Resources

A vertical sounding rocket burns out at an altitude of y0=75.0 my_0 = 75.0\text{ m} while traveling vertically upward at an initial post-burnout speed of v0=39.2 m/sv_0 = 39.2\text{ m/s}. Beyond burnout, the rocket is in purely unpowered vertical projectile free-fall under gravity (g=9.80 m/s2g = 9.80\text{ m/s}^2). Rather than finding the peak height or total flight duration, determine the two distinct clock times t1t_1 and t2t_2 measured from burnout at which the rocket's instantaneous speed ∣v(t)∣|v(t)| is exactly equal to 19.6 m/s19.6\text{ m/s} (half of its burnout speed).

Answer and steps

Final answer

t1=2.00 st_1 = 2.00\text{ s} (on the upward trajectory) and t2=6.00 st_2 = 6.00\text{ s} (on the downward trajectory)

Steps

01

Set Up the Kinematic Equation for Velocity

Choose the upward direction as the positive vertical axis (+y+y).

Once the rocket burns out, it undergoes free fall under the constant acceleration of gravity acting downward: a=−g=−9.80 m/s2a = -g = -9.80\text{ m/s}^2

The post-burnout velocity as a function of elapsed time tt is given by the standard linear kinematic equation: v(t)=v0−gtv(t) = v_0 - g t

Here, the initial velocity at burnout (t=0 st = 0\text{ s}) is v0=+39.2 m/sv_0 = +39.2\text{ m/s}.


02

Interpret the Condition on Instantaneous Speed

The problem asks for the times when the speed (the magnitude of velocity, ∣v(t)∣|v(t)|) is equal to 19.6 m/s19.6\text{ m/s}.

Because speed does not specify direction, there are two distinct velocity states:

  1. Moving upward: v(t1)=+19.6 m/sv(t_1) = +19.6\text{ m/s}
  2. Moving downward: v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}

Common Pitfall: Forgetting that velocity is a signed vector quantity. Solving only for v=+19.6 m/sv = +19.6\text{ m/s} yields only the upward event and misses the downward event on the return flight. (Also note that the burnout altitude y0=75.0 my_0 = 75.0\text{ m} is extraneous for finding these times, though it confirms the rocket is still well above the ground at t2t_2).


03

Solve for the Upward Time (t1t_1)

Substitute v(t1)=+19.6 m/sv(t_1) = +19.6\text{ m/s} into the velocity equation: +19.6=39.2−9.80t1+19.6 = 39.2 - 9.80 t_1

Rearrange to solve for t1t_1: 9.80t1=39.2−19.6=19.69.80 t_1 = 39.2 - 19.6 = 19.6 t1=19.6 m/s9.80 m/s2=2.00 st_1 = \frac{19.6\text{ m/s}}{9.80\text{ m/s}^2} = 2.00\text{ s}


04

Solve for the Downward Time (t2t_2)

Substitute v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s} into the velocity equation: −19.6=39.2−9.80t2-19.6 = 39.2 - 9.80 t_2

Rearrange to solve for t2t_2: 9.80t2=39.2+19.6=58.89.80 t_2 = 39.2 + 19.6 = 58.8 t2=58.8 m/s9.80 m/s2=6.00 st_2 = \frac{58.8\text{ m/s}}{9.80\text{ m/s}^2} = 6.00\text{ s}


05

Check via Trajectory Symmetry

The rocket reaches its maximum height when v(t)=0v(t) = 0: tpeak=v0g=39.29.80=4.00 st_{\text{peak}} = \frac{v_0}{g} = \frac{39.2}{9.80} = 4.00\text{ s}

Because vertical free-fall is symmetric in time around the apex:

  • The speed decreases to 19.6 m/s19.6\text{ m/s} at t1=4.00 s−2.00 s=2.00 st_1 = 4.00\text{ s} - 2.00\text{ s} = 2.00\text{ s}.
  • The speed increases back to 19.6 m/s19.6\text{ m/s} (in the downward direction) at t2=4.00 s+2.00 s=6.00 st_2 = 4.00\text{ s} + 2.00\text{ s} = 6.00\text{ s}.

