Resources

In an undergraduate physics laboratory experiment, a vertical spark timer apparatus measures the position of a freely falling weighted cylinder. The spark generator fires at a constant frequency of f=60.0 Hzf = 60.0\text{ Hz}, producing spark marks on sensitized paper tape every τ=160.0 s=0.01667 s\tau = \frac{1}{60.0}\text{ s} = 0.01667\text{ s}. The tape records two consecutive intervals: the displacement between spark marks nn and n+1n+1 is measured as Δy1=3.25 cm\Delta y_1 = 3.25\text{ cm}, and the displacement between spark marks n+1n+1 and n+2n+2 is measured as Δy2=3.52 cm\Delta y_2 = 3.52\text{ cm}. From these experimental data: (a) calculate the experimental value of the acceleration due to gravity gexpg_{\text{exp}}, and (b) determine the percent error relative to the accepted local value of g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2; (b) Percent Error=0.816%\text{Percent Error} = 0.816\%

Steps

Part (a): Calculating the Experimental Acceleration gexpg_{\text{exp}}

For an object undergoing uniform downward acceleration gg, the position as a function of time is given by:

y(t)=y0+v0t+12gt2y(t) = y_0 + v_0 t + \frac{1}{2}g t^2

Consider the motion across two consecutive, equal time intervals of duration τ=1f=160.0 s\tau = \frac{1}{f} = \frac{1}{60.0}\text{ s}:

  1. Over the first interval from t=0t = 0 to t=τt = \tau: Δy1=v0τ+12gτ2\Delta y_1 = v_0 \tau + \frac{1}{2}g \tau^2
  2. Over the second interval from t=τt = \tau to t=2τt = 2\tau, the cylinder starts with velocity v1=v0+gτv_1 = v_0 + g\tau: Δy2=v1τ+12gτ2=(v0+gτ)τ+12gτ2=v0τ+32gτ2\Delta y_2 = v_1 \tau + \frac{1}{2}g \tau^2 = (v_0 + g\tau)\tau + \frac{1}{2}g \tau^2 = v_0 \tau + \frac{3}{2}g \tau^2

Subtracting the first interval displacement from the second gives the second difference of position:

Δy2−Δy1=gτ2\Delta y_2 - \Delta y_1 = g \tau^2

Solving for the experimental acceleration gexpg_{\text{exp}}:

gexp=Δy2−Δy1τ2=(Δy2−Δy1)f2g_{\text{exp}} = \frac{\Delta y_2 - \Delta y_1}{\tau^2} = (\Delta y_2 - \Delta y_1) f^2

(Alternatively, this can be understood through average velocities: the average velocity during an interval equals the instantaneous velocity at the midpoint of that interval. The midpoints of two consecutive intervals of duration τ\tau are separated by exactly Δt=τ\Delta t = \tau, yielding g=vavg,2−vavg,1τ=Δy2−Δy1τ2g = \frac{v_{\text{avg}, 2} - v_{\text{avg}, 1}}{\tau} = \frac{\Delta y_2 - \Delta y_1}{\tau^2}.)

Convert the given displacements to standard SI units:

  • Δy1=3.25 cm=0.0325 m\Delta y_1 = 3.25\text{ cm} = 0.0325\text{ m}
  • Δy2=3.52 cm=0.0352 m\Delta y_2 = 3.52\text{ cm} = 0.0352\text{ m}

Calculate the displacement difference: Δy2−Δy1=0.0352 m−0.0325 m=0.0027 m\Delta y_2 - \Delta y_1 = 0.0352\text{ m} - 0.0325\text{ m} = 0.0027\text{ m}

Substitute τ=160.0 s\tau = \frac{1}{60.0}\text{ s} (or f=60.0 Hzf = 60.0\text{ Hz}):

gexp=(0.0027 m)⋅(60.0 s−1)2=0.0027⋅3600=9.72 m/s2g_{\text{exp}} = (0.0027\text{ m}) \cdot (60.0\text{ s}^{-1})^2 = 0.0027 \cdot 3600 = 9.72\text{ m/s}^2


Part (b): Determining the Percent Error

The percent error relative to the accepted value g=9.80 m/s2g = 9.80\text{ m/s}^2 is:

