Resources

An engineering model of a test sled uses non-standard surveying units. An incline is graded with a vertical rise of 30.0 cm30.0\text{ cm} per 1.00 m1.00\text{ m} of horizontal run. The sled has a mass of m=4500 gm = 4500\text{ g}. A coordinate system is chosen aligned with the track, where +x+x points along the track upward and +y+y points perpendicular to the track upward. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine: (a) the incline angle θ\theta in degrees, (b) the gravitational force vector F⃗g\vec{F}_g in standard SI units (Newtons) expressed in components (Fgx,Fgy)(F_{gx}, F_{gy}) along the track axes, and (c) the magnitude of a towing force FtowF_{\text{tow}} directed along +x+x required to pull the sled up the incline at a constant speed of v=7.20 km/hv = 7.20\text{ km/h} against a kinetic friction force of fk=5.80 Nf_k = 5.80\text{ N}.

Answer and steps

Final answer

(a) θ=16.7∘\theta = 16.7^\circ, (b) F⃗g=(−12.7 N,−42.2 N)\vec{F}_g = (-12.7\text{ N}, -42.2\text{ N}), (c) Ftow=18.5 NF_{\text{tow}} = 18.5\text{ N}

Steps

Part (a): Determine the Incline Angle θ\theta

  1. Convert the given rise and run to consistent units:

    • Vertical rise: Δyincline=30.0 cm=0.300 m\Delta y_{\text{incline}} = 30.0\text{ cm} = 0.300\text{ m}
    • Horizontal run: Δxincline=1.00 m\Delta x_{\text{incline}} = 1.00\text{ m}
  2. Calculate the angle of inclination θ\theta: The slope of the incline is the tangent of the angle with the horizontal: tan⁡θ=riserun=0.300 m1.00 m=0.300\tan\theta = \frac{\text{rise}}{\text{run}} = \frac{0.300\text{ m}}{1.00\text{ m}} = 0.300

    Taking the inverse tangent: θ=arctan⁡(0.300)≈16.7∘\theta = \arctan(0.300) \approx 16.7^\circ


Part (b): Find the Components of the Gravitational Force Vector F⃗g\vec{F}_g

  1. Convert the mass to standard SI units and find the weight magnitude:

    • Mass: m=4500 g=4.50 kgm = 4500\text{ g} = 4.50\text{ kg}
    • Total gravitational force: Fg=mg=(4.50 kg)(9.80 m/s2)=44.1 NF_g = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}
  2. Resolve F⃗g\vec{F}_g along the chosen coordinate axes:

    • The +x+x-axis points parallel to the incline, directed upward.
    • The +y+y-axis points perpendicular to the incline, directed upward away from the surface.

    Because gravity acts vertically downward, it pulls both down the slope (negative xx-direction) and into the slope (negative yy-direction):

    • Parallel component: Fgx=−mgsin⁡θ=−(44.1 N)sin⁡(16.699∘)≈−12.7 NF_{gx} = -mg \sin\theta = -(44.1\text{ N})\sin(16.699^\circ) \approx -12.7\text{ N}
    • Perpendicular component: Fgy=−mgcos⁡θ=−(44.1 N)cos⁡(16.699∘)≈−42.2 NF_{gy} = -mg \cos\theta = -(44.1\text{ N})\cos(16.699^\circ) \approx -42.2\text{ N}

    In component form: F⃗g=(−12.7 N,−42.2 N)\vec{F}_g = (-12.7\text{ N}, -42.2\text{ N})