Both times are consistent.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses speed with upward velocity, solving only for v = +19.6 m/s and omitting the downward velocity solution v = -19.6 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=v0−gt  ⟹  19.6=39.2−9.80t  ⟹  9.80t=19.6  ⟹  t=2.00 sv(t) = v_0 - gt \implies 19.6 = 39.2 - 9.80t \implies 9.80t = 19.6 \implies t = 2.00\text{ s}

  2. Step 2

    There is only one time when speed is 19.6 m/s:t=2.00 s\text{There is only one time when speed is } 19.6\text{ m/s} : t = 2.00\text{ s}

    Correct

    v(t2)=−19.6 m/s  ⟹  −19.6=39.2−9.80t2  ⟹  t2=6.00 sv(t_2) = -19.6\text{ m/s} \implies -19.6 = 39.2 - 9.80t_2 \implies t_2 = 6.00\text{ s}

    You concluded that there is only one time when speed is 19.6 m/s19.6\text{ m/s}. Because speed is a scalar magnitude (∣v(t)∣=19.6 m/s|v(t)| = 19.6\text{ m/s}), you must also consider the downward direction where v(t)=−19.6 m/sv(t) = -19.6\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the appropriate linear kinematic formula v(t)=v0−gtv(t) = v_0 - gt for motion under uniform gravitational acceleration.

You correctly calculated the time t1=2.00 st_1 = 2.00\text{ s} corresponding to the upward speed of 19.6 m/s19.6\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating speed with upward velocity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated instantaneous speed as identical to signed velocity, forgetting that an object in free-fall passes through the same speed twice (once while rising and once while falling) because ∣v∣=19.6 m/s|v| = 19.6\text{ m/s} implies v=±19.6 m/sv = \pm 19.6\text{ m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Speed from Velocity
  • Speed is the absolute magnitude of velocity: ∣v(t)∣=s  ⟺  v(t)=+s or v(t)=−s|v(t)| = s \iff v(t) = +s \text{ or } v(t) = -s.

  • Whenever a free-fall problem asks for a given non-zero speed below peak speed, set up two equations: one for the upward phase (v>0v > 0) and one for the downward phase (v<0v < 0).

Use Trajectory Symmetry as a Sanity Check
  • For a vertical projectile under constant gravity, the peak occurs at tpeak=v0gt_{\text{peak}} = \frac{v_0}{g}. Equal speeds occur symmetrically at t=tpeak±Δtt = t_{\text{peak}} \pm \Delta t.

  • Find tpeak=39.29.80=4.00 st_{\text{peak}} = \frac{39.2}{9.80} = 4.00\text{ s}. Since t1=2.00 st_1 = 2.00\text{ s} is 2.00 s2.00\text{ s} before the peak, the downward speed must occur 2.00 s2.00\text{ s} after the peak at t2=6.00 st_2 = 6.00\text{ s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the velocity to negative value: v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}.

  2. Substitute into the velocity equation: −19.6=39.2−9.80t2-19.6 = 39.2 - 9.80t_2.

  3. Rearrange to solve for t2t_2: 9.80t2=39.2+19.6=58.89.80t_2 = 39.2 + 19.6 = 58.8.

  4. Divide by acceleration: t2=58.89.80=6.00 st_2 = \frac{58.8}{9.80} = 6.00\text{ s}.

Final answer

t1=2.00 st_1 = 2.00\text{ s} and t2=6.00 st_2 = 6.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice translating conditions on magnitude (like ∣v∣=c|v| = c) into two separate algebraic cases (v=+cv = +c and v=−cv = -c).

