Resources

During a bomb calorimetry experiment to determine the heat of combustion of benzoic acid, a digital thermistor calibrated in degrees Fahrenheit records an initial water bath temperature of Ti=69.80∘FT_i = 69.80^\circ\text{F} and a maximum post-combustion temperature of Tf=76.55∘FT_f = 76.55^\circ\text{F}. (a) Calculate the measured temperature rise in degrees Fahrenheit (ΔTF\Delta T_\text{F}). (b) Convert this temperature difference directly into degrees Celsius (ΔTC\Delta T_\text{C}) and kelvins (ΔTK\Delta T_\text{K}). (c) If the effective heat capacity of the calorimeter assembly is Ccal=10.45 kJ/KC_\text{cal} = 10.45\text{ kJ/K}, calculate the total heat released by the reaction (q=CcalΔTKq = C_\text{cal}\Delta T_\text{K}) in kilojoules (kJ\text{kJ}). Round all calculated values to four significant figures.

Answer and steps

Final answer

(a) ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}; (b) ΔTC=3.750∘C\Delta T_\text{C} = 3.750^\circ\text{C}, ΔTK=3.750 K\Delta T_\text{K} = 3.750\text{ K}; (c) q=39.19 kJq = 39.19\text{ kJ}

Steps

Part (a): Temperature Rise in Degrees Fahrenheit

The change in temperature, ΔTF\Delta T_\text{F}, is the difference between the final temperature TfT_f and the initial temperature TiT_i:

ΔTF=Tf−Ti\Delta T_\text{F} = T_f - T_i

Substitute the given values:

ΔTF=76.55∘F−69.80∘F=6.750∘F\Delta T_\text{F} = 76.55^\circ\text{F} - 69.80^\circ\text{F} = 6.750^\circ\text{F}


Part (b): Converting Temperature Difference to Celsius and Kelvins

When converting a temperature interval (or temperature difference, ΔT\Delta T) rather than a single specific temperature reading, the additive zero-point offsets cancel out:

  • Between the freezing point (32∘F/0∘C32^\circ\text{F} / 0^\circ\text{C}) and boiling point (212∘F/100∘C212^\circ\text{F} / 100^\circ\text{C}) of water, there are 180180 Fahrenheit degrees for every 100100 Celsius degrees.
  • Therefore, the scale factor for a temperature change is: ΔTC=59ΔTF\Delta T_\text{C} = \frac{5}{9} \Delta T_\text{F}

Substitute ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}:

ΔTC=59×6.750∘F=3.750∘C\Delta T_\text{C} = \frac{5}{9} \times 6.750^\circ\text{F} = 3.750^\circ\text{C}

Because the magnitude of one kelvin is defined to be identical to that of one degree Celsius (1 K=1∘C1\text{ K} = 1^\circ\text{C} in interval size), an interval in kelvins equals the interval in degrees Celsius:

ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}

Common Pitfall: Do not apply the single-point conversion formulas TC=59(TF−32)T_\text{C} = \frac{5}{9}(T_\text{F} - 32) or TK=TC+273.15T_\text{K} = T_\text{C} + 273.15 to temperature differences. The constant offsets (3232 and 273.15273.15) represent fixed reference shifts that disappear when subtracting two temperatures on the same scale: (T2+273.15)−(T1+273.15)=T2−T1(T_2 + 273.15) - (T_1 + 273.15) = T_2 - T_1.


