Resources

A high-speed robotic shuttle undergoes 1D motion along the xx-axis from t=0.0 st = 0.0\text{ s} to t=10.0 st = 10.0\text{ s}. Its position-time graph is parabolic, given by the function x(t)=−2.0t2+16.0t+5.0x(t) = -2.0 t^2 + 16.0 t + 5.0, where xx is in meters and tt is in seconds. (a) Identify the exact turnaround time tcritt_{\text{crit}} where the shuttle changes direction, and calculate its position at that instant. (b) Calculate the instantaneous velocity at t=6.0 st = 6.0\text{ s} by taking the slope of the tangent line to the position-time curve. (c) Determine the shuttle's average speed over the full interval from t=0.0 st = 0.0\text{ s} to t=10.0 st = 10.0\text{ s}.

Answer and steps

Final answer

(a) tcrit=4.0 st_{\text{crit}} = 4.0\text{ s}, x(4.0)=37.0 mx(4.0) = 37.0\text{ m}; (b) v(6.0)=−8.0 m/sv(6.0) = -8.0\text{ m/s}; (c) vavg, speed=10.4 m/sv_{\text{avg, speed}} = 10.4\text{ m/s}

Steps

Part (a): Turnaround Time and Position

The position of the robotic shuttle as a function of time is given by: x(t)=−2.0t2+16.0t+5.0x(t) = -2.0 t^2 + 16.0 t + 5.0

The velocity v(t)v(t) corresponds to the time derivative (or slope of the tangent line) of the position function: v(t)=dxdt=ddt(−2.0t2+16.0t+5.0)=−4.0t+16.0v(t) = \frac{dx}{dt} = \frac{d}{dt}\left(-2.0 t^2 + 16.0 t + 5.0\right) = -4.0 t + 16.0

A turnaround point occurs when the object momentarily stops to reverse direction, meaning its instantaneous velocity is zero: −4.0tcrit+16.0=0-4.0 t_{\text{crit}} + 16.0 = 0 4.0tcrit=16.0  ⟹  tcrit=4.0 s4.0 t_{\text{crit}} = 16.0 \implies t_{\text{crit}} = 4.0\text{ s}

Substitute tcrit=4.0 st_{\text{crit}} = 4.0\text{ s} back into the position function to find its position at that moment: x(4.0)=−2.0(4.0)2+16.0(4.0)+5.0=−32.0+64.0+5.0=37.0 mx(4.0) = -2.0(4.0)^2 + 16.0(4.0) + 5.0 = -32.0 + 64.0 + 5.0 = 37.0\text{ m}


Part (b): Instantaneous Velocity at t=6.0 st = 6.0\text{ s}

The instantaneous velocity at any time tt is given by the derivative derived in part (a): v(t)=−4.0t+16.0v(t) = -4.0 t + 16.0

Evaluating this slope at t=6.0 st = 6.0\text{ s}: v(6.0)=−4.0(6.0)+16.0=−24.0+16.0=−8.0 m/sv(6.0) = -4.0(6.0) + 16.0 = -24.0 + 16.0 = -8.0\text{ m/s}

The negative sign indicates that at t=6.0 st = 6.0\text{ s}, the shuttle is moving in the negative xx-direction.


Part (c): Average Speed over the Full Interval

The average speed is the total path length (distance traveled) divided by the total elapsed time: vavg, speed=dtotalΔtv_{\text{avg, speed}} = \frac{d_{\text{total}}}{\Delta t}

Common Pitfall: Do not confuse average speed with average velocity. Average velocity depends only on the net displacement Δx=x(tf)−x(ti)\Delta x = x(t_f) - x(t_i), while average speed accounts for the entire distance traveled, including reversals of direction.

