Resources

A laboratory bumper mechanism utilizing a linear spring with spring constant k=650 N/mk = 650\text{ N/m} brings a moving cart to an instantaneous rest, storing Us=8.45 JU_s = 8.45\text{ J} of elastic potential energy at maximum deflection. Determine the distance xx (in centimeters) that the spring was compressed from its unconstrained equilibrium position.

Answer and steps

Final answer

x=16.1 cmx = 16.1\text{ cm}

Steps

Method: Using the Elastic Potential Energy Formula

  1. Recall the governing formula: The elastic potential energy UsU_s stored in a linear (Hookean) spring compressed or stretched by a displacement xx from its equilibrium position is given by: Us=12kx2U_s = \frac{1}{2} k x^2 where:

    • UsU_s is the elastic potential energy in joules (J\text{J}),
    • kk is the spring constant in newtons per meter (N/m\text{N/m}),
    • xx is the displacement (compression or stretch) in meters (m\text{m}).
  2. Rearrange to solve for displacement xx: Multiply both sides by 22 and divide by kk: x2=2Uskx^2 = \frac{2 U_s}{k} Taking the principal square root on both sides: x=2Uskx = \sqrt{\frac{2 U_s}{k}}
  3. Substitute the given values: Given Us=8.45 JU_s = 8.45\text{ J} and k=650 N/mk = 650\text{ N/m}: x2=2⋅8.45 J650 N/m=16.9650 m2=0.026 m2x^2 = \frac{2 \cdot 8.45\text{ J}}{650\text{ N/m}} = \frac{16.9}{650}\text{ m}^2 = 0.026\text{ m}^2 x=0.026 m≈0.16125 mx = \sqrt{0.026}\text{ m} \approx 0.16125\text{ m}
  4. Convert to centimeters: Multiply by 100 cm/m100\text{ cm/m}: x≈0.16125⋅100 cm≈16.1 cmx \approx 0.16125 \cdot 100\text{ cm} \approx 16.1\text{ cm}

Common Pitfall: A frequent mistake is forgetting to take the square root after evaluating 2Usk\frac{2 U_s}{k}, or neglecting to convert the displacement from standard SI units (meters) to the requested units (centimeters).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student might omit the factor of 1/2 in the potential energy formula, writing U_s = kx² instead of U_s = (1/2)kx².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Us=kx2U_s = kx^2

    Correct

    Us=12kx2U_s = \frac{1}{2}kx^2

    The elastic potential energy stored in a linear spring depends on the average force during displacement, which introduces a factor of 12\frac{1}{2}.

  2. Step 2

    x2=Usk=8.45650=0.013x^2 = \frac{U_s}{k} = \frac{8.45}{650} = 0.013

    Correct

    x2=2Usk=2(8.45)650=0.026x^2 = \frac{2U_s}{k} = \frac{2(8.45)}{650} = 0.026

    Your rearrangement and arithmetic were carried out correctly based on your equation, but the missing factor of 22 from Step 1 carried forward into this calculation.

  3. Step 3

    x=0.013≈0.114 mx = \sqrt{0.013} \approx 0.114\text{ m}

    Correct

    x=0.026≈0.16125 mx = \sqrt{0.026} \approx 0.16125\text{ m}

    You correctly took the square root of your calculated x2x^2 value.

  4. Step 4

    x=11.4 cmx = 11.4\text{ cm}

    Correct

    x≈16.1 cmx \approx 16.1\text{ cm}

    You correctly multiplied by 100100 to convert meters to centimeters, though the numerical value reflects the earlier formula error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the squared displacement and evaluated the numerical division.

You remembered to take the square root to solve for displacement xx.

You accurately converted the resulting distance from meters to centimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 1/2 in spring potential energy formula

You wrote Us=kx2U_s = kx^2 instead of Us=12kx2U_s = \frac{1}{2}kx^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating Hooke's law force (F=kxF = kx) with stored elastic potential energy (Us=∫kx dx=12kx2U_s = \int kx\,dx = \frac{1}{2}kx^2), leading to an omitted factor of 12\frac{1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Average Force Principle
  • Because spring restoring force increases linearly from 00 to kxkx, the average force exerted is Fˉ=12kx\bar{F} = \frac{1}{2}kx.

