Resources

A collimated beam of unpolarized light with an irradiance of 3.50 mW/cm23.50\text{ mW/cm}^2 passes through a circular aperture of diameter d=4.00 mmd = 4.00\text{ mm} and strikes a stack of two ideal linear polarizers. The angle between the transmission axes of the two polarizers is θ=25.0∘\theta = 25.0^\circ. Calculate the total radiant power emerging from the second polarizer, in milliwatts (mW\text{mW}).

Answer and steps

Final answer

0.180 mW0.180\text{ mW}

Steps

01

Calculate the area of the circular aperture

To find the radiant power emerging from the second polarizer, we follow the propagation of light through the aperture and the two polarizers step by step.

The aperture has a diameter of d=4.00 mm=0.400 cmd = 4.00\text{ mm} = 0.400\text{ cm}. The cross-sectional area AA of the beam is: A=π(d2)2=π(0.200 cm)2≈0.1257 cm2A = \pi \left(\frac{d}{2}\right)^2 = \pi (0.200\text{ cm})^2 \approx 0.1257\text{ cm}^2

02

Determine the power incident on the first polarizer

Given an initial irradiance I0=3.50 mW/cm2I_0 = 3.50\text{ mW/cm}^2, the total radiant power P0P_0 entering the system is: P0=I0A=3.50 mW/cm2×0.1257 cm2≈0.4398 mWP_0 = I_0 A = 3.50\text{ mW/cm}^2 \times 0.1257\text{ cm}^2 \approx 0.4398\text{ mW}

03

Transmission through the first polarizer (One-Half Rule)

The incident light is unpolarized. When unpolarized light passes through an ideal linear polarizer, the transmitted irradiance (and therefore the transmitted power) is halved because the electric field components perpendicular to the transmission axis are absorbed: P1=12P0=12(0.4398 mW)≈0.2199 mWP_1 = \frac{1}{2}P_0 = \frac{1}{2}(0.4398\text{ mW}) \approx 0.2199\text{ mW}

The light emerging from this first polarizer is now linearly polarized along its transmission axis.

04

Transmission through the second polarizer (Malus's Law)

According to Malus's Law, when linearly polarized light passes through a second polarizer whose transmission axis forms an angle θ\theta with the polarization direction of the light, the transmitted power is: P2=P1cos⁡2θP_2 = P_1 \cos^2\theta

Substituting θ=25.0∘\theta = 25.0^\circ: cos⁡(25.0∘)≈0.9063  ⟹  cos⁡2(25.0∘)≈0.8214\cos(25.0^\circ) \approx 0.9063 \implies \cos^2(25.0^\circ) \approx 0.8214

Thus, the final transmitted power is: P2=0.2199 mW×0.8214≈0.180 mWP_2 = 0.2199\text{ mW} \times 0.8214 \approx 0.180\text{ mW}

(Common Pitfall: Forgetting that the incident light is unpolarized and directly applying Malus's Law to P0P_0 instead of taking the initial factor of 12\frac{1}{2} for the first polarizer).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that unpolarized light loses half of its intensity upon passing through the first polarizer, applying Malus's law directly to the full incident power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=4.00 mm/2=0.200 cm  ⟹  A=π×(0.200 cm)2=0.1257 cm2r = 4.00\text{ mm} / 2 = 0.200\text{ cm} \implies A = \pi \times (0.200\text{ cm})^2 = 0.1257\text{ cm}^2

  2. Step 2

    P0=I0×A=3.50 mW/cm2×0.1257 cm2=0.4398 mWP_0 = I_0 \times A = 3.50\text{ mW/cm}^2 \times 0.1257\text{ cm}^2 = 0.4398\text{ mW}

  3. Step 3

    P=P0×cos⁡2(25.0∘)P = P_0 \times \cos^2(25.0^\circ)

    Correct

    P1=12P0  ⟹  P2=P1cos⁡2(25.0∘)=12P0cos⁡2(25.0∘)P_1 = \frac{1}{2}P_0 \implies P_2 = P_1 \cos^2(25.0^\circ) = \frac{1}{2}P_0 \cos^2(25.0^\circ)

    The incident beam is unpolarized. When unpolarized light passes through the first ideal linear polarizer, its intensity is halved (P1=12P0P_1 = \frac{1}{2}P_0). Malus's Law only applies once light is already linearly polarized, describing the transmission between the first and second polarizers.

