Resources

A micro-fabricated sensor trace on an integrated circuit has a length of L=8.50 mmL = 8.50\text{ mm} and carries a direct current of I=125 mAI = 125\text{ mA}. The trace lies perpendicular to a magnetic field generated by an electromagnet, which is measured in laboratory units as B=4.20 kGB = 4.20\text{ kG} (1 kG=103 G1\text{ kG} = 10^3\text{ G}, where 1 G=10−4 T1\text{ G} = 10^{-4}\text{ T}). Convert all quantities to standard SI units and calculate the resulting magnetic force FBF_B exerted on the trace in micronewtons (μN\mu\text{N}).

Answer and steps

Final answer

FB=446 μNF_B = 446\text{ }\mu\text{N} (or 4.46×10−4 N4.46 \times 10^{-4}\text{ N})

Steps

01

Identify the Formula and Given Values

The magnetic force exerted on a straight wire carrying current in a uniform magnetic field is given by:

FB=ILBsin⁡θF_B = I L B \sin\theta

where:

  • II is the electric current through the conductor.
  • LL is the length of the conductor in the field.
  • BB is the magnetic field strength.
  • θ\theta is the angle between the direction of the current and the magnetic field vector.

Because the sensor trace lies perpendicular to the magnetic field, θ=90∘\theta = 90^\circ, which gives sin⁡(90∘)=1\sin(90^\circ) = 1. The formula simplifies to:

FB=ILBF_B = I L B


02

Convert All Quantities to Standard SI Units

To calculate the force in newtons (N\text{N}), all input parameters must be expressed in SI base units (A\text{A}, m\text{m}, and T\text{T}):

  • Current (II): I=125 mA=125×10−3 A=0.125 AI = 125\text{ mA} = 125 \times 10^{-3}\text{ A} = 0.125\text{ A}
  • Length (LL): L=8.50 mm=8.50×10−3 mL = 8.50\text{ mm} = 8.50 \times 10^{-3}\text{ m}
  • Magnetic Field (BB): Using 1 kG=103 G1\text{ kG} = 10^3\text{ G} and 1 G=10−4 T1\text{ G} = 10^{-4}\text{ T}: B=4.20 kG=4.20×103 G=(4.20×103)×10−4 T=0.420 TB = 4.20\text{ kG} = 4.20 \times 10^3\text{ G} = (4.20 \times 10^3) \times 10^{-4}\text{ T} = 0.420\text{ T}

03

Calculate the Magnetic Force

Substitute the converted values into the simplified force formula:

FB=(0.125 A)⋅(8.50×10−3 m)⋅(0.420 T)F_B = (0.125\text{ A}) \cdot (8.50 \times 10^{-3}\text{ m}) \cdot (0.420\text{ T})

FB=4.4625×10−4 NF_B = 4.4625 \times 10^{-4}\text{ N}


04

Convert to Micronewtons (μN\mu\text{N})

Since 1 μN=10−6 N1\text{ }\mu\text{N} = 10^{-6}\text{ N}:

FB=4.4625×10−4 N10−6 N/μN=446.25 μNF_B = \frac{4.4625 \times 10^{-4}\text{ N}}{10^{-6}\text{ N/}\mu\text{N}} = 446.25\text{ }\mu\text{N}

Rounding to three significant figures gives:

FB=446 μN(or 4.46×10−4 N)F_B = 446\text{ }\mu\text{N} \quad (\text{or } 4.46 \times 10^{-4}\text{ N})

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the prefix kilo- as 10⁻³ instead of 10³, leading to an underestimated magnetic field and force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=8.50 mm=8.50×10−3 m  ⟹  I=125 mA=0.125 AL = 8.50\text{ mm} = 8.50 \times 10^{-3}\text{ m} \implies I = 125\text{ mA} = 0.125\text{ A}

  2. Step 2

    B=4.20×10−3×10−4 T=4.20×10−7 TB = 4.20 \times 10^{-3} \times 10^{-4}\text{ T} = 4.20 \times 10^{-7}\text{ T}

    Correct

    B=4.20 kG=4.20×103 G=(4.20×103)×10−4 T=0.420 TB = 4.20\text{ kG} = 4.20 \times 10^3\text{ G} = (4.20 \times 10^3) \times 10^{-4}\text{ T} = 0.420\text{ T}

    You substituted 10−310^{-3} instead of 10310^3 for the prefix kilo- (k\text{k}). Because 1 kG=103 G1\text{ kG} = 10^3\text{ G}, multiplying by 10−4 T/G10^{-4}\text{ T/G} gives 0.420 T0.420\text{ T}, not 4.20×10−7 T4.20 \times 10^{-7}\text{ T}.

