absolute value is explicitly requested.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the gauge pressure instead of the absolute hydrostatic pressure by omitting the atmospheric surface pressure P₀.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dPdz=ρ0g(1+αz)  ⟹  P(z)=ρ0gz+12ρ0gαz2\frac{dP}{dz} = \rho_0 g (1 + \alpha z) \implies P(z) = \rho_0 g z + \frac{1}{2} \rho_0 g \alpha z^2

    Correct

    dPdz=ρ0g(1+αz)  ⟹  P(z)=P0+ρ0gz+12ρ0gαz2\frac{dP}{dz} = \rho_0 g (1 + \alpha z) \implies P(z) = P_0 + \rho_0 g z + \frac{1}{2} \rho_0 g \alpha z^2

    You integrated the hydrostatic differential equation correctly with respect to zz, but you omitted the boundary condition at the surface (z=0z = 0, where P=P0P = P_0). Including P0P_0 is required for the absolute pressure.

  2. Step 2

    P=1.1007×108+2.724×106=1.1279×108 PaP = 1.1007 \times 10^8 + 2.724 \times 10^6 = 1.1279 \times 10^8\text{ Pa}

    Correct

    Pexact=1.013×105+1.1007×108+2.724×106≈1.13×108 PaP_{\text{exact}} = 1.013 \times 10^5 + 1.1007 \times 10^8 + 2.724 \times 10^6 \approx 1.13 \times 10^8\text{ Pa}

    Your numerical integration terms are accurate, but because P0=1.013×105 PaP_0 = 1.013 \times 10^5\text{ Pa} was missing from your formula, the resulting value represents gauge pressure instead of absolute pressure.

  3. Step 3

    Pincomp=ρ0gz=1.1007×108 PaP_{\text{incomp}} = \rho_0 g z = 1.1007 \times 10^8\text{ Pa}

    Correct

    Pincomp=P0+ρ0gz=1.013×105+1.1007×108=1.1017×108 PaP_{\text{incomp}} = P_0 + \rho_0 g z = 1.013 \times 10^5 + 1.1007 \times 10^8 = 1.1017 \times 10^8\text{ Pa}

    You calculated the pressure of the incompressible fluid column accurately, but this also omitted the surface pressure P0P_0 needed for absolute pressure.

  4. Step 4

    Percentage error=∣1.1007×108−1.1279×108∣1.1279×108×100%  ⟹  Percentage error=2.42%\text{Percentage error} = \frac{|1.1007 \times 10^8 - 1.1279 \times 10^8|}{1.1279 \times 10^8} \times 100\% \implies \text{Percentage error} = 2.42\%

    Correct

    Percentage error=Pincomp−PexactPexact×100%=1.1017×108−1.1289×1081.1289×108×100%≈−2.42%\text{Percentage error} = \frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\% = \frac{1.1017 \times 10^8 - 1.1289 \times 10^8}{1.1289 \times 10^8} \times 100\% \approx -2.42\%

    You correctly calculated the relative magnitude difference of 2.42%2.42\%. Notice that defining percentage error as approx−exactexact\frac{\text{approx} - \text{exact}}{\text{exact}} yields −2.42%-2.42\%, showing that the incompressible model underestimates the actual pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the differential hydrostatic equation dPdz=ρ(z)g\frac{dP}{dz} = \rho(z) g.

You accurately integrated the linear density profile ρ0(1+αz)\rho_0 (1 + \alpha z) to get the fluid column contribution ρ0gz+12ρ0gαz2\rho_0 g z + \frac{1}{2} \rho_0 g \alpha z^2.

You correctly substituted the numerical parameters and evaluated the percentage difference.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gauge vs. Absolute Pressure Omission

You solved for the gauge pressure ΔP=∫0zρ(z′)g dz′\Delta P = \int_0^z \rho(z') g \, dz' rather than adding the initial atmospheric surface pressure P0P_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing absolute hydrostatic pressure with gauge pressure by forgetting to apply the initial boundary condition P(0)=P0P(0) = P_0 during definite integration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the requested pressure type
  • Absolute pressure is given by Pabs=P0+PgaugeP_{\text{abs}} = P_0 + P_{\text{gauge}}, where P0P_0 is the ambient pressure at the surface.

  • Always check whether the problem asks for 'absolute' or 'gauge' pressure, and add P0P_0 whenever absolute pressure is specified.

Use definite limits during integration
  • Integrating ∫P0P(z)dP=∫0zρ(z′)g dz′\int_{P_0}^{P(z)} dP = \int_0^z \rho(z') g \, dz' automatically maintains the boundary value P0P_0.