  4. Step 4

    P=0.4398 mW×0.8214=0.361 mWP = 0.4398\text{ mW} \times 0.8214 = 0.361\text{ mW}

    Correct

    P2=12(0.4398 mW)×cos⁡2(25.0∘)≈0.180 mWP_2 = \frac{1}{2}(0.4398\text{ mW}) \times \cos^2(25.0^\circ) \approx 0.180\text{ mW}

    Because the first polarizer transmission factor of 12\frac{1}{2} was omitted in the previous step, your final numerical value is exactly double the correct power.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted units from millimeters to centimeters before finding the aperture area.

You accurately calculated the incident radiant power from the given irradiance and aperture area.

You correctly evaluated cos⁡2(25.0∘)≈0.8214\cos^2(25.0^\circ) \approx 0.8214.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of One-Half Rule for Unpolarized Light

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the two-polarizer system as having a single transmission factor governed by Malus's Law, forgetting that the incident light is unpolarized and must first pass through Polarizer 1 (which reduces intensity by half) before Malus's Law can relate Polarizer 1 to Polarizer 2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Initial Polarization State
  • Unpolarized light entering an ideal linear polarizer always emerges linearly polarized with an intensity of I1=12I0I_1 = \frac{1}{2}I_0.

  • Always apply the one-half rule at the very first polarizer whenever the source beam is unpolarized.

Apply Malus's Law Between Polarizers
  • Malus's Law I=Iicos⁡2θI = I_i \cos^2\theta applies strictly between two successive states of linear polarization, where θ\theta is the relative angle between the transmission axes.

  • Use P2=P1cos⁡2θP_2 = P_1 \cos^2\theta with P1=12P0P_1 = \frac{1}{2}P_0, yielding P2=12P0cos⁡2θP_2 = \frac{1}{2}P_0 \cos^2\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that light incident on Polarizer 1 is unpolarized, so the power emerging from Polarizer 1 is P1=12P0=12(0.4398 mW)=0.2199 mWP_1 = \frac{1}{2}P_0 = \frac{1}{2}(0.4398\text{ mW}) = 0.2199\text{ mW}.

  2. Apply Malus's Law for the transition from Polarizer 1 to Polarizer 2: P2=P1cos⁡2(25.0∘)P_2 = P_1 \cos^2(25.0^\circ).

  3. Multiply 0.2199 mW×0.82140.2199\text{ mW} \times 0.8214 to obtain the final emerging power.

Final answer

0.180 mW0.180\text{ mW}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental difference between how an ideal polarizer affects unpolarized light versus linearly polarized light.

  • Solve multi-polarizer problems by labeling intermediate powers (P0→P1→P2P_0 \to P_1 \to P_2) step-by-step rather than jumping straight to a single formula.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly applies Malus's law with cos(θ) instead of cos²(θ) when determining the power transmitted through the second polarizer.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=0.200 cm  ⟹  A=π×(0.200 cm)2=0.1257 cm2r = 0.200\text{ cm} \implies A = \pi \times (0.200\text{ cm})^2 = 0.1257\text{ cm}^2

  2. Step 2

    P0=3.50 mW/cm2×0.1257 cm2=0.4398 mWP_0 = 3.50\text{ mW/cm}^2 \times 0.1257\text{ cm}^2 = 0.4398\text{ mW}

  3. Step 3

    P1=P02=0.2199 mWP_1 = \frac{P_0}{2} = 0.2199\text{ mW}

  4. Step 4

    P2=P1×cos⁡(25.0∘)  ⟹  P2=0.2199 mW×0.9063=0.199 mWP_2 = P_1 \times \cos(25.0^\circ) \implies P_2 = 0.2199\text{ mW} \times 0.9063 = 0.199\text{ mW}

    Correct

    P2=P1cos⁡2(25.0∘)≈0.2199 mW×(0.9063)2≈0.180 mWP_2 = P_1 \cos^2(25.0^\circ) \approx 0.2199\text{ mW} \times (0.9063)^2 \approx 0.180\text{ mW}

    You applied Malus's Law using cos⁡θ\cos\theta rather than cos⁡2θ\cos^2\theta. While the electric field amplitude scales as E=E0cos⁡θE = E_0 \cos\theta, radiant power and irradiance are proportional to the square of the field amplitude (P∝E2P \propto E^2), requiring the factor cos⁡2θ\cos^2\theta.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the aperture area from the given diameter.

You correctly computed the total incident power on the aperture.