  3. Step 3

    FB=I⋅L⋅B=0.125×(8.50×10−3)×(4.20×10−7)=4.4625×10−10 NF_B = I \cdot L \cdot B = 0.125 \times (8.50 \times 10^{-3}) \times (4.20 \times 10^{-7}) = 4.4625 \times 10^{-10}\text{ N}

    Correct

    FB=ILB=(0.125 A)(8.50×10−3 m)(0.420 T)=4.4625×10−4 NF_B = I L B = (0.125\text{ A})(8.50 \times 10^{-3}\text{ m})(0.420\text{ T}) = 4.4625 \times 10^{-4}\text{ N}

    Your substitution and calculation using the magnetic force formula were algebraically correct, but the result inherited the error from the incorrect magnetic field value.

  4. Step 4

    FB=4.4625×10−10×106 μN=4.4625×10−4 μNF_B = 4.4625 \times 10^{-10} \times 10^6\text{ }\mu\text{N} = 4.4625 \times 10^{-4}\text{ }\mu\text{N}

    Correct

    FB=(4.4625×10−4 N)×106 μN/N≈446 μNF_B = (4.4625 \times 10^{-4}\text{ N}) \times 10^6\text{ }\mu\text{N/N} \approx 446\text{ }\mu\text{N}

    You correctly multiplied by 106 μN/N10^6\text{ }\mu\text{N/N} to convert from newtons to micronewtons, but the initial force value was off by a factor of 10610^6 due to the earlier conversion slip.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the perpendicular magnetic force formula FB=ILBF_B = I L B.

You properly converted length from millimeters to meters and current from milliamperes to amperes.

You correctly applied the conversion factor 1 N=106 μN1\text{ N} = 10^6\text{ }\mu\text{N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix sign confusion

You wrote 10−310^{-3} instead of 10310^3 when expanding the prefix kilo- in kilogauss.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the positive power metric prefix kilo- (10310^3) with the negative power metric prefix milli- (10−310^{-3}) during multi-step unit conversion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check prefix sign and magnitude
  • Kilo- (k\text{k}) denotes 10310^3 (thousands), whereas milli- (m\text{m}) denotes 10−310^{-3} (thousandths).

  • Whenever you see a lowercase 'k' in front of a unit, replace it with ×103\times 10^3 before continuing conversion.

Chain unit conversions explicitly
  • Write out conversion fractions so units cancel cleanly: B=(4.20 kG)×(103 G1 kG)×(10−4 T1 G)=0.420 TB = (4.20\text{ kG}) \times \left(\frac{10^3\text{ G}}{1\text{ kG}}\right) \times \left(\frac{10^{-4}\text{ T}}{1\text{ G}}\right) = 0.420\text{ T}.

  • Set up dimensional analysis factors to eliminate ambiguity in the power of 10.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert kilogauss to teslas: B=4.20 kG=4.20×103 G=(4.20×103)×10−4 T=0.420 TB = 4.20\text{ kG} = 4.20 \times 10^3\text{ G} = (4.20 \times 10^3) \times 10^{-4}\text{ T} = 0.420\text{ T}.

  2. Compute the magnetic force in newtons: FB=ILB=(0.125 A)(8.50×10−3 m)(0.420 T)=4.4625×10−4 NF_B = I L B = (0.125\text{ A})(8.50 \times 10^{-3}\text{ m})(0.420\text{ T}) = 4.4625 \times 10^{-4}\text{ N}.

