Resources

A block of mass m=0.450 kgm = 0.450\text{ kg} rests on a frictionless horizontal floor and is attached to a horizontal ideal spring with spring constant k=180 N/mk = 180\text{ N/m}. The opposite end of the spring is anchored to a rigid wall. The block is pulled a distance of x0=0.120 mx_0 = 0.120\text{ m} from its equilibrium position (x=0x = 0) along the positive xx-axis and released from rest at time t=0t = 0. Calculate (a) the period TT of the oscillations, (b) the maximum speed vmaxv_{\text{max}} of the block, and (c) the total mechanical energy EE of the mass-spring system.

Answer and steps

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) vmax=2.40 m/sv_{\text{max}} = 2.40\text{ m/s}; (c) E=1.30 JE = 1.30\text{ J}

Steps

Part (a): Period of Oscillation

A horizontal ideal mass-spring system executes simple harmonic motion (SHM). The angular frequency ω\omega of the system is determined by the spring constant kk and the mass mm:

ω=km\omega = \sqrt{\frac{k}{m}}

Substitute the given values k=180 N/mk = 180\text{ N/m} and m=0.450 kgm = 0.450\text{ kg}:

ω=1800.450=400=20 rad/s\omega = \sqrt{\frac{180}{0.450}} = \sqrt{400} = 20\text{ rad/s}

The period TT is the time required for one complete oscillation, given by:

T=2πω=2π20=π10 s≈0.314 sT = \frac{2\pi}{\omega} = \frac{2\pi}{20} = \frac{\pi}{10}\text{ s} \approx 0.314\text{ s}


Part (b): Maximum Speed of the Block

Because the block is pulled to x0=0.120 mx_0 = 0.120\text{ m} and released from rest, the initial displacement corresponds to the amplitude of oscillation:

A=x0=0.120 mA = x_0 = 0.120\text{ m}

In simple harmonic motion, the position varies as x(t)=Acos⁡(ωt)x(t) = A\cos(\omega t) and the velocity varies as v(t)=−Aωsin⁡(ωt)v(t) = -A\omega\sin(\omega t). The maximum speed occurs as the block passes through the equilibrium position (x=0x = 0), where all potential energy has converted into kinetic energy:

vmax=ωAv_{\text{max}} = \omega A

Substitute the values for ω\omega and AA:

vmax=(20 rad/s)⋅(0.120 m)=2.40 m/sv_{\text{max}} = (20\text{ rad/s}) \cdot (0.120\text{ m}) = 2.40\text{ m/s}


Part (c): Total Mechanical Energy

In an ideal mass-spring system on a frictionless floor, mechanical energy is conserved and is equal to the maximum elastic potential energy stored in the spring at maximum displacement (x=Ax = A):

E=12kA2E = \frac{1}{2}kA^2

Substitute k=180 N/mk = 180\text{ N/m} and A=0.120 mA = 0.120\text{ m}:

E=12(180 N/m)(0.120 m)2=90⋅0.0144 J=1.296 J≈1.30 JE = \frac{1}{2}(180\text{ N/m})(0.120\text{ m})^2 = 90 \cdot 0.0144\text{ J} = 1.296\text{ J} \approx 1.30\text{ J}

(Alternative check using maximum kinetic energy): E=12mvmax2=12(0.450 kg)(2.40 m/s)2=0.225⋅5.76 J=1.296 J≈1.30 JE = \frac{1}{2}mv_{\text{max}}^2 = \frac{1}{2}(0.450\text{ kg})(2.40\text{ m/s})^2 = 0.225 \cdot 5.76\text{ J} = 1.296\text{ J} \approx 1.30\text{ J}

Both approaches confirm the total mechanical energy of the oscillator.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio inside the square root for the period formula, using k/m instead of m/k.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πkm  ⟹  T=2π1800.450=2π400  ⟹  T=2π(20)=40π s≈126 sT = 2\pi\sqrt{\frac{k}{m}} \implies T = 2\pi\sqrt{\frac{180}{0.450}} = 2\pi\sqrt{400} \implies T = 2\pi(20) = 40\pi\text{ s} \approx 126\text{ s}

    Correct

    T=2πω=2πmk=2π0.450 kg180 N/m=π10 s≈0.314 sT = \frac{2\pi}{\omega} = 2\pi\sqrt{\frac{m}{k}} = 2\pi\sqrt{\frac{0.450\text{ kg}}{180\text{ N/m}}} = \frac{\pi}{10}\text{ s} \approx 0.314\text{ s}

    You inverted the fraction inside the radical. Since angular frequency is ω=km\omega = \sqrt{\frac{k}{m}} and period is T=2πωT = \frac{2\pi}{\omega}, dividing by ω\omega inverts the fraction to give T=2πmkT = 2\pi\sqrt{\frac{m}{k}}.

