Resources

In a double-slit experiment, the slit separation is specified as d=250 μmd = 250\ \mu\text{m}, and the viewing screen is placed at a distance of L=185 cmL = 185\text{ cm}. The light source has a wavelength expressed in spectroscopic wave numbers as νˉ=1.85×104 cm−1\bar{\nu} = 1.85\times 10^4\text{ cm}^{-1}. Convert the wave number to wavelength in nanometers, and determine the fringe separation Δy\Delta y between adjacent dark fringes on the screen in millimeters.

Answer and steps

Final answer

λ=541 nm\lambda = 541\text{ nm}; Δy=4.00 mm\Delta y = 4.00\text{ mm}

Steps

01

Convert the wave number to wavelength in nanometers

In spectroscopy, the wave number νˉ\bar{\nu} represents the number of waves per unit length and is defined as the reciprocal of the wavelength: νˉ=1λ\bar{\nu} = \frac{1}{\lambda}

Rearranging to solve for the wavelength λ\lambda: λ=1νˉ=11.85×104 cm−1≈5.4054×10−5 cm\lambda = \frac{1}{\bar{\nu}} = \frac{1}{1.85 \times 10^4\text{ cm}^{-1}} \approx 5.4054 \times 10^{-5}\text{ cm}

Convert this value into nanometers (1 cm=107 nm1\text{ cm} = 10^7\text{ nm} or 1 nm=10−7 cm1\text{ nm} = 10^{-7}\text{ cm}): λ=5.4054×10−5 cm×107 nm1 cm≈541 nm\lambda = 5.4054 \times 10^{-5}\text{ cm} \times \frac{10^7\text{ nm}}{1\text{ cm}} \approx 541\text{ nm}


02

Determine the fringe separation Δy\Delta y

In Young's double-slit interference pattern, the separation Δy\Delta y between two adjacent bright fringes (or two adjacent dark fringes) on a distant screen is given by: Δy=λLd\Delta y = \frac{\lambda L}{d}

Before substituting the values, express all physical quantities in standard SI units (meters):

  • λ=5.4054×10−7 m\lambda = 5.4054 \times 10^{-7}\text{ m}
  • L=185 cm=1.85 mL = 185\text{ cm} = 1.85\text{ m}
  • d=250 μm=2.50×10−4 md = 250\ \mu\text{m} = 2.50 \times 10^{-4}\text{ m}

Substitute these values into the fringe-spacing equation: Δy=(5.4054×10−7 m)(1.85 m)2.50×10−4 m\Delta y = \frac{(5.4054 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}}

Δy=1.0000×10−6 m22.50×10−4 m=4.00×10−3 m=4.00 mm\Delta y = \frac{1.0000 \times 10^{-6}\text{ m}^2}{2.50 \times 10^{-4}\text{ m}} = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}

Common Pitfall: Always convert every parameter (λ\lambda, LL, and dd) into a single consistent base unit (such as meters) before computing, as mixing centimeters, micrometers, and nanometers directly inside the formula leads to incorrect powers of ten.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the wave number with wavelength directly, setting λ equal to the numerical value of ν̄ instead of taking its reciprocal.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    λ=νˉ=1.85×104 cm−1=1.85×104×107 nm=1.85×1011 nm\lambda = \bar{\nu} = 1.85 \times 10^4\text{ cm}^{-1} = 1.85 \times 10^4 \times 10^7\text{ nm} = 1.85 \times 10^{11}\text{ nm}

    Correct

    λ=1νˉ=11.85×104 cm−1≈5.41×10−5 cm=541 nm\lambda = \frac{1}{\bar{\nu}} = \frac{1}{1.85 \times 10^4\text{ cm}^{-1}} \approx 5.41 \times 10^{-5}\text{ cm} = 541\text{ nm}

    Wave number νˉ\bar{\nu} is defined as the reciprocal of wavelength, νˉ=1λ\bar{\nu} = \frac{1}{\lambda}. Therefore, to find the wavelength, you must take the inverse: λ=1νˉ\lambda = \frac{1}{\bar{\nu}}, rather than equating them directly.