  1. Initial position (t=0.0 st = 0.0\text{ s}): x(0.0)=−2.0(0.0)2+16.0(0.0)+5.0=5.0 mx(0.0) = -2.0(0.0)^2 + 16.0(0.0) + 5.0 = 5.0\text{ m}
  2. Turnaround position (t=4.0 st = 4.0\text{ s}): x(4.0)=37.0 mx(4.0) = 37.0\text{ m}
  3. Final position (t=10.0 st = 10.0\text{ s}): x(10.0)=−2.0(10.0)2+16.0(10.0)+5.0=−200.0+160.0+5.0=−35.0 mx(10.0) = -2.0(10.0)^2 + 16.0(10.0) + 5.0 = -200.0 + 160.0 + 5.0 = -35.0\text{ m}

Now calculate the distance traveled in each segment:

  • Forward leg (t=0.0 st = 0.0\text{ s} to t=4.0 st = 4.0\text{ s}): d1=∣x(4.0)−x(0.0)∣=∣37.0 m−5.0 m∣=32.0 md_1 = |x(4.0) - x(0.0)| = |37.0\text{ m} - 5.0\text{ m}| = 32.0\text{ m}
  • Backward leg (t=4.0 st = 4.0\text{ s} to t=10.0 st = 10.0\text{ s}): d2=∣x(10.0)−x(4.0)∣=∣−35.0 m−37.0 m∣=∣−72.0 m∣=72.0 md_2 = |x(10.0) - x(4.0)| = |-35.0\text{ m} - 37.0\text{ m}| = |-72.0\text{ m}| = 72.0\text{ m}
  • Total distance traveled: dtotal=d1+d2=32.0 m+72.0 m=104.0 md_{\text{total}} = d_1 + d_2 = 32.0\text{ m} + 72.0\text{ m} = 104.0\text{ m}
  • Average speed: vavg, speed=104.0 m10.0 s−0.0 s=104.0 m10.0 s=10.4 m/sv_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s} - 0.0\text{ s}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses average speed with the magnitude of average velocity by using net displacement instead of total path length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=dxdt=−4.0t+16.0  ⟹  −4.0t+16.0=0  ⟹  tcrit=4.0 s  ⟹  x(4.0)=−2.0(4.0)2+16.0(4.0)+5.0=37.0 mv(t) = \frac{dx}{dt} = -4.0t + 16.0 \implies -4.0t + 16.0 = 0 \implies t_{\text{crit}} = 4.0\text{ s} \implies x(4.0) = -2.0(4.0)^2 + 16.0(4.0) + 5.0 = 37.0\text{ m}

  2. Step 2

    v(6.0)=−4.0(6.0)+16.0  ⟹  v(6.0)=−8.0 m/sv(6.0) = -4.0(6.0) + 16.0 \implies v(6.0) = -8.0\text{ m/s}

  3. Step 3

    x(0)=5.0 m,x(10.0)=−2.0(100.0)+160.0+5.0=−35.0 m  ⟹  d=∣x(10.0)−x(0)∣=∣−35.0−5.0∣=40.0 mx(0) = 5.0\text{ m},\quad x(10.0) = -2.0(100.0) + 160.0 + 5.0 = -35.0\text{ m} \implies d = |x(10.0) - x(0)| = |-35.0 - 5.0| = 40.0\text{ m}

    Correct

    dtotal=∣x(4.0)−x(0.0)∣+∣x(10.0)−x(4.0)∣=∣37.0−5.0∣+∣−35.0−37.0∣=32.0 m+72.0 m=104.0 md_{\text{total}} = |x(4.0) - x(0.0)| + |x(10.0) - x(4.0)| = |37.0 - 5.0| + |-35.0 - 37.0| = 32.0\text{ m} + 72.0\text{ m} = 104.0\text{ m}

    Because the shuttle changes direction at t=4.0 st = 4.0\text{ s}, the total distance traveled is the sum of the distances of the forward and backward legs, not simply the net displacement ∣x(10.0)−x(0)∣|x(10.0) - x(0)|.

