Resources
In a university physics laboratory experiment, two laboratory carts are mounted on a level, low-friction air track. Cart 1 has mass and is equipped with a digital force sensor. Cart 2 has mass and carries an identical synchronized digital force sensor. Each force sensor features a rubber bumper. Cart 1 is launched toward stationary Cart 2. During the collision, the force sensors record contact force data over time . Sensor 1 records the force exerted by Cart 2 on Cart 1, , and Sensor 2 records the force exerted by Cart 1 on Cart 2, . The peak force recorded by Sensor 1 is measured to be . (a) Predict the theoretical peak force magnitude and the total impulse recorded by Sensor 2 during this collision if the impulse on Cart 1 is measured to be . (b) Identify the Newton's third law pair recorded by the laboratory sensors and explain how the digitized force-time profiles and must relate at every discrete instant throughout the collision.
Answer and steps
Final answer
(a) Peak force magnitude on Sensor 2 is ; impulse ; (b) The pair consists of the contact force exerted by Cart 2 on Cart 1 () and the contact force exerted by Cart 1 on Cart 2 (). By Newton's third law, at every discrete instant , , meaning their force-versus-time curves are exact mirror reflections across the time axis with identical peak heights, widths, and integrated impulse areas of opposite sign.
Steps
Part (a): Determining Peak Force and Impulse on Sensor 2
- Apply Newton's Third Law to Instantaneous Forces Newton's third law states that whenever two bodies interact, the force exerted by the first body on the second is equal in magnitude and opposite in direction to the force exerted by the second body on the first at every instant of time: Along the one-dimensional line of motion:
- Peak Force Magnitude Because the magnitudes of the forces are identical at every moment during the contact: Therefore, the theoretical peak force magnitude recorded by Sensor 2 must be identical to that recorded by Sensor 1:
- Total Impulse on Sensor 2 Impulse is defined as the time integral of the force over the collision duration : Substituting : Given that the impulse on Cart 1 is :
Part (b): Action-Reaction Pair and Profile Comparison
-
Identifying the Newton's Third Law Pair The interaction pair consists of:
- : the contact force exerted by Cart 2 on Cart 1.
- : the contact force exerted by Cart 1 on Cart 2.
-
Relationship Between the Digitized Force-Time Profiles
- Instantaneous Equivalence: At every discrete sampling point across the interval , the sensors record equal and opposite values:
- Graphical Representation: The force-versus-time profile is an exact inverted reflection (mirror image across the time axis) of . Both profiles share the exact same duration (), the same symmetric or bell-shaped curve, identical peak magnitudes (), and equal area magnitudes under the curve (), with opposite signs.
Common Pitfall: A frequent misconception is that the more massive cart () or the stationary cart experiences a different force magnitude than the lighter, moving cart (). Newton's third law holds strictly regardless of mass differences, motion states, or velocities; unequal masses only result in different accelerations (), not different forces.
Typical errors
01 The student assumes force scales inversely with or depends directly on the cart masses rather than recognizing that contact forces are strictly equal and opposite by Newton's third law.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You divided the peak force by the mass ratio. By Newton's third law, the force magnitudes exerted between interacting objects are always equal, independent of their masses.
- Step 2Correct
Because the instantaneous forces are equal and opposite at every instant (), integrating over time gives equal and opposite total impulses (), with no factor of .
- Step 3
- Step 4Correct
You introduced a coefficient of based on mass. Newton's third law requires strictly, making the profile of an exact inverted mirror image of with a ratio.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and as the Newton's third law action-reaction pair.
You correctly accounted for the opposite directions of the interaction forces by using a negative sign for impulse and force.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNone. This is a conceptual misunderstanding rather than a calculation oversight.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that contact interaction forces scale with or depend on the mass ratio of the colliding objects. While acceleration depends on mass via Newton's second law (), the contact forces themselves are strictly equal in magnitude and opposite in direction at every instant according to Newton's third law.
REASONING PATH
Your ACEpath teacher’s suggested approach- Equal Magnitude Regardless of Mass
Whenever two bodies interact, at all times, no matter how much their masses or speeds differ.
Never scale contact interaction forces by mass ratios; set their magnitudes equal before computing kinematic results.
- Impulse Conservation Across Pairs
Because instantaneous forces are equal and opposite (), their time integrals satisfy .
Set the impulse delivered to one body equal in magnitude and opposite in sign to the impulse delivered to the other.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's third law to the contact force: at all instants, so .
Integrate both sides over the collision duration : .
Relate the instantaneous profiles: across the entire collision duration.
(a) Peak force magnitude ; total impulse . (b) The pair is and ; at every discrete instant , .
