Resources

A thermally insulated cylinder fitted with a frictionless piston contains 0.200 kg0.200\text{ kg} of saturated liquid water at 100.0∘C100.0^\circ\text{C} under a constant atmospheric pressure of 1.013×105 Pa1.013 \times 10^5\text{ Pa}. Thermal energy is added until all the water vaporizes asymptotically into saturated dry steam at 100.0∘C100.0^\circ\text{C}. The specific volume of liquid water at this state is vl=1.043×10−3 m3/kgv_l = 1.043 \times 10^{-3}\text{ m}^3/\text{kg}, and the specific volume of saturated water vapor is vv=1.673 m3/kgv_v = 1.673\text{ m}^3/\text{kg}. Given Lv=2.257×106 J/kgL_v = 2.257 \times 10^6\text{ J}/\text{kg}, calculate the change in internal energy ΔU\Delta U of the water during this isobaric phase transition.

Answer and steps

Final answer

4.175×105 J4.175 \times 10^5\text{ J}

Steps

01

Calculate the heat added, QQ

To find the change in internal energy ΔU\Delta U during the phase change, apply the First Law of Thermodynamics: ΔU=Q−W\Delta U = Q - W where:

  • QQ is the total heat added to the system,
  • WW is the work done by the system on the surroundings as it expands against constant external pressure.

The heat required to vaporize a mass mm of water at constant temperature and pressure is given by the latent heat of vaporization:

Q=mLvQ = m L_v

Substitute the given values:

Q=(0.200 kg)(2.257×106 J/kg)=4.514×105 JQ = (0.200\text{ kg})(2.257 \times 10^6\text{ J/kg}) = 4.514 \times 10^5\text{ J}


02

Calculate the work done, WW

Because the process occurs at constant atmospheric pressure PP, the work done by the expanding steam against the frictionless piston is:

W=PΔV=Pm(vv−vl)W = P \Delta V = P m (v_v - v_l)

First, calculate the change in volume ΔV\Delta V:

ΔV=0.200 kg×(1.673 m3/kg−1.043×10−3 m3/kg)\Delta V = 0.200\text{ kg} \times (1.673\text{ m}^3/\text{kg} - 1.043 \times 10^{-3}\text{ m}^3/\text{kg}) ΔV=0.200 kg×1.671957 m3/kg≈0.33439 m3\Delta V = 0.200\text{ kg} \times 1.671957\text{ m}^3/\text{kg} \approx 0.33439\text{ m}^3

Now, compute the work done:

W=(1.013×105 Pa)(0.33439 m3)≈3.387×104 JW = (1.013 \times 10^5\text{ Pa})(0.33439\text{ m}^3) \approx 3.387 \times 10^4\text{ J}


03

Compute the change in internal energy, ΔU\Delta U

Using the First Law of Thermodynamics:

ΔU=Q−W\Delta U = Q - W ΔU=4.514×105 J−0.03387×105 J=4.175×105 J\Delta U = 4.514 \times 10^5\text{ J} - 0.03387 \times 10^5\text{ J} = 4.175 \times 10^5\text{ J}

Common Pitfall: Forgetting that water expands significantly during boiling. Heat supplied during a phase change at constant pressure is not entirely stored as internal energy; a portion is spent as boundary work (W=PΔVW = P\Delta V) pushing back the atmosphere.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the change in internal energy directly to the heat added, ignoring the boundary work done by expansion against atmospheric pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=m⋅Lv=0.200⋅2.257×106=451400 JQ = m \cdot L_v = 0.200 \cdot 2.257 \times 10^6 = 451400\text{ J}

  2. Step 2

    ΔU=Q\Delta U = Q

    Correct

    ΔU=Q−W=Q−PΔV=Q−Pm(vv−vl)\Delta U = Q - W = Q - P \Delta V = Q - P m (v_v - v_l)

    Because the vaporization takes place at constant pressure in a cylinder with a movable piston, the system expands significantly. By the First Law of Thermodynamics, ΔU=Q−W\Delta U = Q - W, where W=PΔVW = P\Delta V is the expansion work done on the surroundings.

  3. Step 3

    ΔU=451400 J=4.51×105 J\Delta U = 451400\text{ J} = 4.51 \times 10^5\text{ J}

    Correct

    ΔU=4.514×105 J−3.387×104 J=4.175×105 J\Delta U = 4.514 \times 10^5\text{ J} - 3.387 \times 10^4\text{ J} = 4.175 \times 10^5\text{ J}

    Carrying over the missing work term led to an overestimated change in internal energy.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the formula for latent heat Q=mLvQ = m L_v.