  4. Step 4

    average speed=40.010.0=4.0 m/s\text{average speed} = \frac{40.0}{10.0} = 4.0\text{ m/s}

    Correct

    vavg, speed=dtotalΔt=104.0 m10.0 s=10.4 m/sv_{\text{avg, speed}} = \frac{d_{\text{total}}}{\Delta t} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}

    You divided your distance value by total elapsed time correctly, but the result is incorrect because it inherited the displacement value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly differentiated the position function to find the velocity equation.

You set the velocity to zero and solved for the turnaround time and maximum position accurately.

You calculated the instantaneous velocity at t=6.0 st = 6.0\text{ s} with the correct sign and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Confusion

You used the net displacement formula ∣x(tf)−x(ti)∣|x(t_f) - x(t_i)| instead of summing the path lengths before and after the turnaround point.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Average speed is defined as total distance divided by elapsed time (dtotal/Δtd_{\text{total}} / \Delta t), whereas average velocity is displacement divided by elapsed time (Δx/Δt\Delta x / \Delta t). Whenever an object reverses direction within the time interval, total distance must be computed by splitting the motion at each turnaround point (v=0v = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Reversals
  • If v(t)=0v(t) = 0 anywhere inside the time interval (ti,tf)(t_i, t_f), the object turns around.

  • Split the time interval at each critical turnaround time and compute the absolute position change for each segment.

Speed vs. Velocity Formula
  • Average speed =dtotalΔt= \frac{d_{\text{total}}}{\Delta t}, where dtotal=∑∣Δxk∣d_{\text{total}} = \sum |\Delta x_k|. Average velocity =xf−xiΔt= \frac{x_f - x_i}{\Delta t}.

  • Never compute average speed using only the endpoints if the object reversed direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the forward distance from t=0.0 st = 0.0\text{ s} to t=4.0 st = 4.0\text{ s}: d1=∣x(4.0)−x(0.0)∣=∣37.0 m−5.0 m∣=32.0 md_1 = |x(4.0) - x(0.0)| = |37.0\text{ m} - 5.0\text{ m}| = 32.0\text{ m}.

  2. Find the backward distance from t=4.0 st = 4.0\text{ s} to t=10.0 st = 10.0\text{ s}: d2=∣x(10.0)−x(4.0)∣=∣−35.0 m−37.0 m∣=72.0 md_2 = |x(10.0) - x(4.0)| = |-35.0\text{ m} - 37.0\text{ m}| = 72.0\text{ m}.

  3. Add the segment distances to find the total distance: dtotal=32.0 m+72.0 m=104.0 md_{\text{total}} = 32.0\text{ m} + 72.0\text{ m} = 104.0\text{ m}.

  4. Divide by the elapsed time: vavg, speed=104.0 m10.0 s=10.4 m/sv_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}.

Final answer

vavg, speed=10.4 m/sv_{\text{avg, speed}} = 10.4\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before finding average speed, always inspect your velocity function to see if the object changes direction during the interval.

  • Practice breaking total distance into piecewise intervals: dtotal=∫titf∣v(t)∣ dtd_{\text{total}} = \int_{t_i}^{t_f} |v(t)|\,dt.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly differentiates the quadratic term by omitting the power multiplier, finding an incorrect velocity function and turnaround time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(t)=dxdt=−2.0t+16.0  ⟹  −2.0t+16.0=0  ⟹  tcrit=8.0 sv(t) = \frac{dx}{dt} = -2.0t + 16.0 \implies -2.0t + 16.0 = 0 \implies t_{\text{crit}} = 8.0\text{ s}

    Correct

    v(t)=dxdt=ddt(−2.0t2+16.0t+5.0)=−4.0t+16.0  ⟹  −4.0t+16.0=0  ⟹  tcrit=4.0 sv(t) = \frac{dx}{dt} = \frac{d}{dt}(-2.0t^2 + 16.0t + 5.0) = -4.0t + 16.0 \implies -4.0t + 16.0 = 0 \implies t_{\text{crit}} = 4.0\text{ s}

    When differentiating −2.0t2-2.0 t^2 with respect to tt, you need to multiply the coefficient by the exponent 22: ddt(−2.0t2)=−2.0⋅2t=−4.0t\frac{d}{dt}(-2.0 t^2) = -2.0 \cdot 2 t = -4.0 t. Because the factor of 22 was omitted, the resulting velocity expression and turnaround time were incorrect.