Percent Error=∣gexp−g∣g×100%\text{Percent Error} = \frac{|g_{\text{exp}} - g|}{g} \times 100\%

Substitute the values:

Percent Error=∣9.72 m/s2−9.80 m/s2∣9.80 m/s2×100%=0.089.80×100%≈0.816%\text{Percent Error} = \frac{|9.72\text{ m/s}^2 - 9.80\text{ m/s}^2|}{9.80\text{ m/s}^2} \times 100\% = \frac{0.08}{9.80} \times 100\% \approx 0.816\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the time interval τ in the denominator when calculating acceleration from the change in displacement, resulting in units of velocity instead of acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δy=3.52 cm−3.25 cm=0.27 cm=0.0027 m\Delta y = 3.52\text{ cm} - 3.25\text{ cm} = 0.27\text{ cm} = 0.0027\text{ m}

  2. Step 2

    gexp=Δyτ  ⟹  gexp=0.0027(160)  ⟹  gexp=0.162 m/s2g_{\text{exp}} = \frac{\Delta y}{\tau} \implies g_{\text{exp}} = \frac{0.0027}{\left(\frac{1}{60}\right)} \implies g_{\text{exp}} = 0.162\text{ m/s}^2

    Correct

    gexp=Δy2−Δy1τ2=0.0027 m(160 s)2=9.72 m/s2g_{\text{exp}} = \frac{\Delta y_2 - \Delta y_1}{\tau^2} = \frac{0.0027\text{ m}}{\left(\frac{1}{60}\text{ s}\right)^2} = 9.72\text{ m/s}^2

    You divided the position change difference by τ\tau instead of τ2\tau^2. Since Δy2−Δy1=gτ2\Delta y_2 - \Delta y_1 = g\tau^2, the experimental acceleration is gexp=Δy2−Δy1τ2=(0.0027)(60)2=9.72 m/s2g_{\text{exp}} = \frac{\Delta y_2 - \Delta y_1}{\tau^2} = (0.0027)(60)^2 = 9.72\text{ m/s}^2.

  3. Step 3

    Percent error\text{Percent error} = ∣0.162−9.80∣9.80\frac{|0.162 - 9.80|}{9.80} ×\times 100%   ⟹  \implies 9.6389.80\frac{9.638}{9.80} ×\times 100% = 98.3%

    Correct

    Percent error\text{Percent error} = ∣9.72−9.80∣9.80\frac{|9.72 - 9.80|}{9.80} ×\times 100% ≈\approx 0.816%

    You applied the percent error formula correctly, but the result was thrown off by the incorrect acceleration value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the second difference of position Δy=0.0027 m\Delta y = 0.0027\text{ m}.

You properly converted units from centimeters to meters.

You set up and evaluated the percent error formula accurately using your calculated acceleration value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Formulation Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You divided the second difference of displacement by τ\tau rather than τ2\tau^2. The quantity Δy2−Δy1τ\frac{\Delta y_2 - \Delta y_1}{\tau} represents the change in average velocity Δv\Delta v between intervals, so dividing it once more by Δt=τ\Delta t = \tau is necessary to obtain acceleration in m/s2\text{m/s}^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency of Second Differences
  • In uniformly accelerated motion, position differences satisfy Δy2−Δy1=aτ2\Delta y_2 - \Delta y_1 = a\tau^2, so a=Δy2−Δy1τ2a = \frac{\Delta y_2 - \Delta y_1}{\tau^2}.

  • Always verify units: dividing a distance (m\text{m}) by a single time interval (s\text{s}) gives velocity (m/s\text{m/s}), so you must divide by τ2\tau^2 (or multiply by f2f^2) to obtain acceleration in m/s2\text{m/s}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the acceleration formula from consecutive intervals: gexp=Δy2−Δy1τ2=(Δy2−Δy1)f2g_{\text{exp}} = \frac{\Delta y_2 - \Delta y_1}{\tau^2} = (\Delta y_2 - \Delta y_1) f^2.

