Resources

Two point-source speakers are separated by d=3.60 md = 3.60\text{ m} along the xx-axis at x=−1.80 mx = -1.80\text{ m} and x=+1.80 mx = +1.80\text{ m}. They emit identical sinusoidal sound waves of wavelength λ=0.800 m\lambda = 0.800\text{ m}, but speaker 1 leads speaker 2 in phase by an initial phase difference of Δϕ0=ϕ1−ϕ2=+π radians\Delta \phi_0 = \phi_1 - \phi_2 = +\pi\text{ radians} (i.e., they are driven in antiphase). A microphone is placed at point PP on the xx-axis at x=+0.600 mx = +0.600\text{ m} between the two speakers. Taking into account both the path-length difference and the initial emitter phase offset, state whether the acoustic interference at point PP is constructive or destructive, and calculate the net phase difference ΔΦ\Delta \Phi between the two arriving waves.

Answer and steps

Final answer

ΔΦ=4.00π radians\Delta \Phi = 4.00\pi\text{ radians} (12.6 rad12.6\text{ rad}); the interference is fully constructive.

Steps

01

Determine the path lengths from each speaker to the microphone

Let the position of Speaker 1 be x1=−1.80 mx_1 = -1.80\text{ m}, Speaker 2 be x2=+1.80 mx_2 = +1.80\text{ m}, and the microphone at point PP be xP=+0.600 mx_P = +0.600\text{ m}.

The distance r1r_1 traveled by the sound wave from Speaker 1 to point PP is: r1=∣xP−x1∣=∣0.600 m−(−1.80 m)∣=2.40 mr_1 = |x_P - x_1| = |0.600\text{ m} - (-1.80\text{ m})| = 2.40\text{ m}

The distance r2r_2 traveled by the sound wave from Speaker 2 to point PP is: r2=∣xP−x2∣=∣0.600 m−1.80 m∣=1.20 mr_2 = |x_P - x_2| = |0.600\text{ m} - 1.80\text{ m}| = 1.20\text{ m}

The path-length difference Δr\Delta r between the two sound waves is: Δr=r1−r2=2.40 m−1.20 m=1.20 m\Delta r = r_1 - r_2 = 2.40\text{ m} - 1.20\text{ m} = 1.20\text{ m}


02

Calculate the phase shift due to the path-length difference

The wave number kk is given by: k=2πλ=2π0.800 m=2.50π rad/mk = \frac{2\pi}{\lambda} = \frac{2\pi}{0.800\text{ m}} = 2.50\pi\text{ rad/m}

The phase difference resulting purely from the difference in travel distance is: Δϕpath=kΔr=2πλΔr=2π0.800 m⋅1.20 m=3.00π radians\Delta \phi_{\text{path}} = k \Delta r = \frac{2\pi}{\lambda}\Delta r = \frac{2\pi}{0.800\text{ m}} \cdot 1.20\text{ m} = 3.00\pi\text{ radians}


03

Compute the net phase difference at point PP

The net phase difference ΔΦ\Delta \Phi of the two waves arriving at point PP accounts for both the initial phase offset between the sources and the phase change accumulated along their paths: ΔΦ=Δϕpath+Δϕ0=3.00π rad+π rad=4.00π radians\Delta \Phi = \Delta \phi_{\text{path}} + \Delta \phi_0 = 3.00\pi\text{ rad} + \pi\text{ rad} = 4.00\pi\text{ radians}

In decimal form: ΔΦ=4.00π≈12.6 rad\Delta \Phi = 4.00\pi \approx 12.6\text{ rad}


04

Determine the type of acoustic interference

For any two interfering sinusoidal waves of the same frequency:

  • Constructive interference occurs when the net phase difference is an even multiple of π\pi: ΔΦ=2mπ(m∈Z)\Delta \Phi = 2m\pi \quad (m \in \mathbb{Z})
  • Destructive interference occurs when the net phase difference is an odd multiple of π\pi: ΔΦ=(2m+1)π(m∈Z)\Delta \Phi = (2m + 1)\pi \quad (m \in \mathbb{Z})