  2. Step 2

    ω=km=1800.450=20 rad/s  ⟹  vmax=ωx0=20×0.120=2.40 m/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{180}{0.450}} = 20\text{ rad/s} \implies v_{\text{max}} = \omega x_0 = 20 \times 0.120 = 2.40\text{ m/s}

  3. Step 3

    E=12kx02=12(180)(0.120)2=1.30 JE = \frac{1}{2}kx_0^2 = \frac{1}{2}(180)(0.120)^2 = 1.30\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and evaluated the angular frequency formula ω=k/m\omega = \sqrt{k/m}.

You recognized that releasing the block from rest at x0x_0 makes x0x_0 the amplitude of oscillation.

You accurately computed the maximum velocity using vmax=ωAv_{\text{max}} = \omega A.

You correctly calculated the total mechanical energy using E=12kA2E = \frac{1}{2}kA^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Mass-Spring Period Formula

Writing T=2πk/mT = 2\pi\sqrt{k/m} instead of T=2πm/kT = 2\pi\sqrt{m/k}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the expressions for angular frequency ω\omega and oscillation period TT, forgetting that period is inversely proportional to angular frequency (T=2π/ωT = 2\pi / \omega).

REASONING PATH
Your ACEpath teacher’s suggested approach
Period vs. Frequency Inversion
  • Period TT has units of seconds and measures time per cycle, so it is related to ω\omega by T=2πωT = \frac{2\pi}{\omega}.

  • Always write down ω=km\omega = \sqrt{\frac{k}{m}} first, then divide 2π2\pi by ω\omega so the fraction inside the square root clearly flips to mk\frac{m}{k}.

Physical Reality / Extreme Limits Check
  • A stiffer spring (larger kk) pulls harder and makes the system oscillate faster, which must shorten the period TT. A heavier mass (larger mm) has more inertia and makes the system oscillate slower, which must lengthen the period TT.

  • Verify that mm is in the numerator and kk is in the denominator of the period formula: as k→∞k \to \infty, T→0T \to 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the relationship between period and angular frequency: T=2πωT = \frac{2\pi}{\omega}.

  2. Substitute ω=20 rad/s\omega = 20\text{ rad/s} into the definition of period: T=2π20 rad/s=π10 sT = \frac{2\pi}{20\text{ rad/s}} = \frac{\pi}{10}\text{ s}.

  3. Evaluate numerically: T≈0.314 sT \approx 0.314\text{ s}.

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) vmax=2.40 m/sv_{\text{max}} = 2.40\text{ m/s}; (c) E=1.30 JE = 1.30\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a physical sanity check on units and limiting behavior: check if a larger mass increases the oscillation period as expected.

  • Practice deriving TT directly from T=2πωT = \frac{2\pi}{\omega} to prevent swapping mm and kk inside the radical.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the amplitude when calculating total mechanical energy with E = (1/2)kx.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πmk=2π0.450180=2π(0.050)=0.314 sT = 2\pi \sqrt{\frac{m}{k}} = 2\pi \sqrt{\frac{0.450}{180}} = 2\pi(0.050) = 0.314\text{ s}

  2. Step 2

    ω=km=20 rad/s  ⟹  vmax=ωx0=20×0.120=2.40 m/s\omega = \sqrt{\frac{k}{m}} = 20\text{ rad/s} \implies v_{\text{max}} = \omega x_0 = 20 \times 0.120 = 2.40\text{ m/s}

  3. Step 3

    E=12kx0  ⟹  E=12(180)(0.120)  ⟹  E=90×0.120=10.8 JE = \frac{1}{2}kx_0 \implies E = \frac{1}{2}(180)(0.120) \implies E = 90 \times 0.120 = 10.8\text{ J}

    Correct

    E=12kx02=12(180 N/m)(0.120 m)2=90×0.0144 J≈1.30 JE = \frac{1}{2}kx_0^2 = \frac{1}{2}(180\text{ N/m})(0.120\text{ m})^2 = 90 \times 0.0144\text{ J} \approx 1.30\text{ J}

    You omitted the exponent 22 on displacement when writing the elastic potential energy expression. The total mechanical energy in simple harmonic motion is proportional to the square of the amplitude, E=12kA2E = \frac{1}{2}kA^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the period formula T=2πm/kT = 2\pi\sqrt{m/k} for a mass-spring oscillator.