  3. Convert newtons to micronewtons: FB=(4.4625×10−4 N)×106 μN/N=446.25 μN≈446 μNF_B = (4.4625 \times 10^{-4}\text{ N}) \times 10^6\text{ }\mu\text{N/N} = 446.25\text{ }\mu\text{N} \approx 446\text{ }\mu\text{N}.

Final answer

FB=446 μNF_B = 446\text{ }\mu\text{N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review common SI prefixes, especially the distinction between large multipliers (kilo =103= 10^3, mega =106= 10^6) and small fractions (milli =10−3= 10^{-3}, micro =10−6= 10^{-6}).

  • Practice converting non-standard magnetic field units (such as gauss and kilogauss) directly to teslas.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert length from millimeters to meters, using 8.50 instead of 8.50 × 10⁻³ m in the force formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=8.50 mm  ⟹  I=125 mA=0.125 A  ⟹  B=4.20×103×10−4 T=0.420 TL = 8.50\text{ mm} \implies I = 125\text{ mA} = 0.125\text{ A} \implies B = 4.20 \times 10^3 \times 10^{-4}\text{ T} = 0.420\text{ T}

    Correct

    L=8.50 mm=8.50×10−3 mL = 8.50\text{ mm} = 8.50 \times 10^{-3}\text{ m}, I=125 mA=0.125 AI = 125\text{ mA} = 0.125\text{ A}, and B=0.420 TB = 0.420\text{ T}

    You correctly converted the current to amperes and the magnetic field from kilogauss to teslas, but you left the length in millimeters instead of converting it to the base SI unit of meters (8.50×10−3 m8.50 \times 10^{-3}\text{ m}).

  2. Step 2

    FB=I⋅L⋅B=0.125×8.50×0.420=0.44625 NF_B = I \cdot L \cdot B = 0.125 \times 8.50 \times 0.420 = 0.44625\text{ N}

    Correct

    FB=ILB=(0.125 A)(8.50×10−3 m)(0.420 T)=4.4625×10−4 NF_B = I L B = (0.125\text{ A})(8.50 \times 10^{-3}\text{ m})(0.420\text{ T}) = 4.4625 \times 10^{-4}\text{ N}

    You correctly selected and applied the perpendicular force formula FB=ILBF_B = I L B, but substituting the uncoverted value 8.508.50 instead of 8.50×10−3 m8.50 \times 10^{-3}\text{ m} yielded an intermediate force in newtons that was 10001000 times too large.

  3. Step 3

    FB=0.44625×106 μN=446250 μNF_B = 0.44625 \times 10^6\text{ }\mu\text{N} = 446250\text{ }\mu\text{N}

    Correct

    FB=(4.4625×10−4 N)×106 μN/N≈446 μNF_B = (4.4625 \times 10^{-4}\text{ N}) \times 10^6\text{ }\mu\text{N/N} \approx 446\text{ }\mu\text{N}

    You correctly used the conversion factor 1 N=106 μN1\text{ N} = 10^6\text{ }\mu\text{N}, but because your force in newtons carried the earlier length unit error, your final answer became 446250 μN446250\text{ }\mu\text{N} instead of 446 μN446\text{ }\mu\text{N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the magnetic force formula for a perpendicular wire, FB=ILBF_B = I L B.

You accurately converted the current from milliamperes to amperes (125 mA=0.125 A125\text{ mA} = 0.125\text{ A}).

You successfully converted the magnetic field from kilogauss to teslas (4.20 kG=0.420 T4.20\text{ kG} = 0.420\text{ T}).

You correctly recognized that 1 N=106 μN1\text{ N} = 10^6\text{ }\mu\text{N} when attempting the prefix conversion to micronewtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion for length

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the numerical value of length directly in millimeters (8.508.50) rather than converting it to the SI base unit of meters (8.50×10−3 m8.50 \times 10^{-3}\text{ m}) prior to calculating force in newtons.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Base Unit Consistency
  • In electromagnetic force formulas (FB=ILBF_B = I L B), length LL must be in meters (m\text{m}) so that A⋅m⋅T=N\text{A} \cdot \text{m} \cdot \text{T} = \text{N}.