  • Write down definite integral bounds with P(0)=P0P(0) = P_0 instead of treating the pressure field as an indefinite integral without a constant.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the definite integral with surface boundary condition P(0)=P0P(0) = P_0: P(z)=P0+∫0zρ0g(1+αz′) dz′=P0+ρ0gz+12ρ0gαz2P(z) = P_0 + \int_0^z \rho_0 g (1 + \alpha z')\,dz' = P_0 + \rho_0 g z + \frac{1}{2} \rho_0 g \alpha z^2.

  2. Substitute P0=1.013×105 PaP_0 = 1.013 \times 10^5\text{ Pa}, ρ0gz=1.1007×108 Pa\rho_0 g z = 1.1007 \times 10^8\text{ Pa}, and 12ρ0gαz2=2.724×106 Pa\frac{1}{2}\rho_0 g \alpha z^2 = 2.724 \times 10^6\text{ Pa} to obtain Pexact=1.013×105+1.1279×108≈1.13×108 PaP_{\text{exact}} = 1.013 \times 10^5 + 1.1279 \times 10^8 \approx 1.13 \times 10^8\text{ Pa}.

  3. Compute the incompressible absolute pressure: Pincomp=P0+ρ0gz=1.013×105+1.1007×108=1.1017×108 PaP_{\text{incomp}} = P_0 + \rho_0 g z = 1.013 \times 10^5 + 1.1007 \times 10^8 = 1.1017 \times 10^8\text{ Pa}.

  4. Calculate the signed percentage error: Pincomp−PexactPexact×100%=1.1017×108−1.1289×1081.1289×108×100%≈−2.42%\frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\% = \frac{1.1017 \times 10^8 - 1.1289 \times 10^8}{1.1289 \times 10^8} \times 100\% \approx -2.42\%.

Final answer

Pexact=1.13×108 Pa,  Percentage Error=−2.42%P_{\text{exact}} = 1.13 \times 10^8\text{ Pa},\; \text{Percentage Error} = -2.42\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between gauge pressure and absolute pressure in fluids.

  • Practice using definite integrals with explicit upper and lower boundary limits when solving differential equations in physics.

  • Check the sign convention of percentage errors to confirm whether an approximation overestimates or underestimates the true value.

OverviewACEpath Teacher's Diagnosis

03 The student defines the percentage error relative to the incompressible approximation instead of the exact reference value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    dPdz=ρ0g(1+αz)  ⟹  P(z)=P0+ρ0gz+(12)ρ0gαz2\frac{dP}{dz} = \rho_0 g (1 + \alpha z) \implies P(z) = P_0 + \rho_0 g z + \left(\frac{1}{2}\right)\rho_0 g \alpha z^2

  2. Step 2

    ρ0gz=1.1007×108 Pa  ⟹  (12)ρ0gαz2=2.724×106 Pa  ⟹  P=1.013×105+1.1007×108+2.724×106=1.1290×108 Pa\rho_0 g z = 1.1007 \times 10^8\text{ Pa} \implies \left(\frac{1}{2}\right)\rho_0 g \alpha z^2 = 2.724 \times 10^6\text{ Pa} \implies P = 1.013 \times 10^5 + 1.1007 \times 10^8 + 2.724 \times 10^6 = 1.1290 \times 10^8\text{ Pa}

  3. Step 3

    Pincomp=1.013×105+1.1007×108=1.1017×108 PaP_{\text{incomp}} = 1.013 \times 10^5 + 1.1007 \times 10^8 = 1.1017 \times 10^8\text{ Pa}

  4. Step 4

    Percentage error=∣1.1017×108−1.1290×108∣1.1017×108×100%=2.48%\text{Percentage error} = \frac{|1.1017 \times 10^8 - 1.1290 \times 10^8|}{1.1017 \times 10^8} \times 100\% = 2.48\%

    Correct

    Percentage error=Pincomp−PexactPexact×100%≈−2.42%\text{Percentage error} = \frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\% \approx -2.42\%

    You placed the approximate value PincompP_{\text{incomp}} in the denominator instead of the true reference value PexactP_{\text{exact}}. Percentage error measures deviation relative to the true or accepted value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly integrated the variable-density hydrostatic equation to find the exact pressure formula.

You accurately calculated the numerical contributions of each pressure term.

You correctly computed the baseline pressure under the incompressible model.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Reference Base in Percentage Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined percentage error relative to the approximation (PincompP_{\text{incomp}}) rather than the standard reference base (PexactP_{\text{exact}}). By definition, relative error and percentage error must always have the true, exact value as the denominator: approx−exactexact×100%\frac{\text{approx} - \text{exact}}{\text{exact}} \times 100\%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying the Reference Base
  • Percentage error is defined as Approximation−ExactExact×100%\frac{\text{Approximation} - \text{Exact}}{\text{Exact}} \times 100\%.

