Resources

A package conveyor cart of mass m=45.0 kgm = 45.0\text{ kg} moves along a straight rail. Its speed-time graph shows that it accelerates uniformly from rest to 8.00 m/s8.00\text{ m/s} over the interval t=0 st = 0\text{ s} to t=4.00 st = 4.00\text{ s}, cruises at 8.00 m/s8.00\text{ m/s} until t=10.0 st = 10.0\text{ s}, and decelerates uniformly to rest at t=14.0 st = 14.0\text{ s}. Assuming a constant kinetic friction force of fk=30.0 Nf_k = 30.0\text{ N} opposes the motion throughout the entire trip, determine the total work done by the cart's motor during the initial 4.00 s4.00\text{ s} acceleration phase.

Answer and steps

Final answer

1920 J1920\text{ J}

Steps

01

Find the displacement during the acceleration phase

To find the work done by the motor during the first 4.00 s4.00\text{ s}, we determine the distance traveled and then apply either the work-energy theorem or Newton's second law.

On a speed-time graph, the displacement Δx\Delta x equals the area under the curve. Over the time interval from t=0 st = 0\text{ s} to t=4.00 st = 4.00\text{ s}, the cart accelerates uniformly from 0 m/s0\text{ m/s} to 8.00 m/s8.00\text{ m/s}, forming a right triangle:

Δx=12⋅base⋅height=12(4.00 s)(8.00 m/s)=16.0 m\Delta x = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2} (4.00\text{ s})(8.00\text{ m/s}) = 16.0\text{ m}

02

Calculate the change in kinetic energy

The cart starts from rest (vi=0 m/sv_i = 0\text{ m/s}) and reaches a final speed vf=8.00 m/sv_f = 8.00\text{ m/s}. The change in kinetic energy ΔK\Delta K is:

ΔK=12mvf2−12mvi2\Delta K = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2

ΔK=12(45.0 kg)(8.00 m/s)2−0=12(45.0)(64.0)=1440 J\Delta K = \frac{1}{2}(45.0\text{ kg})(8.00\text{ m/s})^2 - 0 = \frac{1}{2}(45.0)(64.0) = 1440\text{ J}

03

Apply the Work-Energy Theorem

According to the work-energy theorem, the net work done on the cart equals its change in kinetic energy:

Wnet=ΔKW_{\text{net}} = \Delta K

The net work consists of the work done by the driving force of the motor (WmotorW_{\text{motor}}) and the negative work done by kinetic friction (WfW_f):

Wmotor+Wf=ΔKW_{\text{motor}} + W_f = \Delta K

Because kinetic friction opposes the displacement:

Wf=−fk⋅Δx=−(30.0 N)(16.0 m)=−480 JW_f = -f_k \cdot \Delta x = -(30.0\text{ N})(16.0\text{ m}) = -480\text{ J}

Substitute WfW_f and ΔK\Delta K into the work-energy equation:

Wmotor−480 J=1440 JW_{\text{motor}} - 480\text{ J} = 1440\text{ J}

Wmotor=1440 J+480 J=1920 JW_{\text{motor}} = 1440\text{ J} + 480\text{ J} = 1920\text{ J}

(Alternative check using forces: The acceleration is a=8.00 m/s4.00 s=2.00 m/s2a = \frac{8.00\text{ m/s}}{4.00\text{ s}} = 2.00\text{ m/s}^2. From Fmotor−fk=maF_{\text{motor}} - f_k = m a, the forward force is Fmotor=(45.0 kg)(2.00 m/s2)+30.0 N=120 NF_{\text{motor}} = (45.0\text{ kg})(2.00\text{ m/s}^2) + 30.0\text{ N} = 120\text{ N}. The work done is Wmotor=Fmotor⋅Δx=120 N⋅16.0 m=1920 JW_{\text{motor}} = F_{\text{motor}} \cdot \Delta x = 120\text{ N} \cdot 16.0\text{ m} = 1920\text{ J}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student equates the motor's work solely to the change in kinetic energy, completely neglecting the work required to overcome friction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Wmotor=ΔK=12mv2−12mv02  ⟹  Wmotor=12(45.0 kg)(8.00 m/s)2−0W_{\text{motor}} = \Delta K = \frac{1}{2}mv^2 - \frac{1}{2}mv_0^2 \implies W_{\text{motor}} = \frac{1}{2}(45.0\text{ kg})(8.00\text{ m/s})^2 - 0

    Correct

    Wnet=ΔK=12mv2−12mv02=1440 JW_{\text{net}} = \Delta K = \frac{1}{2}mv^2 - \frac{1}{2}mv_0^2 = 1440\text{ J} and Wnet=Wmotor+WfW_{\text{net}} = W_{\text{motor}} + W_f

    You applied the work-energy theorem to the motor alone rather than the net work. By the work-energy theorem, the net work on the object equals the change in kinetic energy (Wnet=Wmotor+Wf=ΔKW_{\text{net}} = W_{\text{motor}} + W_f = \Delta K). Because friction opposes motion, the motor must supply enough work to overcome friction in addition to changing the kinetic energy.