  • Always convert every metric prefix (such as mm\text{mm} to m\text{m}, where 1 mm=10−3 m1\text{ mm} = 10^{-3}\text{ m}) before evaluating the product.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert length to SI units: L=8.50 mm=8.50×10−3 mL = 8.50\text{ mm} = 8.50 \times 10^{-3}\text{ m}.

  2. Substitute the SI values into the force equation: FB=(0.125 A)(8.50×10−3 m)(0.420 T)=4.4625×10−4 NF_B = (0.125\text{ A})(8.50 \times 10^{-3}\text{ m})(0.420\text{ T}) = 4.4625 \times 10^{-4}\text{ N}.

  3. Convert newtons to micronewtons: FB=(4.4625×10−4 N)×106 μN/N=446.25 μN≈446 μNF_B = (4.4625 \times 10^{-4}\text{ N}) \times 10^6\text{ }\mu\text{N/N} = 446.25\text{ }\mu\text{N} \approx 446\text{ }\mu\text{N}.

Final answer

FB=446 μNF_B = 446\text{ }\mu\text{N} (or 4.46×10−4 N4.46 \times 10^{-4}\text{ N})

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out explicit unit conversions for every given parameter before plugging numbers into physical formulas.

  • Check that all intermediate quantities result in base SI units (m\text{m}, kg\text{kg}, s\text{s}, A\text{A}) to ensure dimensional consistency.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 10⁻⁶ instead of dividing when converting force from newtons to micronewtons.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    L=8.50×10−3 m  ⟹  I=125×10−3 A=0.125 A  ⟹  B=4.20×103×10−4 T=0.420 TL = 8.50 \times 10^{-3}\text{ m} \implies I = 125 \times 10^{-3}\text{ A} = 0.125\text{ A} \implies B = 4.20 \times 10^3 \times 10^{-4}\text{ T} = 0.420\text{ T}

  2. Step 2

    FB=0.125×(8.50×10−3)×0.420=4.4625×10−4 NF_B = 0.125 \times (8.50 \times 10^{-3}) \times 0.420 = 4.4625 \times 10^{-4}\text{ N}

  3. Step 3

    FB=4.4625×10−4×10−6 μN=4.4625×10−10 μNF_B = 4.4625 \times 10^{-4} \times 10^{-6}\text{ }\mu\text{N} = 4.4625 \times 10^{-10}\text{ }\mu\text{N}

    Correct

    FB=4.4625×10−4 N10−6 N/μN=4.4625×10−4×106 μN=446.25 μN≈446 μNF_B = \frac{4.4625 \times 10^{-4}\text{ N}}{10^{-6}\text{ N}/\mu\text{N}} = 4.4625 \times 10^{-4} \times 10^6\text{ }\mu\text{N} = 446.25\text{ }\mu\text{N} \approx 446\text{ }\mu\text{N}

    You multiplied by 10−610^{-6} instead of dividing by 10−610^{-6}. Because 1 μN=10−6 N1\text{ }\mu\text{N} = 10^{-6}\text{ N}, converting from a larger base unit (N\text{N}) to a smaller metric-prefixed unit (μN\mu\text{N}) requires multiplying by 10610^6 or dividing by 10−610^{-6}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted milliamperes, millimeters, and kilogauss into standard SI units.

You selected and calculated the magnetic force using FB=ILBF_B = I L B accurately in newtons.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Prefix conversion inverted (multiplied instead of divided)

Multiplying by the prefix factor 10−610^{-6} when moving from the base unit to the micro-unit.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating unit substitution with unit factor cancellation. While 1 μN1\text{ }\mu\text{N} can be directly replaced by 10−6 N10^{-6}\text{ N}, replacing N\text{N} requires using 1 N=106 μN1\text{ N} = 10^6\text{ }\mu\text{N}. Converting to a smaller unit must always result in a larger numerical magnitude.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Metric Scaling
  • When converting from a base unit to a sub-unit with prefix 10−n10^{-n}, the numerical value must increase by a factor of 10n10^n.