Part (c): Determine the Towing Force FtowF_{\text{tow}}

  1. Identify the forces acting along the xx-axis:

    • Towing force FtowF_{\text{tow}} in the +x+x-direction (up the incline).
    • Component of gravity Fgx=−12.7 NF_{gx} = -12.7\text{ N} opposing upward motion.
    • Kinetic friction force fk=5.80 Nf_k = 5.80\text{ N}, which opposes the upward motion and therefore acts in the −x-x-direction.
  2. Apply Newton's first law for constant velocity: Since the sled moves at a constant speed (v=7.20 km/h=2.00 m/sv = 7.20\text{ km/h} = 2.00\text{ m/s}), the acceleration along the track is zero (ax=0a_x = 0): ∑Fx=Ftow−fk+Fgx=0\sum F_x = F_{\text{tow}} - f_k + F_{gx} = 0 Ftow−fk−mgsin⁡θ=0F_{\text{tow}} - f_k - mg\sin\theta = 0
  3. Solve for FtowF_{\text{tow}}: Ftow=fk+mgsin⁡θ=5.80 N+12.67 N=18.47 N≈18.5 NF_{\text{tow}} = f_k + mg\sin\theta = 5.80\text{ N} + 12.67\text{ N} = 18.47\text{ N} \approx 18.5\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sine and cosine components when resolving the gravitational force along and perpendicular to the inclined track.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tan⁡θ=0.3001.00=0.300  ⟹  θ=arctan⁡(0.300)=16.7∘\tan\theta = \frac{0.300}{1.00} = 0.300 \implies \theta = \arctan(0.300) = 16.7^\circ

  2. Step 2

    m=4.50 kg  ⟹  Fg=4.50⋅9.80=44.1 Nm = 4.50\text{ kg} \implies F_g = 4.50 \cdot 9.80 = 44.1\text{ N}

  3. Step 3

    Fgx=−44.1⋅cos⁡(16.7∘)=−42.2 N  ⟹  Fgy=−44.1⋅sin⁡(16.7∘)=−12.7 N  ⟹  (Fgx,Fgy)=(−42.2 N,−12.7 N)F_{gx} = -44.1 \cdot \cos(16.7^\circ) = -42.2\text{ N} \implies F_{gy} = -44.1 \cdot \sin(16.7^\circ) = -12.7\text{ N} \implies (F_{gx}, F_{gy}) = (-42.2\text{ N}, -12.7\text{ N})

    Correct

    Fgx=−mgsin⁡θ=−44.1sin⁡(16.7∘)≈−12.7 N  ⟹  Fgy=−mgcos⁡θ=−44.1cos⁡(16.7∘)≈−42.2 NF_{gx} = -mg\sin\theta = -44.1\sin(16.7^\circ) \approx -12.7\text{ N} \implies F_{gy} = -mg\cos\theta = -44.1\cos(16.7^\circ) \approx -42.2\text{ N}

    Because the incline angle θ\theta is measured from the horizontal, the angle between the vertical gravity vector and the perpendicular (yy) axis is θ\theta. Therefore, the perpendicular component uses cosine (Fgy=−mgcos⁡θF_{gy} = -mg\cos\theta) and the parallel component uses sine (Fgx=−mgsin⁡θF_{gx} = -mg\sin\theta).

  4. Step 4

    ∑Fx=Ftow−∣Fgx∣−fk=0  ⟹  Ftow=42.2+5.80=48.0 N\sum F_x = F_{\text{tow}} - |F_{gx}| - f_k = 0 \implies F_{\text{tow}} = 42.2 + 5.80 = 48.0\text{ N}

    Correct

    ∑Fx=Ftow−fk+Fgx=0  ⟹  Ftow=fk+mgsin⁡θ=5.80 N+12.67 N≈18.5 N\sum F_x = F_{\text{tow}} - f_k + F_{gx} = 0 \implies F_{\text{tow}} = f_k + mg\sin\theta = 5.80\text{ N} + 12.67\text{ N} \approx 18.5\text{ N}

    Your equilibrium equation along the track is conceptually sound, but substituting the incorrect parallel gravity component from Step 3 produced an incorrect towing force.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted units accurately for both the geometric slope and the sled mass.

You recognized that moving at constant speed implies zero acceleration and balanced the forces along the xx-axis.