  • Always verify that the work or potential energy formula incorporates this average factor: W=Fˉx=12kx2W = \bar{F}x = \frac{1}{2}kx^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the complete elastic potential energy equation: Us=12kx2U_s = \frac{1}{2}kx^2

  2. Multiply both sides by 22 and divide by kk: x2=2Uskx^2 = \frac{2U_s}{k}

  3. Substitute the values: x2=2(8.45 J)650 N/m=16.9650=0.026 m2x^2 = \frac{2(8.45\text{ J})}{650\text{ N/m}} = \frac{16.9}{650} = 0.026\text{ m}^2

  4. Take the square root: x=0.026 m≈0.16125 mx = \sqrt{0.026}\text{ m} \approx 0.16125\text{ m}

  5. Convert to centimeters: x≈0.16125×100 cm=16.1 cmx \approx 0.16125 \times 100\text{ cm} = 16.1\text{ cm}

Final answer

x=16.1 cmx = 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of work done on a spring using the triangular area under an FF vs. xx graph to cement why the 12\frac{1}{2} must always appear.

  • Practice re-checking formulas dimensionally and against standard energy definitions before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

02 A student might forget to take the square root when solving for x from x² = 2U_s / k.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Us=12kx2  ⟹  x2=2Usk=2(8.45)650=16.9650=0.026U_s = \frac{1}{2} k x^2 \implies x^2 = \frac{2 U_s}{k} = \frac{2(8.45)}{650} = \frac{16.9}{650} = 0.026

  2. Step 2

    x=0.026 mx = 0.026\text{ m}

    Correct

    x=0.026 m2≈0.16125 mx = \sqrt{0.026\text{ m}^2} \approx 0.16125\text{ m}

    You set xx directly equal to 0.0260.026 instead of taking the square root of x2x^2.

  3. Step 3

    x=2.6 cmx = 2.6\text{ cm}

    Correct

    x≈0.16125 m×100 cm/m≈16.1 cmx \approx 0.16125\text{ m} \times 100\text{ cm/m} \approx 16.1\text{ cm}

    Your unit conversion factor from meters to centimeters was correct, but the value was affected by omitting the square root in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated the elastic potential energy equation Us=12kx2U_s = \frac{1}{2} k x^2.

You accurately isolated x2x^2 as 2Usk\frac{2 U_s}{k} and calculated the quotient 0.0260.026.

You applied the correct conversion factor of 100 cm/m100\text{ cm/m} to change meters into centimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root

You dropped the square on x2x^2 without applying the square root to the numerical side of the equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When solving equations containing a squared variable such as x2=Cx^2 = C, it is easy to accidentally transcribe x2x^2 as xx once the right-hand side is fully evaluated.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse operation check
  • To solve for xx from x2=Cx^2 = C (where x>0x > 0), you must take the principal square root: x=Cx = \sqrt{C}.

  • Whenever your formula contains x2x^2, write the radical explicitly as x=…x = \sqrt{\dots} before substituting numbers or writing the final value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the principal square root of both sides: x=0.026 m2≈0.16125 mx = \sqrt{0.026\text{ m}^2} \approx 0.16125\text{ m}.

  2. Convert the displacement from meters to centimeters: x≈0.16125×100 cm≈16.1 cmx \approx 0.16125 \times 100\text{ cm} \approx 16.1\text{ cm}.

Final answer

x≈16.1 cmx \approx 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the explicit square-root step x=2Uskx = \sqrt{\frac{2 U_s}{k}} before computing numerical values.

  • Perform a quick units check: energy divided by spring constant has units of J/(N/m)=m2\text{J}/(\text{N/m}) = \text{m}^2, which signals that a square root is required to obtain meters.

