Resources

A student pushes an 8.00 kg8.00\text{ kg} carton up a frictionless incline of vertical height H=2.50 mH = 2.50\text{ m} along two different configurations: Path 1 is a steep ramp of incline angle θ1=60.0∘\theta_1 = 60.0^\circ, and Path 2 is a gentle ramp of incline angle θ2=30.0∘\theta_2 = 30.0^\circ. In both configurations, the student pushes parallel to the incline surface at a constant velocity from bottom to top. Intuitively, students often believe that more work is done against gravity on the longer ramp. Calculate: (a) the applied force required along Path 1 and along Path 2, (b) the total work done by the student's applied force along Path 1 and along Path 2, and (c) the gravitational potential energy change ΔUg\Delta U_g of the carton in both paths, resolving why the work required is identical despite the longer distance on Path 2. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) F1=67.9 NF_1 = 67.9\text{ N}, F2=39.2 NF_2 = 39.2\text{ N}; (b) W1=196 JW_1 = 196\text{ J}, W2=196 JW_2 = 196\text{ J}; (c) ΔUg,1=ΔUg,2=196 J\Delta U_{g,1} = \Delta U_{g,2} = 196\text{ J} (the ramp angle decreases the required force by the exact factor sin⁡θ\sin\theta by which it increases the path length d=H/sin⁡θd = H/\sin\theta, leaving work W=Fd=mgHW = Fd = mgH invariant)

Steps

Part (a): Applied Force Required Along Each Path

Since the carton moves up each incline at a constant velocity, the acceleration along the ramp is zero (a=0a = 0). By Newton's second law, the forces parallel to the surface must balance:

Fapplied−mgsin⁡θ=0  ⟹  F=mgsin⁡θF_{\text{applied}} - mg\sin\theta = 0 \implies F = mg\sin\theta

Calculate the carton's weight: mg=(8.00 kg)(9.80 m/s2)=78.4 Nmg = (8.00\text{ kg})(9.80\text{ m/s}^2) = 78.4\text{ N}

  • Path 1 (θ1=60.0∘\theta_1 = 60.0^\circ): F1=mgsin⁡(60.0∘)=(78.4 N)sin⁡(60.0∘)≈67.9 NF_1 = mg\sin(60.0^\circ) = (78.4\text{ N})\sin(60.0^\circ) \approx 67.9\text{ N}
  • Path 2 (θ2=30.0∘\theta_2 = 30.0^\circ): F2=mgsin⁡(30.0∘)=(78.4 N)(0.500)=39.2 NF_2 = mg\sin(30.0^\circ) = (78.4\text{ N})(0.500) = 39.2\text{ N}

Part (b): Work Done by the Applied Force Along Each Path

The displacement dd along an incline of height HH is: d=Hsin⁡θd = \frac{H}{\sin\theta}

Since the applied force is directed parallel to the displacement (cos⁡0∘=1\cos 0^\circ = 1), the work done is: W=F⋅dW = F \cdot d

  • For Path 1: d1=2.50 msin⁡(60.0∘)≈2.887 md_1 = \frac{2.50\text{ m}}{\sin(60.0^\circ)} \approx 2.887\text{ m} W1=F1d1=(67.896 N)(2.887 m)=196 JW_1 = F_1 d_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J}
  • For Path 2: d2=2.50 msin⁡(30.0∘)=5.00 md_2 = \frac{2.50\text{ m}}{\sin(30.0^\circ)} = 5.00\text{ m} W2=F2d2=(39.2 N)(5.00 m)=196 JW_2 = F_2 d_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}

Part (c): Gravitational Potential Energy and the Work Trade-off

The change in gravitational potential energy depends exclusively on the vertical elevation gained, regardless of the path taken:

ΔUg=mgH=(8.00 kg)(9.80 m/s2)(2.50 m)=196 J\Delta U_g = mgH = (8.00\text{ kg})(9.80\text{ m/s}^2)(2.50\text{ m}) = 196\text{ J}

Thus, for both paths: ΔUg,1=ΔUg,2=196 J\Delta U_{g,1} = \Delta U_{g,2} = 196\text{ J}

Resolving the Paradox

A common misconception is that a longer path requires more work against gravity. However, an incline acts as a simple mechanical trade-off:

  • The gentler incline (θ2=30.0∘\theta_2 = 30.0^\circ) reduces the required force by a factor of sin⁡θ\sin\theta: F=mgsin⁡θF = mg\sin\theta
  • Simultaneously, it increases the distance traveled by the inverse factor 1/sin⁡θ1/\sin\theta: d=Hsin⁡θd = \frac{H}{\sin\theta}