  • Check your units with dimensional analysis: multiply by the fraction (1 μN10−6 N)\left(\frac{1\text{ }\mu\text{N}}{10^{-6}\text{ N}}\right) so that N\text{N} cancels in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply dimensional analysis with the conversion factor 1 μN=10−6 N1\text{ }\mu\text{N} = 10^{-6}\text{ N}: FB=4.4625×10−4 N×1 μN10−6 NF_B = 4.4625 \times 10^{-4}\text{ N} \times \frac{1\text{ }\mu\text{N}}{10^{-6}\text{ N}}

  2. Simplify the powers of ten: 4.4625×10−4−(−6) μN=4.4625×102 μN=446.25 μN4.4625 \times 10^{-4 - (-6)}\text{ }\mu\text{N} = 4.4625 \times 10^2\text{ }\mu\text{N} = 446.25\text{ }\mu\text{N}

  3. Round to three significant figures to match the given data: FB=446 μNF_B = 446\text{ }\mu\text{N}

Final answer

FB=446 μNF_B = 446\text{ }\mu\text{N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Use conversion fractions where the unwanted unit cancels out algebraically.

  • Perform a quick magnitude sanity check: a micro-unit should always yield a larger numerical coefficient than the base unit.

Lock it in

Similar question

01

A straight wire of length L=5.0 cmL = 5.0\text{ cm} carries a current of I=2.0 AI = 2.0\text{ A} perpendicular to a uniform magnetic field of B=3.0 kGB = 3.0\text{ kG}. Calculate the magnetic force on the wire in newtons.

Answer

FB=0.030 NF_B = 0.030\text{ N}. Steps: Convert units: L=0.050 mL = 0.050\text{ m}, B=3.0×103×10−4 T=0.30 TB = 3.0 \times 10^3 \times 10^{-4}\text{ T} = 0.30\text{ T}. Apply FB=ILB=(2.0 A)(0.050 m)(0.30 T)=0.030 NF_B = I L B = (2.0\text{ A})(0.050\text{ m})(0.30\text{ T}) = 0.030\text{ N}.

02

A micro-actuator wire has length L=12.0 mmL = 12.0\text{ mm} and carries a current of I=250 mAI = 250\text{ mA}. It is oriented at an angle of θ=30∘\theta = 30^\circ relative to a uniform field of B=6.0 kGB = 6.0\text{ kG}. Find the magnetic force exerted on the wire in micronewtons (μN\mu\text{N}).

Answer

FB=900 μNF_B = 900\text{ }\mu\text{N}. Steps: Convert units: L=12.0×10−3 mL = 12.0 \times 10^{-3}\text{ m}, I=0.250 AI = 0.250\text{ A}, B=6.0×103×10−4 T=0.60 TB = 6.0 \times 10^3 \times 10^{-4}\text{ T} = 0.60\text{ T}. Calculate force: FB=ILBsin⁡(30∘)=(0.250)(12.0×10−3)(0.60)(0.5)=9.0×10−4 N=900 μNF_B = I L B \sin(30^\circ) = (0.250)(12.0 \times 10^{-3})(0.60)(0.5) = 9.0 \times 10^{-4}\text{ N} = 900\text{ }\mu\text{N}.

03

A straight conductor of length L=4.00 mmL = 4.00\text{ mm} carries a direct current in a perpendicular magnetic field of B=1.50 kGB = 1.50\text{ kG}. The resulting magnetic force is measured to be FB=180 μNF_B = 180\text{ }\mu\text{N}. Determine the current II flowing through the conductor in milliamperes (mA\text{mA}).

Answer

I=300 mAI = 300\text{ mA}. Steps: Convert knowns to SI: L=4.00×10−3 mL = 4.00 \times 10^{-3}\text{ m}, B=1.50×103×10−4 T=0.150 TB = 1.50 \times 10^3 \times 10^{-4}\text{ T} = 0.150\text{ T}, FB=180×10−6 N=1.80×10−4 NF_B = 180 \times 10^{-6}\text{ N} = 1.80 \times 10^{-4}\text{ N}. Solve for I=FBLB=1.80×10−4(4.00×10−3)(0.150)=0.300 A=300 mAI = \frac{F_B}{L B} = \frac{1.80 \times 10^{-4}}{(4.00 \times 10^{-3})(0.150)} = 0.300\text{ A} = 300\text{ mA}.

Loading workspace…