Resources

In a university physics laboratory experiment, an ultrasonic motion detector mounted at the end of a track records the position of an oscillating glider attached to a spring. The detector face defines the coordinate origin x=0 mx = 0\text{ m}, and the track extends along the positive xx-axis. At time t0=0.00 st_0 = 0.00\text{ s}, the glider is released from rest at an initial release position x0=0.850 mx_0 = 0.850\text{ m}. The sonar system records position-time data: at t1=0.400 st_1 = 0.400\text{ s}, the glider reaches its closest approach of x1=0.350 mx_1 = 0.350\text{ m}; at t2=0.800 st_2 = 0.800\text{ s}, it returns to x2=0.850 mx_2 = 0.850\text{ m}; and at t3=1.200 st_3 = 1.200\text{ s}, it reaches x3=0.350 mx_3 = 0.350\text{ m} where data collection ends. For the full experimental run from t0=0.00 st_0 = 0.00\text{ s} to t3=1.200 st_3 = 1.200\text{ s}: (a) determine the glider's final position x3x_3, (b) calculate the net displacement Δx\Delta x, and (c) compute the total cumulative distance dd logged by the ultrasonic tracking system.

Answer and steps

Final answer

(a) Final position: x3=0.350 mx_3 = 0.350\text{ m}; (b) Net displacement: Δx=−0.500 m\Delta x = -0.500\text{ m}; (c) Total cumulative distance: d=1.50 md = 1.50\text{ m}.

Steps

01

Final Position

Position describes the glider's precise location along the coordinate axis relative to the origin (x=0 mx = 0\text{ m}, defined by the detector face) at a given time.

At the end of the data collection interval (t3=1.200 st_3 = 1.200\text{ s}), the coordinate is directly given by the sonar system: x3=0.350 mx_3 = 0.350\text{ m}


02

Net Displacement

Displacement (Δx\Delta x) is a vector quantity defined as the straight-line change in position between the initial state and the final state, regardless of the path taken: Δx=xfinal−xinitial=x3−x0\Delta x = x_{\text{final}} - x_{\text{initial}} = x_3 - x_0

Substitute the recorded values: Δx=0.350 m−0.850 m=−0.500 m\Delta x = 0.350\text{ m} - 0.850\text{ m} = -0.500\text{ m}

Interpretation: The negative sign indicates that the glider's net change in position is oriented in the negative xx-direction (toward the motion sensor).


03

Total Cumulative Distance

Distance (dd) is a scalar quantity representing the total length of the path traveled. Because the glider reverses direction, the total distance is the sum of the absolute values of the displacements for each individual segment:

  • Segment 1 (t0→t1t_0 \to t_1): glider moves from x0=0.850 mx_0 = 0.850\text{ m} to x1=0.350 mx_1 = 0.350\text{ m} d1=∣x1−x0∣=∣0.350 m−0.850 m∣=0.500 md_1 = |x_1 - x_0| = |0.350\text{ m} - 0.850\text{ m}| = 0.500\text{ m}
  • Segment 2 (t1→t2t_1 \to t_2): glider moves from x1=0.350 mx_1 = 0.350\text{ m} to x2=0.850 mx_2 = 0.850\text{ m} d2=∣x2−x1∣=∣0.850 m−0.350 m∣=0.500 md_2 = |x_2 - x_1| = |0.850\text{ m} - 0.350\text{ m}| = 0.500\text{ m}
  • Segment 3 (t2→t3t_2 \to t_3): glider moves from x2=0.850 mx_2 = 0.850\text{ m} to x3=0.350 mx_3 = 0.350\text{ m} d3=∣x3−x2∣=∣0.350 m−0.850 m∣=0.500 md_3 = |x_3 - x_2| = |0.350\text{ m} - 0.850\text{ m}| = 0.500\text{ m}

Summing the lengths of all three segments gives the total cumulative distance: d=d1+d2+d3=0.500 m+0.500 m+0.500 m=1.50 md = d_1 + d_2 + d_3 = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.50\text{ m}