You performed the numerical multiplication accurately to find the heat input.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected boundary work during isobaric phase change

You equated ΔU\Delta U directly to QQ, treating the phase change as an isochoric (constant volume) process rather than an isobaric (constant pressure) expansion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing heat added at constant pressure (Qp=ΔHQ_p = \Delta H) with the change in internal energy (ΔU\Delta U). When liquid boils into gas, the volume increases by orders of magnitude, so a non-negligible fraction of the thermal energy goes into doing boundary work (PΔVP\Delta V) against external pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
First Law of Thermodynamics
  • ΔU=Q−W\Delta U = Q - W

  • Always check whether the system changes volume. If ΔV≠0\Delta V \neq 0 at constant pressure PP, calculate W=PΔVW = P\Delta V.

Internal Energy vs. Enthalpy in Boiling
  • Qp=ΔH=ΔU+PΔVQ_p = \Delta H = \Delta U + P\Delta V

  • Remember that latent heat supplied at constant pressure equals the enthalpy of vaporization ΔH\Delta H, not the change in internal energy ΔU\Delta U.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the change in volume: ΔV=m(vv−vl)=0.200 kg×(1.673−0.001043) m3/kg≈0.33439 m3\Delta V = m (v_v - v_l) = 0.200\text{ kg} \times (1.673 - 0.001043)\text{ m}^3/\text{kg} \approx 0.33439\text{ m}^3.

  2. Calculate the work done by expansion: W=PΔV=(1.013×105 Pa)(0.33439 m3)≈3.387×104 JW = P \Delta V = (1.013 \times 10^5\text{ Pa})(0.33439\text{ m}^3) \approx 3.387 \times 10^4\text{ J}.

  3. Apply the First Law: ΔU=Q−W=4.514×105 J−3.387×104 J=4.175×105 J\Delta U = Q - W = 4.514 \times 10^5\text{ J} - 3.387 \times 10^4\text{ J} = 4.175 \times 10^5\text{ J}.

Final answer

4.175×105 J4.175 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the First Law of Thermodynamics ΔU=Q−W\Delta U = Q - W before substituting known quantities.

  • Whenever a problem provides specific volumes (vlv_l and vvv_v), use them to check if expansion work W=PΔVW = P\Delta V occurs.

OverviewACEpath Teacher's Diagnosis

02 The student uses the wrong sign in the first law of thermodynamics by writing ΔU = Q + W, mistakenly adding the work of expansion instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=m⋅Lv=0.200⋅2.257×106=451400 JQ = m \cdot L_v = 0.200 \cdot 2.257 \times 10^6 = 451400\text{ J}

  2. Step 2

    ΔV=0.200⋅(1.673−0.001043)=0.33439 m3\Delta V = 0.200 \cdot (1.673 - 0.001043) = 0.33439\text{ m}^3

  3. Step 3

    W=P⋅ΔV=1.013×105⋅0.33439=33874 JW = P \cdot \Delta V = 1.013 \times 10^5 \cdot 0.33439 = 33874\text{ J}

  4. Step 4

    ΔU=Q+W=451400+33874=485274 J≈4.85×105 J\Delta U = Q + W = 451400 + 33874 = 485274\text{ J} \approx 4.85 \times 10^5\text{ J}

    Correct

    ΔU=Q−W=4.514×105 J−3.387×104 J=4.175×105 J\Delta U = Q - W = 4.514 \times 10^5\text{ J} - 3.387 \times 10^4\text{ J} = 4.175 \times 10^5\text{ J}

    Because the system expands against atmospheric pressure, it does positive work on the surroundings. Energy leaves the system as work, so W=PΔVW = P\Delta V must be subtracted from the heat added (QQ), giving ΔU=Q−W\Delta U = Q - W.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the latent heat of vaporization using Q=mLvQ = m L_v.

You accurately found the total volume change using the specific volumes of vapor and liquid.

You correctly evaluated the boundary work using W=PΔVW = P \Delta V.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in the First Law of Thermodynamics

You defined WW as positive work of expansion (PΔVP \Delta V) but then added it to QQ rather than subtracting it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the two common sign conventions for the First Law of Thermodynamics (ΔU=Q−Wby\Delta U = Q - W_{\text{by}} versus ΔU=Q+Won\Delta U = Q + W_{\text{on}}). When WW is calculated as +PΔV+P\Delta V for an expansion, it represents work done by the system on the surroundings, which reduces the internal energy remaining in the system.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Energy Direction
  • Expansion (ΔV>0\Delta V > 0) means the gas pushes the surroundings, performing positive work on the environment and removing energy from the system.

  • Check whether work adds energy to or takes energy away from the gas before combining it with QQ.