OverviewACEpath Teacher's Diagnosis

03 A student might correctly calculate the compression distance in meters but fail to convert it to centimeters as requested.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Us=12Kx2  ⟹  x=2UsKU_s = \frac{1}{2} K x^2 \implies x = \sqrt{\frac{2 U_s}{K}}

  2. Step 2

    x=2(8.45)650=0.026≈0.161 mx = \sqrt{\frac{2(8.45)}{650}} = \sqrt{0.026} \approx 0.161\text{ m}

  3. Step 3

    x=0.161x = 0.161

    Correct

    x=0.16125 m×100 cm/m≈16.1 cmx = 0.16125\text{ m} \times 100\text{ cm/m} \approx 16.1\text{ cm}

    The problem specifically asked for the compression distance in centimeters, so you needed to multiply your result in meters by 100100 to get 16.1 cm16.1\text{ cm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct elastic potential energy relationship Us=12kx2U_s = \frac{1}{2}kx^2.

You rearranged the formula accurately to express xx in terms of UsU_s and kk.

You performed the numerical substitution and evaluated the square root correctly to find x≈0.161 mx \approx 0.161\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted

You left your final numerical answer as 0.1610.161 instead of converting from meters to centimeters.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the unit specification stated in the prompt after completing the core algebraic and arithmetic calculations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Prompt Unit Check
  • Standard formula calculations yield values in SI base units (meters for displacement), but problems frequently specify target units such as centimeters or millimeters.

  • Always circle or highlight the requested unit in the prompt and perform an explicit unit conversion step before boxing your final answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. x≈0.16125 mx \approx 0.16125\text{ m}

  2. Convert from meters to centimeters: x=0.16125 m×100 cm1 m=16.125 cmx = 0.16125\text{ m} \times \frac{100\text{ cm}}{1\text{ m}} = 16.125\text{ cm}

  3. Round to three significant figures to match the given data: x≈16.1 cmx \approx 16.1\text{ cm}

Final answer

x=16.1 cmx = 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing your final answer line, reread the prompt to verify whether a specific unit like cm\text{cm} or mm\text{mm} was requested.

  • Write units explicitly alongside every intermediate and final numerical value to avoid treating dimensionless numbers as finished answers.

Lock it in

Similar question

01

A toy dart launcher compresses an internal spring (k=450 N/mk = 450\text{ N/m}) by 8.0 cm8.0\text{ cm}. Calculate the elastic potential energy UsU_s stored in the compressed spring in joules.

Answer

Convert compression to meters: x=0.080 mx = 0.080\text{ m}. Apply Us=12kx2=12(450)(0.080)2=225×0.0064=1.44 JU_s = \frac{1}{2}kx^2 = \frac{1}{2}(450)(0.080)^2 = 225 \times 0.0064 = 1.44\text{ J}.

02

A horizontal spring with spring constant k=800 N/mk = 800\text{ N/m} is compressed until it stores 36.0 J36.0\text{ J} of potential energy. Find the compression distance xx in centimeters.

Answer

Rearrange Us=12kx2U_s = \frac{1}{2}kx^2 to get x=2Usk=2(36.0)800=72.0800=0.09=0.30 mx = \sqrt{\frac{2U_s}{k}} = \sqrt{\frac{2(36.0)}{800}} = \sqrt{\frac{72.0}{800}} = \sqrt{0.09} = 0.30\text{ m}. Convert to centimeters: x=30 cmx = 30\text{ cm}.

03

A 0.50 kg0.50\text{ kg} block sliding on a frictionless surface at v=4.0 m/sv = 4.0\text{ m/s} hits a stationary bumper spring with k=1250 N/mk = 1250\text{ N/m}. Assuming all kinetic energy converts into elastic potential energy at maximum compression, find the maximum compression xx in centimeters.

Answer

Equate initial kinetic energy to final spring potential energy: 12mv2=12kx2\frac{1}{2}mv^2 = \frac{1}{2}kx^2. The 12\frac{1}{2} factors cancel: kx2=mv2  ⟹  x=vmk=4.00.501250=4.00.0004=4.0(0.02)=0.080 mkx^2 = mv^2 \implies x = v\sqrt{\frac{m}{k}} = 4.0\sqrt{\frac{0.50}{1250}} = 4.0\sqrt{0.0004} = 4.0(0.02) = 0.080\text{ m}. Convert to centimeters: x=8.0 cmx = 8.0\text{ cm}.

Loading workspace…