Because ΔΦ=4.00π=2(2)π\Delta \Phi = 4.00\pi = 2(2)\pi corresponds to an even integer multiple (m=2m = 2), the two sound waves arrive exactly in phase, producing fully constructive interference.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the initial emitter phase difference Δϕ0 = π and concludes the interference is destructive based solely on the path-length difference being an odd half-integer multiple of wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r1=0.600−(−1.80)=2.40 m  ⟹  r2=1.80−0.600=1.20 m  ⟹  Δr=2.40−1.20=1.20 mr_1 = 0.600 - (-1.80) = 2.40\text{ m} \implies r_2 = 1.80 - 0.600 = 1.20\text{ m} \implies \Delta r = 2.40 - 1.20 = 1.20\text{ m}

  2. Step 2

    Δϕ=(2π/0.800)∗1.20=3π radians\Delta \phi = (2\pi / 0.800) * 1.20 = 3\pi\text{ radians}

  3. Step 3

    Destructive interference.

    Correct

    ΔΦ=Δϕpath+Δϕ0=3.00π rad+π rad=4.00π rad  ⟹  Constructive interference\Delta \Phi = \Delta \phi_{\text{path}} + \Delta \phi_0 = 3.00\pi\text{ rad} + \pi\text{ rad} = 4.00\pi\text{ rad} \implies \text{Constructive interference}

    You classified the interference based only on the path phase difference Δϕpath=3π rad\Delta \phi_{\text{path}} = 3\pi\text{ rad}, overlooking the intrinsic emitter phase offset Δϕ0=+π rad\Delta \phi_0 = +\pi\text{ rad}. The net phase difference is ΔΦ=3.00π+π=4.00π rad\Delta \Phi = 3.00\pi + \pi = 4.00\pi\text{ rad}, which is an even multiple of π\pi and corresponds to constructive interference.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found the distances from both sources to the microphone.

You calculated the path-length difference accurately as Δr=1.20 m\Delta r = 1.20\text{ m}.

You correctly related spatial separation to wave phase shift using Δϕ=2πλΔr\Delta \phi = \frac{2\pi}{\lambda}\Delta r.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Initial Source Phase Difference

You stopped after calculating the spatial phase difference Δϕpath=3π rad\Delta \phi_{\text{path}} = 3\pi\text{ rad} and classified the interference without incorporating the initial phase offset given in the problem statement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating interference criteria as depending solely on the spatial path difference Δr\Delta r (or Δϕpath\Delta \phi_{\text{path}}), forgetting that non-identical or out-of-phase sources require adding the intrinsic emitter phase offset: ΔΦ=2πλΔr+Δϕ0\Delta \Phi = \frac{2\pi}{\lambda}\Delta r + \Delta \phi_0.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check source coherence and initial phase
  • Interference depends on the net phase difference ΔΦ=kΔr+Δϕ0\Delta \Phi = k\Delta r + \Delta \phi_0.

  • Always verify whether the problem states that the sources emit in phase (Δϕ0=0\Delta \phi_0 = 0) or out of phase (Δϕ0≠0\Delta \phi_0 \neq 0) before deciding whether an integer or half-integer wavelength difference produces constructive interference.

Evaluate total phase difference for interference condition
  • Constructive interference occurs when ΔΦ=2mπ\Delta \Phi = 2m\pi, and destructive occurs when ΔΦ=(2m+1)π\Delta \Phi = (2m+1)\pi for m∈Zm \in \mathbb{Z}.

  • Sum all phase contributions into ΔΦ\Delta \Phi first, and only then compare the resulting total phase angle to even or odd multiples of π\pi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the given initial phase offset between the sources: Δϕ0=ϕ1−ϕ2=+π rad\Delta \phi_0 = \phi_1 - \phi_2 = +\pi\text{ rad}.

