Resources

In an introductory physics laboratory experiment, a student uses a rotational sensor apparatus consisting of a disk with an unknown moment of inertia I0I_0 mounted on a low-friction vertical axle. A light string is wrapped around a concentric axle pulley of radius r=0.0200 mr = 0.0200\text{ m} and routed over an ideal, frictionless pulley to a hanging mass of m=0.150 kgm = 0.150\text{ kg}. The mass is released from rest and descends vertically through a distance of y=0.850 my = 0.850\text{ m} under gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2). A photogate measures the downward linear speed of the hanging mass at the bottom of the drop to be v=0.380 m/sv = 0.380\text{ m/s}. Assuming string stretch, string mass, and bearing friction are negligible, use conservation of energy to determine the rotational kinetic energy KrotK_{\text{rot}} of the rotating disk assembly at the instant the mass has fallen 0.850 m0.850\text{ m}.

Answer and steps

Final answer

Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}

Steps

01

Identify the initial and final energy of the system

To find the rotational kinetic energy of the disk assembly, we can apply the principle of conservation of mechanical energy to the system consisting of the hanging mass, the string, the disk assembly, and Earth.

Because friction and string mass are negligible, non-conservative forces do no work on the system: Ei=EfE_i = E_f

Choose the reference height (y=0y = 0) for gravitational potential energy at the lowest point of the mass's descent:

  • Initial state (at rest, before release):

    • Kinetic energy: Ki=0K_i = 0
    • Potential energy: Ui=mgyU_i = mgy
    • Total initial energy: Ei=mgyE_i = mgy
  • Final state (after the mass falls a distance yy):

    • Gravitational potential energy: Uf=0U_f = 0
    • Translational kinetic energy of the falling mass: Ktrans=12mv2K_{\text{trans}} = \frac{1}{2}mv^2
    • Rotational kinetic energy of the disk assembly: KrotK_{\text{rot}}
    • Total final energy: Ef=Ktrans+Krot=12mv2+KrotE_f = K_{\text{trans}} + K_{\text{rot}} = \frac{1}{2}mv^2 + K_{\text{rot}}

02

Formulate the energy conservation equation

Setting Ei=EfE_i = E_f: mgy=12mv2+Krotmgy = \frac{1}{2}mv^2 + K_{\text{rot}}

Solving for KrotK_{\text{rot}}: Krot=mgy−12mv2K_{\text{rot}} = mgy - \frac{1}{2}mv^2

Pitfall to Avoid: You do not need to calculate the angular speed ω=vr\omega = \frac{v}{r} or the moment of inertia I0I_0. While Krot=12I0ω2K_{\text{rot}} = \frac{1}{2}I_0\omega^2, energy conservation directly yields the rotational kinetic energy from the difference between the lost potential energy and the acquired translational kinetic energy.


03

Substitute the given values

  • Mass of the hanging weight: m=0.150 kgm = 0.150\text{ kg}
  • Acceleration due to gravity: g=9.80 m/s2g = 9.80\text{ m/s}^2
  • Vertical drop: y=0.850 my = 0.850\text{ m}
  • Downward speed: v=0.380 m/sv = 0.380\text{ m/s}

Calculate the loss in gravitational potential energy: mgy=(0.150 kg)(9.80 m/s2)(0.850 m)=1.2495 Jmgy = (0.150\text{ kg})(9.80\text{ m/s}^2)(0.850\text{ m}) = 1.2495\text{ J}

Calculate the translational kinetic energy of the mass: 12mv2=12(0.150 kg)(0.380 m/s)2=0.075 kg⋅0.1444 m2/s2≈0.01083 J\frac{1}{2}mv^2 = \frac{1}{2}(0.150\text{ kg})(0.380\text{ m/s})^2 = 0.075\text{ kg} \cdot 0.1444\text{ m}^2/\text{s}^2 \approx 0.01083\text{ J}

Now subtract KtransK_{\text{trans}} from the potential energy drop: Krot=1.2495 J−0.01083 J=1.23867 JK_{\text{rot}} = 1.2495\text{ J} - 0.01083\text{ J} = 1.23867\text{ J}

Rounding to three significant figures gives: Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the rotational kinetic energy directly to the total lost potential energy, omitting the translational kinetic energy of the falling mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=m⋅g⋅y  ⟹  ΔU=(0.150)(9.80)(0.850)=1.2495 J\Delta U = m \cdot g \cdot y \implies \Delta U = (0.150)(9.80)(0.850) = 1.2495\text{ J}