Multiplying the two terms shows that the angle cancels out entirely: W=F⋅d=(mgsin⁡θ)(Hsin⁡θ)=mgHW = F \cdot d = (mg\sin\theta)\left(\frac{H}{\sin\theta}\right) = mgH

Because the kinetic energy remains constant (ΔK=0\Delta K = 0) and there is no friction, the work done by the pushing force equals the change in gravitational potential energy (ΔUg=196 J\Delta U_g = 196\text{ J}) in both cases.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the parallel component of gravity with the normal component by using cosine instead of sine to calculate the applied force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=m⋅g⋅cos⁡(60.0∘)=39.2 N  ⟹  F2=m⋅g⋅cos⁡(30.0∘)=(8.00)(9.80)(0.866)=67.9 NF_1 = m \cdot g \cdot \cos(60.0^\circ) = 39.2\text{ N} \implies F_2 = m \cdot g \cdot \cos(30.0^\circ) = (8.00)(9.80)(0.866) = 67.9\text{ N}

    Correct

    F1=mgsin⁡(60.0∘)≈67.9 N  ⟹  F2=mgsin⁡(30.0∘)=39.2 NF_1 = mg\sin(60.0^\circ) \approx 67.9\text{ N} \implies F_2 = mg\sin(30.0^\circ) = 39.2\text{ N}

    You resolved the component of gravity parallel to the incline using cos⁡θ\cos\theta rather than sin⁡θ\sin\theta. When the incline angle θ\theta is measured relative to the horizontal, the component of gravity pulling down the plane is mgsin⁡θmg\sin\theta, while the perpendicular normal component is mgcos⁡θmg\cos\theta.

  2. Step 2

    d1=2.50sin⁡(60.0∘)=2.887 m,  d2=2.50sin⁡(30.0∘)=5.00 m  ⟹  W1=(39.2)(2.887)=113 J,  W2=(67.9)(5.00)=340 Jd_1 = \frac{2.50}{\sin(60.0^\circ)} = 2.887\text{ m},\; d_2 = \frac{2.50}{\sin(30.0^\circ)} = 5.00\text{ m} \implies W_1 = (39.2)(2.887) = 113\text{ J},\; W_2 = (67.9)(5.00) = 340\text{ J}

    Correct

    W1=F1d1=(67.896 N)(2.887 m)=196 J  ⟹  W2=F2d2=(39.2 N)(5.00 m)=196 JW_1 = F_1 d_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J} \implies W_2 = F_2 d_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}

    You correctly found the ramp displacements using d=Hsin⁡θd = \frac{H}{\sin\theta} and properly multiplied force by displacement, but your work values were thrown off by the incorrect forces from Step 1.

  3. Step 3

    ΔUg=m⋅g⋅H=(8.00)(9.80)(2.50)=196 J for both paths\Delta U_g = m \cdot g \cdot H = (8.00)(9.80)(2.50) = 196\text{ J}\text{ for both paths}

  4. Step 4

    Path 2 requires more work because pushing along a gentler incline requires a larger force over a longer distance.\text{Path 2 requires more work because pushing along a gentler incline requires a larger force over a longer distance.}

    Correct

    W=Fd=(mgsin⁡θ)(Hsin⁡θ)=mgH=196 JW = Fd = (mg\sin\theta)\left(\frac{H}{\sin\theta}\right) = mgH = 196\text{ J}, so the required work is identical for both paths.

    Because of the inverted force formula, you concluded that a gentler ramp requires more force and more work. In reality, a gentler ramp requires less force (39.2 N39.2\text{ N} vs. 67.9 N67.9\text{ N}), and this force reduction exactly balances the increased travel distance, making the total work identical.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the ramp travel lengths using the vertical height and ramp angles.

You correctly set up the formula for work along the ramp as force times displacement.

You correctly calculated the gravitational potential energy change using the vertical height.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Confusion on Incline

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the parallel and perpendicular components of weight on an incline by assigning cos⁡θ\cos\theta to the direction along the ramp instead of sin⁡θ\sin\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Incline Weight Components
  • For an incline tilted at angle θ\theta from the horizontal, weight acts straight down. The component directed down the ramp is W∥=mgsin⁡θW_\parallel = mg\sin\theta, and the component pressing into the ramp is W⊥=mgcos⁡θW_\perp = mg\cos\theta.