  2. Step 2

    Δy=λLd  ⟹  Δy=1.85×102 m×1.85 m2.50×10−4 m=1.37×106 m=1.37×109 mm\Delta y = \frac{\lambda L}{d} \implies \Delta y = \frac{1.85 \times 10^2\text{ m} \times 1.85\text{ m}}{2.50 \times 10^{-4}\text{ m}} = 1.37 \times 10^6\text{ m} = 1.37 \times 10^9\text{ mm}

    Correct

    Δy=λLd=(5.4054×10−7 m)(1.85 m)2.50×10−4 m=4.00×10−3 m=4.00 mm\Delta y = \frac{\lambda L}{d} = \frac{(5.4054 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}} = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}

    Your fringe spacing formula and unit conversions for LL and dd were applied correctly, but the result is incorrect due to carrying forward the incorrect wavelength from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct interference fringe-spacing equation Δy=λLd\Delta y = \frac{\lambda L}{d}.

You converted screen distance LL and slit separation dd into standard SI meters correctly.

You performed the algebraic calculation and downstream unit conversion from meters to millimeters accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal relation omission

You equated wavelength directly to wave number λ=νˉ\lambda = \bar{\nu} instead of applying the inverse relationship λ=1νˉ\lambda = \frac{1}{\bar{\nu}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing spectroscopic wave number (number of waves per unit length, units of length−1\text{length}^{-1}) with wavelength (length of one wave cycle, units of length\text{length}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Number Definition
  • Spectroscopic wave number represents spatial frequency: νˉ=1λ\bar{\nu} = \frac{1}{\lambda}.

  • Whenever given νˉ\bar{\nu}, invert it first to find λ=1νˉ\lambda = \frac{1}{\bar{\nu}} before using it in wave formulas.

Unit Dimensionality Check
  • Wavelength must have dimensions of length (e.g., cm\text{cm}, m\text{m}, or nm\text{nm}), whereas wave number has dimensions of inverse length (cm−1\text{cm}^{-1}).

  • Check the units: a quantity with cm−1\text{cm}^{-1} cannot be multiplied directly by 10710^7 to yield nm\text{nm} without inverting the unit first.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Invert the wave number to obtain the wavelength: λ=11.85×104 cm−1≈5.4054×10−5 cm\lambda = \frac{1}{1.85 \times 10^4\text{ cm}^{-1}} \approx 5.4054 \times 10^{-5}\text{ cm}.

  2. Convert centimeters to nanometers: 5.4054×10−5 cm×107 nm/cm≈541 nm5.4054 \times 10^{-5}\text{ cm} \times 10^7\text{ nm/cm} \approx 541\text{ nm}.

  3. Substitute λ=5.4054×10−7 m\lambda = 5.4054 \times 10^{-7}\text{ m}, L=1.85 mL = 1.85\text{ m}, and d=2.50×10−4 md = 2.50 \times 10^{-4}\text{ m} into Δy=λLd\Delta y = \frac{\lambda L}{d}.

Final answer

λ=541 nm\lambda = 541\text{ nm}; Δy=4.00 mm\Delta y = 4.00\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of spectroscopic wave number νˉ=1/λ\bar{\nu} = 1/\lambda and practice converting between cm−1\text{cm}^{-1} and nm\text{nm}.

  • Verify physical realism of intermediate answers: visible light wavelengths always fall roughly between 400 nm400\text{ nm} and 700 nm700\text{ nm}, so 1011 nm10^{11}\text{ nm} is an immediate indicator of an un-inverted wave number.

OverviewACEpath Teacher's Diagnosis

02 The student misinverts the fringe spacing formula as Δy = λd / L, multiplying by slit separation rather than dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=1νˉ=11.85×104 cm−1  ⟹  λ=5.41×10−5 cm=541 nm\lambda = \frac{1}{\bar{\nu}} = \frac{1}{1.85 \times 10^4\text{ cm}^{-1}} \implies \lambda = 5.41 \times 10^{-5}\text{ cm} = 541\text{ nm}

  2. Step 2

    Δy=λdL\Delta y = \frac{\lambda d}{L}

    Correct

    Δy=λLd\Delta y = \frac{\lambda L}{d}

    You inverted the positions of dd and LL. The fringe spacing on a screen increases with screen distance LL and decreases with slit separation dd, giving Δy=λLd\Delta y = \frac{\lambda L}{d}.

  3. Step 3

    Δy=5.41×10−7 m×2.50×10−4 m1.85 m  ⟹  Δy=7.31×10−11 m=7.31×10−8 mm\Delta y = \frac{5.41 \times 10^{-7}\text{ m} \times 2.50 \times 10^{-4}\text{ m}}{1.85\text{ m}} \implies \Delta y = 7.31 \times 10^{-11}\text{ m} = 7.31 \times 10^{-8}\text{ mm}

    Correct

    Δy=(5.41×10−7 m)(1.85 m)2.50×10−4 m=4.00×10−3 m=4.00 mm\Delta y = \frac{(5.41 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}} = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}

    Your numerical substitution and arithmetic followed your formula, but the result is incorrect due to the inverted formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the reciprocal relationship between wavelength and wave number.

