Resources
A sled of mass starts from rest at the top of a rough hill inclined at to the horizontal. The coefficient of kinetic friction on the slope is . The sled slides down the incline for a distance in a non-equilibrium state, after which it smoothly transitions onto a level, flat snow surface where the snow provides a constant resistive stopping force of . Using Newton's second law for the non-equilibrium acceleration combined with the work-energy theorem on the flat track, calculate the speed of the sled at the base of the incline and the subsequent stopping distance on the level track. Take .
Answer and steps
Final answer
,
Steps
Analyze Forces on the Incline (Perpendicular Direction)
Set up a coordinate system where the positive -axis points down the incline and the positive -axis is perpendicular to and directed away from the incline surface.
Since there is no motion perpendicular to the slope, the sled is in equilibrium along the -axis:
Solving for the normal force :
Substitute the given values:
The kinetic friction force opposing the motion down the slope is:
Determine Acceleration Along the Incline (Non-Equilibrium)
Along the incline (-axis), the sled accelerates under the net force resulting from the downslope component of gravity and the opposing friction force:
Calculate the component of gravity down the incline:
The net force acting down the slope is:
Applying Newton's second law gives the acceleration:
Find the Speed at the Base of the Slope
Starting from rest () and traveling a distance down the incline, apply the kinematic relation:
Common Pitfall: Forgetting to subtract kinetic friction from the downhill gravitational force, or mixing up and for the respective axes. The component pulling the object down the plane always involves when is measured from the horizontal.
Calculate the Stopping Distance on the Level Track
On the flat horizontal surface, the only horizontal force acting on the sled is the constant resistive force .
By the Work-Energy Theorem, the net work done on the sled equals its change in kinetic energy:
Solving for the stopping distance :
Substitute the values:
Typical errors
01 The student forgets that the normal force on an incline is reduced by cos(θ) and uses f_k = μ_k * m * g instead of μ_k * m * g * cos(θ).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
On an inclined plane, the normal force balances only the perpendicular component of gravity, giving . Therefore, kinetic friction is , not .
- Step 2Correct
You applied the kinematic formula correctly, but the numerical result is affected by the underestimated acceleration from Step 1.
- Step 3Correct
You correctly formulated and solved the work-energy relation on the horizontal track, but the result was propagated from the previous step's value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the component of gravity acting parallel down the incline as .
You applied the constant-acceleration kinematic formula accurately.
You correctly connected the work done by the resistive force to the sled's loss of kinetic energy using the work-energy theorem.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the normal force equal to rather than when expressing kinetic friction on the slope.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOvergeneralizing the flat-surface normal force formula to an inclined surface, neglecting that only the perpendicular component of gravity balances the normal force.
REASONING PATH
Your ACEpath teacher’s suggested approach- Perpendicular Equilibrium Check
Along the axis perpendicular to an incline of angle , acceleration is zero: .
Always write before computing friction as .
- Extreme Angle Boundary Check
As , ; as (vertical wall), .
Check whether your normal force formula properly scales to zero when the slope becomes completely vertical.
CORRECTED PATH
ACEpath Teacher's DemonstrationDetermine the normal force from perpendicular equilibrium: .
Compute the kinetic friction force on the slope: .
Find the net force and acceleration down the incline: .
Recalculate the velocity at the bottom: .
Recalculate the stopping distance using work-energy: .
,
02 The student swaps sine and cosine components on the incline, using cos(θ) for the downhill gravitational force and sin(θ) for the normal force.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
When the incline angle is measured from the horizontal, the component of gravity acting parallel to the surface (down the slope) is , while the perpendicular component balancing the normal force is .
- Step 2Correct
You correctly applied the kinematic equation , but the result was affected by the incorrect acceleration from Step 1.
- Step 3Correct
You applied the work-energy theorem correctly to model the horizontal stopping distance, but the numerical answer inherits the error in .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the work-energy theorem to relate stopping distance to initial kinetic energy on the flat track.
You correctly identified and applied the kinematic relation for constant acceleration from rest.
You correctly related normal force to kinetic friction via .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeSwapped and when resolving gravity into components parallel and perpendicular to the incline.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisidentifying the opposite and adjacent sides of the vector triangle formed by the weight vector and the inclined axes when the slope angle is defined relative to the horizontal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Component Resolution on an Incline
For an incline at angle relative to the horizontal, the component of gravity down the incline is and the perpendicular component is .
Always sketch the right triangle under the weight vector: the angle lies between the downward vertical and the perpendicular axis, making the perpendicular side adjacent () and the downhill side opposite ().
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the correct downslope component of gravity: .
Compute the normal force and friction force: .
Find the net acceleration: .
Recalculate the base velocity: .
Recalculate the stopping distance: .
,
03 The student forgets the factor of 1/2 in the kinetic energy formula when applying the work-energy theorem on the flat track.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You omitted the factor of in the initial kinetic energy. The definition of kinetic energy is , not .
- Step 4Correct
Your algebraic rearrangement and arithmetic were carried out correctly from your equation, but the numerical answer is exactly twice the true stopping distance because of the missing factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou resolved perpendicular and parallel forces on an incline accurately using trigonometry.
You used Newton's second law to find the correct non-equilibrium acceleration.
You selected and executed the correct kinematic formula to find the velocity at the bottom of the slope.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set the kinetic energy equal to rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou recalled the variable dependence of kinetic energy on mass and velocity squared (), but dropped the coefficient when translating into algebraic terms.
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition of Translational Kinetic Energy
Always write the explicit formula before substituting values or equating to work.
- Work-Energy Balance Check
Ensure the stopping relation reads , which leads directly to .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the Work-Energy Theorem: .
Substitute the work done by the flat resistive force: .
Solve for the stopping distance: .
Evaluate using the values , , and : .
,
Lock it in
What is the normal force acting on an object of mass resting or sliding on a ramp inclined at angle with no other perpendicular forces?
. The perpendicular component of gravity balances the normal force because there is no acceleration perpendicular to the ramp surface.
Similar question
A box is pulled up an incline of angle at a constant speed by a rope parallel to the slope. If the coefficient of kinetic friction is , calculate the normal force and the kinetic friction force . Take .
Answer
; .
A skier of mass glides down a hill of angle . The coefficient of kinetic friction between the skis and snow is . Calculate the skier's acceleration down the slope. Take .
Answer
.
A block of mass slides down a ramp inclined at over a distance of from rest, where . It then enters a rough horizontal patch with . Calculate its speed at the bottom of the ramp and its stopping distance on the flat patch. Take .
Answer
On the ramp: . Speed at base: . On the horizontal patch: , so deceleration is . Stopping distance: .