Part (c): Total Heat Released by the Reaction

The heat absorbed by the calorimeter (and thus released by the combustion reaction) is given by:

q=CcalΔTKq = C_\text{cal} \Delta T_\text{K}

Substitute the calorimeter heat capacity Ccal=10.45 kJ/KC_\text{cal} = 10.45\text{ kJ/K} and the temperature change ΔTK=3.750 K\Delta T_\text{K} = 3.750\text{ K}:

q=(10.45 kJ/K)×(3.750 K)=39.1875 kJq = (10.45\text{ kJ/K}) \times (3.750\text{ K}) = 39.1875\text{ kJ}

Rounding to four significant figures yields:

q=39.19 kJq = 39.19\text{ kJ}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student mistakenly treats a temperature interval as an absolute temperature and applies the full conversion formula including the 32° offset.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTF=76.55−69.80=6.750∘F\Delta T_\text{F} = 76.55 - 69.80 = 6.750^\circ\text{F}

  2. Step 2

    ΔTC=(59)×(ΔTF−32)=(59)×(6.750−32)=−14.03∘C\Delta T_\text{C} = \left(\frac{5}{9}\right) \times (\Delta T_\text{F} - 32) = \left(\frac{5}{9}\right) \times (6.750 - 32) = -14.03^\circ\text{C}

    Correct

    ΔTC=59ΔTF=59×6.750∘F=3.750∘C\Delta T_\text{C} = \frac{5}{9} \Delta T_\text{F} = \frac{5}{9} \times 6.750^\circ\text{F} = 3.750^\circ\text{C}

    You applied the single-point temperature formula TC=59(TF−32)T_\text{C} = \frac{5}{9}(T_\text{F} - 32) instead of scaling the temperature change directly. For a difference ΔT\Delta T, the constant offset 32∘F32^\circ\text{F} cancels out, leaving ΔTC=59ΔTF\Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F}.

  3. Step 3

    ΔTK=−14.03+273.15=259.1 K\Delta T_\text{K} = -14.03 + 273.15 = 259.1\text{ K}

    Correct

    ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}

    You added the absolute zero offset 273.15273.15 to a temperature change. Because one kelvin represents the exact same interval size as one degree Celsius, any temperature difference satisfies ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C} without adding 273.15273.15.

  4. Step 4

    q=10.45×259.1=2708 kJq = 10.45 \times 259.1 = 2708\text{ kJ}

    Correct

    q=CcalΔTK=(10.45 kJ/K)(3.750 K)=39.19 kJq = C_\text{cal} \Delta T_\text{K} = (10.45\text{ kJ/K})(3.750\text{ K}) = 39.19\text{ kJ}

    You followed the correct relationship q=CcalΔTKq = C_\text{cal}\Delta T_\text{K}, but your result was distorted by substituting the incorrect value of ΔTK\Delta T_\text{K}.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the Fahrenheit temperature difference accurately.

You correctly identified and applied the calorimetric relation q=CcalΔTq = C_\text{cal}\Delta T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature interval vs. absolute temperature conversion

You used single-temperature point conversion formulas involving reference offsets instead of interval conversion factors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing an absolute temperature reading TT with a temperature change ΔT\Delta T. An absolute temperature requires shifting the reference zero point (such as subtracting 3232 or adding 273.15273.15), whereas a difference ΔT=T2−T1\Delta T = T_2 - T_1 cancels any constant zero-point offset and depends solely on the relative unit size (1∘C=1 K=1.8∘F1^\circ\text{C} = 1\text{ K} = 1.8^\circ\text{F}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check interval vs. point
  • For absolute values: TC=59(TF−32)T_\text{C} = \frac{5}{9}(T_\text{F}-32) and TK=TC+273.15T_\text{K} = T_\text{C} + 273.15. For intervals: ΔTC=59ΔTF\Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F} and ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C}.

  • Whenever a problem specifies ΔT\Delta T, temperature rise, or heat transfer q=CΔTq = C\Delta T, never add or subtract 3232 or 273.15273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the Fahrenheit temperature rise to Celsius using only the ratio factor: ΔTC=59×6.750∘F=3.750∘C\Delta T_\text{C} = \frac{5}{9} \times 6.750^\circ\text{F} = 3.750^\circ\text{C}.

  2. Equate the Kelvin interval directly to the Celsius interval: ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}.

  3. Calculate the reaction heat: q=(10.45 kJ/K)×(3.750 K)=39.1875 kJ≈39.19 kJq = (10.45\text{ kJ/K}) \times (3.750\text{ K}) = 39.1875\text{ kJ} \approx 39.19\text{ kJ}.