  2. Step 2

    x(8.0)=−2.0(8.0)2+16.0(8.0)+5.0=5.0 mx(8.0) = -2.0(8.0)^2 + 16.0(8.0) + 5.0 = 5.0\text{ m}

    Correct

    x(4.0)=−2.0(4.0)2+16.0(4.0)+5.0=−32.0+64.0+5.0=37.0 mx(4.0) = -2.0(4.0)^2 + 16.0(4.0) + 5.0 = -32.0 + 64.0 + 5.0 = 37.0\text{ m}

    You substituted your turnaround time correctly into the position equation, but because tcritt_{\text{crit}} was calculated as 8.0 s8.0\text{ s} instead of 4.0 s4.0\text{ s}, this position value is incorrect.

  3. Step 3

    v(6.0)=−2.0(6.0)+16.0=4.0 m/sv(6.0) = -2.0(6.0) + 16.0 = 4.0\text{ m/s}

    Correct

    v(6.0)=−4.0(6.0)+16.0=−24.0+16.0=−8.0 m/sv(6.0) = -4.0(6.0) + 16.0 = -24.0 + 16.0 = -8.0\text{ m/s}

    You substituted t=6.0 st = 6.0\text{ s} correctly into your velocity expression, but the underlying derivative was missing the factor of 22, yielding +4.0 m/s+4.0\text{ m/s} instead of −8.0 m/s-8.0\text{ m/s}.

  4. Step 4

    x(0)=5.0 m,  x(8.0)=5.0 m,  x(10.0)=−35.0 m  ⟹  d=∣5.0−5.0∣+∣−35.0−5.0∣=40.0 m  ⟹  vavg, speed=40.010.0=4.0 m/sx(0) = 5.0\text{ m},\; x(8.0) = 5.0\text{ m},\; x(10.0) = -35.0\text{ m} \implies d = |5.0 - 5.0| + |-35.0 - 5.0| = 40.0\text{ m} \implies v_{\text{avg, speed}} = \frac{40.0}{10.0} = 4.0\text{ m/s}

    Correct

    x(0)=5.0 m,  x(4.0)=37.0 m,  x(10.0)=−35.0 m  ⟹  d=∣37.0−5.0∣+∣−35.0−37.0∣=32.0+72.0=104.0 m  ⟹  vavg, speed=104.0 m10.0 s=10.4 m/sx(0) = 5.0\text{ m},\; x(4.0) = 37.0\text{ m},\; x(10.0) = -35.0\text{ m} \implies d = |37.0 - 5.0| + |-35.0 - 37.0| = 32.0 + 72.0 = 104.0\text{ m} \implies v_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}

    Your method of splitting the path at the turnaround point to find the total distance was conceptually sound, but using t=8.0 st = 8.0\text{ s} instead of t=4.0 st = 4.0\text{ s} led to an incorrect total distance and average speed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a turnaround point occurs where instantaneous velocity is zero.

You properly evaluated the position function at the start, turnaround, and endpoint to calculate total path length.

You maintained clear notation and followed the correct sequence of physical definitions throughout.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Calculus Differentiation Rule Error

You dropped the exponent multiplier 22 when taking the derivative of −2.0t2-2.0 t^2, writing −2.0t-2.0 t instead of −4.0t-4.0 t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete application of the power rule ddt(ctn)=c⋅ntn−1\frac{d}{dt}(c t^n) = c \cdot n t^{n-1}, treating the quadratic term as if its coefficient remained unchanged after differentiation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Power Rule Verification
  • For any term atna t^n, the derivative is a⋅ntn−1a \cdot n t^{n-1}.

