Resources
A water-pumping turbine is driven by a motor with a maximum continuous output power of . The pump draws water (density ) from an underground reservoir and discharges it at ground level through a vertical pipe of height into an open irrigation canal at a discharge speed of . If internal viscous losses consume of the supplied motor power, determine the maximum volumetric flow rate (in ) of water that the pump can sustain without exceeding its rated power limit. (Use .)
Answer and steps
Final answer
Steps
Relate the Motor Power to Useful Hydraulic Power
The motor delivers a maximum continuous power of .
Because internal viscous losses consume of this power, the efficiency of the pump system is:
The net power transferred to the water as mechanical energy is:
Determine the Specific Energy Transferred to the Water
As a parcel of water moves from rest in the underground reservoir to the discharge outlet at ground level, it gains both gravitational potential energy and kinetic energy.
The mechanical energy gained per unit mass () is:
Substitute the given values:
Calculate the Volumetric Flow Rate
The hydraulic power given to the fluid can be expressed in terms of the mass flow rate and volumetric flow rate :
Solving for the maximum volumetric flow rate :
Substitute the numerical values:
Convert this flow rate from cubic meters per second to liters per second ():
Pitfall to avoid: Remember to include the kinetic energy of the discharged water (). Neglecting the kinetic energy term would overestimate the maximum flow rate.
Typical errors
01 The student neglects the kinetic energy of the discharged water and assumes all useful power is converted into gravitational potential energy, resulting in an overestimated flow rate.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You assumed all useful power goes solely into lifting the water against gravity. Because the water exits at , the pump must also supply kinetic energy at a rate of .
- Step 3Correct
Your algebraic solving and unit conversion were executed correctly, but the numerical answer is inflated due to omitting the kinetic energy term in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the net hydraulic power by subtracting internal losses from the motor rating.
You accurately converted units from cubic meters per second to liters per second.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the hydrostatic lifting formula without including the kinetic energy per unit volume carried away by the discharged water.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Mechanical Energy Gains
For fluid moving from a large reservoir at rest to an exit nozzle, total specific energy change is .
Always list both the elevation change and the exit velocity before writing the hydraulic power expression.
- Hydraulic Power Equation
Ensure that both potential and kinetic terms are summed before setting them equal to useful pump power.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the total specific energy delivered to each kilogram of water: .
Relate net fluid power to volumetric flow rate: .
Solve for flow rate: .
Convert to liters per second: .
02 The student misinterprets the 18.0% loss as an efficiency factor of 18.0% instead of subtracting it from 100%, causing a significant underestimation of the flow rate.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The problem states that viscous losses consume of the supplied power, meaning the remaining is delivered to the water as useful hydraulic power.
- Step 2
- Step 3Correct
Your formula and algebraic solution for are mathematically sound, but this step inherits the incorrect useful power from Step 1.
- Step 4Correct
Your unit conversion from cubic meters per second to liters per second was executed properly, but the numerical value was skewed by the earlier power calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly accounted for both gravitational potential energy and kinetic energy per unit mass.
You correctly related fluid power to density, volumetric flow rate, and specific mechanical energy ().
You converted units from cubic meters per second to liters per second accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the given loss percentage as the pump's efficiency () rather than subtracting the losses from the total input to find the useful power fraction ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Useful Power from Percentage Loss
If internal losses consume a fraction of the input power , the useful output power is .
Always verify whether a given percentage represents useful output (efficiency) or wasted energy (losses) before multiplying by total power.
CORRECTED PATH
ACEpath Teacher's Demonstration03 The student forgets to square the discharge speed in the kinetic energy term, calculating specific kinetic energy as (1/2)v instead of (1/2)v².
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Specific kinetic energy is , not . Omitting the exponent underestimates the energy required per unit mass of water.
- Step 3Correct
Your relationship between power, density, and specific energy is completely correct, but the calculation inherits the incorrect value of .
- Step 4Correct
Your unit conversion from to is accurate, but the final numerical value is slightly too high because of the missing squared term in step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly accounted for the efficiency loss to determine the net fluid power.
You correctly related volumetric flow rate to mass flow rate and fluid power using .
You accurately converted cubic meters per second into liters per second.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote instead of when calculating the specific kinetic energy.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInattention to dimensional consistency in kinetic energy formulas: writing rather than yields units of velocity instead of specific energy .
REASONING PATH
Your ACEpath teacher’s suggested approach- Specific Kinetic Energy
Kinetic energy per unit mass is .
Always check that the velocity term is squared so that units match .
- Dimensional Verification
In mechanical energy expressions , both terms must have identical units of .
Verify that matches .
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate specific energy with : .
Solve for maximum flow rate: .
Convert to liters per second: .
Lock it in
What is the general expression for the total mechanical power delivered to an incompressible liquid discharging into the atmosphere from a resting reservoir?
. The pump must supply both gravitational potential energy to lift the fluid and kinetic energy to discharge it at speed .
Similar question
A drainage pump delivers water (density ) from a sump to street level through a vertical height of . The water is expelled into an open gutter at a speed of . If the pump transfers a net mechanical power of directly to the water, what is the volumetric flow rate in ? (Take .)
Answer
. Specific energy is . Then .
A fountain nozzle shoots water vertically into the air from ground level at an exit velocity of with a volumetric flow rate of . The pump motor operates with an efficiency of . Assuming the water enters the pump at ground level essentially at rest, calculate the required electrical input power to the motor in kilowatts. (Density of water .)
Answer
. Mass flow rate is . Specific kinetic energy gained is . Net hydraulic power is . Input power is .
A deep-well submersible pump draws water from an underground water table at a depth of below ground level and delivers it into an elevated pressurized tank located above ground. The water exits the discharge pipe into the tank at , and the tank air cushion maintains a gauge pressure of . If the pump motor supplies of mechanical power to the water, calculate the maximum sustaining flow rate in . (Take and .)
Answer
. Total elevation change is . The specific energy gained includes elevation, pressure, and kinetic terms: . Flow rate is .