Key Takeaway and Common Pitfall

  • Displacement depends only on the endpoints (x0x_0 and x3x_3) and carries a sign indicating direction: Δx=−0.500 m\Delta x = -0.500\text{ m}.
  • Distance accumulates every unit of travel and can never be negative: d=1.50 md = 1.50\text{ m}.
  • A common mistake is equating total distance to the magnitude of displacement (∣Δx∣|\Delta x|), which is only valid if the object never reverses direction.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student reverses the order of subtraction when calculating displacement, defining it as initial position minus final position.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x3=0.350 mx_3 = 0.350\text{ m}

  2. Step 2

    Δx=x0−x3  ⟹  Δx=0.850 m−0.350 m=0.500 m\Delta x = x_0 - x_3 \implies \Delta x = 0.850\text{ m} - 0.350\text{ m} = 0.500\text{ m}

    Correct

    Δx=x3−x0=0.350 m−0.850 m=−0.500 m\Delta x = x_3 - x_0 = 0.350\text{ m} - 0.850\text{ m} = -0.500\text{ m}

    Displacement is defined as the change in position, Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}. Subtracting initial from final yields 0.350 m−0.850 m=−0.500 m0.350\text{ m} - 0.850\text{ m} = -0.500\text{ m}, indicating net movement in the negative xx-direction.

  3. Step 3

    d=∣0.350 m−0.850 m∣+∣0.850 m−0.350 m∣+∣0.350 m−0.850 m∣  ⟹  d=0.500 m+0.500 m+0.500 m=1.500 md = |0.350\text{ m} - 0.850\text{ m}| + |0.850\text{ m} - 0.350\text{ m}| + |0.350\text{ m} - 0.850\text{ m}| \implies d = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.500\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the final position from the given coordinate data.

You correctly computed the total cumulative distance by taking the sum of the absolute displacements for each turnaround segment.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed displacement formula

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined displacement as initial position minus final position (x0−x3x_0 - x_3) instead of final position minus initial position (x3−x0x_3 - x_0), which reverses the vector's direction and changes its sign.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Delta (Change)
  • In physics and mathematics, Δ\Delta always denotes final−initial\text{final} - \text{initial}.

  • Always set up Δx=xf−xi\Delta x = x_f - x_i before substituting coordinate values.

Sign Check for Displacement
  • A negative displacement signifies net motion toward the coordinate origin or in the negative axis direction.

  • Compare the initial coordinate (0.850 m0.850\text{ m}) and final coordinate (0.350 m0.350\text{ m}); since the object ended closer to the origin, Δx\Delta x must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard displacement formula: Δx=x3−x0\Delta x = x_3 - x_0.

  2. Substitute the values: Δx=0.350 m−0.850 m\Delta x = 0.350\text{ m} - 0.850\text{ m}.

  3. Evaluate the difference: Δx=−0.500 m\Delta x = -0.500\text{ m}.

Final answer

(a) x3=0.350 mx_3 = 0.350\text{ m}; (b) Δx=−0.500 m\Delta x = -0.500\text{ m}; (c) d=1.50 md = 1.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize that Δ(quantity)=final−initial\Delta (\text{quantity}) = \text{final} - \text{initial} across all physics topics.

  • Practice checking whether the sign of your displacement vector matches the physical direction of net motion on the coordinate axis.

OverviewACEpath Teacher's Diagnosis

02 The student confuses cumulative distance with the magnitude of net displacement.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x3=0.350 mx_3 = 0.350\text{ m}

  2. Step 2

    Δx=x3−x0  ⟹  Δx=0.350 m−0.850 m=−0.500 m\Delta x = x_3 - x_0 \implies \Delta x = 0.350\text{ m} - 0.850\text{ m} = -0.500\text{ m}

  3. Step 3

    d=∣Δx∣  ⟹  d=∣−0.500 m∣=0.500 md = |\Delta x| \implies d = |-0.500\text{ m}| = 0.500\text{ m}

    Correct

    d=∣x1−x0∣+∣x2−x1∣+∣x3−x2∣=0.500 m+0.500 m+0.500 m=1.50 md = |x_1 - x_0| + |x_2 - x_1| + |x_3 - x_2| = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.50\text{ m}

    You set total distance equal to the absolute value of net displacement. Because the glider reverses direction twice during the run, you must sum the path length of each individual segment.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the final position coordinate directly from the sonar position data.