  2. Step 2

    Krot=ΔU=1.25 JK_{\text{rot}} = \Delta U = 1.25\text{ J}

    Correct

    Krot=ΔU−12mv2=1.2495 J−0.01083 J≈1.24 JK_{\text{rot}} = \Delta U - \frac{1}{2}mv^2 = 1.2495\text{ J} - 0.01083\text{ J} \approx 1.24\text{ J}

    As the mass descends, it gains downward linear speed vv, so part of the released gravitational potential energy becomes translational kinetic energy Ktrans=12mv2K_{\text{trans}} = \frac{1}{2}mv^2. Conservation of mechanical energy requires ΔU=Krot+Ktrans\Delta U = K_{\text{rot}} + K_{\text{trans}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the energy driving the system comes from the loss of gravitational potential energy of the falling mass.

You accurately calculated the gravitational potential energy drop ΔU=1.2495 J\Delta U = 1.2495\text{ J} using the given values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted translational kinetic energy in connected system

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed all lost gravitational potential energy goes entirely into rotating the disk, overlooking that the falling hanging mass is also moving and therefore possesses translational kinetic energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify all moving bodies in the final state
  • When a system with multiple objects is released from rest, mechanical energy is shared among all parts that are in motion at the final instant: ΔUtotal=∑Kf\Delta U_{\text{total}} = \sum K_f.

  • List every moving part at the end of the motion and write its corresponding kinetic energy term (translational 12mv2\frac{1}{2}mv^2 and/or rotational 12Iω2\frac{1}{2}I\omega^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Account for the translational kinetic energy of the falling mass: Ktrans=12mv2=12(0.150 kg)(0.380 m/s)2≈0.01083 JK_{\text{trans}} = \frac{1}{2}mv^2 = \frac{1}{2}(0.150\text{ kg})(0.380\text{ m/s})^2 \approx 0.01083\text{ J}.

  2. Apply conservation of mechanical energy: ΔU=Krot+Ktrans\Delta U = K_{\text{rot}} + K_{\text{trans}}.

  3. Solve for rotational kinetic energy: Krot=ΔU−Ktrans=1.2495 J−0.01083 J=1.23867 JK_{\text{rot}} = \Delta U - K_{\text{trans}} = 1.2495\text{ J} - 0.01083\text{ J} = 1.23867\text{ J}.

Final answer

Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • When applying conservation of energy to connected rotational systems, write out an explicit energy inventory showing both translational and rotational kinetic energy terms before substituting numbers.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the linear velocity when calculating the translational kinetic energy of the hanging mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m⋅g⋅y=Ktrans+Krot  ⟹  m⋅g⋅y=(0.150)(9.80)(0.850)=1.2495 Jm \cdot g \cdot y = K_{\text{trans}} + K_{\text{rot}} \implies m \cdot g \cdot y = (0.150)(9.80)(0.850) = 1.2495\text{ J}

  2. Step 2

    Ktrans=12⋅m⋅v=0.5⋅(0.150)⋅(0.380)=0.0285 JK_{\text{trans}} = \frac{1}{2} \cdot m \cdot v = 0.5 \cdot (0.150) \cdot (0.380) = 0.0285\text{ J}

    Correct

    Ktrans=12mv2=0.5⋅(0.150 kg)⋅(0.380 m/s)2≈0.01083 JK_{\text{trans}} = \frac{1}{2}mv^2 = 0.5 \cdot (0.150\text{ kg}) \cdot (0.380\text{ m/s})^2 \approx 0.01083\text{ J}

    You wrote the formula for translational kinetic energy as 12mv\frac{1}{2}mv instead of 12mv2\frac{1}{2}mv^2, forgetting to square the linear speed vv.

  3. Step 3

    Krot=1.2495−0.0285=1.221 JK_{\text{rot}} = 1.2495 - 0.0285 = 1.221\text{ J}

    Correct

    Krot=1.2495 J−0.01083 J≈1.24 JK_{\text{rot}} = 1.2495\text{ J} - 0.01083\text{ J} \approx 1.24\text{ J}

    Your subtraction followed logically from your previous calculation, but it inherited the error from the unsquared velocity in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the total mechanical energy of the system is conserved.

You accurately computed the change in gravitational potential energy mgymgy with the given values.

You correctly isolated KrotK_{\text{rot}} as the difference between the total energy drop and the translational kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Velocity Exponent in Kinetic Energy

You omitted the square exponent on speed when calculating translational kinetic energy, writing 12mv\frac{1}{2}mv rather than 12mv2\frac{1}{2}mv^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A quick formula recall slip between momentum-like terms and kinetic energy, overlooking that kinetic energy depends on the square of speed (v2v^2), which also alters the dimensional units from kg⋅m/s\text{kg}\cdot\text{m/s} (momentum) to J=kg⋅m2/s2\text{J} = \text{kg}\cdot\text{m}^2/\text{s}^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Kinetic Energy Exponent
  • Translational kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, never 12mv\frac{1}{2}mv.