  2. Substitute the values: gexp=(0.0027 m)(60.0 s−1)2=0.0027×3600=9.72 m/s2g_{\text{exp}} = (0.0027\text{ m})(60.0\text{ s}^{-1})^2 = 0.0027 \times 3600 = 9.72\text{ m/s}^2.

  3. Recompute the percent error: Percent error=∣9.72−9.80∣9.80×100%=0.089.80×100%≈0.816%\text{Percent error} = \frac{|9.72 - 9.80|}{9.80} \times 100\% = \frac{0.08}{9.80} \times 100\% \approx 0.816\%.

Final answer

(a) gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2; (b) Percent Error=0.816%\text{Percent Error} = 0.816\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving the second difference formula Δy2−Δy1=aτ2\Delta y_2 - \Delta y_1 = a\tau^2 from the kinematic equation Δy=v0t+12at2\Delta y = v_0 t + \frac{1}{2}at^2.

  • Use dimensional analysis as a quick sanity check whenever calculating kinematic quantities to ensure your denominator carries the correct power of time.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the time elapsed between the two velocity midpoints is 2τ instead of τ, dividing by 2τ² and halving the acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=0.03251/60=1.95 m/s  ⟹  v2=0.03521/60=2.112 m/sv_1 = \frac{0.0325}{1/60} = 1.95\text{ m/s} \implies v_2 = \frac{0.0352}{1/60} = 2.112\text{ m/s}

  2. Step 2

    Δt=2τ=260 s\Delta t = 2\tau = \frac{2}{60}\text{ s}

    Correct

    Δt=τ=160 s\Delta t = \tau = \frac{1}{60}\text{ s}

    Under uniform acceleration, the average velocity across an interval equals the instantaneous velocity at the exact midpoint of that interval. The midpoint of the first interval is at t=0.5τt = 0.5\tau and the midpoint of the second is at t=1.5τt = 1.5\tau, so the elapsed time between them is 1.5τ−0.5τ=τ=160 s1.5\tau - 0.5\tau = \tau = \frac{1}{60}\text{ s}, not 2τ2\tau.

  3. Step 3

    gexp=2.112−1.952/60=0.1622/60=4.86 m/s2g_{\text{exp}} = \frac{2.112 - 1.95}{2/60} = \frac{0.162}{2/60} = 4.86\text{ m/s}^2

    Correct

    gexp=2.112 m/s−1.95 m/s1/60 s=9.72 m/s2g_{\text{exp}} = \frac{2.112\text{ m/s} - 1.95\text{ m/s}}{1/60\text{ s}} = 9.72\text{ m/s}^2

    You correctly carried out the arithmetic with your chosen time interval, but because Δt\Delta t was doubled, the resulting acceleration was halved.

  4. Step 4

    Percent error\text{Percent error} = ∣4.86−9.80∣9.80\frac{|4.86 - 9.80|}{9.80} ×\times 100% = 4.949.80\frac{4.94}{9.80} ×\times 100% = 50.4%

    Correct

    Percent error\text{Percent error} = ∣9.72−9.80∣9.80\frac{|9.72 - 9.80|}{9.80} ×\times 100% ≈\approx 0.816%

    You applied the percent error formula correctly to your value of gexpg_{\text{exp}}, but the result was skewed by the earlier acceleration error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted centimeters to meters for both measured displacements.

You accurately computed the average velocities for both intervals.

You correctly applied the standard formula for percent error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Midpoint Time Separation Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the time difference between the two computed average velocities is the total duration of both intervals (2τ2\tau), rather than recognizing that an average velocity represents the instantaneous velocity at the temporal midpoint of each interval, which are separated by only τ\tau.

REASONING PATH
Your ACEpath teacher’s suggested approach
Midpoint Theorem for Uniform Acceleration
  • For constant acceleration, vavg=v(tmid)v_{\text{avg}} = v(t_{\text{mid}}), where tmidt_{\text{mid}} is the midpoint of the interval.

  • Identify the midpoints t1=t0+0.5τt_1 = t_0 + 0.5\tau and t2=t0+1.5τt_2 = t_0 + 1.5\tau, giving an elapsed time of Δt=t2−t1=τ\Delta t = t_2 - t_1 = \tau.