  • Always explicitly multiply the existing coefficient by the original power before reducing the power by one.

Turnaround Symmetry Check
  • For a parabola x(t)=at2+bt+cx(t) = a t^2 + b t + c, the vertex occurs at t=−b2at = -\frac{b}{2a}.

  • Use tcrit=−16.02(−2.0)=4.0 st_{\text{crit}} = -\frac{16.0}{2(-2.0)} = 4.0\text{ s} as a quick mental check to verify your calculus derivative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the power rule to x(t)=−2.0t2+16.0t+5.0x(t) = -2.0 t^2 + 16.0 t + 5.0: v(t)=dxdt=−2.0(2)t+16.0=−4.0t+16.0v(t) = \frac{dx}{dt} = -2.0(2)t + 16.0 = -4.0 t + 16.0.

  2. Set v(tcrit)=0v(t_{\text{crit}}) = 0: −4.0tcrit+16.0=0  ⟹  tcrit=4.0 s-4.0 t_{\text{crit}} + 16.0 = 0 \implies t_{\text{crit}} = 4.0\text{ s}.

  3. Calculate position at turnaround: x(4.0)=−2.0(16.0)+16.0(4.0)+5.0=37.0 mx(4.0) = -2.0(16.0) + 16.0(4.0) + 5.0 = 37.0\text{ m}.

  4. Evaluate velocity at t=6.0 st = 6.0\text{ s}: v(6.0)=−4.0(6.0)+16.0=−8.0 m/sv(6.0) = -4.0(6.0) + 16.0 = -8.0\text{ m/s}.

  5. Find total distance traveled: d1=∣x(4.0)−x(0)∣=∣37.0−5.0∣=32.0 md_1 = |x(4.0) - x(0)| = |37.0 - 5.0| = 32.0\text{ m}, and d2=∣x(10.0)−x(4.0)∣=∣−35.0−37.0∣=72.0 md_2 = |x(10.0) - x(4.0)| = |-35.0 - 37.0| = 72.0\text{ m}, giving dtotal=104.0 md_{\text{total}} = 104.0\text{ m}.

  6. Compute average speed: vavg, speed=104.0 m10.0 s=10.4 m/sv_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}.

Final answer

(a) tcrit=4.0 st_{\text{crit}} = 4.0\text{ s}, x(4.0)=37.0 mx(4.0) = 37.0\text{ m}; (b) v(6.0)=−8.0 m/sv(6.0) = -8.0\text{ m/s}; (c) vavg, speed=10.4 m/sv_{\text{avg, speed}} = 10.4\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice taking derivatives of polynomials step-by-step, explicitly writing out the factor from the exponent.

  • Use the vertex formula t=−b2at = -\frac{b}{2a} to cross-check turnaround times on quadratic kinematics problems.

  • Re-solve part (c) using the corrected turnaround time to reinforce calculating total distance from directional segments.

OverviewACEpath Teacher's Diagnosis

03 The student calculates average speed as the arithmetic mean of initial and final speeds rather than total distance divided by elapsed time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=−4.0t+16.0=0  ⟹  tcrit=4.0 sv(t) = -4.0t + 16.0 = 0 \implies t_{\text{crit}} = 4.0\text{ s}, x(4.0)=−2.0(16.0)+64.0+5.0=37.0 mx(4.0) = -2.0(16.0) + 64.0 + 5.0 = 37.0\text{ m}

  2. Step 2

    v(6.0)=−4.0(6.0)+16.0=−8.0 m/sv(6.0) = -4.0(6.0) + 16.0 = -8.0\text{ m/s}

  3. Step 3

    v(0)=16.0 m/sv(0) = 16.0\text{ m/s}, v(10.0)=−4.0(10.0)+16.0=−24.0 m/s  ⟹  speed(0)=16.0 m/sv(10.0) = -4.0(10.0) + 16.0 = -24.0\text{ m/s} \implies \text{speed}(0) = 16.0\text{ m/s}, speed(10.0)=24.0 m/s  ⟹  average speed=16.0+24.02=20.0 m/s\text{speed}(10.0) = 24.0\text{ m/s} \implies \text{average speed} = \frac{16.0 + 24.0}{2} = 20.0\text{ m/s}