  • Always verify that your speed variable has an exponent of 22 both when writing the algebraic formula and when entering numbers into your calculator.

Dimensional / Unit Consistency Check
  • Energy has dimensions of mass ×\times speed2^2 (kg⋅m2/s2=J\text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}).

  • Notice that 12mv\frac{1}{2}mv produces units of kg⋅m/s\text{kg}\cdot\text{m/s}, which is momentum, not energy.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate translational kinetic energy with the squared speed: Ktrans=12(0.150 kg)(0.380 m/s)2=0.5×0.150×0.1444=0.01083 JK_{\text{trans}} = \frac{1}{2}(0.150\text{ kg})(0.380\text{ m/s})^2 = 0.5 \times 0.150 \times 0.1444 = 0.01083\text{ J}.

  2. Subtract the corrected KtransK_{\text{trans}} from the potential energy drop: Krot=1.2495 J−0.01083 J=1.23867 JK_{\text{rot}} = 1.2495\text{ J} - 0.01083\text{ J} = 1.23867\text{ J}.

  3. Round to three significant figures: Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}.

Final answer

Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that all kinetic energy expressions (K=12mv2K = \frac{1}{2}mv^2 and Krot=12Iω2K_{\text{rot}} = \frac{1}{2}I\omega^2) include the squared motion variable.

  • Perform a quick dimensional check whenever calculating energy terms to confirm that speed or velocity is squared.

OverviewACEpath Teacher's Diagnosis

03 The student adds the translational kinetic energy to the potential energy instead of subtracting it from the total energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔU=(0.150)(9.80)(0.850)=1.2495 J\Delta U = (0.150)(9.80)(0.850) = 1.2495\text{ J}

  2. Step 2

    Ktrans=(12)(0.150)(0.380)2=0.0108 JK_{\text{trans}} = \left(\frac{1}{2}\right)(0.150)(0.380)^2 = 0.0108\text{ J}

  3. Step 3

    Krot=ΔU+KtransK_{\text{rot}} = \Delta U + K_{\text{trans}}

    Correct

    Krot=mgy−KtransK_{\text{rot}} = mgy - K_{\text{trans}}

    You set the rotational kinetic energy equal to the sum of the potential energy drop and the translational kinetic energy. Because the system starts from rest, the total initial energy is purely gravitational potential energy (mgymgy). That initial potential energy is split into translational and rotational kinetic energy at the bottom (mgy=Ktrans+Krotmgy = K_{\text{trans}} + K_{\text{rot}}), so you need to subtract KtransK_{\text{trans}} from mgymgy.

  4. Step 4

    Krot=1.2495+0.0108=1.260 JK_{\text{rot}} = 1.2495 + 0.0108 = 1.260\text{ J}

    Correct

    Krot=1.2495 J−0.0108 J≈1.24 JK_{\text{rot}} = 1.2495\text{ J} - 0.0108\text{ J} \approx 1.24\text{ J}

    This numerical result directly carries over the addition error from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the formula for gravitational potential energy drop, mgymgy.

You accurately computed the translational kinetic energy using Ktrans=12mv2K_{\text{trans}} = \frac{1}{2}mv^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Energy conservation sign error

You treated the translational kinetic energy as an additional energy source rather than a final energy destination alongside rotational kinetic energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the energy source with the energy products when setting up the work-energy budget. In an isolated system released from rest, the lost potential energy is the total budget that gets divided between translational and rotational kinetic energy (Ei=Ef  ⟹  ΔUloss=Ktrans+KrotE_i = E_f \implies \Delta U_{\text{loss}} = K_{\text{trans}} + K_{\text{rot}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Total Energy In vs. Total Energy Out
  • Before substituting numbers, write the explicit conservation equation Ei=EfE_i = E_f or ΔK+ΔU=0\Delta K + \Delta U = 0.

  • State which energy forms exist at the start (Ei=mgyE_i = mgy) and at the end (Ef=Ktrans+KrotE_f = K_{\text{trans}} + K_{\text{rot}}), then isolate the unknown variable symbolically.

Sanity Check on Energy Bounds
  • In a free-fall release without driving forces, no final kinetic energy term can exceed the total initial potential energy.

  • Notice that your calculated value 1.260 J1.260\text{ J} exceeds the entire available potential energy (1.2495 J1.2495\text{ J}), which signals an addition error.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total mechanical energy conservation statement: Ei=EfE_i = E_f.

