Resources
A crash-test dummy of mass in a sled moving in the positive -direction at is restrained by an airbag system that deploys upon impact. The airbag exerts a time-varying stopping force on the dummy given by the model along the -axis over the time interval , where the interaction duration is extended by the airbag deployment to , and the dummy comes to a complete rest at . (a) Determine the algebraic sign and numerical value of the total impulse delivered to the dummy. (b) Find the peak magnitude of the retarding force . (c) Evaluate the ratio of the peak retarding force to the equivalent constant average force over the same duration.
Answer and steps
Final answer
(a) , (b) , (c)
Steps
Part (a): Total Impulse Delivered to the Dummy
By the Impulse-Momentum Theorem, the net impulse acting on an object equals its change in linear momentum :
Given values:
- Initial velocity:
- Final velocity:
- Mass:
Substitute these values into the impulse equation:
The negative sign indicates that the impulse opposes the initial forward motion of the dummy.
Part (b): Peak Magnitude of the Retarding Force
The impulse is also the integral of the force over the collision duration :
Evaluate the integral:
Since and :
Equate the magnitude of impulse to and solve for :
Substitute and :
Part (c): Ratio of Peak Force to Average Force
The magnitude of the equivalent average force acting over the interval produces the same total impulse:
Therefore, the ratio of the peak retarding force to the magnitude of the average retarding force is:
Note: Because the force profile is sinusoidal rather than constant, the peak force exceeds the average force by roughly . This illustrates why vehicle safety systems aim to flatten the force curve as much as possible over an extended time interval.
Typical errors
01 The student forgets the factor of τ/π arising from the chain rule when integrating sin(πt/τ), resulting in an incorrect integrated impulse.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹ The sign of is negative.
- Step 2Correct
When integrating where , substitution requires dividing by the inner derivative , giving . Because you omitted , your integrated impulse was off by a factor of , resulting in instead of .
- Step 3Correct
Your definition and formula for average force were set up properly, but substituting your erroneous value of led to an incorrect ratio. As a physical sanity check, the peak of a half-sine curve must always exceed its average value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total impulse using the change in momentum.
You correctly stated the negative sign of the impulse.
You set up the integral definition of impulse and the formula for average force correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated as without dividing by the inner derivative .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMissing the reciprocal coefficient when integrating composite functions of the form , leading to missing units and dimensions in the resulting force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Chain Rule in Reverse (u-substitution)
For any constant , .
Always differentiate your antiderivative to confirm it returns the original integrand, checking that dimensions match.
- Peak vs. Average Force Sanity Check
For any non-negative pulse that varies in time, the peak value must be strictly greater than the average value .
Whenever you compute a ratio , verify that the resulting number is greater than .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the integral with the correct antiderivative: .
Evaluate at the limits: .
Equate to and solve for : .
Calculate the ratio to average force: , so .
(a) , (b) , (c)
02 The student treats the time-varying force as a simple linear ramp or triangular pulse, using an average factor of 1/2 instead of integrating the half-cycle sine wave.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You treated the force curve as a triangular pulse with area . Because the force follows a half-cycle sine wave, its area is obtained by integration, yielding rather than .
- Step 3Correct
Your definition of average force was correct, but substituting your previous value led to an incorrect numerical ratio of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the impulse-momentum theorem to determine the total stopping impulse.
You correctly computed the magnitude of the average force as the total impulse divided by the collision time interval.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the triangle area formula for a sinusoidal force-time curve.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that a time-varying force rising and falling over time can be approximated by a triangular area factor of , overlooking that integrating a half-period sine function over yields an average value of rather than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Impulse from Continuous Force Profiles
For any non-constant force , impulse is strictly defined as .
Set up and evaluate the definite integral of the given functional form instead of assuming simple geometric area formulas like triangles.
- Half-Cycle Sine Integration
The area under from to is .
Integrate to get .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the impulse magnitude equal to the integral of the sine force profile: .
Solve for the peak retarding force: .
Find the ratio of peak force to average force: .
(a) , (b) , (c)
03 The student confuses the sign of impulse by calculating initial minus final momentum, concluding the impulse on the dummy is positive.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
By the impulse-momentum theorem, impulse is the change in momentum: . Because the dummy comes to rest from a positive velocity, the change is negative. The airbag force opposes the forward motion, so the impulse delivered to the dummy must have a negative sign.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou integrated the half-sine force function accurately to relate impulse magnitude to peak force.
You accurately solved for the peak stopping force magnitude.
You correctly defined average force and evaluated the ratio of peak force to average force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou computed instead of the standard change .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated change in velocity as a positive difference (initial minus final) rather than the standard vector delta , obscuring the directional property of impulse as a vector that opposes forward motion.
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Delta
Any delta quantity is strictly defined as final value minus initial value: .
Always write explicitly before plugging in numerical values.
- Physical Direction Check
Net impulse shares the exact direction of the net force causing the acceleration or deceleration.
Check that a retarding or braking force in the negative direction yields a negative net impulse along that axis.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the impulse-momentum theorem: .
Substitute , , and : .
Confirm that the negative sign corresponds to the stopping force acting in the direction.
(a) (negative algebraic sign), (b) , (c)
Lock it in
What is the antiderivative of with respect to , where is a non-zero constant?
. Always divide by the constant coefficient when applying reverse chain rule.
Similar question
A force pulse acts on an object from to . If the collision duration is and the total delivered impulse is , find the peak force .
Answer
. Key steps: . Solving for : .
An advanced safety restraint produces a force profile over the interval . Determine the ratio of the peak force to the equivalent constant average force over this duration.
Answer
. Key steps: Total impulse is . The average force is . Thus, the ratio is .
A vehicle collides with a decelerating barrier that exerts a retarding force from to , bringing the vehicle from to rest at . Determine: (a) the total impulse , (b) the peak force magnitude , and (c) the ratio .
Answer
(a) , (b) , (c) . Key steps: (a) . (b) . Solving yields . (c) , so the ratio is .