  2. Combine the path contribution and source offset: ΔΦ=Δϕpath+Δϕ0=3.00π rad+π rad=4.00π rad\Delta \Phi = \Delta \phi_{\text{path}} + \Delta \phi_0 = 3.00\pi\text{ rad} + \pi\text{ rad} = 4.00\pi\text{ rad}.

  3. Compare ΔΦ=4.00π=2(2)π\Delta \Phi = 4.00\pi = 2(2)\pi to the standard interference condition: an even multiple of π\pi indicates that the waves arrive exactly in phase.

Final answer

ΔΦ=4.00π radians\Delta \Phi = 4.00\pi\text{ radians} (12.6 rad12.6\text{ rad}); constructive interference.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review wave interference with non-zero initial phase offsets.

  • Practice problems where sources are driven in antiphase (Δϕ0=π\Delta \phi_0 = \pi) to reinforce that Δr=(m+12)λ\Delta r = (m + \frac{1}{2})\lambda leads to constructive interference in that specific case.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the factor of 2π when converting path-length difference to a phase angle, adding Δr / λ directly to the initial phase offset.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r1=2.40 m,r2=1.20 m  ⟹  Δr=2.40−1.20=1.20 mr_1 = 2.40\text{ m},\quad r_2 = 1.20\text{ m} \implies \Delta r = 2.40 - 1.20 = 1.20\text{ m}

  2. Step 2

    Δrλ=1.200.800=1.5  ⟹  ΔΦ=π+1.5=4.64 radians\frac{\Delta r}{\lambda} = \frac{1.20}{0.800} = 1.5 \implies \Delta \Phi = \pi + 1.5 = 4.64\text{ radians}

    Correct

    Δϕpath=2πλΔr=2π(1.5)=3.00π rad  ⟹  ΔΦ=3.00π+π=4.00π radians\Delta \phi_{\text{path}} = \frac{2\pi}{\lambda}\Delta r = 2\pi(1.5) = 3.00\pi\text{ rad} \implies \Delta \Phi = 3.00\pi + \pi = 4.00\pi\text{ radians}

    The quantity Δrλ=1.5\frac{\Delta r}{\lambda} = 1.5 represents the path difference in cycles, not radians. To convert to radians, you must multiply by 2π2\pi, giving Δϕpath=2π×1.5=3π rad\Delta \phi_{\text{path}} = 2\pi \times 1.5 = 3\pi\text{ rad}, so ΔΦ=3π+π=4π rad\Delta \Phi = 3\pi + \pi = 4\pi\text{ rad}.

  3. Step 3

    Destructive interference\text{Destructive interference}

    Correct

    Constructive interference\text{Constructive interference}

    Because the total phase difference is ΔΦ=4.00π rad=2(2)π\Delta \Phi = 4.00\pi\text{ rad} = 2(2)\pi, which is an even integer multiple of π\pi, the two waves arrive completely in phase, producing constructive interference.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the distances r1r_1 and r2r_2 from each speaker to the microphone.

You correctly found the path-length difference Δr=1.20 m\Delta r = 1.20\text{ m} and evaluated the ratio Δrλ=1.5\frac{\Delta r}{\lambda} = 1.5.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of 2π factor in phase conversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the ratio of path difference to wavelength Δrλ\frac{\Delta r}{\lambda} as if it were already an angle in radians, rather than converting cycles to radians by multiplying by 2π2\pi.

