Resources

A block of mass m=0.500 kgm = 0.500\text{ kg} is pressed against a vertical wooden wall. A magnetic field exerts a constant horizontal non-contact magnetic attraction FM=14.0 NF_M = 14.0\text{ N} pulling the block directly toward the wall (perpendicular to the surface). The static friction coefficient between the block and the wall is μs=0.350\mu_s = 0.350, and g=9.80 m/s2g = 9.80\text{ m/s}^2. An external vertical contact force PP is applied to the block directed vertically upward. (a) Classify the normal force NN, the static friction force fsf_s, and the magnetic force FMF_M as contact or non-contact forces. (b) Determine the minimum vertical contact force Pmin⁡P_{\min} required to prevent the block from slipping downward.

Answer and steps

Final answer

(a) Normal force: contact force; Static friction force: contact force; Magnetic force: non-contact force; (b) Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}

Steps

01

Analyze horizontal equilibrium

Part (a): Classifying the Forces

Forces are classified based on whether physical interaction between surfaces is required:

  1. Normal force (NN): Arises from the direct physical contact and atomic compression between the surface of the block and the wall. Therefore, it is a contact force.
  2. Static friction force (fsf_s): Arises from the microscopic interlocking and intermolecular interactions along the surfaces in direct physical contact, resisting relative motion. Therefore, it is a contact force.
  3. Magnetic force (FMF_M): Acts at a distance mediated by a magnetic field, requiring no physical contact between the interacting bodies. Therefore, it is a non-contact force.

Part (b): Determining the Minimum Force Pmin⁡P_{\min}

The block is in equilibrium horizontally against the vertical wall: ∑Fx=0  ⟹  N−FM=0  ⟹  N=FM\sum F_x = 0 \implies N - F_M = 0 \implies N = F_M

Given FM=14.0 NF_M = 14.0\text{ N}: N=14.0 NN = 14.0\text{ N}

02

Determine the maximum static friction force

The maximum static friction force the wall can exert is: fs,max⁡=μsNf_{s,\max} = \mu_s N fs,max⁡=0.350⋅14.0 N=4.90 Nf_{s,\max} = 0.350 \cdot 14.0\text{ N} = 4.90\text{ N}

03

Analyze vertical equilibrium to prevent downward slipping

The downward force acting on the block is gravity: W=mg=(0.500 kg)(9.80 m/s2)=4.90 NW = mg = (0.500\text{ kg})(9.80\text{ m/s}^2) = 4.90\text{ N}

To prevent the block from slipping downward, the combination of the applied upward force PP and static friction directed upward must balance the downward gravitational force: P+fs=WP + f_s = W P=W−fsP = W - f_s

To minimize PP, static friction acts at its maximum upward capacity (fs=fs,max⁡f_s = f_{s,\max}): Pmin⁡=W−fs,max⁡=4.90 N−4.90 N=0.00 NP_{\min} = W - f_{s,\max} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}

Since the maximum available static friction (4.90 N4.90\text{ N}) is completely sufficient to support the block's weight on its own, no external upward contact force is needed: Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies friction as acting downward instead of upward when preventing downward slip, adding friction to the weight instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NN: contact force   ⟹  fs\implies f_s: contact force   ⟹  FM\implies F_M: non-contact force

  2. Step 2

    N=FM=14.0 N  ⟹  fs,max⁡=0.350×14.0=4.90 NN = F_M = 14.0\text{ N} \implies f_{s,\max} = 0.350 \times 14.0 = 4.90\text{ N}

  3. Step 3

    W=mg=0.500×9.80=4.90 NW = mg = 0.500 \times 9.80 = 4.90\text{ N}

  4. Step 4

    Pmin⁡=W+fs,max⁡=4.90+4.90=9.80 NP_{\min} = W + f_{s,\max} = 4.90 + 4.90 = 9.80\text{ N}

    Correct

    P+fs,max⁡=W  ⟹  Pmin⁡=W−fs,max⁡=4.90 N−4.90 N=0.00 NP + f_{s,\max} = W \implies P_{\min} = W - f_{s,\max} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}

    When the block is on the verge of slipping downward, static friction points upward along the wall to oppose the impending downward motion. In vertical equilibrium, both PP and fsf_s act upward while weight WW acts downward, giving P+fs=WP + f_s = W. Setting fs=fs,max⁡f_s = f_{s,\max} gives Pmin⁡=W−fs,max⁡=0.00 NP_{\min} = W - f_{s,\max} = 0.00\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the normal force, static friction, and magnetic force.