02 The student confuses the sign of impulse by omitting the opposite direction requirement of Newton's third law and equating impulse directly.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because Newton's third law specifies forces of equal magnitude but opposite direction, the contact force vectors satisfy . Integrating over the collision duration gives , which equals rather than .
- Step 3
Action-reaction pair: and
- Step 4
at every instant, so the two sensor profiles are identical in both magnitude and sign.
Correctat every instant, so the two sensor profiles are reflections across the time axis (equal magnitude, opposite sign).
Action-reaction forces act in opposite directions along the line of collision. Along a chosen coordinate axis, the instantaneous forces satisfy , meaning the force-time graphs are inverted mirror images across the time axis with opposite algebraic signs.
WHAT YOU DID WELL
Compliments from Your TeacherYou recognized that Newton's third law guarantees equal force magnitudes regardless of the carts' unequal masses.
You correctly identified the contact forces between the two colliding carts as the action-reaction pair.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misconception regarding the vector nature and sign relationship of action-reaction pairs.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated Newton's third law as an equality of scalar quantities () rather than an equality of vectors with opposite directions (). Consequently, you preserved the negative sign for the impulse on Cart 2 and concluded that the force profiles share the same algebraic sign.
REASONING PATH
Your ACEpath teacher’s suggested approach- Vector Nature of Newton's Third Law
Newton's third law states . Along any 1D axis, .
Always attach an explicit negative sign when equating 1D component forces or impulses of an action-reaction pair.
- Impulse Conservation and Action-Reaction Pairs
, so .
When given the impulse on one colliding body, reverse its sign to find the impulse delivered to the other interacting body.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's third law in one dimension: for every instant .
Integrate both sides with respect to time over the collision duration: .
Substitute : .
Describe the graphical profiles: Since , the plots have identical durations and peak magnitudes (), but opposite signs, forming mirror images across the horizontal time axis.
(a) Theoretical peak force magnitude is ; total impulse . (b) The pair is and ; they satisfy at every instant, producing profiles that are equal in magnitude but opposite in sign (inverted reflections across the time axis).
03 The student calculates the peak force by dividing impulse by the total collision duration, confusing average force with peak force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You divided impulse by collision duration, which gives the time-averaged force , not the peak force. Because Newton's third law requires at every discrete instant , the maximum force recorded by Sensor 2 must directly equal the maximum force recorded by Sensor 1.
- Step 3
Action-reaction pair: and At every instant , , meaning equal magnitudes and opposite directions.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly determined that the impulse on Cart 2 is .
You correctly identified and as the Newton's third law pair.
You correctly stated the instantaneous relation .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the peak force variable into the definition for average force, calculating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating collision force profiles as constant rectangles rather than time-varying curves leads to conflating peak force with average force, missing that Newton's third law directly equates the instantaneous extrema of interacting bodies.
REASONING PATH
Your ACEpath teacher’s suggested approach- Average Force vs. Peak Force
, whereas .
For any curved or bell-shaped force-time pulse, recognize that and cannot be found by simply dividing by .
- Pointwise Newton's Third Law
holds identically at every instant , including at .
To find the peak force on the second object, set it equal to the known peak force magnitude on the first object directly.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply Newton's third law at the moment of peak contact force: .
Directly read or equate the peak magnitude from Sensor 1: .
(a) Peak force magnitude ; total impulse . (b) The pair consists of and ; at every instant , .
Lock it in
Does the magnitude of the force exerted by object A on object B ever differ from that exerted by B on A if ?
No. By Newton's third law, at every instant regardless of mass, velocity, or collision state.
Similar question
A billiard ball strikes a rigid stationary block. During contact, the ball exerts an average force of on the block. What is the magnitude of the average force exerted by the block on the ball?
Answer
. By Newton's third law, the contact force exerted by the block on the ball has the exact same magnitude as the force exerted by the ball on the block, regardless of the mass ratio.
In a dynamic crash test, Car A () collides with stationary Truck B (). Accelerometers record that Car A undergoes an average deceleration magnitude of during the impact. (a) Determine the average force magnitude exerted on Truck B. (b) Find the acceleration magnitude of Truck B during the collision.
Answer
(a) ; (b) . First, calculate the force on Car A: . By Newton's third law, the force on Truck B is identical in magnitude (). Truck B's acceleration is .
Two gliders on an air track carry repulsive magnets. Glider 1 () and Glider 2 () repel each other without touching. If the force-time profile experienced by Glider 1 is described by for , write the complete expression for and calculate the ratio of their final speeds after starting from rest.
Answer
; speed ratio . By Newton's third law, at every instant. The impulses are equal in magnitude: . Therefore, , giving .