REASONING PATH
Your ACEpath teacher’s suggested approach
Path Phase Formula
  • Δϕpath=k Δr=2πλΔr=2π(Δrλ)\Delta \phi_{\text{path}} = k\,\Delta r = \frac{2\pi}{\lambda}\Delta r = 2\pi\left(\frac{\Delta r}{\lambda}\right)

  • Always multiply the fractional wavelength difference Δrλ\frac{\Delta r}{\lambda} by 2π2\pi to obtain the phase shift in radians before adding it to an initial phase angle.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the cycle difference to a phase angle in radians: Δϕpath=2π(Δrλ)=2π(1.5)=3.00π rad\Delta \phi_{\text{path}} = 2\pi \left(\frac{\Delta r}{\lambda}\right) = 2\pi (1.5) = 3.00\pi\text{ rad}.

  2. Add the initial phase difference between the sources: ΔΦ=Δϕpath+Δϕ0=3.00π+π=4.00π radians\Delta \Phi = \Delta \phi_{\text{path}} + \Delta \phi_0 = 3.00\pi + \pi = 4.00\pi\text{ radians}.

  3. Classify the interference: since ΔΦ=4.00π=2(2)π\Delta \Phi = 4.00\pi = 2(2)\pi is an even multiple of π\pi, the waves interfere constructively.

Final answer

ΔΦ=4.00π radians\Delta \Phi = 4.00\pi\text{ radians} (12.6 rad12.6\text{ rad}); constructive interference.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting path differences Δr\Delta r directly into phase angles using Δϕ=2πλΔr\Delta \phi = \frac{2\pi}{\lambda}\Delta r.

  • Combine source phase offset and path phase shift before applying the condition for constructive (2mπ2m\pi) or destructive ((2m+1)π(2m+1)\pi) interference.

OverviewACEpath Teacher's Diagnosis

03 The student uses the standard in-phase condition where an odd-integer multiple of π corresponds to destructive interference, misinterpreting the net phase difference of 4π as destructive due to confusing 4π with (2m+1)π.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r1=2.40 m, r2=1.20 m  ⟹  Δr=2.40−1.20=1.20 mr_1 = 2.40\text{ m},\, r_2 = 1.20\text{ m} \implies \Delta r = 2.40 - 1.20 = 1.20\text{ m}

  2. Step 2

    Δϕpath=2π0.800⋅1.20=3π radians\Delta \phi_{\text{path}} = \frac{2\pi}{0.800} \cdot 1.20 = 3\pi\text{ radians}

  3. Step 3

    Δϕ=3π+π=4π radians\Delta \phi = 3\pi + \pi = 4\pi\text{ radians}

  4. Step 4

    Since Δϕ\Delta \phi is a multiple of π\pi, interference is destructive.   ⟹  \implies Destructive interference.

    Correct

    ΔΦ=4π=2(2)π\Delta \Phi = 4\pi = 2(2)\pi is an even multiple of π\pi, so the interference is fully constructive.

    Any even integer multiple of π\pi (2mπ2m\pi) means the two waves arrive completely in phase, producing constructive interference. Destructive interference requires an odd integer multiple of π\pi ((2m+1)π(2m+1)\pi).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the individual distances from each speaker to the microphone.

You converted the path-length difference to a spatial phase difference using the wavenumber.

You added the initial phase offset of π\pi to find the correct net phase difference of 4π rad4\pi\text{ rad}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interference phase condition confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You generalized the destructive interference condition to 'any multiple of π\pi' rather than specifically 'an odd multiple of π\pi'. Because 4π4\pi is an even multiple of π\pi (equivalent to 0(mod2π)0\pmod{2\pi}), the wave crests align and constructively reinforce.

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Phase Difference Condition
  • Constructive interference occurs when ΔΦ=2mπ\Delta \Phi = 2m\pi (even multiples of π\pi). Destructive interference occurs when ΔΦ=(2m+1)π\Delta \Phi = (2m+1)\pi (odd multiples of π\pi).

  • Always factor ΔΦ\Delta \Phi by π\pi and check whether the coefficient is even (constructive) or odd (destructive).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the parity of the integer multiplying π\pi in the net phase difference: ΔΦ=4π=2(2)π\Delta \Phi = 4\pi = 2(2)\pi.