  2. Substitute the initial and final energy states: mgy=Ktrans+Krotmgy = K_{\text{trans}} + K_{\text{rot}}.

  3. Rearrange to solve for rotational kinetic energy: Krot=mgy−KtransK_{\text{rot}} = mgy - K_{\text{trans}}.

  4. Substitute the calculated values: Krot=1.2495 J−0.01083 J=1.23867 JK_{\text{rot}} = 1.2495\text{ J} - 0.01083\text{ J} = 1.23867\text{ J}.

Final answer

Krot=1.24 JK_{\text{rot}} = 1.24\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy bar-chart concept: visualize a full bar of potential energy UU converting into two smaller bars, KtransK_{\text{trans}} and KrotK_{\text{rot}}.

  • Always write down the full symbolic conservation statement Ei=EfE_i = E_f before moving terms around or plugging in numerical values.

  • Practice checking whether any component of final kinetic energy exceeds the total initial mechanical energy of the system.

Lock it in

Similar question

01

A hanging mass of m=0.200 kgm = 0.200\text{ kg} is released from rest and falls vertically through h=1.20 mh = 1.20\text{ m}, spinning a flywheel. At the end of the fall, the mass has a linear speed of v=0.500 m/sv = 0.500\text{ m/s}. Assuming negligible friction and using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the rotational kinetic energy of the flywheel.

Answer

Krot=2.33 JK_{\text{rot}} = 2.33\text{ J}. Key steps: ΔU=mgh=(0.200)(9.80)(1.20)=2.352 J\Delta U = mgh = (0.200)(9.80)(1.20) = 2.352\text{ J}. Ktrans=12mv2=12(0.200)(0.500)2=0.025 JK_{\text{trans}} = \frac{1}{2}mv^2 = \frac{1}{2}(0.200)(0.500)^2 = 0.025\text{ J}. Then Krot=ΔU−Ktrans=2.352−0.025=2.327 J≈2.33 JK_{\text{rot}} = \Delta U - K_{\text{trans}} = 2.352 - 0.025 = 2.327\text{ J} \approx 2.33\text{ J}.

02

A light cord wrapped around a wheel of unknown inertia supports a bucket of mass m=1.50 kgm = 1.50\text{ kg}. The bucket drops from rest through a distance of 2.00 m2.00\text{ m} (g=9.80 m/s2g = 9.80\text{ m/s}^2). If the wheel gains 26.4 J26.4\text{ J} of rotational kinetic energy, what is the downward speed of the bucket at that instant?

Answer

v=2.00 m/sv = 2.00\text{ m/s}. Key steps: ΔU=mgy=(1.50)(9.80)(2.00)=29.4 J\Delta U = mgy = (1.50)(9.80)(2.00) = 29.4\text{ J}. By conservation of energy, Ktrans=ΔU−Krot=29.4 J−26.4 J=3.00 JK_{\text{trans}} = \Delta U - K_{\text{rot}} = 29.4\text{ J} - 26.4\text{ J} = 3.00\text{ J}. Since Ktrans=12mv2K_{\text{trans}} = \frac{1}{2}mv^2, we have 12(1.50)v2=3.00  ⟹  v2=4.00  ⟹  v=2.00 m/s\frac{1}{2}(1.50)v^2 = 3.00 \implies v^2 = 4.00 \implies v = 2.00\text{ m/s}.

03

A hanging cylinder of mass mm falls through height hh, unwinding a string from a disk of radius RR and moment of inertia I=3mR2I = 3mR^2. If the string does not slip, express the final rotational kinetic energy KrotK_{\text{rot}} strictly in terms of mm, gg, and hh.

Answer

Krot=34mghK_{\text{rot}} = \frac{3}{4}mgh. Key steps: No-slip condition gives v=ωRv = \omega R, so Krot=12Iω2=12(3mR2)(vR)2=32(12mv2)=3KtransK_{\text{rot}} = \frac{1}{2}I\omega^2 = \frac{1}{2}(3mR^2)\left(\frac{v}{R}\right)^2 = \frac{3}{2}\left(\frac{1}{2}mv^2\right) = 3 K_{\text{trans}}. Total energy conservation gives mgh=Ktrans+Krot=13Krot+Krot=43Krotmgh = K_{\text{trans}} + K_{\text{rot}} = \frac{1}{3}K_{\text{rot}} + K_{\text{rot}} = \frac{4}{3}K_{\text{rot}}, so Krot=34mghK_{\text{rot}} = \frac{3}{4}mgh.

Loading workspace…