  • Check extreme angles: as θ→0∘\theta \to 0^\circ (flat ground), the force pulling an object down the surface must vanish, which matches sin⁡(0∘)=0\sin(0^\circ) = 0, not cos⁡(0∘)=1\cos(0^\circ) = 1.

Checking Work Invariance for Frictionless Lifting
  • By the work-energy theorem with ΔK=0\Delta K = 0 on a frictionless ramp, the input work W=FdW = Fd must exactly equal the gain in gravitational potential energy ΔUg=mgH\Delta U_g = mgH.

  • Always verify whether your calculated work matches mgHmgH; if W≠mgHW \neq mgH, double-check your applied force and displacement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up Newton's second law parallel to the ramp for constant velocity: F−mgsin⁡θ=0  ⟹  F=mgsin⁡θF - mg\sin\theta = 0 \implies F = mg\sin\theta.

  2. Calculate the correct forces: F1=(8.00)(9.80)sin⁡(60.0∘)≈67.9 NF_1 = (8.00)(9.80)\sin(60.0^\circ) \approx 67.9\text{ N} and F2=(8.00)(9.80)sin⁡(30.0∘)=39.2 NF_2 = (8.00)(9.80)\sin(30.0^\circ) = 39.2\text{ N}.

  3. Calculate the work done along each path: W1=(67.896 N)(2.887 m)=196 JW_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J} and W2=(39.2 N)(5.00 m)=196 JW_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}.

  4. Explain the mechanical trade-off: W=F⋅d=(mgsin⁡θ)(Hsin⁡θ)=mgHW = F \cdot d = (mg\sin\theta)\left(\frac{H}{\sin\theta}\right) = mgH, proving that the gentler slope reduces the force by the same factor by which it increases distance.

Final answer

(a) F1=67.9 NF_1 = 67.9\text{ N}, F2=39.2 NF_2 = 39.2\text{ N}; (b) W1=196 JW_1 = 196\text{ J}, W2=196 JW_2 = 196\text{ J}; (c) ΔUg,1=ΔUg,2=196 J\Delta U_{g,1} = \Delta U_{g,2} = 196\text{ J} (the force is reduced by sin⁡θ\sin\theta while the distance increases by 1/sin⁡θ1/\sin\theta, leaving total work W=mgHW = mgH invariant)

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a clear right-triangle force decomposition for gravity on an inclined plane showing why the angle between the vertical weight vector and the normal axis is θ\theta.

  • Practice testing limiting cases (such as θ=0∘\theta = 0^\circ and θ=90∘\theta = 90^\circ) whenever choosing between sine and cosine for force components.

  • Re-solve one problem involving work on an incline using both W=FdW = Fd and W=ΔUgW = \Delta U_g to confirm that both methods yield identical results.

OverviewACEpath Teacher's Diagnosis

02 The student uses the vertical height H directly as the displacement along the incline instead of the ramp length when calculating work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F1=m⋅g⋅sin⁡(60.0∘)=(8.00)(9.80)(0.866)=67.9 N  ⟹  F2=m⋅g⋅sin⁡(30.0∘)=(8.00)(9.80)(0.500)=39.2 NF_1 = m \cdot g \cdot \sin(60.0^\circ) = (8.00)(9.80)(0.866) = 67.9\text{ N} \implies F_2 = m \cdot g \cdot \sin(30.0^\circ) = (8.00)(9.80)(0.500) = 39.2\text{ N}

  2. Step 2

    W1=F1⋅H=(67.9)(2.50)=170 J  ⟹  W2=F2⋅H=(39.2)(2.50)=98.0 JW_1 = F_1 \cdot H = (67.9)(2.50) = 170\text{ J} \implies W_2 = F_2 \cdot H = (39.2)(2.50) = 98.0\text{ J}

    Correct

    W1=F1d1=F1(Hsin⁡60.0∘)=196 J  ⟹  W2=F2d2=F2(Hsin⁡30.0∘)=196 JW_1 = F_1 d_1 = F_1 \left(\frac{H}{\sin 60.0^\circ}\right) = 196\text{ J} \implies W_2 = F_2 d_2 = F_2 \left(\frac{H}{\sin 30.0^\circ}\right) = 196\text{ J}

    Work is defined as W=Fdcos⁡ϕW = F d \cos\phi. Because your applied force acts parallel to the incline, the displacement must be the distance along the ramp, d=H/sin⁡θd = H/\sin\theta, not the vertical height HH.