  2. Since the factor is an even integer (m=2m = 2), the two waves are shifted by exactly two full wave cycles (2λ2\lambda).

  3. Conclude that the two arriving sinusoidal waves are exactly in phase at point PP.

Final answer

ΔΦ=4.00π radians\Delta \Phi = 4.00\pi\text{ radians} (12.6 rad12.6\text{ rad}); the interference is fully constructive.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the general interference criteria expressed in total phase angle ΔΦ\Delta \Phi versus path difference Δr\Delta r.

  • Practice identifying constructive vs. destructive interference when emitters have non-zero initial phase offsets.

Lock it in

Similar question

01

Two sound sources with wavelength λ=1.20 m\lambda = 1.20\text{ m} emit waves with an initial phase difference of Δϕ0=π rad\Delta \phi_0 = \pi\text{ rad}. A detector is placed where the distance from source 1 is 4.80 m4.80\text{ m} and from source 2 is 3.60 m3.60\text{ m}. Calculate the net phase difference ΔΦ\Delta \Phi and identify the type of interference.

Answer

Δr=4.80 m−3.60 m=1.20 m=1.00λ\Delta r = 4.80\text{ m} - 3.60\text{ m} = 1.20\text{ m} = 1.00\lambda. Path phase shift Δϕpath=2π1.20(1.20)=2π rad\Delta \phi_{\text{path}} = \frac{2\pi}{1.20}(1.20) = 2\pi\text{ rad}. Net phase difference ΔΦ=2π+π=3π rad\Delta \Phi = 2\pi + \pi = 3\pi\text{ rad}. Since ΔΦ\Delta \Phi is an odd multiple of π\pi, the interference is fully destructive.

02

Two speakers emit identical tones of frequency f=680 m/sf = 680\text{ m/s} (speed of sound v=340 m/sv = 340\text{ m/s}, so λ=0.500 m\lambda = 0.500\text{ m}). Speaker 1 leads speaker 2 by Δϕ0=π/2 rad\Delta \phi_0 = \pi/2\text{ rad}. If a microphone is placed such that Δr=r1−r2=0.125 m\Delta r = r_1 - r_2 = 0.125\text{ m}, find the net phase difference ΔΦ\Delta \Phi and determine if the interference is fully constructive, fully destructive, or intermediate.

Answer

Wavelength λ=0.500 m\lambda = 0.500\text{ m}. Path phase difference Δϕpath=2π0.500 m(0.125 m)=π2 rad\Delta \phi_{\text{path}} = \frac{2\pi}{0.500\text{ m}}(0.125\text{ m}) = \frac{\pi}{2}\text{ rad}. Total phase difference ΔΦ=π2+π2=π rad\Delta \Phi = \frac{\pi}{2} + \frac{\pi}{2} = \pi\text{ rad}. Since ΔΦ=π\Delta \Phi = \pi, the interference is fully destructive.

03

Two radio antennas separated by distance DD emit waves of wavelength λ\lambda with an initial phase difference Δϕ0\Delta \phi_0. Derive the condition on the path difference Δr\Delta r that produces constructive interference at a receiver in terms of m∈Zm \in \mathbb{Z}, λ\lambda, and Δϕ0\Delta \phi_0.

Answer

Constructive interference requires ΔΦ=2πλΔr+Δϕ0=2mπ\Delta \Phi = \frac{2\pi}{\lambda}\Delta r + \Delta \phi_0 = 2m\pi. Solving for Δr\Delta r gives Δr=(m−Δϕ02π)λ\Delta r = \left(m - \frac{\Delta \phi_0}{2\pi}\right)\lambda. (When Δϕ0=π\Delta \phi_0 = \pi, this simplifies to Δr=(m−1/2)λ\Delta r = (m - 1/2)\lambda, turning half-integer wavelength differences into constructive locations).

Loading workspace…