Resources
In an acoustic calibration lab, an engineering team standardizes an experimental hemispherical loudspeaker mounted on a completely rigid, acoustic-grade reflecting concrete floor (semi-infinite half-space, radiating into a solid angle of ). A Class-1 precision sound level meter is positioned at a distance of from the center of the speaker cone and records a steady level of . (a) Accounting for hemispherical propagation (), calculate the acoustic intensity at the detector. (b) Determine the total acoustic power output of the loudspeaker. (c) If the loudspeaker is lifted into an anechoic free-space chamber where it radiates isotropically in full spherical symmetry () with the same electrical power, calculate the new sound intensity level measured at the same distance .
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Acoustic Intensity at the Detector
The sound intensity level (in decibels, ) is defined relative to the standard reference threshold of hearing, :
Invert the equation to solve for the sound intensity :
Substitute the given sound level :
Part (b): Total Acoustic Power Output of the Loudspeaker
Because the loudspeaker rests on a rigid, reflecting floor, all sound radiates upward into a hemisphere of radius . The surface area of this hemisphere is:
Substitute :
The total acoustic power passing through this surface is the product of uniform intensity and area:
Part (c): Sound Intensity Level in Free Space
When the loudspeaker is elevated into free space, the same acoustic power spreads uniformly over a full sphere of solid angle rather than a hemisphere of .
- Calculate the new intensity: The surface area doubles at the same distance : Consequently, the intensity is halved:
-
Calculate the new sound intensity level: Using the logarithmic properties of decibels:
(Common Pitfall: Do not halve the decibel value directly. Because the decibel scale is logarithmic, halving the acoustic intensity corresponds to subtracting , not halving .)
Typical errors
01 The student confuses the decibel formula with a natural logarithm or forgets the factor of 10, calculating intensity using 10^(β) instead of 10^(β/10).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When solving for intensity, you must first isolate the logarithm by dividing by , giving . Exponentiating instead of results in instead of .
- Step 2Correct
Your formula for the hemispherical power and your algebraic execution were completely sound, but the result inherited the incorrect intensity value from part (a).
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly stated the definition of sound level in decibels.
You accurately identified that doubling the propagation solid angle from to halves the sound intensity.
You applied the decibel subtraction property perfectly to obtain for part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou skipped dividing by the multiplier 10 before converting from logarithmic to exponential form.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating with during inversion, leading to rather than .
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolate the Logarithm First
Always divide both sides by before applying base- exponentiation.
- Physical Sanity Check
Everyday sound sources radiate powers between milliwatts and kilowatts ( to ).
Notice if an acoustic power reaches astronomical orders of magnitude like (the Sun's total luminosity is only ).
CORRECTED PATH
ACEpath Teacher's DemonstrationDivide by :
Exponentiate with base :
Multiply by :
Recompute power:
(a) ; (b) ; (c)
02 The student uses the full sphere area 4πr² instead of the hemispherical surface area 2πr² when calculating the radiated power in part (b).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the speaker is mounted on a rigid reflecting floor, acoustic energy radiates into a semi-infinite half-space (), so the wavefront area is , not .
- Step 3Correct
You correctly recognized that free space corresponds to a full spherical radiation area of , but substituting the doubled power from part (b) canceled out the geometric reduction and left the intensity and decibel level unchanged.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the reference intensity and obtained the correct numerical intensity for part (a).
You correctly related acoustic power, intensity, and surface area through the relationship .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the full spherical area instead of the hemispherical surface area for radiation above a rigid floor.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing full-space isotropic radiation () with half-space hemispherical radiation () over a rigid reflecting plane.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Boundary Conditions and Solid Angle
Sound radiating above a rigid planar reflector is confined to a hemisphere: (). Full spherical radiation () applies only in unobstructed free space.
Always identify whether the source radiates into (free space) or (half-space over a plane) before selecting the wavefront area formula.
- Decibel Change Under Power/Area Scaling
When the radiated area doubles for the same source power, intensity is halved: .
Use the logarithmic ratio identity to quickly verify changes in decibel levels.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecalculate the hemispherical power using the correct surface area: .
For full spherical free-space radiation with the same power, intensity is halved at the same radius: .
Calculate the new sound level: .
(a) ; (b) ; (c)
03 The student subtracts the factor of 2 directly from the decibel level instead of converting the intensity ratio using 10 log₁₀(2).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
{} = 87.5 / 2 = 43.8
CorrectThe decibel scale is logarithmic, not linear. Halving the intensity subtracts from the sound level rather than dividing by .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the acoustic intensity from the given decibel level using .
You correctly computed the total emitted power across the hemispherical wavefront using .
You recognized that moving to full spherical radiation doubles the surface area and therefore halves the sound intensity.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou divided the decibel level directly by instead of subtracting .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating decibels as a linear measure of acoustic power or intensity rather than a logarithmic ratio. Because , multiplying or dividing intensity by a factor corresponds to adding or subtracting , not scaling algebraically.
REASONING PATH
Your ACEpath teacher’s suggested approach- Logarithmic Scaling Rule
Multiplying sound intensity by a factor of changes the sound level by .
Whenever intensity is scaled by a ratio, compute the shift and add it to the original decibel level.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the relationship between new and old intensity: .
Apply the decibel difference formula: .
Calculate the new sound level: .
(a) ; (b) ; (c)
Lock it in
How do you correctly invert to solve for intensity ?
. Always divide by before taking the power of .
Similar question
A sound level meter records from a small machine. Given reference intensity , determine the sound intensity .
Answer
.
A siren radiates sound uniformly into open air (full sphere, ). At a distance of , the sound level is measured to be . Find the total acoustic power emitted by the siren.
Answer
- Intensity: .
- Surface area: .
- Power: .
A speaker on a hard reflective ground produces at (hemispherical radiation). If identical acoustic power is radiated into a quarter-space corner ( solid angle) instead of a hemisphere (), what is the new sound level at the same distance ?
Answer
- Solid angle is halved from to , so surface area is halved: .
- Consequently, intensity doubles: .
- Sound level increases by : .