  3. Step 3

    ΔUg=m⋅g⋅H=(8.00)(9.80)(2.50)=196 J for both paths\Delta U_g = m \cdot g \cdot H = (8.00)(9.80)(2.50) = 196\text{ J}\text{ for both paths}

  4. Step 4

    The work values differ because Path 1 requires a steeper push over the vertical height H.\text{The work values differ because Path 1 requires a steeper push over the vertical height } H.

    Correct

    W1=W2=ΔUg=196 J; the ramp reduces the required force by sin⁡θ while increasing the distance by 1/sin⁡θ, leaving work invariant.W_1 = W_2 = \Delta U_g = 196\text{ J}\text{; the ramp reduces the required force by } \sin\theta \text{ while increasing the distance by } 1/\sin\theta\text{, leaving work invariant.}

    Because your work calculations in part (b) used HH instead of the ramp length, you concluded that the work differed between the two ramps, whereas the actual work done along each frictionless path is identical.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's second law to balance forces along each ramp at constant speed.

You correctly calculated the gravitational potential energy change using the vertical height HH.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Displacement Along Incline vs. Vertical Height

You substituted the vertical elevation HH into W=F⋅dW = F \cdot d instead of the actual distance traveled along the incline d=H/sin⁡θd = H/\sin\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the displacement along the line of action of the applied force (d=H/sin⁡θd = H/\sin\theta) with the vertical elevation gain (HH) used for potential energy.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Force Direction to Displacement Direction
  • For work W=Fdcos⁡ϕW = F d \cos\phi, the distance dd must be measured along the path where the force is applied.

  • When a force pushes parallel to an incline of angle θ\theta and height HH, always use the ramp length d=H/sin⁡θd = H/\sin\theta as the displacement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the path length along each ramp: d1=Hsin⁡60.0∘=2.50 msin⁡60.0∘≈2.887 md_1 = \frac{H}{\sin 60.0^\circ} = \frac{2.50\text{ m}}{\sin 60.0^\circ} \approx 2.887\text{ m}, and d2=Hsin⁡30.0∘=2.50 m0.500=5.00 md_2 = \frac{H}{\sin 30.0^\circ} = \frac{2.50\text{ m}}{0.500} = 5.00\text{ m}.

  2. Calculate the work done along Path 1: W1=F1d1=(67.896 N)(2.887 m)=196 JW_1 = F_1 d_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J}.

  3. Calculate the work done along Path 2: W2=F2d2=(39.2 N)(5.00 m)=196 JW_2 = F_2 d_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}.

  4. Observe that W=(mgsin⁡θ)(Hsin⁡θ)=mgH=196 JW = (mg\sin\theta)\left(\frac{H}{\sin\theta}\right) = mgH = 196\text{ J}, which perfectly matches ΔUg\Delta U_g for both configurations.

Final answer

(a) F1=67.9 NF_1 = 67.9\text{ N}, F2=39.2 NF_2 = 39.2\text{ N}; (b) W1=196 JW_1 = 196\text{ J}, W2=196 JW_2 = 196\text{ J}; (c) ΔUg,1=ΔUg,2=196 J\Delta U_{g,1} = \Delta U_{g,2} = 196\text{ J} (the factor of sin⁡θ\sin\theta reduction in force is exactly offset by the 1/sin⁡θ1/\sin\theta factor increase in distance, so W=Fd=mgHW = Fd = mgH)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how trigonometry connects the vertical height HH to the ramp distance d=H/sin⁡θd = H/\sin\theta.

  • Practice identifying the parallel displacement whenever computing work done by an applied force on an inclined plane.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the applied force must simply equal the carton's full weight m·g regardless of the incline angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F1=m⋅g=(8.00)(9.80)=78.4 N  ⟹  F2=m⋅g=(8.00)(9.80)=78.4 NF_1 = m \cdot g = (8.00)(9.80) = 78.4\text{ N} \implies F_2 = m \cdot g = (8.00)(9.80) = 78.4\text{ N}

    Correct

    F1=mgsin⁡(60.0∘)≈67.9 N  ⟹  F2=mgsin⁡(30.0∘)=39.2 NF_1 = mg\sin(60.0^\circ) \approx 67.9\text{ N} \implies F_2 = mg\sin(30.0^\circ) = 39.2\text{ N}

    Because the carton is pushed along an incline at constant velocity, the applied force needs to balance only the parallel component of gravity, mgsin⁡θmg\sin\theta, not the entire weight mgmg.