  • Use vertical trajectory symmetry about the apex to verify whether return-trip solutions exist.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the second speed condition as a positive velocity with added gravity or reverses the sign of acceleration, yielding an unphysical negative or incorrect time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=v0−gt  ⟹  19.6=39.2−9.80t1  ⟹  t1=2.00 sv(t) = v_0 - g t \implies 19.6 = 39.2 - 9.80 t_1 \implies t_1 = 2.00\text{ s}

  2. Step 2

    −19.6=39.2+9.80t2  ⟹  9.80t2=−58.8  ⟹  t2=−6.00 s-19.6 = 39.2 + 9.80 t_2 \implies 9.80 t_2 = -58.8 \implies t_2 = -6.00\text{ s}

    Correct

    −19.6=39.2−9.80t2  ⟹  9.80t2=58.8  ⟹  t2=6.00 s-19.6 = 39.2 - 9.80 t_2 \implies 9.80 t_2 = 58.8 \implies t_2 = 6.00\text{ s}

    You switched the acceleration term from −gt-g t to +9.80t2+9.80 t_2. Because upward was chosen as positive for v0=+39.2 m/sv_0 = +39.2\text{ m/s}, gravity continues to pull downward throughout the entire flight, so the acceleration must remain a=−9.80 m/s2a = -9.80\text{ m/s}^2.

  3. Step 3

    taking magnitude t2=6.00 st_2 = 6.00\text{ s}

    Correct

    t2=6.00 st_2 = 6.00\text{ s} directly from −19.6=39.2−9.80t2-19.6 = 39.2 - 9.80 t_2

    You took the absolute value to discard the negative sign. A negative clock time indicates an algebraic or sign inconsistency earlier in the setup rather than a value to be made positive by taking its magnitude.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct kinematic equation relating velocity, acceleration, and time.

You correctly recognized that descending motion corresponds to a negative velocity component v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}.

You accurately solved for the ascending time t1=2.00 st_1 = 2.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Acceleration

You flipped the sign in front of gravity from −gt-g t to +gt+g t when switching from the upward phase to the downward phase.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated acceleration as speeding the object up locally by manually changing its sign, rather than maintaining a single consistent global coordinate axis (+y+y upward, a=−ga = -g) across the entire trajectory.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate Consistency
  • Once a positive direction is chosen (here, +y+y upward), all vector quantities (v0v_0, v(t)v(t), and aa) must adhere to that same axis for the entire motion.

  • Keep a=−g=−9.80 m/s2a = -g = -9.80\text{ m/s}^2 for both ascent and descent when using v0=+39.2 m/sv_0 = +39.2\text{ m/s}.

Physical Time Check
  • Clock time tt elapsed after burnout must be strictly positive (t>0t > 0).

  • If a kinematic calculation yields a negative time when you expect a future event, recheck the signs of your velocity and acceleration terms instead of taking the absolute value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Maintain the upward positive convention where v0=+39.2 m/sv_0 = +39.2\text{ m/s} and a=−9.80 m/s2a = -9.80\text{ m/s}^2.

  2. Set the downward velocity: v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}.

  3. Substitute into v(t)=v0−gtv(t) = v_0 - g t: −19.6=39.2−9.80t2-19.6 = 39.2 - 9.80 t_2.

  4. Rearrange: 9.80t2=39.2+19.6=58.89.80 t_2 = 39.2 + 19.6 = 58.8.

  5. Solve for t2t_2: t2=58.89.80=6.00 st_2 = \frac{58.8}{9.80} = 6.00\text{ s}.

Final answer

t1=2.00 st_1 = 2.00\text{ s} and t2=6.00 st_2 = 6.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector sign conventions in 1D kinematics to ensure coordinate axes remain fixed from start to finish.

  • Practice using apex symmetry (tpeak=v0gt_{\text{peak}} = \frac{v_0}{g}) as an independent sanity check for vertical projectile problems.