Final answer

(a) ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}; (b) ΔTC=3.750∘C\Delta T_\text{C} = 3.750^\circ\text{C}, ΔTK=3.750 K\Delta T_\text{K} = 3.750\text{ K}; (c) q=39.19 kJq = 39.19\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the interval scaling rules: ΔTK=ΔTC=59ΔTF\Delta T_\text{K} = \Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F}.

  • Practice identifying whether a temperature quantity represents a state point or an interval before selecting a formula.

OverviewACEpath Teacher's Diagnosis

02 A student correctly converts the temperature interval to Celsius but adds 273.15 when converting the interval to kelvins.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTF=76.55−69.80=6.750∘F\Delta T_F = 76.55 - 69.80 = 6.750^\circ\text{F}

  2. Step 2

    ΔTC=59×6.750=3.750∘C\Delta T_C = \frac{5}{9} \times 6.750 = 3.750^\circ\text{C}

  3. Step 3

    ΔTK=3.750+273.15=276.9 K\Delta T_K = 3.750 + 273.15 = 276.9\text{ K}

    Correct

    ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}

    You applied the absolute temperature offset +273.15+273.15 to a temperature change. A step of 1∘C1^\circ\text{C} is identical in size to a step of 1 K1\text{ K}, so a difference of 3.750∘C3.750^\circ\text{C} is directly equal to 3.750 K3.750\text{ K}.

  4. Step 4

    q=10.45×276.9=2894 kJq = 10.45 \times 276.9 = 2894\text{ kJ}

    Correct

    q=CcalΔTK=(10.45 kJ/K)(3.750 K)=39.19 kJq = C_\text{cal}\Delta T_\text{K} = (10.45\text{ kJ/K})(3.750\text{ K}) = 39.19\text{ kJ}

    Your calculation used the correct formula q=CcalΔTq = C_\text{cal}\Delta T, but the result was propagated from the incorrect kelvin value in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the initial temperature difference in degrees Fahrenheit correctly.

You appropriately omitted the 32∘F32^\circ\text{F} zero-point shift when converting the interval ΔTF\Delta T_\text{F} to ΔTC\Delta T_\text{C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature interval vs. absolute temperature confusion

You treated a temperature interval ΔT\Delta T as an absolute temperature reading TT when converting to kelvins.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing point temperatures with temperature differences. Adding 273.15273.15 is only necessary when shifting the zero-point of a specific reading (TK=TC+273.15T_\text{K} = T_\text{C} + 273.15). Because the size of one degree Celsius is identical to one kelvin, the constant offset cancels out when subtracting two temperatures: (T2+273.15)−(T1+273.15)=T2−T1(T_2 + 273.15) - (T_1 + 273.15) = T_2 - T_1, making ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the delta symbol
  • If the quantity is ΔT\Delta T (a change or difference), do not add or subtract reference zero offsets like 3232 or 273.15273.15.

  • Whenever you see ΔTC\Delta T_\text{C}, set ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C} directly without adding 273.15273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the kelvin temperature change equal to the Celsius change: ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}.

  2. Substitute into the heat formula: q=CcalΔTK=(10.45 kJ/K)(3.750 K)=39.1875 kJq = C_\text{cal}\Delta T_\text{K} = (10.45\text{ kJ/K})(3.750\text{ K}) = 39.1875\text{ kJ}.

  3. Round to four significant figures: q=39.19 kJq = 39.19\text{ kJ}.

Final answer

(a) ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}; (b) ΔTC=3.750∘C\Delta T_\text{C} = 3.750^\circ\text{C}, ΔTK=3.750 K\Delta T_\text{K} = 3.750\text{ K}; (c) q=39.19 kJq = 39.19\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between a temperature reading TT and a temperature change ΔT\Delta T.

  • Practice converting temperature intervals between ∘F^\circ\text{F}, ∘C^\circ\text{C}, and K\text{K} without applying zero-point shifts.