You correctly assigned negative signs to both gravitational components relative to the upward coordinate system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric component swap on an inclined plane

You associated the parallel xx-component with cosine and the perpendicular yy-component with sine.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely relied on the standard horizontal-plane convention where xx-components take cosine and yy-components take sine, forgetting that on an incline tilted at θ\theta from the horizontal, the angle θ\theta appears between the vertical gravity vector and the normal axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity check with limiting angles
  • If the incline angle approaches zero (flat ground), the force pulling an object down the ramp must vanish (Fgx→0F_{gx} \to 0) and the normal support force must equal the full weight (∣Fgy∣→mg|F_{gy}| \to mg).

  • Test θ=0∘\theta = 0^\circ: sin⁡(0∘)=0\sin(0^\circ) = 0, confirming that Fgx=−mgsin⁡θF_{gx} = -mg\sin\theta, whereas cos⁡(0∘)=1\cos(0^\circ) = 1, confirming that Fgy=−mgcos⁡θF_{gy} = -mg\cos\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angle θ=16.7∘\theta = 16.7^\circ between the downward vertical vector F⃗g\vec{F}_g and the negative yy-axis (perpendicular to the incline).

  2. Resolve the components using correct right-triangle trigonometry: Fgx=−mgsin⁡θ=−(44.1 N)sin⁡(16.7∘)≈−12.7 NF_{gx} = -mg\sin\theta = -(44.1\text{ N})\sin(16.7^\circ) \approx -12.7\text{ N}, and Fgy=−mgcos⁡θ=−(44.1 N)cos⁡(16.7∘)≈−42.2 NF_{gy} = -mg\cos\theta = -(44.1\text{ N})\cos(16.7^\circ) \approx -42.2\text{ N}.

  3. Substitute the corrected parallel component into the force balance along +x+x: Ftow=fk−Fgx=5.80 N+12.67 N=18.47 N≈18.5 NF_{\text{tow}} = f_k - F_{gx} = 5.80\text{ N} + 12.67\text{ N} = 18.47\text{ N} \approx 18.5\text{ N}.

Final answer

(a) θ=16.7∘\theta = 16.7^\circ, (b) F⃗g=(−12.7 N,−42.2 N)\vec{F}_g = (-12.7\text{ N}, -42.2\text{ N}), (c) Ftow=18.5 NF_{\text{tow}} = 18.5\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the right triangle formed by F⃗g\vec{F}_g and its components, marking the angle θ\theta between F⃗g\vec{F}_g and the perpendicular axis.

  • Always test θ=0∘\theta = 0^\circ before calculating to ensure the parallel component vanishes with sine.

OverviewACEpath Teacher's Diagnosis

02 The student neglects to convert mass from grams to kilograms before calculating the gravitational force, leading to a force that is 1000 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tan⁡θ=0.3001.00=0.300  ⟹  θ=16.7∘\tan\theta = \frac{0.300}{1.00} = 0.300 \implies \theta = 16.7^\circ

  2. Step 2

    Fg=4500⋅9.80=44100 N  ⟹  Fgx=−44100⋅sin⁡(16.7∘)=−12679 N  ⟹  Fgy=−44100⋅cos⁡(16.7∘)=−42240 N  ⟹  (Fgx,Fgy)=(−12700 N,−42200 N)F_g = 4500 \cdot 9.80 = 44100\text{ N} \implies F_{gx} = -44100 \cdot \sin(16.7^\circ) = -12679\text{ N} \implies F_{gy} = -44100 \cdot \cos(16.7^\circ) = -42240\text{ N} \implies (F_{gx}, F_{gy}) = (-12700\text{ N}, -42200\text{ N})