OverviewACEpath Teacher's Diagnosis

03 The student unnecessarily incorporates the initial altitude y₀ into the kinematic equation by using position instead of velocity and miscalculates the elapsed times.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v2=v02−2g(y−y0)  ⟹  (19.6)2=(39.2)2−2(9.80)(y−75.0)  ⟹  384.16=1536.64−19.6(y−75.0)  ⟹  y−75.0=58.8 mv^2 = v_0^2 - 2g(y - y_0) \implies (19.6)^2 = (39.2)^2 - 2(9.80)(y - 75.0) \implies 384.16 = 1536.64 - 19.6(y - 75.0) \implies y - 75.0 = 58.8\text{ m}

  2. Step 2

    t1=y−y0v=58.819.6=3.00 st_1 = \frac{y - y_0}{v} = \frac{58.8}{19.6} = 3.00\text{ s}

    Correct

    v(t1)=v0−gt1  ⟹  19.6=39.2−9.80t1  ⟹  t1=2.00 sv(t_1) = v_0 - gt_1 \implies 19.6 = 39.2 - 9.80t_1 \implies t_1 = 2.00\text{ s}

    You used t=Δyvt = \frac{\Delta y}{v}, which applies only when velocity is constant. Because gravity causes constant acceleration, the upward speed decreases linearly from 39.2 m/s39.2\text{ m/s} to 19.6 m/s19.6\text{ m/s}. Using v=v0−gt1v = v_0 - gt_1 yields t1=2.00 st_1 = 2.00\text{ s} (or using average velocity vˉ=39.2+19.62=29.4 m/s\bar{v} = \frac{39.2 + 19.6}{2} = 29.4\text{ m/s}, t1=58.829.4=2.00 st_1 = \frac{58.8}{29.4} = 2.00\text{ s}).

  3. Step 3

    t2=2×3.00=6.00 st_2 = 2 \times 3.00 = 6.00\text{ s}

    Correct

    v(t2)=−19.6 m/s  ⟹  −19.6=39.2−9.80t2  ⟹  t2=6.00 sv(t_2) = -19.6\text{ m/s} \implies -19.6 = 39.2 - 9.80t_2 \implies t_2 = 6.00\text{ s}

    Doubling t1t_1 is not a valid symmetry rule for finding when the rocket returns to the same speed. Although 6.00 s6.00\text{ s} matches the correct numerical value by coincidence, the downward time corresponds to velocity v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}, or symmetry around the apex (tpeak=4.00 st_{\text{peak}} = 4.00\text{ s}, giving t2=4.00+(4.00−2.00)=6.00 st_2 = 4.00 + (4.00 - 2.00) = 6.00\text{ s}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the third kinematic formula to determine the displacement above burnout where the rocket reaches the target speed.

You maintained proper arithmetic precision throughout your algebraic substitution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematics formula misapplication

Using constant-velocity time division t=Δyvt = \frac{\Delta y}{v} instead of accounting for continuous gravitational acceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the target instantaneous speed as a uniform speed over the entire interval rather than using the direct linear velocity-time relationship v(t)=v0−gtv(t) = v_0 - gt. Additionally, you assumed the downward time was double the upward time instead of setting the downward velocity vector to −19.6 m/s-19.6\text{ m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constant Acceleration vs. Constant Velocity
  • For constant acceleration aa, displacement is Δy=vˉt=v0+v2t\Delta y = \bar{v}t = \frac{v_0 + v}{2}t, never Δy=vt\Delta y = v t.

  • When acceleration is non-zero, connect velocity directly to elapsed time using v=v0+atv = v_0 + at.

Speed vs. Velocity in Free Fall
  • A speed of ∣v∣=c|v| = c corresponds to two distinct velocity states: v=+cv = +c (ascending) and v=−cv = -c (descending).

  • Solve v(t)=v0−gtv(t) = v_0 - gt twice, once with +c+c and once with −c-c.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the velocity-time relationship for unpowered vertical flight: v(t)=v0−gt=39.2−9.80tv(t) = v_0 - gt = 39.2 - 9.80t.

  2. Solve for the upward time t1t_1 by setting v(t1)=+19.6 m/sv(t_1) = +19.6\text{ m/s}: 19.6=39.2−9.80t1  ⟹  9.80t1=19.6  ⟹  t1=2.00 s19.6 = 39.2 - 9.80t_1 \implies 9.80t_1 = 19.6 \implies t_1 = 2.00\text{ s}.