  • Always place the true/exact physical quantity in the denominator, never the simplified approximation.

Retaining the Sign of Error
  • A negative percentage error indicates an underestimate, while a positive percentage error indicates an overestimate.

  • Keep the signed difference (Pincomp−Pexact)(P_{\text{incomp}} - P_{\text{exact}}) so the result reflects that the incompressible model underestimates deep ocean pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the definition of percentage error relative to the true value: Percentage Error=Pincomp−PexactPexact×100%\text{Percentage Error} = \frac{P_{\text{incomp}} - P_{\text{exact}}}{P_{\text{exact}}} \times 100\%.

  2. Substitute Pincomp=1.1017×108 PaP_{\text{incomp}} = 1.1017 \times 10^8\text{ Pa} and Pexact=1.1290×108 PaP_{\text{exact}} = 1.1290 \times 10^8\text{ Pa}: Percentage Error=1.1017×108−1.1290×1081.1290×108×100%=−0.0273×1081.1290×108×100%\text{Percentage Error} = \frac{1.1017 \times 10^8 - 1.1290 \times 10^8}{1.1290 \times 10^8} \times 100\% = \frac{-0.0273 \times 10^8}{1.1290 \times 10^8} \times 100\%.

  3. Evaluate the quotient: Percentage Error≈−2.42%\text{Percentage Error} \approx -2.42\%.

Final answer

Pexact=1.13×108 Pa,  Percentage Error=−2.42%P_{\text{exact}} = 1.13 \times 10^8\text{ Pa},\; \text{Percentage Error} = -2.42\%

NEXT STEPS
Final Takeaways from Your Teacher
  • When calculating percentage error or relative error, double-check whether the denominator represents the accepted, exact value or an approximation.

  • Review whether your instructor or prompt expects signed percentage error to show underestimation versus overestimation.

Lock it in

Similar question

01

A liquid column in a centrifuge has density profile ρ(r)=ρ0(1+cr)\rho(r) = \rho_0 (1 + c r) from r=0r = 0 to r=Rr = R under constant effective body acceleration aa. Find an expression for the gauge pressure at r=Rr = R.

Answer

ΔP=ρ0aR(1+12cR)\Delta P = \rho_0 a R \left(1 + \frac{1}{2} c R\right). Integrate dP=ρ(r)a drdP = \rho(r) a\,dr: ∫0Rρ0a(1+cr) dr=ρ0a[r+12cr2]0R=ρ0aR(1+12cR)\int_0^R \rho_0 a (1 + cr)\,dr = \rho_0 a \left[r + \frac{1}{2}cr^2\right]_0^R = \rho_0 a R \left(1 + \frac{1}{2} c R\right).

02

An ocean trench has density ρ(z)=ρ0(1+αz)\rho(z) = \rho_0 (1 + \alpha z) with ρ0=1000 kg/m3\rho_0 = 1000\text{ kg/m}^3, α=4.0×10−5 m−1\alpha = 4.0 \times 10^{-5}\text{ m}^{-1}, and g=10 m/s2g = 10\text{ m/s}^2. Neglecting atmospheric pressure, calculate the gauge pressure at depth z=5000 mz = 5000\text{ m}.

Answer

5.50×107 Pa5.50 \times 10^7\text{ Pa}. Gauge pressure is ΔP=ρ0g(z+12αz2)=(1000)(10)(5000+12(4.0×10−5)(5000)2)=104(5000+500)=5.50×107 Pa\Delta P = \rho_0 g \left(z + \frac{1}{2}\alpha z^2\right) = (1000)(10)\left(5000 + \frac{1}{2}(4.0 \times 10^{-5})(5000)^2\right) = 10^4(5000 + 500) = 5.50 \times 10^7\text{ Pa}.

03

A gas layer has a quadratic density profile ρ(z)=ρ0(1+kz2)\rho(z) = \rho_0 (1 + k z^2) under uniform gravity gg. Determine the difference between the true hydrostatic pressure change ΔPexact\Delta P_{\text{exact}} and the constant-density approximation ΔP0=ρ0gz\Delta P_0 = \rho_0 g z across a thickness HH.

Answer

ΔPexact−ΔP0=13ρ0gkH3\Delta P_{\text{exact}} - \Delta P_0 = \frac{1}{3} \rho_0 g k H^3. Integrate ΔPexact=∫0Hρ0g(1+kz2) dz=ρ0g(H+13kH3)\Delta P_{\text{exact}} = \int_0^H \rho_0 g (1 + kz^2)\,dz = \rho_0 g \left(H + \frac{1}{3}k H^3\right). Subtracting ΔP0=ρ0gH\Delta P_0 = \rho_0 g H leaves 13ρ0gkH3\frac{1}{3} \rho_0 g k H^3.

Loading workspace…