    Correct

    m=4500 g=4.50 kg  ⟹  Fg=mg=(4.50 kg)(9.80 m/s2)=44.1 N  ⟹  Fgx=−44.1sin⁡(16.7∘)≈−12.7 N,  Fgy=−44.1cos⁡(16.7∘)≈−42.2 Nm = 4500\text{ g} = 4.50\text{ kg} \implies F_g = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N} \implies F_{gx} = -44.1\sin(16.7^\circ) \approx -12.7\text{ N},\; F_{gy} = -44.1\cos(16.7^\circ) \approx -42.2\text{ N}

    You correctly identified the directions and trigonometric components for the tilted axes, but the base SI unit for mass is kilograms (1 kg=1000 g1\text{ kg} = 1000\text{ g}). Substituting 4500 g4500\text{ g} directly into mgmg made the weight 10001000 times too large.

  3. Step 3

    Ftow−12679−5.80=0  ⟹  Ftow=12685 NF_{\text{tow}} - 12679 - 5.80 = 0 \implies F_{\text{tow}} = 12685\text{ N}

    Correct

    ∑Fx=Ftow−fk−mgsin⁡θ=0  ⟹  Ftow=5.80 N+12.67 N≈18.5 N\sum F_x = F_{\text{tow}} - f_k - mg\sin\theta = 0 \implies F_{\text{tow}} = 5.80\text{ N} + 12.67\text{ N} \approx 18.5\text{ N}

    Your Newton's first law equilibrium setup is correct, but your final answer is affected by the unconverted mass carried over from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the angle of inclination from the rise-to-run ratio.

You chose the correct trigonometric projections and negative signs for the gravity vector along the tilted track axes.

You set up the constant-speed dynamic equilibrium equation along the incline correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing SI unit conversion for mass

You substituted m=4500m = 4500 directly instead of converting to 4.50 kg4.50\text{ kg}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Forgetting that the Newton is defined as 1 N=1 kg⋅m/s21\text{ N} = 1\text{ kg}\cdot\text{m/s}^2, requiring mass to always be expressed in kilograms before applying force equations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Verification for Base Quantities
  • A Newton is 1 kg⋅m/s21\text{ kg}\cdot\text{m/s}^2. Therefore, any formula giving Newtons requires mass in kilograms, length in meters, and time in seconds.

  • Before multiplying m×gm \times g, check whether the mass is given in grams or kilograms and convert using m (kg)=m (g)1000m\,(\text{kg}) = \frac{m\,(\text{g})}{1000}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the sled's mass to kilograms: m=4500 g1000 g/kg=4.50 kgm = \frac{4500\text{ g}}{1000\text{ g/kg}} = 4.50\text{ kg}.

  2. Recompute the weight magnitude: Fg=(4.50 kg)(9.80 m/s2)=44.1 NF_g = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N}.

  3. Resolve the components along the track: Fgx=−44.1sin⁡(16.70∘)≈−12.7 NF_{gx} = -44.1\sin(16.70^\circ) \approx -12.7\text{ N} and Fgy=−44.1cos⁡(16.70∘)≈−42.2 NF_{gy} = -44.1\cos(16.70^\circ) \approx -42.2\text{ N}.

  4. Recalculate the towing force: Ftow=fk−Fgx=5.80 N+12.67 N≈18.5 NF_{\text{tow}} = f_k - F_{gx} = 5.80\text{ N} + 12.67\text{ N} \approx 18.5\text{ N}.

Final answer

(a) θ=16.7∘\theta = 16.7^\circ, (b) F⃗g=(−12.7 N,−42.2 N)\vec{F}_g = (-12.7\text{ N}, -42.2\text{ N}), (c) Ftow=18.5 NF_{\text{tow}} = 18.5\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the units alongside every numerical substitution to catch non-standard units early.

  • Practice decomposing vectors on inclined coordinate frames using kilograms for all mass terms.