First Law Sign Choice
  • If defining W=PΔVW = P\Delta V, use ΔU=Q−W\Delta U = Q - W. If using ΔU=Q+W\Delta U = Q + W, then Won=−PΔVW_{\text{on}} = -P\Delta V.

  • Consistently pair your formula for work with the matching form of the First Law.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that the expanding steam does work on the surroundings, so Wby=3.3874×104 JW_{\text{by}} = 3.3874 \times 10^4\text{ J}.

  2. Apply the First Law: ΔU=Q−Wby=4.5140×105 J−3.3874×104 J\Delta U = Q - W_{\text{by}} = 4.5140 \times 10^5\text{ J} - 3.3874 \times 10^4\text{ J}.

  3. Compute the final change in internal energy: ΔU=4.175×105 J\Delta U = 4.175 \times 10^5\text{ J}.

Final answer

4.175×105 J4.175 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw an energy balance diagram: show QQ entering the boundary and expansion work WW leaving the boundary.

  • Double-check that during vaporization, ΔU<Q\Delta U < Q because part of the heat supplied is spent pushing back the atmosphere.

OverviewACEpath Teacher's Diagnosis

03 The student neglects to multiply specific volumes by the mass when computing the volume change, underestimating the work done by a factor of mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Q=m⋅Lv=0.200⋅2.257×106=451400 JQ = m \cdot L_v = 0.200 \cdot 2.257 \times 10^6 = 451400\text{ J}

  2. Step 2

    ΔV=vv−vl=1.673−0.001043=1.67196 m3\Delta V = v_v - v_l = 1.673 - 0.001043 = 1.67196\text{ m}^3

    Correct

    ΔV=m(vv−vl)=0.200 kg×(1.673−0.001043) m3/kg≈0.33439 m3\Delta V = m(v_v - v_l) = 0.200\text{ kg} \times (1.673 - 0.001043)\text{ m}^3/\text{kg} \approx 0.33439\text{ m}^3

    The values vvv_v and vlv_l are specific volumes with units of m3/kg\text{m}^3/\text{kg}. To find the total volume change ΔV\Delta V in m3\text{m}^3, you must multiply the change in specific volume by the mass mm.

  3. Step 3

    W=P⋅ΔV=1.013×105⋅1.67196=169370 JW = P \cdot \Delta V = 1.013 \times 10^5 \cdot 1.67196 = 169370\text{ J}

    Correct

    W=PΔV=(1.013×105 Pa)(0.33439 m3)≈3.387×104 JW = P \Delta V = (1.013 \times 10^5\text{ Pa})(0.33439\text{ m}^3) \approx 3.387 \times 10^4\text{ J}

    You applied the correct isobaric work formula W=PΔVW = P \Delta V, but this value is overestimated because it carries forward the unscaled volume change from Step 2.

  4. Step 4

    ΔU=Q−W=451400−169370=282030 J≈2.82×105 J\Delta U = Q - W = 451400 - 169370 = 282030\text{ J} \approx 2.82 \times 10^5\text{ J}

    Correct

    ΔU=Q−W=4.514×105 J−3.387×104 J=4.175×105 J\Delta U = Q - W = 4.514 \times 10^5\text{ J} - 3.387 \times 10^4\text{ J} = 4.175 \times 10^5\text{ J}

    You applied the First Law of Thermodynamics correctly, but the final numerical value is affected by the error in WW.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Q=mLvQ = m L_v to calculate the heat supplied during the phase change.

You correctly applied the First Law of Thermodynamics, ΔU=Q−W\Delta U = Q - W.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Specific vs. Total Extensive Properties

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated specific volume (vv, volume per unit mass) with total extensive volume (VV). Because specific volume has units of m3/kg\text{m}^3/\text{kg}, omitting mm caused the work done by the system to be overestimated by a factor of 1/m=51/m = 5.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check physical units of volume
  • Total volume VV is measured in m3\text{m}^3, whereas specific volume vv is measured in m3/kg\text{m}^3/\text{kg}.

  • Always verify units: compute total volume using V=m⋅vV = m \cdot v whenever specific volume is given.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the total volume change: ΔV=m(vv−vl)=0.200×(1.673−0.001043)=0.33439 m3\Delta V = m (v_v - v_l) = 0.200 \times (1.673 - 0.001043) = 0.33439\text{ m}^3.

  2. Compute the boundary work: W=PΔV=1.013×105×0.33439≈3.387×104 JW = P \Delta V = 1.013 \times 10^5 \times 0.33439 \approx 3.387 \times 10^4\text{ J}.