You correctly halved the power for unpolarized light traversing the first polarizer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula error in Malus's Law

You wrote cos⁡(25.0∘)\cos(25.0^\circ) instead of cos⁡2(25.0∘)\cos^2(25.0^\circ) when finding the power transmitted through the second polarizer.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the transmission factor for electric field amplitude (E∝cos⁡θE \propto \cos\theta) with that for radiant power or irradiance (P,I∝E2∝cos⁡2θP, I \propto E^2 \propto \cos^2\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Electric Field vs. Power
  • Electric field scales as E2=E1cos⁡θE_2 = E_1 \cos\theta, but irradiance and power scale as P2=P1cos⁡2θP_2 = P_1 \cos^2\theta.

  • Always square the cosine factor whenever calculating intensity, irradiance, or power in Malus's Law.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. P2=P1cos⁡2(25.0∘)P_2 = P_1 \cos^2(25.0^\circ)

  2. P2=0.2199 mW×(0.9063)2P_2 = 0.2199\text{ mW} \times (0.9063)^2

  3. P2≈0.2199 mW×0.8214≈0.180 mWP_2 \approx 0.2199\text{ mW} \times 0.8214 \approx 0.180\text{ mW}

Final answer

0.180 mW0.180\text{ mW}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical origin of Malus's Law to connect electric field projection with intensity (I∝E2I \propto E^2).

  • When computing transmitted light through polarizers, explicitly check whether the question asks for electric field amplitude or power/intensity.

OverviewACEpath Teacher's Diagnosis

03 The student uses the diameter instead of the radius to calculate the circular aperture area, overestimating the power by a factor of 4.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    d=4.00 mm=0.400 cmd = 4.00\text{ mm} = 0.400\text{ cm}

  2. Step 2

    A=π×d2=π×(0.400 cm)2=0.5027 cm2A = \pi \times d^2 = \pi \times (0.400\text{ cm})^2 = 0.5027\text{ cm}^2

    Correct

    A=π(d2)2=π(0.200 cm)2≈0.1257 cm2A = \pi \left(\frac{d}{2}\right)^2 = \pi (0.200\text{ cm})^2 \approx 0.1257\text{ cm}^2

    You used the diameter directly in A=πd2A = \pi d^2 instead of using the radius r=d2=0.200 cmr = \frac{d}{2} = 0.200\text{ cm} in A=πr2A = \pi r^2 (or A=π4d2A = \frac{\pi}{4}d^2).

  3. Step 3

    P0=3.50 mW/cm2×0.5027 cm2=1.759 mWP_0 = 3.50\text{ mW/cm}^2 \times 0.5027\text{ cm}^2 = 1.759\text{ mW}

    Correct

    P0=I0A=3.50 mW/cm2×0.1257 cm2≈0.4398 mWP_0 = I_0 A = 3.50\text{ mW/cm}^2 \times 0.1257\text{ cm}^2 \approx 0.4398\text{ mW}

    You correctly multiplied the incident irradiance by the cross-sectional area, but this step inherited the incorrect area from Step 2.

  4. Step 4

    P1=P02=0.8797 mWP_1 = \frac{P_0}{2} = 0.8797\text{ mW}

    Correct

    P1=P02=0.4398 mW2≈0.2199 mWP_1 = \frac{P_0}{2} = \frac{0.4398\text{ mW}}{2} \approx 0.2199\text{ mW}

    You correctly applied the one-half rule for unpolarized light striking the first linear polarizer, but the numerical value was affected by the earlier area calculation.

  5. Step 5

    P2=P1×cos⁡2(25.0∘)=0.8797 mW×0.8214=0.723 mWP_2 = P_1 \times \cos^2(25.0^\circ) = 0.8797\text{ mW} \times 0.8214 = 0.723\text{ mW}

    Correct

    P2=P1cos⁡2(25.0∘)=0.2199 mW×0.8214≈0.180 mWP_2 = P_1 \cos^2(25.0^\circ) = 0.2199\text{ mW} \times 0.8214 \approx 0.180\text{ mW}

    You correctly applied Malus's law with θ=25.0∘\theta = 25.0^\circ, but the propagated area error led to an incorrect final power.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted millimeters to centimeters accurately.

You correctly calculated the incident radiant power from the irradiance and aperture area.

You correctly applied the one-half rule for unpolarized light passing through the first polarizer.