OverviewACEpath Teacher's Diagnosis

03 The student treats the rise-over-run slope ratio as the sine of the angle instead of the tangent.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡θ=0.3001.00=0.300  ⟹  θ=arcsin⁡(0.300)=17.5∘\sin\theta = \frac{0.300}{1.00} = 0.300 \implies \theta = \arcsin(0.300) = 17.5^\circ

    Correct

    tan⁡θ=riserun=0.300 m1.00 m=0.300  ⟹  θ=arctan⁡(0.300)≈16.7∘\tan\theta = \frac{\text{rise}}{\text{run}} = \frac{0.300\text{ m}}{1.00\text{ m}} = 0.300 \implies \theta = \arctan(0.300) \approx 16.7^\circ

    You defined the slope ratio as the sine of the angle instead of the tangent. In an incline defined by vertical rise and horizontal run, the rise is the opposite side and the horizontal run is the adjacent side of the right triangle, so tan⁡θ=riserun\tan\theta = \frac{\text{rise}}{\text{run}}.

  2. Step 2

    m=4.50 kg  ⟹  Fg=4.50⋅9.80=44.1 N  ⟹  Fgx=−44.1⋅sin⁡(17.5∘)=−13.3 N  ⟹  Fgy=−44.1⋅cos⁡(17.5∘)=−42.1 N  ⟹  (Fgx,Fgy)=(−13.3 N,−42.1 N)m = 4.50\text{ kg} \implies F_g = 4.50 \cdot 9.80 = 44.1\text{ N} \implies F_{gx} = -44.1\cdot\sin(17.5^\circ) = -13.3\text{ N} \implies F_{gy} = -44.1\cdot\cos(17.5^\circ) = -42.1\text{ N} \implies (F_{gx}, F_{gy}) = (-13.3\text{ N}, -42.1\text{ N})

    Correct

    Fg=mg=(4.50 kg)(9.80 m/s2)=44.1 N  ⟹  Fgx=−mgsin⁡(16.7∘)≈−12.7 N,  Fgy=−mgcos⁡(16.7∘)≈−42.2 N  ⟹  F⃗g=(−12.7 N,−42.2 N)F_g = mg = (4.50\text{ kg})(9.80\text{ m/s}^2) = 44.1\text{ N} \implies F_{gx} = -mg\sin(16.7^\circ) \approx -12.7\text{ N},\; F_{gy} = -mg\cos(16.7^\circ) \approx -42.2\text{ N} \implies \vec{F}_g = (-12.7\text{ N}, -42.2\text{ N})

    You correctly converted the mass to kilograms, calculated the weight magnitude, and assigned negative signs for both components along the tilted axes. The numerical values are affected only by the earlier angle error.

  3. Step 3

    ∑Fx=Ftow−13.3−5.80=0  ⟹  Ftow=19.1 N\sum F_x = F_{\text{tow}} - 13.3 - 5.80 = 0 \implies F_{\text{tow}} = 19.1\text{ N}

    Correct

    ∑Fx=Ftow−fk+Fgx=0  ⟹  Ftow=5.80 N+12.67 N≈18.5 N\sum F_x = F_{\text{tow}} - f_k + F_{gx} = 0 \implies F_{\text{tow}} = 5.80\text{ N} + 12.67\text{ N} \approx 18.5\text{ N}

    You correctly set the net force along the track to zero for constant velocity and added the opposing downhill gravity component and friction force. Your final answer is off only because of the propagated angle error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted grams to kilograms and centimeters to meters.

You properly aligned the coordinate axes with the incline and assigned negative signs to both gravity components.

You correctly set up the equilibrium equation along the incline for constant speed motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Ratio Misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the horizontal run with the hypotenuse (track length) when determining the slope angle, treating riserun\frac{\text{rise}}{\text{run}} as sin⁡θ\sin\theta rather than tan⁡θ\tan\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rise vs. Run Trigonometry
  • Vertical rise is opposite to θ\theta; horizontal run is adjacent to θ\theta. The hypotenuse is the slope length along the ramp.