    Correct

    d1=∣x(4.0)−x(0.0)∣=∣37.0−5.0∣=32.0 md_1 = |x(4.0) - x(0.0)| = |37.0 - 5.0| = 32.0\text{ m}, d2=∣x(10.0)−x(4.0)∣=∣−35.0−37.0∣=72.0 m  ⟹  dtotal=104.0 m  ⟹  vavg, speed=104.0 m10.0 s=10.4 m/sd_2 = |x(10.0) - x(4.0)| = |-35.0 - 37.0| = 72.0\text{ m} \implies d_{\text{total}} = 104.0\text{ m} \implies v_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}

    You took the arithmetic mean of the initial and final speeds, vi+vf2\frac{v_i + v_f}{2}, which is not the definition of average speed. Because the shuttle reverses direction, you must compute the total path length traveled along each segment and divide by the total elapsed time.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the time derivative of position to obtain velocity.

You accurately solved for the turnaround time by setting velocity to zero.

You evaluated the position and instantaneous velocity correctly in parts (a) and (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Averaging Endpoints for Average Speed

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that average speed can be found by taking the arithmetic average of the boundary speeds speedi+speedf2\frac{\text{speed}_i + \text{speed}_f}{2}. Average speed is always defined as total distance divided by total elapsed time (vavg, speed=dtotalΔtv_{\text{avg, speed}} = \frac{d_{\text{total}}}{\Delta t}). When an object changes direction, speed is not a linear function of time, so averaging the endpoints ignores the stop at the turnaround point and misrepresents the true rate of distance accumulated.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Average Speed
  • Average speed=Total distance traveledTotal time elapsed=dtotalΔt\text{Average speed} = \frac{\text{Total distance traveled}}{\text{Total time elapsed}} = \frac{d_{\text{total}}}{\Delta t}. It is never generally v1+v22\frac{v_1 + v_2}{2}.

  • Identify all turnaround points (v=0v = 0), split the motion into segments of constant direction, sum the absolute displacements ∣Δx∣|\Delta x| to find total distance, and divide by the total time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the initial position: x(0.0)=−2.0(0)2+16.0(0)+5.0=5.0 mx(0.0) = -2.0(0)^2 + 16.0(0) + 5.0 = 5.0\text{ m}.

  2. Find the turnaround position: x(4.0)=37.0 mx(4.0) = 37.0\text{ m}.

  3. Find the final position: x(10.0)=−2.0(10.0)2+16.0(10.0)+5.0=−35.0 mx(10.0) = -2.0(10.0)^2 + 16.0(10.0) + 5.0 = -35.0\text{ m}.

  4. Calculate forward distance: d1=∣37.0 m−5.0 m∣=32.0 md_1 = |37.0\text{ m} - 5.0\text{ m}| = 32.0\text{ m}.

  5. Calculate backward distance: d2=∣−35.0 m−37.0 m∣=72.0 md_2 = |-35.0\text{ m} - 37.0\text{ m}| = 72.0\text{ m}.

  6. Sum the segments: dtotal=32.0 m+72.0 m=104.0 md_{\text{total}} = 32.0\text{ m} + 72.0\text{ m} = 104.0\text{ m}.

  7. Divide by total time: vavg, speed=104.0 m10.0 s=10.4 m/sv_{\text{avg, speed}} = \frac{104.0\text{ m}}{10.0\text{ s}} = 10.4\text{ m/s}.