  2. Step 2

    Wmotor=1440 JW_{\text{motor}} = 1440\text{ J}

    Correct

    Wmotor=1920 JW_{\text{motor}} = 1920\text{ J}

    Because friction was omitted in the initial energy balance, your final numerical value only represents the gain in kinetic energy rather than the total work done by the motor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for kinetic energy and substituted the given mass and final speed.

You evaluated the arithmetic for 12(45.0 kg)(8.00 m/s)2\frac{1}{2}(45.0\text{ kg})(8.00\text{ m/s})^2 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplying the Work-Energy Theorem to a Single Force

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the work-energy theorem as equating the work of an individual driving force (WmotorW_{\text{motor}}) to ΔK\Delta K, forgetting that WnetW_{\text{net}} is the sum of works from all active forces, including non-conservative friction.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Net Work Before Equating to $\Delta K$
  • The work-energy theorem states Wnet=∑Wi=ΔKW_{\text{net}} = \sum W_i = \Delta K, not Wapplied=ΔKW_{\text{applied}} = \Delta K.

  • List every force acting along the line of motion (here, FmotorF_{\text{motor}} forward and fkf_k backward), write Wmotor+Wf=ΔKW_{\text{motor}} + W_f = \Delta K, and solve for WmotorW_{\text{motor}}.

Find Displacement from Speed-Time Graph
  • Work done by friction requires distance: Wf=−fkΔxW_f = -f_k \Delta x, where Δx\Delta x is the area under the v–tv\text{--}t curve.

  • Calculate Δx=12(4.00 s)(8.00 m/s)=16.0 m\Delta x = \frac{1}{2}(4.00\text{ s})(8.00\text{ m/s}) = 16.0\text{ m}, then compute Wf=−(30.0 N)(16.0 m)=−480 JW_f = -(30.0\text{ N})(16.0\text{ m}) = -480\text{ J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the displacement during the acceleration phase from the area under the speed-time graph: Δx=12(4.00 s)(8.00 m/s)=16.0 m\Delta x = \frac{1}{2}(4.00\text{ s})(8.00\text{ m/s}) = 16.0\text{ m}.

  2. Calculate the work done by kinetic friction: Wf=−fk⋅Δx=−(30.0 N)(16.0 m)=−480 JW_f = -f_k \cdot \Delta x = -(30.0\text{ N})(16.0\text{ m}) = -480\text{ J}.

  3. Substitute into the work-energy theorem: Wnet=Wmotor+Wf=ΔK  ⟹  Wmotor−480 J=1440 JW_{\text{net}} = W_{\text{motor}} + W_f = \Delta K \implies W_{\text{motor}} - 480\text{ J} = 1440\text{ J}.

  4. Solve for the motor's work: Wmotor=1440 J+480 J=1920 JW_{\text{motor}} = 1440\text{ J} + 480\text{ J} = 1920\text{ J}.

Final answer

1920 J1920\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick free-body diagram along the direction of motion to ensure no opposing forces (like friction or gravity components) are left out of WnetW_{\text{net}}.

  • Practice using the alternative method Fnet=ma  ⟹  Fmotor=ma+fkF_{\text{net}} = ma \implies F_{\text{motor}} = ma + f_k followed by Wmotor=FmotorΔxW_{\text{motor}} = F_{\text{motor}}\Delta x to double-check energy calculations.

OverviewACEpath Teacher's Diagnosis

02 The student subtracts the work done against friction from the change in kinetic energy instead of adding it to find the motor's work.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔK=12mv2=12(45.0 kg)(8.00 m/s)2=1440 J\Delta K = \frac{1}{2} m v^2 = \frac{1}{2} (45.0\text{ kg})(8.00\text{ m/s})^2 = 1440\text{ J}

  2. Step 2

    d=12(8.00 m/s)(4.00 s)=16.0 md = \frac{1}{2} (8.00\text{ m/s})(4.00\text{ s}) = 16.0\text{ m}

  3. Step 3

    Wf=fkd=(30.0 N)(16.0 m)=480 JW_f = f_k d = (30.0\text{ N})(16.0\text{ m}) = 480\text{ J}

  4. Step 4

    Wmotor=ΔK−Wf=1440 J−480 J=960 JW_{\text{motor}} = \Delta K - W_f = 1440\text{ J} - 480\text{ J} = 960\text{ J}

    Correct

    Wmotor=ΔK+fkd=1440 J+480 J=1920 JW_{\text{motor}} = \Delta K + f_k d = 1440\text{ J} + 480\text{ J} = 1920\text{ J}

    Because friction opposes motion, the net work on the cart is Wnet=Wmotor+Wfriction=Wmotor−fkd=ΔKW_{\text{net}} = W_{\text{motor}} + W_{\text{friction}} = W_{\text{motor}} - f_k d = \Delta K. Solving for the motor's work requires adding the friction work to the kinetic energy gain: Wmotor=ΔK+fkdW_{\text{motor}} = \Delta K + f_k d.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the initial and final speeds to compute the change in kinetic energy.