You accurately converted units from centimeters to nanometers and meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misinversion

You swapped the slit separation dd and screen distance LL in the numerator and denominator of the fringe-spacing equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the angular condition dsin⁡θ=mλd \sin\theta = m\lambda with the linear position relation y=Ltan⁡θ≈Lθy = L \tan\theta \approx L\theta. Combining these gives θ≈λd\theta \approx \frac{\lambda}{d}, so Δy=Lθ=λLd\Delta y = L\theta = \frac{\lambda L}{d}, placing LL in the numerator and dd in the denominator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Trend Check
  • Bringing the slits closer together spreads fringes out; moving the screen farther away also spreads them out.

  • Verify that Δy∝L\Delta y \propto L and Δy∝1d\Delta y \propto \frac{1}{d} before calculating.

Dimensional Analysis
  • Fringe spacing has units of length: [length]=[length]⋅[length][length][\text{length}] = \frac{[\text{length}] \cdot [\text{length}]}{[\text{length}]}.

  • Ensure the product of two length dimensions in the numerator is divided by one length dimension in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct fringe-spacing formula: Δy=λLd\Delta y = \frac{\lambda L}{d}.

  2. Substitute the standard SI values: Δy=(5.4054×10−7 m)(1.85 m)2.50×10−4 m\Delta y = \frac{(5.4054 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}}.

  3. Evaluate the quotient: Δy=4.00×10−3 m=4.00 mm\Delta y = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}.

Final answer

λ=541 nm\lambda = 541\text{ nm}; Δy=4.00 mm\Delta y = 4.00\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric derivation of double-slit interference: y=Lθy = L\theta and θ≈λd\theta \approx \frac{\lambda}{d}.

  • Use physical intuition: imagine d→0d \to 0, which causes diffraction and interference patterns to expand dramatically, confirming that dd must be in the denominator.

OverviewACEpath Teacher's Diagnosis

03 The student erroneously divides the fringe spacing by 2, mistaking the separation between adjacent dark fringes for half of the fringe width.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λ=1νˉ=11.85×104 cm−1=5.405×10−5 cm  ⟹  λ=540.5 nm\lambda = \frac{1}{\bar{\nu}} = \frac{1}{1.85 \times 10^4\text{ cm}^{-1}} = 5.405 \times 10^{-5}\text{ cm} \implies \lambda = 540.5\text{ nm}

  2. Step 2

    Δy=λL2d  ⟹  Δy=5.405×10−7 m×1.85 m2×2.50×10−4 m\Delta y = \frac{\lambda L}{2d} \implies \Delta y = \frac{5.405 \times 10^{-7}\text{ m} \times 1.85\text{ m}}{2 \times 2.50 \times 10^{-4}\text{ m}}

    Correct

    Δy=λLd=(5.405×10−7 m)(1.85 m)2.50×10−4 m\Delta y = \frac{\lambda L}{d} = \frac{(5.405 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}}

    You introduced an unnecessary factor of 22 in the denominator. In Young's double-slit interference, the spacing between any two adjacent dark fringes (or bright fringes) is Δy=λLd\Delta y = \frac{\lambda L}{d}, not λL2d\frac{\lambda L}{2d}.

  3. Step 3

    Δy=2.00×10−3 m=2.00 mm\Delta y = 2.00 \times 10^{-3}\text{ m} = 2.00\text{ mm}

    Correct

    Δy=4.00×10−3 m=4.00 mm\Delta y = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}

    Your arithmetic was carried out accurately based on your expression in Step 2, but the final value is halved because of the formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of wave number νˉ=1λ\bar{\nu} = \frac{1}{\lambda} to find the wavelength.

You converted all physical quantities into meters with the correct powers of ten before calculating.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Selection Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the distance between adjacent dark fringes with the distance between an adjacent bright fringe and dark fringe. The distance between consecutive fringes of the same type (dark-to-dark or bright-to-bright) is λLd\frac{\lambda L}{d}, whereas λL2d\frac{\lambda L}{2d} is the distance from a bright fringe center to the nearest dark fringe center.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fringe Spacing Identity
  • Adjacent bright-to-bright separation = adjacent dark-to-dark separation = λLd\frac{\lambda L}{d}. Adjacent bright-to-dark separation = λL2d\frac{\lambda L}{2d}.