  3. Subtract work from heat: ΔU=Q−W=451400−33874=4.175×105 J\Delta U = Q - W = 451400 - 33874 = 4.175 \times 10^5\text{ J}.

Final answer

4.175×105 J4.175 \times 10^5\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay special attention to lowercase vs. uppercase symbols (vv for specific volume vs. VV for total volume).

  • Perform unit checks on intermediate quantities: verify that ΔV\Delta V yields m3\text{m}^3, not m3/kg\text{m}^3/\text{kg}.

Lock it in

Similar question

01

A sample of 0.100 kg0.100\text{ kg} of liquid at its boiling point receives 1.80×105 J1.80 \times 10^5\text{ J} of heat to vaporize completely at a constant pressure of 1.00×105 Pa1.00 \times 10^5\text{ Pa}. The volume increases from 1.0×10−4 m31.0 \times 10^{-4}\text{ m}^3 to 0.200 m30.200\text{ m}^3. Calculate the work done by the system WW and the change in internal energy ΔU\Delta U.

Answer

W=2.00×104 JW = 2.00 \times 10^4\text{ J}, ΔU=1.60×105 J\Delta U = 1.60 \times 10^5\text{ J}. Steps: ΔV≈0.200−0.0001=0.1999 m3≈0.200 m3\Delta V \approx 0.200 - 0.0001 = 0.1999\text{ m}^3 \approx 0.200\text{ m}^3; W=PΔV=(1.00×105)(0.1999)≈2.00×104 JW = P\Delta V = (1.00 \times 10^5)(0.1999) \approx 2.00 \times 10^4\text{ J}; ΔU=Q−W=1.80×105−0.20×105=1.60×105 J\Delta U = Q - W = 1.80 \times 10^5 - 0.20 \times 10^5 = 1.60 \times 10^5\text{ J}.

02

A substance with latent heat of vaporization Lv=8.0×105 J/kgL_v = 8.0 \times 10^5\text{ J/kg} vaporizes under a constant pressure P=2.0×105 PaP = 2.0 \times 10^5\text{ Pa}. If the specific volume changes by Δv=0.50 m3/kg\Delta v = 0.50\text{ m}^3/\text{kg}, what fraction of the supplied heat is converted into boundary work?

Answer

12.5%12.5\% (or 0.1250.125). Steps: Work per unit mass is w=PΔv=(2.0×105 Pa)(0.50 m3/kg)=1.0×105 J/kgw = P\Delta v = (2.0 \times 10^5\text{ Pa})(0.50\text{ m}^3/\text{kg}) = 1.0 \times 10^5\text{ J/kg}. Heat per unit mass is q=Lv=8.0×105 J/kgq = L_v = 8.0 \times 10^5\text{ J/kg}. Fraction =w/q=(1.0×105)/(8.0×105)=1/8=12.5%= w / q = (1.0 \times 10^5)/(8.0 \times 10^5) = 1/8 = 12.5\%.

03

When 1.00 g1.00\text{ g} of ice melts into liquid water at 0∘C0^\circ\text{C} under atmospheric pressure (P=1.013×105 PaP = 1.013 \times 10^5\text{ Pa}), its specific volume decreases from 1.091×10−3 m3/kg1.091 \times 10^{-3}\text{ m}^3/\text{kg} to 1.000×10−3 m3/kg1.000 \times 10^{-3}\text{ m}^3/\text{kg}. Given Lf=3.33×105 J/kgL_f = 3.33 \times 10^5\text{ J/kg}, determine whether ΔU\Delta U is slightly greater than, equal to, or slightly less than QQ, and calculate ΔU−Q\Delta U - Q.

Answer

ΔU\Delta U is slightly greater than QQ; ΔU−Q=+9.2×10−3 J\Delta U - Q = +9.2 \times 10^{-3}\text{ J}. Steps: Because the substance contracts upon melting, ΔV=(1.00×10−3 kg)(1.000×10−3−1.091×10−3)=−9.1×10−8 m3\Delta V = (1.00 \times 10^{-3}\text{ kg})(1.000 \times 10^{-3} - 1.091 \times 10^{-3}) = -9.1 \times 10^{-8}\text{ m}^3. Boundary work is W=PΔV=(1.013×105)(−9.1×10−8)=−9.2×10−3 JW = P\Delta V = (1.013 \times 10^5)(-9.1 \times 10^{-8}) = -9.2 \times 10^{-3}\text{ J}. By the First Law, ΔU=Q−W=Q−(−9.2×10−3 J)=Q+9.2×10−3 J\Delta U = Q - W = Q - (-9.2 \times 10^{-3}\text{ J}) = Q + 9.2 \times 10^{-3}\text{ J}, so surroundings do work on the system.

Loading workspace…