Resources
A student forms a closed rigid rectangular wire loop of width and height carrying a clockwise current of . The entire loop is immersed in a uniform horizontal magnetic field directed in the plane of the loop pointing from left to right (parallel to the top and bottom segments). (a) Calculate the net magnetic force exerted on the complete closed loop. (b) Calculate the magnetic force on the left vertical segment alone and explain why a non-zero magnetic torque acts on the loop despite .
Answer and steps
Final answer
(a) ; (b) directed perpendicularly out of the plane; although opposing forces sum to zero vectorially, their separated lines of action produce a non-zero net torque of .
Steps
Force on the Left Segment
Part (a): Net Magnetic Force on the Closed Loop
The magnetic force exerted on a straight wire segment of length vector carrying a steady current in a uniform magnetic field is given by: We can analyze the forces acting on each of the four segments of the rectangular loop:
- Top segment: The current flows parallel to the magnetic field ().
- Bottom segment: The current flows antiparallel to the magnetic field ().
- Vertical segments (left and right): Both segments are perpendicular to () and have equal length . Because the current flows in opposite vertical directions on the left and right segments, the cross products yield forces of identical magnitude but directly opposing directions: Summing the forces over all four segments yields: (General principle: For any closed current loop of arbitrary geometry placed in a uniform magnetic field, , because the closed vector path integral .)
Part (b): Magnetic Force on the Left Segment and Origin of Torque
The left segment has length oriented perpendicular to (). The magnitude of the magnetic force on this segment is:
By the right-hand rule, the force is directed perpendicularly out of the plane of the loop.
Why a Non-Zero Torque Exists Despite
A common pitfall is to assume that zero net force implies zero net torque. While translational equilibrium requires , rotational equilibrium requires .
- The force on the left segment () acts out of the plane.
- The force on the right segment () acts into the plane.
- Although these two equal-and-opposite forces add to zero translational force, they do not share the same line of action. They are separated by the full width of the loop, .
This pair of equal, opposite, and non-collinear forces constitutes a couple, which exerts a net torque about the vertical central axis of the loop:
Alternatively, using the magnetic dipole moment where :
Because the opposing forces act along separated lines of action, they cause the loop to rotate about its vertical centerline even while the loop experiences no translational acceleration.
Typical errors
01 The student misapplies the right-hand rule and reverses the direction of the magnetic force on the left segment to into the page.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You determined the force direction as into the page, but applying the standard right-hand rule for the cross product on this segment yields a direction perpendicularly out of the plane.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the closed loop integral property to establish that the net magnetic force is zero.
You calculated the magnetic force magnitude on the left wire segment accurately.
You clearly articulated why non-collinear opposing forces produce a non-zero torque.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou reversed the direction of the magnetic force vector on the left vertical segment.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisorienting the vector cross product or confusing the palm/thumb conventions in the right-hand rule when establishing vector directions in three dimensions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Right-Hand Rule for Magnetic Force
For , point the fingers of your right hand along current vector and curl them toward field vector . Your extended thumb points along .
Always verify that you are using your right hand rather than your left hand, and confirm the orientation of each vector before finding the cross product.
CORRECTED PATH
ACEpath Teacher's DemonstrationRe-evaluate the orientation for the left segment carrying current in the loop relative to the magnetic field .
Apply using the right-hand rule to find that the force points perpendicularly out of the plane.
(a) ; (b) directed perpendicularly out of the plane; non-zero torque exists because the equal and opposite forces act along separated lines of action.
02 The student confuses the dimensions and uses the width instead of the height for the length of the left vertical segment.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The left segment is a vertical wire, so its length is the loop height , not the horizontal width .
- Step 3
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the closed line integral property to conclude that the net magnetic force is zero.
You correctly used the right-hand rule to find the direction of the force on the left wire.
You correctly explained that non-collinear opposing forces create a non-zero torque.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the width rather than the vertical height for the length of the vertical segment.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisGeometric dimension misassignment: overlooking the orientation of the specific wire segment (vertical vs. horizontal) when matching problem labels ( vs. ) to the wire length .
REASONING PATH
Your ACEpath teacher’s suggested approach- Segment Dimension Check
For a straight wire segment in , is the physical length along that specific segment.
Before calculating, label each wire segment on a quick sketch with its specific dimension ( for vertical segments, for horizontal segments).
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the length of the left vertical segment as .
Substitute into the force equation: .
(a) ; (b) directed perpendicularly out of the plane; net torque is non-zero because the opposing forces act along separated lines of action.
03 The student incorrectly assumes that zero net force always requires zero net torque, concluding the magnetic torque must be zero.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
and are equal in magnitude and opposite in direction, but separated by width , forming a couple with non-zero torque .
Translational equilibrium () does not guarantee rotational equilibrium (). Because the equal and opposite forces on the left and right segments have different lines of action, they form a force couple that produces a net rotational torque.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the vector sum of magnetic forces over any closed loop in a uniform field vanishes.
You correctly applied to determine the magnitude and direction of the magnetic force on the left vertical wire.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated zero net force with complete static equilibrium, assuming that automatically forces .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated equilibrium as a single condition rather than separating translational equilibrium () from rotational equilibrium (). When equal and opposite forces do not share a common line of action, their lever arms produce a non-zero couple torque.
REASONING PATH
Your ACEpath teacher’s suggested approach- Separation of Translational and Rotational Equilibrium
An object satisfies translational equilibrium when , but rotational equilibrium independently requires .
Always evaluate torques about an axis by multiplying each force by its perpendicular moment arm, even when the net force is zero.
- Magnetic Couple on a Current Loop
Opposite sides of a current loop experience equal and opposite magnetic forces separated by a distance , producing a couple torque .
Check whether opposing magnetic forces share the exact same line of action before claiming that the torque is zero.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the force on the right segment: directed into the page.
Observe that and act along parallel lines separated by the loop width .
Calculate the couple torque about the vertical centerline: (or ).
State the conceptual conclusion: while prevents translational acceleration, the non-collinear forces create a non-zero torque that rotates the loop.
; out of the page; non-zero torque exists because the opposing forces act along lines of action separated by .
Lock it in
How do you find the direction of the magnetic force on a straight current-carrying wire?
Point the fingers of your right hand along the current direction , curl them toward , and your thumb points in the direction of .
Similar question
A straight wire segment of length carries a current of directed toward the top of the page. A uniform magnetic field of is directed perpendicularly into the page. Find the magnitude and direction of the magnetic force on the wire.
Answer
. Point fingers up (current) and curl into the page (field); your thumb points to the left. Thus, directed to the left.
A square loop of side length lies in the -plane and carries a counter-clockwise current . A uniform magnetic field is present. Calculate the magnetic force on the bottom edge and the net torque acting on the loop.
Answer
On the bottom edge, current flows in the direction (parallel to ), so . The magnetic moment is . The net torque is .
A circular wire loop of radius carrying current is tilted such that its area normal makes an angle of with a uniform magnetic field . Determine the net translational magnetic force on the loop and the magnitude of the torque tending to rotate it.
Answer
Because the loop is closed and the magnetic field is uniform, the net translational force is . The magnetic dipole moment magnitude is . The torque magnitude is .