  2. Step 2

    d1=2.50sin⁡(60.0∘)=2.887 m,W1=(78.4)(2.887)=226 J  ⟹  d2=2.50sin⁡(30.0∘)=5.00 m,W2=(78.4)(5.00)=392 Jd_1 = \frac{2.50}{\sin(60.0^\circ)} = 2.887\text{ m}, W_1 = (78.4)(2.887) = 226\text{ J} \implies d_2 = \frac{2.50}{\sin(30.0^\circ)} = 5.00\text{ m}, W_2 = (78.4)(5.00) = 392\text{ J}

    Correct

    W1=F1d1=(67.896 N)(2.887 m)=196 J  ⟹  W2=F2d2=(39.2 N)(5.00 m)=196 JW_1 = F_1 d_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J} \implies W_2 = F_2 d_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}

    You calculated the distances d1d_1 and d2d_2 correctly, but substituting the incorrect force of 78.4 N78.4\text{ N} caused the work values to be incorrect.

  3. Step 3

    ΔUg=m⋅g⋅H=(8.00)(9.80)(2.50)=196 J for both paths\Delta U_g = m \cdot g \cdot H = (8.00)(9.80)(2.50) = 196\text{ J} \text{ for both paths}

  4. Step 4

    Path 2 requires more work because the same full weight must be pushed over a longer distance.\text{Path 2 requires more work because the same full weight must be pushed over a longer distance.}

    Correct

    The required force is reduced by sin⁡θ while distance increases by 1/sin⁡θ, so W=(mgsin⁡θ)(H/sin⁡θ)=mgH=196 J on both paths.\text{The required force is reduced by } \sin\theta \text{ while distance increases by } 1/\sin\theta, \text{ so } W = (mg\sin\theta)(H/\sin\theta) = mgH = 196\text{ J} \text{ on both paths.}

    Path 2 does not require pushing against the full weight; the normal force supports mgcos⁡(30.0∘)mg\cos(30.0^\circ), reducing the pushing force to half the weight and keeping the total work equal to 196 J196\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used trigonometry to calculate the ramp lengths d1=2.887 md_1 = 2.887\text{ m} and d2=5.00 md_2 = 5.00\text{ m}.

You correctly evaluated the change in gravitational potential energy as ΔUg=mgH=196 J\Delta U_g = mgH = 196\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating incline pushing force to full vertical weight

You set the pushing force equal to mgmg instead of taking the component along the incline, mgsin⁡θmg\sin\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated pushing an object up a ramp as if lifting it straight up vertically. On a frictionless incline, the ramp's normal force supports the perpendicular component mgcos⁡θmg\cos\theta, so the applied force only needs to overcome the parallel component mgsin⁡θmg\sin\theta. A gentler ramp reduces the required force by the exact factor sin⁡θ\sin\theta that increases the ramp length H/sin⁡θH/\sin\theta, keeping total work W=Fd=mgHW = Fd = mgH constant.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolve forces along the ramp coordinate axis
  • For motion along an incline of angle θ\theta, weight resolves into mgsin⁡θmg\sin\theta parallel down the ramp and mgcos⁡θmg\cos\theta perpendicular into the ramp.

  • Always draw a free-body diagram aligned with the ramp surface before writing ∑F=ma\sum F = ma.

Work invariance on simple machines
  • A frictionless simple machine trades less applied force for more distance, leaving work W=Fd=mgHW = Fd = mgH equal to ΔUg\Delta U_g.

  • Check whether your calculated work matches the change in potential energy when ΔK=0\Delta K = 0 and no dissipative forces act.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Balance forces parallel to the surface for constant velocity: F−mgsin⁡θ=0  ⟹  F=mgsin⁡θF - mg\sin\theta = 0 \implies F = mg\sin\theta.

  2. For Path 1 (θ1=60.0∘\theta_1 = 60.0^\circ): F1=(8.00)(9.80)sin⁡(60.0∘)=78.4×0.8660≈67.9 NF_1 = (8.00)(9.80)\sin(60.0^\circ) = 78.4 \times 0.8660 \approx 67.9\text{ N}.

  3. For Path 2 (θ2=30.0∘\theta_2 = 30.0^\circ): F2=(8.00)(9.80)sin⁡(30.0∘)=78.4×0.500=39.2 NF_2 = (8.00)(9.80)\sin(30.0^\circ) = 78.4 \times 0.500 = 39.2\text{ N}.