You used the area under the speed-time graph to obtain the correct displacement.

You correctly multiplied the frictional force by the displacement to find the energy lost to friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Work-energy sign convention error

You subtracted the work done by friction from the kinetic energy gain instead of adding it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing net work on an object with the work performed by an individual driving force. The motor must supply enough energy to both increase the cart's kinetic energy and overcome the resistive work of friction (Winput=ΔK+∣Wf∣W_{\text{input}} = \Delta K + |W_f|).

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check
  • A driving source must do more work when resistance is present than in a frictionless scenario.

  • Check if your answer for the motor's work (960 J960\text{ J}) is greater than the kinetic energy gained (1440 J1440\text{ J}). Since friction opposes motion, the motor must supply at least 1440 J1440\text{ J} plus the energy lost to friction.

Work-Energy Theorem Setup
  • Wnet=∑Wi=Wdriving+Wfriction=ΔKW_{\text{net}} = \sum W_i = W_{\text{driving}} + W_{\text{friction}} = \Delta K, where Wfriction=−fkdW_{\text{friction}} = -f_k d.

  • Substitute friction as a negative term in the net work expression: Wmotor−fkd=ΔKW_{\text{motor}} - f_k d = \Delta K, which yields Wmotor=ΔK+fkdW_{\text{motor}} = \Delta K + f_k d.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the work-energy theorem: Wnet=Wmotor+Wf=ΔKW_{\text{net}} = W_{\text{motor}} + W_f = \Delta K.

  2. Substitute the opposing work done by friction: Wmotor−480 J=1440 JW_{\text{motor}} - 480\text{ J} = 1440\text{ J}.

  3. Solve for the work of the motor: Wmotor=1440 J+480 J=1920 JW_{\text{motor}} = 1440\text{ J} + 480\text{ J} = 1920\text{ J}.

Final answer

1920 J1920\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how energy conservation accounts for dissipation: total work input equals mechanical energy gained plus thermal energy dissipated.

  • Practice drawing free-body diagrams to verify that the driving force exceeds the frictional force during forward acceleration.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the displacement using d = v t instead of the average velocity for uniform acceleration from rest.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔK=12mv2=12(45.0 kg)(8.00 m/s)2=1440 J\Delta K = \frac{1}{2} m v^2 = \frac{1}{2}(45.0\text{ kg})(8.00\text{ m/s})^2 = 1440\text{ J}

  2. Step 2

    d=vt=(8.00 m/s)(4.00 s)=32.0 md = vt = (8.00\text{ m/s})(4.00\text{ s}) = 32.0\text{ m}

    Correct

    d=12vft=12(8.00 m/s)(4.00 s)=16.0 md = \frac{1}{2} v_f t = \frac{1}{2}(8.00\text{ m/s})(4.00\text{ s}) = 16.0\text{ m}

    Because the cart accelerates uniformly from rest, its average speed is 0+8.002=4.00 m/s\frac{0 + 8.00}{2} = 4.00\text{ m/s}, or geometrically the displacement is the triangular area under the v–tv\text{--}t graph 12(4.00 s)(8.00 m/s)=16.0 m\frac{1}{2}(4.00\text{ s})(8.00\text{ m/s}) = 16.0\text{ m}. The formula d=vtd = vt applies only when speed is constant.

  3. Step 3

    Wf=fkd=(30.0 N)(32.0 m)=960 JW_f = f_k d = (30.0\text{ N})(32.0\text{ m}) = 960\text{ J}

    Correct

    Wf=fkd=(30.0 N)(16.0 m)=480 JW_f = f_k d = (30.0\text{ N})(16.0\text{ m}) = 480\text{ J}

    Your multiplication was evaluated consistently with your work formula, but this value is doubled because of the incorrect distance from Step 2.