You correctly determined the normal force from horizontal equilibrium.

You correctly computed the maximum static friction force and the gravitational force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Frictional force direction error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed friction acts downward or opposes the upward applied force, rather than identifying that static friction opposes the direction of impending relative motion (which is downward due to gravity).

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Static Friction
  • Static friction always opposes the impending relative motion between contacting surfaces.

  • Identify which way the object would slide if there were no friction; point static friction in the exact opposite direction.

Vertical Equilibrium Condition
  • For static equilibrium vertically, ∑Fy=0\sum F_y = 0, meaning upward forces must balance downward forces: P+fs=WP + f_s = W.

  • Set up the sum of forces with upward forces positive and downward forces negative before solving for PP.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the direction of impending motion: without sufficient upward force, gravity tends to pull the block downward, so static friction fsf_s points upward.

  2. Write the vertical equilibrium condition: ∑Fy=P+fs−W=0  ⟹  P=W−fs\sum F_y = P + f_s - W = 0 \implies P = W - f_s.

  3. Substitute the maximum upward static friction fs,max⁡=4.90 Nf_{s,\max} = 4.90\text{ N} to minimize PP: Pmin⁡=4.90 N−4.90 N=0.00 NP_{\min} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}.

Final answer

(a) Normal force: contact force; Static friction force: contact force; Magnetic force: non-contact force; (b) Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick free-body diagram showing arrow directions for every vertical force before writing algebraic equations.

  • Practice determining impending motion by asking: 'If friction vanished right now, which way would the block slide?'

OverviewACEpath Teacher's Diagnosis

02 The student assumes the normal force equals the weight of the block mg rather than the perpendicular horizontal applied force FM.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NN: contact force ⟹ fsf_s: contact force ⟹ FMF_M: non-contact force

  2. Step 2

    N=mg=0.500×9.80=4.90 NN = mg = 0.500 \times 9.80 = 4.90\text{ N}

    Correct

    ∑Fx=0  ⟹  N=FM=14.0 N\sum F_x = 0 \implies N = F_M = 14.0\text{ N}

    The wall is vertical, so the normal force acts horizontally perpendicular to the wall. Balancing horizontal forces gives N=FM=14.0 NN = F_M = 14.0\text{ N}, rather than N=mgN = mg.

  3. Step 3

    fs,max⁡=μsN=0.350×4.90=1.715 Nf_{s,\max} = \mu_s N = 0.350 \times 4.90 = 1.715\text{ N}

    Correct

    fs,max⁡=μsN=0.350×14.0 N=4.90 Nf_{s,\max} = \mu_s N = 0.350 \times 14.0\text{ N} = 4.90\text{ N}

    You correctly applied the static friction formula fs,max⁡=μsNf_{s,\max} = \mu_s N, but this step inherits the incorrect value of NN.

  4. Step 4

    W=mg=4.90 N  ⟹  Pmin⁡=W−fs,max⁡=4.90−1.715=3.185 NW = mg = 4.90\text{ N} \implies P_{\min} = W - f_{s,\max} = 4.90 - 1.715 = 3.185\text{ N}

    Correct

    W=mg=4.90 N  ⟹  Pmin⁡=W−fs,max⁡=4.90 N−4.90 N=0.00 NW = mg = 4.90\text{ N} \implies P_{\min} = W - f_{s,\max} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}

    Your vertical equilibrium relation Pmin⁡=W−fs,max⁡P_{\min} = W - f_{s,\max} is correct, but evaluating it with the correct maximum friction gives Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified all contact and non-contact forces in part (a).

You correctly identified that the minimum upward force occurs when upward static friction operates at its maximum value.

You set up the vertical equilibrium equation P+fs=WP + f_s = W correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Normal force set to weight on a vertical surface

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the normal force always equals the gravitational weight mgmg, overlooking that the normal force is perpendicular to the contact surface and must balance all perpendicular forces (here, the horizontal magnetic force FMF_M).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Surface Orientation
  • The normal force N⃗\vec{N} is always directed perpendicular to the contact surface, not necessarily opposite gravity.

  • Check whether the supporting surface is horizontal, vertical, or inclined before writing an expression for NN.

Perpendicular Force Balance
  • Solve ∑F⊥=0\sum F_{\perp} = 0 along the surface normal axis to determine NN.