OverviewACEpath Teacher's Diagnosis

03 A student inverts the scale factor between Fahrenheit and Celsius degrees, multiplying ΔTF by 9/5 instead of 5/9.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔTF=76.55−69.80=6.750∘F\Delta T_\text{F} = 76.55 - 69.80 = 6.750^\circ\text{F}

  2. Step 2

    ΔTC=95×6.750=12.15∘C\Delta T_\text{C} = \frac{9}{5} \times 6.750 = 12.15^\circ\text{C}

    Correct

    ΔTC=59×6.750∘F=3.750∘C\Delta T_\text{C} = \frac{5}{9} \times 6.750^\circ\text{F} = 3.750^\circ\text{C}

    You inverted the scale factor between Fahrenheit and Celsius intervals. Since 100∘C100^\circ\text{C} corresponds to an interval of 180∘F180^\circ\text{F}, each degree Celsius is larger than a degree Fahrenheit, so converting from Fahrenheit to Celsius requires multiplying by 100180=59\frac{100}{180} = \frac{5}{9}.

  3. Step 3

    ΔTK=12.15 K\Delta T_\text{K} = 12.15\text{ K}

    Correct

    ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}

    You correctly recognized that a temperature difference in kelvins equals the temperature difference in degrees Celsius, but the numerical value was affected by your previous conversion error.

  4. Step 4

    q=10.45×12.15=127.0 kJq = 10.45 \times 12.15 = 127.0\text{ kJ}

    Correct

    q=CcalΔTK=(10.45 kJ/K)(3.750 K)=39.19 kJq = C_\text{cal}\Delta T_\text{K} = (10.45\text{ kJ/K})(3.750\text{ K}) = 39.19\text{ kJ}

    You correctly applied the heat capacity formula q=CcalΔTKq = C_\text{cal}\Delta T_\text{K} and rounded to four significant figures, but the result was affected by the incorrect value of ΔTK\Delta T_\text{K}.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately calculated the temperature rise in degrees Fahrenheit as ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}.

You correctly identified that a temperature interval in kelvins is numerically equal to the interval in degrees Celsius (ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C}).

You correctly applied the calorimetric relation q=CcalΔTKq = C_\text{cal}\Delta T_\text{K} and maintained proper significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted scale factor for temperature interval conversion

Multiplying ΔTF\Delta T_\text{F} by 95\frac{9}{5} instead of 59\frac{5}{9} when converting a temperature difference to Celsius.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of the unit size ratio: because 1∘C1^\circ\text{C} is a larger temperature step than 1∘F1^\circ\text{F} (100∘C100^\circ\text{C} spans the same range as 180∘F180^\circ\text{F}), an interval in Celsius must have a smaller numerical value than the same interval in Fahrenheit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check Unit Sizes
  • Between water's freezing and boiling points, ΔT=100∘C=180∘F\Delta T = 100^\circ\text{C} = 180^\circ\text{F}. Therefore, 1∘C=1.8∘F=95∘F1^\circ\text{C} = 1.8^\circ\text{F} = \frac{9}{5}^\circ\text{F}.

  • When converting an interval from Fahrenheit to Celsius, the number must get smaller, so multiply by 59\frac{5}{9}.

Intervals vs. Absolute Readings
  • For a temperature difference, ΔTC=59ΔTF\Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F} and ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C}; never add or subtract 3232 or 273.15273.15 when dealing with ΔT\Delta T.

  • Always verify whether the problem asks for a specific reading TT or a temperature change ΔT\Delta T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the temperature interval to Celsius using the proper scale factor: ΔTC=59ΔTF=59(6.750∘F)=3.750∘C\Delta T_\text{C} = \frac{5}{9}\Delta T_\text{F} = \frac{5}{9}(6.750^\circ\text{F}) = 3.750^\circ\text{C}.

  2. Equate the Celsius interval directly to kelvins: ΔTK=ΔTC=3.750 K\Delta T_\text{K} = \Delta T_\text{C} = 3.750\text{ K}.