  • Always verify whether the problem asks for the distance between two like fringes (bright-to-bright or dark-to-dark) or between two opposite fringes (bright-to-dark).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the standard fringe separation formula for adjacent dark fringes: Δy=λLd\Delta y = \frac{\lambda L}{d}.

  2. Substitute the converted values: Δy=(5.4054×10−7 m)(1.85 m)2.50×10−4 m=4.00×10−3 m\Delta y = \frac{(5.4054 \times 10^{-7}\text{ m})(1.85\text{ m})}{2.50 \times 10^{-4}\text{ m}} = 4.00 \times 10^{-3}\text{ m}.

Final answer

λ=541 nm\lambda = 541\text{ nm}; Δy=4.00 mm\Delta y = 4.00\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fringe position conditions for minima (ym=(m+12)λLdy_m = (m + \frac{1}{2})\frac{\lambda L}{d}) and subtract ym+1−ymy_{m+1} - y_m to prove that Δy=λLd\Delta y = \frac{\lambda L}{d}.

  • Solve the practice problems below to practice distinguishing like-fringe spacing from adjacent bright-dark spacing.

Lock it in

Similar question

01

A helium-neon laser produces light with a wave number of νˉ=1.58×104 cm−1\bar{\nu} = 1.58 \times 10^4\text{ cm}^{-1}. Find its wavelength λ\lambda in nanometers.

Answer

λ=633 nm\lambda = 633\text{ nm}. Key steps: λ=1νˉ=11.58×104 cm−1≈6.329×10−5 cm\lambda = \frac{1}{\bar{\nu}} = \frac{1}{1.58 \times 10^4\text{ cm}^{-1}} \approx 6.329 \times 10^{-5}\text{ cm}; multiply by 107 nm/cm10^7\text{ nm/cm} to get λ≈633 nm\lambda \approx 633\text{ nm}.

02

Light with a wave number of νˉ=2.00×104 cm−1\bar{\nu} = 2.00 \times 10^4\text{ cm}^{-1} illuminates a double slit with separation d=0.20 mmd = 0.20\text{ mm}. If interference fringes are observed on a screen 1.20 m1.20\text{ m} away, determine the fringe spacing Δy\Delta y in millimeters.

Answer

Δy=3.00 mm\Delta y = 3.00\text{ mm}. Key steps: λ=12.00×104 cm−1=5.00×10−5 cm=5.00×10−7 m\lambda = \frac{1}{2.00 \times 10^4\text{ cm}^{-1}} = 5.00 \times 10^{-5}\text{ cm} = 5.00 \times 10^{-7}\text{ m}; then Δy=λLd=(5.00×10−7 m)(1.20 m)2.00×10−4 m=3.00×10−3 m=3.00 mm\Delta y = \frac{\lambda L}{d} = \frac{(5.00 \times 10^{-7}\text{ m})(1.20\text{ m})}{2.00 \times 10^{-4}\text{ m}} = 3.00 \times 10^{-3}\text{ m} = 3.00\text{ mm}.

03

In a Young's double-slit setup, the distance between adjacent bright fringes is measured to be Δy=2.50 mm\Delta y = 2.50\text{ mm} when L=1.50 mL = 1.50\text{ m} and d=0.300 mmd = 0.300\text{ mm}. What is the wave number νˉ\bar{\nu} of the incident light in cm−1\text{cm}^{-1}?

Answer

νˉ=2.00×104 cm−1\bar{\nu} = 2.00 \times 10^4\text{ cm}^{-1}. Key steps: λ=dΔyL=(3.00×10−4 m)(2.50×10−3 m)1.50 m=5.00×10−7 m=5.00×10−5 cm\lambda = \frac{d \Delta y}{L} = \frac{(3.00 \times 10^{-4}\text{ m})(2.50 \times 10^{-3}\text{ m})}{1.50\text{ m}} = 5.00 \times 10^{-7}\text{ m} = 5.00 \times 10^{-5}\text{ cm}; then νˉ=1λ=15.00×10−5 cm=2.00×104 cm−1\bar{\nu} = \frac{1}{\lambda} = \frac{1}{5.00 \times 10^{-5}\text{ cm}} = 2.00 \times 10^4\text{ cm}^{-1}.

Loading workspace…