Final answer

(a) tcrit=4.0 st_{\text{crit}} = 4.0\text{ s}, x(4.0)=37.0 mx(4.0) = 37.0\text{ m}; (b) v(6.0)=−8.0 m/sv(6.0) = -8.0\text{ m/s}; (c) vavg, speed=10.4 m/sv_{\text{avg, speed}} = 10.4\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate total distance by splitting motion at every turnaround point (v(t)=0v(t) = 0).

  • Divide the total accumulated distance by total elapsed time to find average speed, never averaging speed values directly.

Lock it in

Similar question

01

A runner moves along a straight path with position x(t)=−t2+6tx(t) = -t^2 + 6t for t∈[0,5] st \in [0, 5]\text{ s} (in meters). Calculate the runner's average speed over this 5 s5\text{ s} interval.

Answer

v(t)=−2t+6=0  ⟹  tturn=3 sv(t) = -2t + 6 = 0 \implies t_{\text{turn}} = 3\text{ s}. Positions: x(0)=0 mx(0) = 0\text{ m}, x(3)=9 mx(3) = 9\text{ m}, x(5)=5 mx(5) = 5\text{ m}. Forward distance: ∣9−0∣=9 m|9 - 0| = 9\text{ m}. Return distance: ∣5−9∣=4 m|5 - 9| = 4\text{ m}. Total distance: dtotal=13 md_{\text{total}} = 13\text{ m}. Average speed =13 m5 s=2.6 m/s= \frac{13\text{ m}}{5\text{ s}} = 2.6\text{ m/s}.

02

A particle moves with velocity v(t)=3t2−12v(t) = 3t^2 - 12 along the xx-axis from t=0 st = 0\text{ s} to t=3 st = 3\text{ s}, with x(0)=0 mx(0) = 0\text{ m}. Find (a) the net displacement and (b) the average speed over the interval.

Answer

Position x(t)=t3−12tx(t) = t^3 - 12t. (a) Net displacement Δx=x(3)−x(0)=(27−36)−0=−9 m\Delta x = x(3) - x(0) = (27 - 36) - 0 = -9\text{ m}. (b) Turnaround occurs where v(t)=0  ⟹  t=2 sv(t) = 0 \implies t = 2\text{ s}. Positions: x(0)=0 mx(0) = 0\text{ m}, x(2)=−16 mx(2) = -16\text{ m}, x(3)=−9 mx(3) = -9\text{ m}. Leg 1: ∣−16−0∣=16 m|-16 - 0| = 16\text{ m}. Leg 2: ∣−9−(−16)∣=7 m|-9 - (-16)| = 7\text{ m}. Total distance =16+7=23 m= 16 + 7 = 23\text{ m}. Average speed =23 m3 s≈7.67 m/s= \frac{23\text{ m}}{3\text{ s}} \approx 7.67\text{ m/s}.

03

A drone's position is given by x(t)=t3−6t2+9t+2x(t) = t^3 - 6t^2 + 9t + 2 for t∈[0,4] st \in [0, 4]\text{ s}. Determine the drone's average speed over the entire interval.

Answer

Velocity v(t)=3t2−12t+9=3(t−1)(t−3)=0  ⟹  v(t) = 3t^2 - 12t + 9 = 3(t - 1)(t - 3) = 0 \implies reversals at t=1 st = 1\text{ s} and t=3 st = 3\text{ s}. Positions: x(0)=2 mx(0) = 2\text{ m}, x(1)=6 mx(1) = 6\text{ m}, x(3)=2 mx(3) = 2\text{ m}, x(4)=6 mx(4) = 6\text{ m}. Segments: d1=∣6−2∣=4 md_1 = |6 - 2| = 4\text{ m}, d2=∣2−6∣=4 md_2 = |2 - 6| = 4\text{ m}, d3=∣6−2∣=4 md_3 = |6 - 2| = 4\text{ m}. Total distance dtotal=4+4+4=12 md_{\text{total}} = 4 + 4 + 4 = 12\text{ m}. Average speed =12 m4 s=3.0 m/s= \frac{12\text{ m}}{4\text{ s}} = 3.0\text{ m/s}.

Loading workspace…