  4. Compute work along each path: W1=F1d1=(67.896 N)(2.887 m)=196 JW_1 = F_1 d_1 = (67.896\text{ N})(2.887\text{ m}) = 196\text{ J} and W2=F2d2=(39.2 N)(5.00 m)=196 JW_2 = F_2 d_2 = (39.2\text{ N})(5.00\text{ m}) = 196\text{ J}.

  5. Compare with potential energy: ΔUg=mgH=196 J\Delta U_g = mgH = 196\text{ J}, confirming W1=W2=ΔUgW_1 = W_2 = \Delta U_g because the ramp trades force for distance.

Final answer

(a) F1=67.9 NF_1 = 67.9\text{ N}, F2=39.2 NF_2 = 39.2\text{ N}; (b) W1=196 JW_1 = 196\text{ J}, W2=196 JW_2 = 196\text{ J}; (c) ΔUg,1=ΔUg,2=196 J\Delta U_{g,1} = \Delta U_{g,2} = 196\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector decomposition of gravity on an inclined plane into parallel (mgsin⁡θmg\sin\theta) and perpendicular (mgcos⁡θmg\cos\theta) components.

  • Practice using the work-energy theorem (Wext=ΔUgW_{\text{ext}} = \Delta U_g) to cross-check work calculations on frictionless ramps.

Lock it in

Similar question

01

A 5.00 kg5.00\text{ kg} box is pulled up a frictionless ramp inclined at 45.0∘45.0^\circ at a constant speed to a vertical height of 3.00 m3.00\text{ m}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the pulling force parallel to the incline, (b) the length of the ramp, and (c) the total work done by the pulling force.

Answer

(a) F=mgsin⁡(45.0∘)=(5.00)(9.80)(0.7071)=34.6 NF = mg\sin(45.0^\circ) = (5.00)(9.80)(0.7071) = 34.6\text{ N}. (b) d=Hsin⁡(45.0∘)=3.000.7071=4.24 md = \frac{H}{\sin(45.0^\circ)} = \frac{3.00}{0.7071} = 4.24\text{ m}. (c) W=Fd=(34.65 N)(4.243 m)=147 JW = Fd = (34.65\text{ N})(4.243\text{ m}) = 147\text{ J} (or W=mgH=(5.00)(9.80)(3.00)=147 JW = mgH = (5.00)(9.80)(3.00) = 147\text{ J}).

02

A worker rolls a 60.0 kg60.0\text{ kg} barrel up a frictionless incline of angle θ=20.0∘\theta = 20.0^\circ at constant velocity. (a) What force parallel to the incline must the worker exert? (b) If the incline is 6.00 m6.00\text{ m} long, calculate the work done by the worker and the vertical height gained. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

(a) F=mgsin⁡(20.0∘)=(60.0)(9.80)(0.3420)=201 NF = mg\sin(20.0^\circ) = (60.0)(9.80)(0.3420) = 201\text{ N}. (b) Vertical height H=dsin⁡(20.0∘)=(6.00 m)(0.3420)=2.05 mH = d\sin(20.0^\circ) = (6.00\text{ m})(0.3420) = 2.05\text{ m}. Work W=Fd=(201.1 N)(6.00 m)=1.21×103 JW = Fd = (201.1\text{ N})(6.00\text{ m}) = 1.21 \times 10^3\text{ J} (equivalently, W=mgH=(60.0)(9.80)(2.052)=1.21×103 JW = mgH = (60.0)(9.80)(2.052) = 1.21 \times 10^3\text{ J}).

03

A cart of mass MM is hauled at constant speed up a frictionless ramp from ground level to height HH. Prove algebraically that the work done by a force applied parallel to the surface is independent of the ramp angle θ\theta, and explain why increasing the angle changes the required force but not the total energy transferred.

Answer

For constant speed, F=Mgsin⁡θF = Mg\sin\theta. The distance along the ramp is d=Hsin⁡θd = \frac{H}{\sin\theta}. Work is W=Fd=(Mgsin⁡θ)(Hsin⁡θ)=MgHW = Fd = (Mg\sin\theta)\left(\frac{H}{\sin\theta}\right) = MgH. The factor sin⁡θ\sin\theta cancels out entirely: steeper inclines require a greater force (Mgsin⁡θMg\sin\theta) over a shorter distance (H/sin⁡θH/\sin\theta), while gentler inclines require a smaller force over a longer distance. The total energy transferred equals the gravitational potential energy gained, ΔUg=MgH\Delta U_g = MgH.

Loading workspace…