You correctly evaluated and applied Malus's law for the light emerging from the second polarizer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometry Formula Confusion

You substituted the aperture's diameter directly into πd2\pi d^2 rather than dividing the diameter by 22 to find the radius.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the radius rr with the diameter dd in the formula for the area of a circle, writing A=πd2A = \pi d^2 instead of A=πr2=π4d2A = \pi r^2 = \frac{\pi}{4}d^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Aperture Area Formula
  • The area of a circle with diameter dd is A=πr2=π(d2)2=π4d2A = \pi r^2 = \pi \left(\frac{d}{2}\right)^2 = \frac{\pi}{4}d^2, not πd2\pi d^2.

  • Always write down r=d/2r = d / 2 explicitly before calculating the area, or use A=π4d2A = \frac{\pi}{4}d^2 directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the radius from the diameter: r=d2=0.400 cm2=0.200 cmr = \frac{d}{2} = \frac{0.400\text{ cm}}{2} = 0.200\text{ cm}.

  2. Compute the correct aperture area: A=πr2=π(0.200 cm)2≈0.1257 cm2A = \pi r^2 = \pi (0.200\text{ cm})^2 \approx 0.1257\text{ cm}^2.

  3. Compute the total incident power: P0=I0A=3.50 mW/cm2×0.1257 cm2≈0.4398 mWP_0 = I_0 A = 3.50\text{ mW/cm}^2 \times 0.1257\text{ cm}^2 \approx 0.4398\text{ mW}.

  4. Apply the one-half rule for the first polarizer: P1=12P0≈0.2199 mWP_1 = \frac{1}{2}P_0 \approx 0.2199\text{ mW}.

  5. Apply Malus's law for the second polarizer: P2=P1cos⁡2(25.0∘)=0.2199 mW×0.8214≈0.180 mWP_2 = P_1 \cos^2(25.0^\circ) = 0.2199\text{ mW} \times 0.8214 \approx 0.180\text{ mW}.

Final answer

0.180 mW0.180\text{ mW}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting given diameters to radii as the very first line of scratch work whenever geometric cross-sections appear.

  • Double-check dimensional factors of 2 and 4 when squaring radial or diametral terms in power and flux calculations.

Lock it in

Similar question

01

A beam of unpolarized light with an intensity of 16.0 W/m216.0\text{ W/m}^2 is incident normally on a pair of ideal polarizers whose transmission axes form an angle of 45.0∘45.0^\circ. What is the intensity of the light emerging from the second polarizer?

Answer

4.00 W/m24.00\text{ W/m}^2. After the first polarizer, I1=12I0=8.00 W/m2I_1 = \frac{1}{2} I_0 = 8.00\text{ W/m}^2. After the second polarizer, I2=I1cos⁡2(45.0∘)=8.00×0.500=4.00 W/m2I_2 = I_1 \cos^2(45.0^\circ) = 8.00 \times 0.500 = 4.00\text{ W/m}^2.

02

Unpolarized light of power P0=12.0 mWP_0 = 12.0\text{ mW} passes through three consecutive ideal linear polarizers. The second polarizer is oriented at 30.0∘30.0^\circ relative to the first, and the third polarizer is oriented at 30.0∘30.0^\circ relative to the second (so 60.0∘60.0^\circ relative to the first). Find the radiant power exiting the third polarizer.

Answer

3.38 mW3.38\text{ mW}. After the first polarizer: P1=12P0=6.00 mWP_1 = \frac{1}{2}P_0 = 6.00\text{ mW}. After the second: P2=P1cos⁡2(30.0∘)=6.00×0.75=4.50 mWP_2 = P_1 \cos^2(30.0^\circ) = 6.00 \times 0.75 = 4.50\text{ mW}. After the third: P3=P2cos⁡2(30.0∘)=4.50×0.75=3.375 mW≈3.38 mWP_3 = P_2 \cos^2(30.0^\circ) = 4.50 \times 0.75 = 3.375\text{ mW} \approx 3.38\text{ mW}.

03

An unpolarized laser beam with power P0P_0 passes through two polarizers and emerges with power P=0.125P0P = 0.125 P_0. What is the angle θ\theta between the transmission axes of the two polarizers?

Answer

60.0∘60.0^\circ. The transmitted power is P=12P0cos⁡2θP = \frac{1}{2} P_0 \cos^2\theta. Setting 12P0cos⁡2θ=0.125P0\frac{1}{2} P_0 \cos^2\theta = 0.125 P_0 gives cos⁡2θ=0.25\cos^2\theta = 0.25, so cos⁡θ=0.5\cos\theta = 0.5, which yields θ=60.0∘\theta = 60.0^\circ.

Loading workspace…