Resources
In an optical bench laboratory experiment to determine the focal length of a concave spherical mirror, a student mounts an illuminated cross-wire reticle object on an optical rail. A white projection card is shifted until a crisp, inverted real image forms on the card. The tracked rail positions (measured along a metric track from a fixed zero point) are: Mirror vertex position , Object reticle position , and Screen image position . (a) Compute the experimental values for and . (b) Calculate the focal length and the radius of curvature . (c) If the manufacturer's nominal stamped focal length is , calculate the percentage error of this experimental measurement.
Answer and steps
Final answer
(a) , ; (b) , ; (c) .
Steps
Part (a): Determine Object and Image Distances
On an optical rail, distances between components are calculated by taking the absolute difference between their rail positions relative to the mirror's vertex :
- Object distance ():
The distance from the mirror vertex to the illuminated object is: - Image distance ():
Because the real, inverted image is focused sharply on a physical screen on the reflective side of the mirror, the image distance is positive:
Part (b): Calculate the Focal Length and Radius of Curvature
-
Mirror Equation:
The relationship between focal length , object distance , and image distance is given by the spherical mirror formula:Substitute the values of and :
- Radius of Curvature ():
For a spherical mirror under the paraxial approximation, the center of curvature lies at twice the focal distance:
Part (c): Percentage Error Calculation
The percentage error compares the experimentally determined value to the accepted true value :
Substitute and :
Typical errors
01 The student confuses the bench coordinate difference between the object and screen with the image distance relative to the mirror, calculating di as the object-to-screen distance.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You subtracted the object position () from the screen position () instead of measuring relative to the mirror vertex (). In optics formulas, both and are referenced to the optical element's vertex.
- Step 3Correct
Your algebra and use of and were mathematically sound, but your numerical results were affected by the incorrect value of .
- Step 4Correct
You applied the percent error formula correctly, but the result was propagated from the incorrect experimental focal length.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the object distance from the optical rail coordinates.
You correctly set up and solved the spherical mirror equation .
You applied the radius of curvature relation properly.
You set up the percentage error formula accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the adjacent component separation (object-to-screen distance ) with the optical image distance (), forgetting that all standard object and image distances must be measured from the vertex of the mirror.
REASONING PATH
Your ACEpath teacher’s suggested approach- Optical Bench Origin Check
Every optical distance ( and ) is measured relative to the mirror vertex position , never between the object and the screen.
Always compute and before substituting into the mirror formula.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) , ; (b) , ; (c)
02 The student incorrectly adds the reciprocals directly by summing denominators (1/f = 1/do + 1/di implies f = do + di).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You correctly substituted and into the mirror formula, but you inverted the equation by directly adding the denominators. Because , you must find a common denominator before inverting: , so .
- Step 3Correct
You correctly applied the relationship , but your numerical result was affected by the incorrect value of from the previous step.
- Step 4Correct
You used the standard percentage error formula correctly, but your calculation propagated the incorrect focal length.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the object and image distances from the bench positions.
You selected the correct spherical mirror equation .
You correctly applied the relationship between the radius of curvature and focal length ().
You correctly set up the percentage error formula.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeAdding the denominators directly instead of combining fractions with a common denominator first.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that taking the reciprocal of a sum of fractions is equal to the sum of their reciprocals, confusing with .
REASONING PATH
Your ACEpath teacher’s suggested approach- Reciprocal Addition Property
, which means that the reciprocal is , never .
Combine the right-hand fractions into a single fraction before flipping both sides to solve for .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind a common denominator: .
Invert both sides: .
Calculate radius of curvature: .
Compute percentage error: .
(a) , ; (b) , ; (c)
03 The student misremembers the relationship between focal length and radius of curvature as R = f / 2 instead of R = 2f.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The radius of curvature of a spherical mirror is twice its focal length (), not half of it ().
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately measured the distances from the mirror vertex along the optical rail.
You correctly used the mirror equation with proper common denominators.
You correctly applied the relative error formula to evaluate experimental uncertainty.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the relationship by isolating as instead of multiplying by 2 to get . Geometrically, the focal point is located halfway between the mirror vertex and the center of curvature, meaning the center of curvature is farther from the mirror than the focus.
REASONING PATH
Your ACEpath teacher’s suggested approach- Focal Length vs. Radius of Curvature
For a spherical mirror under paraxial approximation, , which rearranges to .
Always check that the radius of curvature is greater than the focal length .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the geometric definition: the center of curvature is at distance from vertex , while the focus lies midway at distance .
Rearrange for radius of curvature: .
Substitute : .
(a) , ; (b) , ; (c)
Lock it in
On an optical bench with components at coordinates (mirror), (object), and (screen), how is the image distance defined?
. In geometric optics, all object and image distances must be measured relative to the optical element (the mirror vertex), not between the object and screen.
Similar question
A concave mirror is clamped at on an optical rail. An illuminated object is at , and a sharp real image forms on a screen at . Find the experimental focal length .
Answer
. First find distances from the mirror vertex: and . Then apply , giving .
In a mirror lab, a concave mirror is positioned at . An object is placed at . A sharp image forms on a card placed at . (a) Calculate . (b) If the accepted focal length is , calculate the percentage error.
Answer
(a) ; (b) . Key steps: , . . .
On an optical rail, the mirror is located at , an object is at , and a real image is projected onto a screen at (light travels right-to-left toward the mirror, then reflects leftward). Determine , , and the mirror's radius of curvature .
Answer
, , and . Key steps: Distances are absolute differences from the vertex : , . Using , we get , so .