Resources
A laboratory loudspeaker generates a pitch that completes oscillation cycles during a time interval of . Express the time period of one oscillation cycle in microseconds (), calculate the frequency of the emitted tone in kilohertz (), and state whether this wave produces an audible pitch or lies in the ultrasonic regime.
Answer and steps
Final answer
Period , Frequency , the wave produces an audible pitch ()
Steps
Convert the Total Time Interval to Seconds
The total elapsed time is given in minutes. Convert into seconds:
Calculate the Frequency in Hertz and Kilohertz
Frequency is defined as the number of oscillation cycles completed per unit time:
Substitute the given values:
To convert the frequency to kilohertz (), divide by :
Determine the Period of One Cycle
The period is the duration of a single complete oscillation, which is the reciprocal of the frequency:
Expressing the numerical value in microsecond units as specified gives:
(Note: In strict prefix notation, .)
Determine Whether the Pitch is Audible or Ultrasonic
The standard audible frequency range for human hearing is:
- Sound waves with frequencies below are infrasonic.
- Sound waves with frequencies exceeding are ultrasonic.
Because the emitted frequency is , which satisfies , the wave produces an audible pitch (specifically the standard musical tuning pitch, ) and does not lie in the ultrasonic regime.
Typical errors
01 The student forgets to convert the time interval from minutes to seconds, calculating the period and frequency using minutes instead.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set up the period formula correctly as , but you substituted without converting to seconds. Furthermore, you treated as microseconds (), whereas .
- Step 2Correct
You correctly related frequency to cycles over time, but dividing cycles by minutes yields cycles per minute rather than hertz (). Converting to gives .
- Step 3Correct
Your reasoning that a frequency above is ultrasonic is conceptually correct, but it relies directly on the uncorrected frequency from the previous step. The actual frequency is , which is well within the human audible range.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the definitions relating total cycles, elapsed time, period, and frequency.
You correctly identified as the upper threshold of human hearing separating audible sound from ultrasound.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the given time interval in minutes directly into the formulas without converting it into SI base units (seconds).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking the definition of the hertz () and SI prefixes (), leading to calculations performed in non-SI units (minutes) that were directly mislabeled as and .
REASONING PATH
Your ACEpath teacher’s suggested approach- Convert time to SI base units
Always convert minutes to seconds before calculating frequency: .
Multiply by to obtain before calculating period or frequency.
- Match units to standard definitions
One hertz is strictly one cycle per second ().
Verify that your time variable is in seconds whenever you report frequency in or .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the total time to seconds: .
Calculate frequency: .
Determine the period: (or ).
Compare with the audible hearing range ( to ): since lies between and , the tone is an audible pitch.
Period (or ), frequency , and the wave produces an audible pitch.
02 The student inverts the formulas for period and frequency, taking period as oscillations per unit time and frequency as time per oscillation.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You defined the period as cycles per second rather than the time required for one complete cycle. Period is , which gives approximately .
- Step 3Correct
You defined frequency as time per cycle instead of the number of cycles per unit time. Frequency is .
- Step 4
0.00227 20
Correct20 440 20
Your classification followed logically from your inverted frequency value, but because the true frequency is , the sound falls well within the human audible range of to .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted the total time interval from minutes to seconds accurately.
You recognized the standard human hearing boundary of .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou swapped the definitions of frequency and period, treating period as the rate of cycles over time and frequency as the duration per cycle.
REASONING PATH
Your ACEpath teacher’s suggested approach- Period vs. Frequency Units
Frequency is measured in cycles per second (), while period is measured in seconds per cycle ().
Always check your units: if your calculated period has units of or your frequency has units of , flip numerator and denominator.
- Audible Range Test
Human hearing spans to ; frequencies below are infrasonic and those above are ultrasonic.
Compare the correctly computed frequency directly against the and boundaries.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the frequency: .
Compute the period: .
Evaluate audibility: , so the wave produces an audible pitch.
Period (), Frequency , and the tone is audible.
03 The student misapplies the metric prefix for micro, converting seconds to microseconds by multiplying by 10³ instead of 10⁶.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You multiplied by instead of . The metric prefix micro () represents , meaning (multiplying by converts seconds to milliseconds, ).
- Step 4
- Step 5
WHAT YOU DID WELL
Compliments from Your TeacherYou converted minutes to seconds without issue.
You accurately calculated the period in seconds and the frequency in both hertz and kilohertz.
You stated the correct human hearing limits and properly classified the pitch as audible.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the prefix micro () with milli (), applying a conversion factor of instead of when converting from base seconds.
REASONING PATH
Your ACEpath teacher’s suggested approach- Metric Prefixes: Milli vs. Micro
; .
Always verify the exponent associated with the prefix: 'milli' is thousandths (), while 'micro' is millionths (). Multiply seconds by to obtain microseconds.
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the conversion factor :
(or )
Lock it in
What SI unit is equivalent to , and what unit of time must be used to calculate it?
(one cycle per second). You must always measure time in seconds, never in minutes.
Similar question
A sound source completes vibrations in . Calculate the frequency in hertz () and determine whether the sound is infrasonic, audible, or ultrasonic.
Answer
(Audible). Key step: convert time to seconds, . Then , which falls in the audible range ().
A medical ultrasound transducer emits wave cycles in . Calculate the period of the wave in microseconds () and its frequency in megahertz ().
Answer
, . Key step: . Frequency . Period .
An acoustic sensor detects an unknown wave where the time period of one complete cycle is . If the source emits continuously for , determine the total number of oscillation cycles and classify the wave as audible or ultrasonic.
Answer
, Ultrasonic (). Key steps: ; ; . Frequency , so it is ultrasonic.