Second-Difference Position Method
  • For consecutive intervals of duration τ\tau, Δy2−Δy1=gτ2\Delta y_2 - \Delta y_1 = g\tau^2.

  • Directly compute g=Δy2−Δy1τ2g = \frac{\Delta y_2 - \Delta y_1}{\tau^2} to avoid confusing the time separation between intervals.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the time elapsed between the velocity midpoints: Δt=1.5τ−0.5τ=τ=160.0 s\Delta t = 1.5\tau - 0.5\tau = \tau = \frac{1}{60.0}\text{ s}.

  2. Calculate the experimental acceleration: gexp=v2−v1τ=2.112 m/s−1.950 m/s1/60.0 s=0.162×60.0=9.72 m/s2g_{\text{exp}} = \frac{v_2 - v_1}{\tau} = \frac{2.112\text{ m/s} - 1.950\text{ m/s}}{1/60.0\text{ s}} = 0.162 \times 60.0 = 9.72\text{ m/s}^2.

  3. Compute the percent error: Percent Error=∣9.72 m/s2−9.80 m/s2∣9.80 m/s2×100%=0.089.80×100%≈0.816%\text{Percent Error} = \frac{|9.72\text{ m/s}^2 - 9.80\text{ m/s}^2|}{9.80\text{ m/s}^2} \times 100\% = \frac{0.08}{9.80} \times 100\% \approx 0.816\%.

Final answer

(a) gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2; (b) Percent Error=0.816%\text{Percent Error} = 0.816\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why the average velocity of an interval with uniform acceleration equals the instantaneous velocity at the midpoint of that interval.

  • Practice calculating acceleration across consecutive ticker-tape or spark-timer intervals using the second-difference identity Δy2−Δy1=aτ2\Delta y_2 - \Delta y_1 = a\tau^2.

OverviewACEpath Teacher's Diagnosis

03 The student calculates percent error relative to the experimental value rather than the accepted theoretical value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δy2−Δy1=3.52 cm−3.25 cm=0.27 cm=0.0027 m  ⟹  τ=160 s  ⟹  gexp=Δy2−Δy1τ2=0.0027×3600=9.72 m/s2\Delta y_2 - \Delta y_1 = 3.52\text{ cm} - 3.25\text{ cm} = 0.27\text{ cm} = 0.0027\text{ m} \implies \tau = \frac{1}{60}\text{ s} \implies g_{\text{exp}} = \frac{\Delta y_2 - \Delta y_1}{\tau^2} = 0.0027 \times 3600 = 9.72\text{ m/s}^2

  2. Step 2

    Percent error\text{Percent error} = ∣gexp−g∣gexp\frac{|g_{\text{exp}} - g|}{g_{\text{exp}}} ×\times 100% = ∣9.72−9.80∣9.72\frac{|9.72 - 9.80|}{9.72} ×\times 100% = 0.089.72\frac{0.08}{9.72} ×\times 100% = 0.823%

    Correct

    Percent error\text{Percent error} = ∣gexp−g∣g\frac{|g_{\text{exp}} - g|}{g} ×\times 100% = ∣9.72−9.80∣9.80\frac{|9.72 - 9.80|}{9.80} ×\times 100% ≈\approx 0.816%

    You divided by the measured experimental value gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2 instead of the true accepted standard g=9.80 m/s2g = 9.80\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the second difference of consecutive displacements over equal time intervals to find acceleration.

You converted centimeters to standard SI meters before computing gexpg_{\text{exp}}.

You calculated the absolute difference between experimental and accepted values accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Percent error denominator confusion

Using gexpg_{\text{exp}} in the denominator instead of the accepted standard gg.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Percent error quantifies deviation relative to the established standard or accepted truth, so the denominator must always be the accepted (theoretical) value, not the experimental measurement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Percent Error Base Reference
  • Percent Error=∣Experimental−Accepted∣Accepted×100%\text{Percent Error} = \frac{|\text{Experimental} - \text{Accepted}|}{\text{Accepted}} \times 100\%

  • Always place the true/accepted reference standard in the denominator, never your measured result.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard percent error formula: Percent Error=∣gexp−gaccepted∣gaccepted×100%\text{Percent Error} = \frac{|g_{\text{exp}} - g_{\text{accepted}}|}{g_{\text{accepted}}} \times 100\%.