  3. Solve for the downward time t2t_2 by setting v(t2)=−19.6 m/sv(t_2) = -19.6\text{ m/s}: −19.6=39.2−9.80t2  ⟹  9.80t2=58.8  ⟹  t2=6.00 s-19.6 = 39.2 - 9.80t_2 \implies 9.80t_2 = 58.8 \implies t_2 = 6.00\text{ s}.

Final answer

t1=2.00 st_1 = 2.00\text{ s} and t2=6.00 st_2 = 6.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always check whether acceleration is present before writing any time-distance quotient like dv\frac{d}{v}.

  • When asked for a specific speed in projectile motion, write both positive and negative velocity cases: v=+∣v∣v = +|v| and v=−∣v∣v = -|v|.

Lock it in

Similar question

01

A stone is thrown vertically upward with an initial velocity of v0=29.4 m/sv_0 = 29.4\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find all elapsed times tt at which the stone's speed is 9.80 m/s9.80\text{ m/s}.

Answer

t1=2.00 st_1 = 2.00\text{ s} and t2=4.00 st_2 = 4.00\text{ s}. Key steps: For the upward motion, +9.80=29.4−9.80t1  ⟹  t1=2.00 s+9.80 = 29.4 - 9.80t_1 \implies t_1 = 2.00\text{ s}. For the downward motion, −9.80=29.4−9.80t2  ⟹  t2=4.00 s-9.80 = 29.4 - 9.80t_2 \implies t_2 = 4.00\text{ s}.

02

An arrow is fired straight up at 50.0 m/s50.0\text{ m/s} from ground level (g=9.80 m/s2g = 9.80\text{ m/s}^2). Determine the two times when the arrow's velocity vector satisfies ∣v⃗∣=30.0 m/s|\vec{v}| = 30.0\text{ m/s}, and state the rocket's direction of travel at each time.

Answer

t1=2.04 st_1 = 2.04\text{ s} (traveling upward) and t2=8.16 st_2 = 8.16\text{ s} (traveling downward). Key steps: v1=+30.0 m/s  ⟹  30.0=50.0−9.80t1  ⟹  t1≈2.04 sv_1 = +30.0\text{ m/s} \implies 30.0 = 50.0 - 9.80t_1 \implies t_1 \approx 2.04\text{ s}; v2=−30.0 m/s  ⟹  −30.0=50.0−9.80t2  ⟹  t2≈8.16 sv_2 = -30.0\text{ m/s} \implies -30.0 = 50.0 - 9.80t_2 \implies t_2 \approx 8.16\text{ s}.

03

A pellet is projected upward from a cliff edge with an initial speed of 40.0 m/s40.0\text{ m/s}. After reaching its peak, it falls past the cliff edge into a canyon below. Assuming g=10.0 m/s2g = 10.0\text{ m/s}^2, determine all times t≥0t \ge 0 when the pellet's speed is 20.0 m/s20.0\text{ m/s}, and find the time when its speed becomes 60.0 m/s60.0\text{ m/s}.

Answer

Speed of 20.0 m/s20.0\text{ m/s} occurs at t=2.00 st = 2.00\text{ s} (upward) and t=6.00 st = 6.00\text{ s} (downward); speed of 60.0 m/s60.0\text{ m/s} occurs only at t=10.0 st = 10.0\text{ s} (downward). Key steps: v=±20.0 m/s  ⟹  20.0=40.0−10.0t  ⟹  t=2.00 sv = \pm 20.0\text{ m/s} \implies 20.0 = 40.0 - 10.0t \implies t = 2.00\text{ s} and −20.0=40.0−10.0t  ⟹  t=6.00 s-20.0 = 40.0 - 10.0t \implies t = 6.00\text{ s}. Since the initial upward speed is only 40.0 m/s40.0\text{ m/s}, a speed of 60.0 m/s60.0\text{ m/s} is impossible on the ascent, so v=−60.0 m/s  ⟹  −60.0=40.0−10.0t  ⟹  t=10.0 sv = -60.0\text{ m/s} \implies -60.0 = 40.0 - 10.0t \implies t = 10.0\text{ s}.

Loading workspace…