You applied the vector definition of displacement accurately, retaining the negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating distance to displacement magnitude

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that total distance traveled is equal to the magnitude of net displacement (d=∣Δx∣d = |\Delta x|). This relationship holds only when an object moves strictly in one direction without reversing.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for reversals of motion
  • Displacement depends only on endpoints (xf−xix_f - x_i), but distance accumulates every segment traveled: d=∑∣Δxk∣d = \sum |\Delta x_k|.

  • Break the motion into segments between each turning point, take the absolute value of displacement for each segment, and sum them.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the individual travel intervals between turning points: x0→x1x_0 \to x_1, x1→x2x_1 \to x_2, and x2→x3x_2 \to x_3.

  2. Calculate the distance traveled in each segment: d1=∣0.350 m−0.850 m∣=0.500 md_1 = |0.350\text{ m} - 0.850\text{ m}| = 0.500\text{ m}, d2=∣0.850 m−0.350 m∣=0.500 md_2 = |0.850\text{ m} - 0.350\text{ m}| = 0.500\text{ m}, and d3=∣0.350 m−0.850 m∣=0.500 md_3 = |0.350\text{ m} - 0.850\text{ m}| = 0.500\text{ m}.

  3. Add the segment distances together: d=d1+d2+d3=0.500 m+0.500 m+0.500 m=1.50 md = d_1 + d_2 + d_3 = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.50\text{ m}.

Final answer

d=1.50 md = 1.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching position-time paths with directional arrows along a 1D axis to visualize path length versus net shift.

  • Whenever an object changes direction, compute path lengths segment-by-segment using absolute values.

OverviewACEpath Teacher's Diagnosis

03 The student only accounts for one full oscillation cycle and omits the final half-cycle segment when calculating distance.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    x3=0.350 mx_3 = 0.350\text{ m}

  2. Step 2

    Δx=x3−x0  ⟹  Δx=0.350 m−0.850 m=−0.500 m\Delta x = x_3 - x_0 \implies \Delta x = 0.350\text{ m} - 0.850\text{ m} = -0.500\text{ m}

  3. Step 3

    d=∣x1−x0∣+∣x2−x1∣  ⟹  d=0.500 m+0.500 m=1.000 md = |x_1 - x_0| + |x_2 - x_1| \implies d = 0.500\text{ m} + 0.500\text{ m} = 1.000\text{ m}

    Correct

    d=∣x1−x0∣+∣x2−x1∣+∣x3−x2∣=0.500 m+0.500 m+0.500 m=1.50 md = |x_1 - x_0| + |x_2 - x_1| + |x_3 - x_2| = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.50\text{ m}

    You accurately found the distance traveled across the first two intervals, but data collection ended at t3=1.200 st_3 = 1.200\text{ s}. You omitted the third motion segment from x2x_2 to x3x_3, which added another 0.500 m0.500\text{ m} of travel.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly read the glider's final coordinate from the experimental data.

You applied the vector definition of displacement using initial and final endpoints.

You recognized that total distance requires summing the absolute values of individual segments between turning points.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted motion segment in multi-interval distance calculation

You stopped calculating distance at t2=0.800 st_2 = 0.800\text{ s} instead of continuing through the full duration to t3=1.200 st_3 = 1.200\text{ s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the motion as completing after one standard round-trip period (t0→t2t_0 \to t_2) and overlooked the extra half-cycle occurring from t2t_2 to t3t_3 before data collection ended.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match time boundaries
  • Every segment between turning points from the initial timestamp t0t_0 to the specified final timestamp tfinalt_{\text{final}} must be included in the total distance sum.