  • Set NN equal to the net external force pushing the object into the surface along that normal axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve horizontal equilibrium perpendicular to the vertical wall: ∑Fx=0  ⟹  N=FM=14.0 N\sum F_x = 0 \implies N = F_M = 14.0\text{ N}.

  2. Compute the maximum static friction: fs,max⁡=μsN=0.350×14.0 N=4.90 Nf_{s,\max} = \mu_s N = 0.350 \times 14.0\text{ N} = 4.90\text{ N}.

  3. Compare maximum friction to weight: W=mg=(0.500 kg)(9.80 m/s2)=4.90 NW = mg = (0.500\text{ kg})(9.80\text{ m/s}^2) = 4.90\text{ N}.

  4. Solve vertical equilibrium for minimum upward force: Pmin⁡=W−fs,max⁡=4.90 N−4.90 N=0.00 NP_{\min} = W - f_{s,\max} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}.

Final answer

(a) NN: contact force; fsf_s: contact force; FMF_M: non-contact force; (b) Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a free-body diagram and resolve forces into perpendicular and parallel components relative to the contact surface before solving for NN.

  • Practice finding the normal force on vertical walls and inclines where N≠mgN \neq mg.

OverviewACEpath Teacher's Diagnosis

03 The student completely ignores the static friction provided by the wall, assuming the external force P alone must balance the entire weight of the block.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NN: contact force   ⟹  fs\implies f_s: contact force   ⟹  FM\implies F_M: non-contact force

  2. Step 2

    W=mg=0.500×9.80=4.90 NW = mg = 0.500 \times 9.80 = 4.90\text{ N}

  3. Step 3

    Pmin⁡=W=4.90 NP_{\min} = W = 4.90\text{ N}

    Correct

    N=FM=14.0 N  ⟹  fs,max⁡=μsN=0.350×14.0 N=4.90 N  ⟹  Pmin⁡=W−fs,max⁡=0.00 NN = F_M = 14.0\text{ N} \implies f_{s,\max} = \mu_s N = 0.350 \times 14.0\text{ N} = 4.90\text{ N} \implies P_{\min} = W - f_{s,\max} = 0.00\text{ N}

    You assumed the upward external force PP must support the entire weight alone, omitting the static friction force fsf_s exerted upward by the wall to prevent downward slipping.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between contact and non-contact forces based on whether physical surface interaction is required.

You accurately calculated the downward gravitational force acting on the block.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of static friction in vertical equilibrium

You balanced the weight of the block using only the external force PP, neglecting the static friction along the wall.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When a body is pressed against a rough surface, the surface exerts static friction parallel to the interface that opposes impending motion. Because magnetic attraction presses the block against the wall (N=FM=14.0 NN = F_M = 14.0\text{ N}), the wall provides up to fs,max⁡=μsN=4.90 Nf_{s,\max} = \mu_s N = 4.90\text{ N} of upward support, reducing the necessary applied force PP.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify all contact forces parallel to surfaces
  • Any contact surface with roughness and a non-zero normal force can exert friction parallel to the contact interface.

  • Draw a complete free-body diagram showing both the normal force perpendicular to the wall and static friction parallel to the wall before writing equilibrium equations.

Minimize applied force by maximizing friction
  • To find the minimum upward force Pmin⁡P_{\min} to prevent downward slip, static friction acts upward at its maximum value: fs=fs,max⁡=μsNf_s = f_{s,\max} = \mu_s N.

  • Write the vertical equilibrium condition as P+fs,max⁡=mgP + f_{s,\max} = mg, then solve for P=mg−μsNP = mg - \mu_s N.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Analyze horizontal equilibrium: ∑Fx=0  ⟹  N=FM=14.0 N\sum F_x = 0 \implies N = F_M = 14.0\text{ N}.

  2. Determine the maximum available static friction: fs,max⁡=μsN=0.350×14.0 N=4.90 Nf_{s,\max} = \mu_s N = 0.350 \times 14.0\text{ N} = 4.90\text{ N}.

  3. Write the vertical force balance to prevent downward slipping: P+fs,max⁡=WP + f_{s,\max} = W.

  4. Solve for the minimum applied force: Pmin⁡=W−fs,max⁡=4.90 N−4.90 N=0.00 NP_{\min} = W - f_{s,\max} = 4.90\text{ N} - 4.90\text{ N} = 0.00\text{ N}.