  3. Substitute ΔTK\Delta T_\text{K} into the heat equation: q=CcalΔTK=(10.45 kJ/K)(3.750 K)=39.1875 kJq = C_\text{cal}\Delta T_\text{K} = (10.45\text{ kJ/K})(3.750\text{ K}) = 39.1875\text{ kJ}.

  4. Round to four significant figures: q=39.19 kJq = 39.19\text{ kJ}.

Final answer

(a) ΔTF=6.750∘F\Delta T_\text{F} = 6.750^\circ\text{F}; (b) ΔTC=3.750∘C\Delta T_\text{C} = 3.750^\circ\text{C}, ΔTK=3.750 K\Delta T_\text{K} = 3.750\text{ K}; (c) q=39.19 kJq = 39.19\text{ kJ}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between converting a point temperature TT and a temperature difference ΔT\Delta T.

  • Practice using dimensional analysis to confirm that (∘F)×(5∘C9∘F)=∘C(^\circ\text{F}) \times \left(\frac{5^\circ\text{C}}{9^\circ\text{F}}\right) = {}^\circ\text{C}.

Lock it in

Similar question

01

A metal rod warms from 20.0∘C20.0^\circ\text{C} to 45.0∘C45.0^\circ\text{C}. Express the temperature change ΔT\Delta T in (a) kelvins and (b) degrees Fahrenheit.

Answer

(a) ΔT=45.0−20.0=25.0 K\Delta T = 45.0 - 20.0 = 25.0\text{ K}, since ΔTK=ΔTC\Delta T_\text{K} = \Delta T_\text{C}. (b) ΔTF=95ΔTC=95(25.0)=45.0∘F\Delta T_\text{F} = \frac{9}{5}\Delta T_\text{C} = \frac{9}{5}(25.0) = 45.0^\circ\text{F}.

02

An aluminum block with heat capacity C=450 J/KC = 450\text{ J/K} absorbs heat, causing its temperature to rise by 9.00∘F9.00^\circ\text{F}. Calculate the thermal energy qq absorbed by the block in joules.

Answer

First convert the interval: ΔTK=59ΔTF=59(9.00∘F)=5.00 K\Delta T_\text{K} = \frac{5}{9}\Delta T_\text{F} = \frac{5}{9}(9.00^\circ\text{F}) = 5.00\text{ K}. Then compute heat: q=CΔT=(450 J/K)(5.00 K)=2250 Jq = C\Delta T = (450\text{ J/K})(5.00\text{ K}) = 2250\text{ J}.

03

A liquid is cooled from Ti=158.0∘FT_i = 158.0^\circ\text{F} to Tf=104.0∘FT_f = 104.0^\circ\text{F}. Calculate the temperature drop in degrees Fahrenheit, degrees Celsius, and kelvins, and verify that converting the individual initial and final temperatures into Celsius yields the same ΔTC\Delta T_\text{C}.

Answer

ΔTF=104.0−158.0=−54.0∘F\Delta T_\text{F} = 104.0 - 158.0 = -54.0^\circ\text{F}. Direct scaling gives ΔTC=59(−54.0)=−30.0∘C\Delta T_\text{C} = \frac{5}{9}(-54.0) = -30.0^\circ\text{C} and ΔTK=−30.0 K\Delta T_\text{K} = -30.0\text{ K}. Verification: Ti,C=59(158.0−32)=70.0∘CT_{i,\text{C}} = \frac{5}{9}(158.0 - 32) = 70.0^\circ\text{C} and Tf,C=59(104.0−32)=40.0∘CT_{f,\text{C}} = \frac{5}{9}(104.0 - 32) = 40.0^\circ\text{C}; thus Tf,C−Ti,C=40.0−70.0=−30.0∘CT_{f,\text{C}} - T_{i,\text{C}} = 40.0 - 70.0 = -30.0^\circ\text{C}.

Loading workspace…