  • Always sketch the right triangle formed by the grade. Set tan⁡θ=riserun\tan\theta = \frac{\text{rise}}{\text{run}} unless the problem explicitly specifies distance measured along the ramp.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. tan⁡θ=0.300 m1.00 m=0.300  ⟹  θ=arctan⁡(0.300)≈16.70∘\tan\theta = \frac{0.300\text{ m}}{1.00\text{ m}} = 0.300 \implies \theta = \arctan(0.300) \approx 16.70^\circ

  2. Fgx=−mgsin⁡(16.70∘)=−(4.50 kg)(9.80 m/s2)sin⁡(16.70∘)≈−12.7 NF_{gx} = -mg\sin(16.70^\circ) = -(4.50\text{ kg})(9.80\text{ m/s}^2)\sin(16.70^\circ) \approx -12.7\text{ N}

  3. Fgy=−mgcos⁡(16.70∘)=−(4.50 kg)(9.80 m/s2)cos⁡(16.70∘)≈−42.2 NF_{gy} = -mg\cos(16.70^\circ) = -(4.50\text{ kg})(9.80\text{ m/s}^2)\cos(16.70^\circ) \approx -42.2\text{ N}

  4. Ftow=fk−Fgx=5.80 N+12.67 N≈18.5 NF_{\text{tow}} = f_k - F_{gx} = 5.80\text{ N} + 12.67\text{ N} \approx 18.5\text{ N}

Final answer

(a) θ=16.7∘\theta = 16.7^\circ, (b) F⃗g=(−12.7 N,−42.2 N)\vec{F}_g = (-12.7\text{ N}, -42.2\text{ N}), (c) Ftow=18.5 NF_{\text{tow}} = 18.5\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw and label the right triangle for the incline before writing trigonometric ratios, clearly marking the horizontal run as the adjacent side.

  • Practice identifying whether a given length is the horizontal run (adjacent, giving tangent) or the track surface distance (hypotenuse, giving sine).

Lock it in

Similar question

01

A 2.00 kg2.00\text{ kg} block rests on a frictionless ramp inclined at 30.0∘30.0^\circ above the horizontal. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the magnitude of the gravitational force component accelerating the block down the ramp.

Answer

Fg,∥=mgsin⁡θ=(2.00 kg)(9.80 m/s2)sin⁡(30.0∘)=9.80 NF_{g,\parallel} = mg\sin\theta = (2.00\text{ kg})(9.80\text{ m/s}^2)\sin(30.0^\circ) = 9.80\text{ N}.

02

A crate of mass 15.0 kg15.0\text{ kg} is held stationary on a 20.0∘20.0^\circ incline by static friction. Determine: (a) the normal force exerted by the ramp on the crate, and (b) the magnitude of the static friction force acting on the crate. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

(a) FN=mgcos⁡θ=(15.0)(9.80)cos⁡(20.0∘)≈138 NF_N = mg\cos\theta = (15.0)(9.80)\cos(20.0^\circ) \approx 138\text{ N}. (b) fs=mgsin⁡θ=(15.0)(9.80)sin⁡(20.0∘)≈50.3 Nf_s = mg\sin\theta = (15.0)(9.80)\sin(20.0^\circ) \approx 50.3\text{ N}.

03

A toy cart with mass m=800 gm = 800\text{ g} is pulled up a 25.0∘25.0^\circ ramp at constant velocity by a string oriented parallel to the ramp. A kinetic friction force of 1.20 N1.20\text{ N} opposes the motion. Calculate the tension TT in the string using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

m=0.800 kgm = 0.800\text{ kg}. In equilibrium along the ramp, T=fk+mgsin⁡θ=1.20 N+(0.800 kg)(9.80 m/s2)sin⁡(25.0∘)=1.20 N+3.31 N=4.51 NT = f_k + mg\sin\theta = 1.20\text{ N} + (0.800\text{ kg})(9.80\text{ m/s}^2)\sin(25.0^\circ) = 1.20\text{ N} + 3.31\text{ N} = 4.51\text{ N}.

Loading workspace…