Final answer

(a) Normal force: contact force; Static friction force: contact force; Magnetic force: non-contact force; (b) Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include friction on your free-body diagram whenever two touching surfaces have a non-zero normal force and relative motion is impending.

  • Remember that static friction can partially or fully balance an object's weight when pressed against a vertical surface.

Lock it in

Similar question

01

A block of mass m=1.20 kgm = 1.20\text{ kg} is held against a vertical wall by a horizontal pressing force of 30.0 N30.0\text{ N}. The coefficient of static friction is μs=0.250\mu_s = 0.250, and g=9.80 m/s2g = 9.80\text{ m/s}^2. What minimum vertical upward force Pmin⁡P_{\min} must be applied to prevent the block from slipping downward?

Answer

Pmin⁡=4.26 NP_{\min} = 4.26\text{ N}. Downward weight is W=mg=(1.20)(9.80)=11.76 NW = mg = (1.20)(9.80) = 11.76\text{ N}. Normal force is N=30.0 NN = 30.0\text{ N}, so maximum upward static friction is fs,max⁡=μsN=(0.250)(30.0)=7.50 Nf_{s,\max} = \mu_s N = (0.250)(30.0) = 7.50\text{ N}. Vertical equilibrium to prevent downward slip requires Pmin⁡+fs,max⁡=W  ⟹  Pmin⁡=11.76 N−7.50 N=4.26 NP_{\min} + f_{s,\max} = W \implies P_{\min} = 11.76\text{ N} - 7.50\text{ N} = 4.26\text{ N}.

02

A 2.00 kg2.00\text{ kg} box is pressed against a vertical wall with a normal force N=50.0 NN = 50.0\text{ N}, where μs=0.300\mu_s = 0.300 and g=9.80 m/s2g = 9.80\text{ m/s}^2. An upward force P=10.0 NP = 10.0\text{ N} is applied. Does the box slide downward, stay in equilibrium, or slide upward? Determine the actual magnitude and direction of the static friction force.

Answer

The box stays in equilibrium with fs=9.60 Nf_s = 9.60\text{ N} upward. Weight is W=mg=19.6 NW = mg = 19.6\text{ N} downward. The applied force is P=10.0 NP = 10.0\text{ N} upward, leaving an unbalanced downward tendency of W−P=9.60 NW - P = 9.60\text{ N}. The maximum available static friction is fs,max⁡=μsN=(0.300)(50.0)=15.0 Nf_{s,\max} = \mu_s N = (0.300)(50.0) = 15.0\text{ N}. Since 9.60 N≤15.0 N9.60\text{ N} \le 15.0\text{ N}, static friction adjusts to exactly 9.60 N9.60\text{ N} upward, maintaining static equilibrium.

03

A block of mass m=0.800 kgm = 0.800\text{ kg} is on a vertical wall with μs=0.400\mu_s = 0.400 and g=9.80 m/s2g = 9.80\text{ m/s}^2. A horizontal magnetic force FM=25.0 NF_M = 25.0\text{ N} pulls the block toward the wall. Find the range of vertical force PP (directed upward) for which the block remains in static equilibrium without slipping either downward or upward.

Answer

0.00 N≤P≤17.84 N0.00\text{ N} \le P \le 17.84\text{ N}. Weight is W=mg=(0.800)(9.80)=7.84 NW = mg = (0.800)(9.80) = 7.84\text{ N} downward. Maximum static friction is fs,max⁡=μsN=(0.400)(25.0)=10.0 Nf_{s,\max} = \mu_s N = (0.400)(25.0) = 10.0\text{ N}. To prevent downward slip, friction acts upward: P+fs=W  ⟹  Pmin⁡=W−fs,max⁡=7.84−10.0=−2.16 NP + f_s = W \implies P_{\min} = W - f_{s,\max} = 7.84 - 10.0 = -2.16\text{ N}. Since PP must be directed upward (P≥0P \ge 0), Pmin⁡=0.00 NP_{\min} = 0.00\text{ N}. To prevent upward slip, friction acts downward: P−fs=W  ⟹  Pmax⁡=W+fs,max⁡=7.84+10.0=17.84 NP - f_s = W \implies P_{\max} = W + f_{s,\max} = 7.84 + 10.0 = 17.84\text{ N}. Therefore, the block remains stationary for 0.00 N≤P≤17.84 N0.00\text{ N} \le P \le 17.84\text{ N}.

Loading workspace…