  • Check that your last segment ends at the exact stopping time t3t_3 specified in the problem statement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the remaining segment from t2=0.800 st_2 = 0.800\text{ s} to t3=1.200 st_3 = 1.200\text{ s}: d3=∣x3−x2∣=∣0.350 m−0.850 m∣=0.500 md_3 = |x_3 - x_2| = |0.350\text{ m} - 0.850\text{ m}| = 0.500\text{ m}.

  2. Add all three segment lengths together: d=d1+d2+d3=0.500 m+0.500 m+0.500 m=1.50 md = d_1 + d_2 + d_3 = 0.500\text{ m} + 0.500\text{ m} + 0.500\text{ m} = 1.50\text{ m}.

Final answer

d=1.50 md = 1.50\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before adding path segments, list the coordinate pairs for every interval up to the target final time (t0→t1t_0 \to t_1, t1→t2t_1 \to t_2, and t2→t3t_2 \to t_3).

  • Count the total number of segments defined by the data timestamps to confirm no intervals are skipped.

Lock it in

Similar question

01

A toy train on a straight track starts at x=1.20 mx = 1.20\text{ m}, travels forward to x=2.00 mx = 2.00\text{ m}, and then reverses back to x=0.50 mx = 0.50\text{ m}. Find (a) its net displacement Δx\Delta x and (b) its total distance traveled dd.

Answer

(a) Δx=xf−xi=0.50 m−1.20 m=−0.70 m\Delta x = x_f - x_i = 0.50\text{ m} - 1.20\text{ m} = -0.70\text{ m}. (b) Total distance d=∣2.00−1.20∣+∣0.50−2.00∣=0.80 m+1.50 m=2.30 md = |2.00 - 1.20| + |0.50 - 2.00| = 0.80\text{ m} + 1.50\text{ m} = 2.30\text{ m}.

02

An elevator starts at floor level y=30.0 my = 30.0\text{ m}, descends to y=10.0 my = 10.0\text{ m}, ascends to y=45.0 my = 45.0\text{ m}, and finally descends to y=20.0 my = 20.0\text{ m}. Calculate the elevator's net displacement Δy\Delta y and total distance dd.

Answer

Net displacement depends only on endpoints: Δy=yf−yi=20.0 m−30.0 m=−10.0 m\Delta y = y_f - y_i = 20.0\text{ m} - 30.0\text{ m} = -10.0\text{ m}. Total distance d=∣10.0−30.0∣+∣45.0−10.0∣+∣20.0−45.0∣=20.0+35.0+25.0=80.0 md = |10.0 - 30.0| + |45.0 - 10.0| + |20.0 - 45.0| = 20.0 + 35.0 + 25.0 = 80.0\text{ m}.

03

A particle moves along the xx-axis according to the position function x(t)=t2−4t+1x(t) = t^2 - 4t + 1 (where xx is in meters and tt is in seconds) from t=0 st = 0\text{ s} to t=3 st = 3\text{ s}. Determine the particle's net displacement Δx\Delta x and total distance traveled dd.

Answer

At t=0t = 0, x(0)=1 mx(0) = 1\text{ m}. At t=3t = 3, x(3)=32−4(3)+1=−2 mx(3) = 3^2 - 4(3) + 1 = -2\text{ m}. Turning point occurs when v(t)=2t−4=0  ⟹  t=2 sv(t) = 2t - 4 = 0 \implies t = 2\text{ s}, where x(2)=22−4(2)+1=−3 mx(2) = 2^2 - 4(2) + 1 = -3\text{ m}. Net displacement: Δx=x(3)−x(0)=−2−1=−3 m\Delta x = x(3) - x(0) = -2 - 1 = -3\text{ m}. Total distance: d=∣x(2)−x(0)∣+∣x(3)−x(2)∣=∣−3−1∣+∣−2−(−3)∣=4 m+1 m=5 md = |x(2) - x(0)| + |x(3) - x(2)| = |-3 - 1| + |-2 - (-3)| = 4\text{ m} + 1\text{ m} = 5\text{ m}.

Loading workspace…