You related maximum velocity to angular frequency and amplitude via vmax=ωAv_{\text{max}} = \omega A with correct arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted exponent in energy formula

You wrote 12kx0\frac{1}{2}kx_0 rather than 12kx02\frac{1}{2}kx_0^2 when evaluating the mechanical energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the linear displacement dependence in Hooke's law force (F=kxF = kx) with the quadratic displacement dependence in elastic potential energy (U=12kx2U = \frac{1}{2}kx^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Energy Dimensions
  • Energy has units of joules (N⋅m\text{N}\cdot\text{m}), which requires multiplying force (kxkx, in N\text{N}) by distance (xx, in m\text{m}).

  • Always verify that the displacement is squared in E=12kx2E = \frac{1}{2}kx^2 so the units work out to N/m×m2=N⋅m=J\text{N/m} \times \text{m}^2 = \text{N}\cdot\text{m} = \text{J}.

Cross-Check with Kinetic Energy
  • By conservation of energy, the total energy also equals maximum kinetic energy: E=12mvmax2E = \frac{1}{2}mv_{\text{max}}^2.

  • Compute 12mvmax2=12(0.450)(2.40)2=1.30 J\frac{1}{2}mv_{\text{max}}^2 = \frac{1}{2}(0.450)(2.40)^2 = 1.30\text{ J} to check your potential energy calculation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. E=12kx02E = \frac{1}{2}k x_0^2

  2. E=12(180 N/m)(0.120 m)2E = \frac{1}{2}(180\text{ N/m})(0.120\text{ m})^2

  3. E=90×0.0144 J=1.296 J≈1.30 JE = 90 \times 0.0144\text{ J} = 1.296\text{ J} \approx 1.30\text{ J}

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) vmax=2.40 m/sv_{\text{max}} = 2.40\text{ m/s}; (c) E=1.30 JE = 1.30\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of work done by a variable spring force: ∫0Akx dx=12kA2\int_0^A kx\,dx = \frac{1}{2}kA^2.

  • Practice dimensional checks on kinematic and dynamic formulas before writing your final unit.

  • Whenever you calculate vmaxv_{\text{max}} first, use E=12mvmax2E = \frac{1}{2}mv_{\text{max}}^2 as a quick independent check.

OverviewACEpath Teacher's Diagnosis

03 The student confuses angular frequency with linear frequency and mistakenly writes v_max = f x_0 instead of ω x_0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T=2πmk=2π0.450180=0.314 sT = 2\pi\sqrt{\frac{m}{k}} = 2\pi\sqrt{\frac{0.450}{180}} = 0.314\text{ s}

  2. Step 2

    f=1T=10.314≈3.18 Hzf = \frac{1}{T} = \frac{1}{0.314} \approx 3.18\text{ Hz}

  3. Step 3

    vmax=fx0⟹vmax=3.18×0.120=0.382 m/sv_{\text{max}} = f x_0 \Longrightarrow v_{\text{max}} = 3.18 \times 0.120 = 0.382\text{ m/s}

    Correct

    vmax=ωx0=2πfx0=(20 rad/s)(0.120 m)=2.40 m/sv_{\text{max}} = \omega x_0 = 2\pi f x_0 = (20\text{ rad/s})(0.120\text{ m}) = 2.40\text{ m/s}

    You used linear frequency ff instead of angular frequency ω\omega. In simple harmonic motion, maximum speed is given by vmax=ωA=2πfAv_{\text{max}} = \omega A = 2\pi f A, which differs by a factor of 2π2\pi.

  4. Step 4

    E=12kx02=12(180)(0.120)2=1.30 JE = \frac{1}{2}kx_0^2 = \frac{1}{2}(180)(0.120)^2 = 1.30\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the oscillation period TT using T=2πm/kT = 2\pi\sqrt{m/k}.

You correctly evaluated the total mechanical energy E=12kx02E = \frac{1}{2}kx_0^2 from the initial amplitude.