  2. Substitute gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2 and gaccepted=9.80 m/s2g_{\text{accepted}} = 9.80\text{ m/s}^2: Percent Error=∣9.72−9.80∣9.80×100%\text{Percent Error} = \frac{|9.72 - 9.80|}{9.80} \times 100\%.

  3. Evaluate the fraction: 0.089.80×100%≈0.816%\frac{0.08}{9.80} \times 100\% \approx 0.816\%.

Final answer

(a) gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2; (b) Percent Error=0.816%\text{Percent Error} = 0.816\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the definition of percent error as error relative to the accepted standard.

  • Double-check every error calculation to verify whether the denominator is an accepted value (percent error) or an average of two measurements (percent difference).

Lock it in

Similar question

01

A ticker timer operating at 50.0 Hz50.0\text{ Hz} produces marks on a tape attached to a falling cart. Two consecutive intervals each spanning 0.0200 s0.0200\text{ s} measure Δx1=4.10 cm\Delta x_1 = 4.10\text{ cm} and Δx2=4.49 cm\Delta x_2 = 4.49\text{ cm}. Calculate the experimental acceleration aexpa_{\text{exp}} of the cart.

Answer

9.75 m/s29.75\text{ m/s}^2. Key steps: Δx2−Δx1=4.49 cm−4.10 cm=0.39 cm=0.0039 m\Delta x_2 - \Delta x_1 = 4.49\text{ cm} - 4.10\text{ cm} = 0.39\text{ cm} = 0.0039\text{ m}. Using a=Δx2−Δx1τ2=(0.0039 m)(50.0 s−1)2=9.75 m/s2a = \frac{\Delta x_2 - \Delta x_1}{\tau^2} = (0.0039\text{ m})(50.0\text{ s}^{-1})^2 = 9.75\text{ m/s}^2.

02

In a free-fall spark timer experiment at f=60.0 Hzf = 60.0\text{ Hz}, consecutive spark intervals measure Δy1=1.84 cm\Delta y_1 = 1.84\text{ cm} and Δy2=2.11 cm\Delta y_2 = 2.11\text{ cm}. Find the experimental acceleration and its percent discrepancy from the accepted value g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

gexp=9.72 m/s2g_{\text{exp}} = 9.72\text{ m/s}^2, discrepancy is 0.82%0.82\%. Key steps: Δy2−Δy1=0.27 cm=0.0027 m\Delta y_2 - \Delta y_1 = 0.27\text{ cm} = 0.0027\text{ m}. Acceleration gexp=0.0027×602=9.72 m/s2g_{\text{exp}} = 0.0027 \times 60^2 = 9.72\text{ m/s}^2. Percent error =∣9.72−9.80∣9.80×100%≈0.816%≈0.82%= \frac{|9.72 - 9.80|}{9.80} \times 100\% \approx 0.816\% \approx 0.82\%.

03

A photogate timer records a glider accelerating down an inclined air track. A picket fence with opaque bands spaced d=2.50 cmd = 2.50\text{ cm} apart passes through the photogate. The time between band 1 and band 2 is Δt1=0.0500 s\Delta t_1 = 0.0500\text{ s}, and between band 2 and band 3 is Δt2=0.0400 s\Delta t_2 = 0.0400\text{ s}. Find the average acceleration of the glider between these two intervals.

Answer

2.78 m/s22.78\text{ m/s}^2. Key steps: Midpoint velocities are v1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s} and v2=0.0250 m0.0400 s=0.625 m/sv_2 = \frac{0.0250\text{ m}}{0.0400\text{ s}} = 0.625\text{ m/s}. The time elapsed between interval midpoints is Δt=Δt1+Δt22=0.0450 s\Delta t = \frac{\Delta t_1 + \Delta t_2}{2} = 0.0450\text{ s}. Acceleration a=v2−v1Δt=0.125 m/s0.0450 s≈2.78 m/s2a = \frac{v_2 - v_1}{\Delta t} = \frac{0.125\text{ m/s}}{0.0450\text{ s}} \approx 2.78\text{ m/s}^2.

Loading workspace…