You accurately related period and linear frequency using f=1/Tf = 1/T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Angular Frequency with Linear Frequency

You substituted linear frequency ff into the maximum velocity relation rather than angular frequency ω\omega.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating ordinary frequency ff (measured in Hz\text{Hz} or cycles/s\text{cycles/s}) with angular frequency ω\omega (measured in rad/s\text{rad/s}). While v=fλv = f\lambda holds for propagating waves, the kinematic amplitude relationship in simple harmonic motion is vmax=ωAv_{\text{max}} = \omega A, where ω=2πf\omega = 2\pi f.

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear vs. Angular Frequency
  • ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}

  • Check your units: if using frequency in Hz\text{Hz}, multiply by 2π2\pi to get rad/s\text{rad/s} before using harmonic motion kinematic formulas like vmax=ωAv_{\text{max}} = \omega A and amax=ω2Aa_{\text{max}} = \omega^2 A.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the angular frequency: ω=2πf=2π(3.183 Hz)=20.0 rad/s\omega = 2\pi f = 2\pi(3.183\text{ Hz}) = 20.0\text{ rad/s} (or directly via ω=k/m=180/0.450=20.0 rad/s\omega = \sqrt{k/m} = \sqrt{180/0.450} = 20.0\text{ rad/s}).

  2. Apply the maximum speed formula: vmax=ωx0=(20.0 rad/s)(0.120 m)=2.40 m/sv_{\text{max}} = \omega x_0 = (20.0\text{ rad/s})(0.120\text{ m}) = 2.40\text{ m/s}.

Final answer

(a) T=0.314 sT = 0.314\text{ s}; (b) vmax=2.40 m/sv_{\text{max}} = 2.40\text{ m/s}; (c) E=1.30 JE = 1.30\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the fundamental relation ω=2πf=k/m\omega = 2\pi f = \sqrt{k/m} at the beginning of SHM problems to avoid swapping ff and ω\omega.

  • Verify maximum velocity using energy conservation: 12mvmax2=E  ⟹  vmax=2E/m\frac{1}{2}mv_{\text{max}}^2 = E \implies v_{\text{max}} = \sqrt{2E/m}.

Lock it in

Similar question

01

A 0.250 kg0.250\text{ kg} glider on an air track is attached to a spring with k=100 N/mk = 100\text{ N/m}. Calculate its angular frequency ω\omega and its oscillation period TT.

Answer

ω=km=1000.250=20 rad/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{100}{0.250}} = 20\text{ rad/s}; T=2πω=2π20=π10 s≈0.314 sT = \frac{2\pi}{\omega} = \frac{2\pi}{20} = \frac{\pi}{10}\text{ s} \approx 0.314\text{ s}.

02

A mass-spring oscillator has a period of T=0.50 sT = 0.50\text{ s}. If the attached mass is m=0.20 kgm = 0.20\text{ kg}, find the spring constant kk and the frequency ff.

Answer

f=1T=2.0 Hzf = \frac{1}{T} = 2.0\text{ Hz}; ω=2πf=4π rad/s\omega = 2\pi f = 4\pi\text{ rad/s}. Since k=mω2k = m\omega^2, k=0.20 kg×(4π)2=3.2π2 N/m≈31.6 N/mk = 0.20\text{ kg} \times (4\pi)^2 = 3.2\pi^2\text{ N/m} \approx 31.6\text{ N/m}.

03

A horizontal oscillator consists of a 0.500 kg0.500\text{ kg} block and a spring with k=200 N/mk = 200\text{ N/m}. The block is pulled to x0=0.150 mx_0 = 0.150\text{ m} and released from rest. Find (a) the period TT, (b) the block's speed when it is at x=0.090 mx = 0.090\text{ m}, and (c) the total mechanical energy.

Answer

(a) ω=2000.500=20 rad/s\omega = \sqrt{\frac{200}{0.500}} = 20\text{ rad/s}, so T=2π20≈0.314 s.T = \frac{2\pi}{20} \approx 0.314\text{ s}. (b) Conservation of energy: v=ωA2−x2=200.1502−0.0902=20(0.120)=2.40 m/s.v = \omega\sqrt{A^2 - x^2} = 20\sqrt{0.150^2 - 0.090^2} = 20(0.120) = 2.40\text{ m/s}. (c) E=12kA2=12(200)(0.150)2=2.25 J.E = \frac{1}{2}kA^2 = \frac{1}{2}(200)(0.150)^2 = 2.25\text{ J}.

Loading workspace…