  4. Step 4

    Wmotor=ΔK+Wf=1440 J+960 J=2400 JW_{\text{motor}} = \Delta K + W_f = 1440\text{ J} + 960\text{ J} = 2400\text{ J}

    Correct

    Wmotor=ΔK+Wf=1440 J+480 J=1920 JW_{\text{motor}} = \Delta K + W_f = 1440\text{ J} + 480\text{ J} = 1920\text{ J}

    Your work-energy equation setup was correct, but substituting the incorrect friction work led to an erroneous final answer.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the formula for kinetic energy ΔK=12mv2\Delta K = \frac{1}{2}mv^2.

You correctly recognized that the motor's work must supply both the change in kinetic energy and overcome friction work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Mismatch

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated an accelerating body as moving at a constant speed by applying d=vtd = vt with the final speed, doubling the actual triangular area under the speed-time graph.

REASONING PATH
Your ACEpath teacher’s suggested approach
Graph Area for Displacement
  • Displacement on a speed-time graph is the area between the curve and the time axis; for linear acceleration from rest, this shape is a triangle with area 12vmaxt\frac{1}{2} v_{\text{max}} t.

  • Always sketch the speed-time graph or write d=vavgt=vi+vf2td = v_{\text{avg}} t = \frac{v_i + v_f}{2}t before computing distance during acceleration.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate displacement using the area under the linear acceleration graph: d=12(8.00 m/s)(4.00 s)=16.0 md = \frac{1}{2}(8.00\text{ m/s})(4.00\text{ s}) = 16.0\text{ m}.

  2. Calculate the work done against friction: Wf=fkd=(30.0 N)(16.0 m)=480 JW_f = f_k d = (30.0\text{ N})(16.0\text{ m}) = 480\text{ J}.

  3. Sum kinetic energy gain and friction losses: Wmotor=ΔK+Wf=1440 J+480 J=1920 JW_{\text{motor}} = \Delta K + W_f = 1440\text{ J} + 480\text{ J} = 1920\text{ J}.

Final answer

1920 J1920\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review displacement on linear v–tv\text{--}t graphs as triangular areas rather than rectangular areas.

  • Complete the targeted flashcards below to reinforce when d=vtd = vt is valid versus when average velocity must be used.

Lock it in

Similar question

01

A 10.0 kg10.0\text{ kg} sled is pulled from rest across a horizontal snowy surface where friction is 15.0 N15.0\text{ N}. After traveling 8.00 m8.00\text{ m}, the sled reaches a speed of 4.00 m/s4.00\text{ m/s}. Find the work done by the pulling force.

Answer

ΔK=12(10.0 kg)(4.00 m/s)2=80.0 J\Delta K = \frac{1}{2}(10.0\text{ kg})(4.00\text{ m/s})^2 = 80.0\text{ J}. Work against friction is ∣Wf∣=fkd=(15.0 N)(8.00 m)=120 J|W_f| = f_k d = (15.0\text{ N})(8.00\text{ m}) = 120\text{ J}. By the work-energy theorem, Wpull=ΔK+∣Wf∣=80.0 J+120 J=200 JW_{\text{pull}} = \Delta K + |W_f| = 80.0\text{ J} + 120\text{ J} = 200\text{ J}.

02

A 20.0 kg20.0\text{ kg} cart moves in a straight line. Its speed-time graph shows uniform acceleration from 2.00 m/s2.00\text{ m/s} to 6.00 m/s6.00\text{ m/s} over 5.00 s5.00\text{ s}. Throughout this time, a constant resistive drag force of 25.0 N25.0\text{ N} opposes motion. Calculate the work done by the forward driving force during these 5.00 s5.00\text{ s}.

Answer

Distance is the trapezoidal area under the v–tv\text{--}t curve: Δx=2.00+6.002×5.00=20.0 m\Delta x = \frac{2.00 + 6.00}{2} \times 5.00 = 20.0\text{ m}. Change in kinetic energy: ΔK=12(20.0)(6.002−2.002)=10.0(32.0)=320 J\Delta K = \frac{1}{2}(20.0)(6.00^2 - 2.00^2) = 10.0(32.0) = 320\text{ J}. Work against drag: ∣Wdrag∣=(25.0 N)(20.0 m)=500 J|W_{\text{drag}}| = (25.0\text{ N})(20.0\text{ m}) = 500\text{ J}. Total work done by driving force: Wdrive=ΔK+∣Wdrag∣=320 J+500 J=820 JW_{\text{drive}} = \Delta K + |W_{\text{drag}}| = 320\text{ J} + 500\text{ J} = 820\text{ J}.

03

A 50.0 kg50.0\text{ kg} crate is hauled up a 30.0∘30.0^\circ frictionless ramp of length 10.0 m10.0\text{ m} by a cable parallel to the incline. It starts from rest and reaches 4.00 m/s4.00\text{ m/s} at the top. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the tension work done by the cable.

Answer

The active forces along the ramp are tension TT (forward) and gravity component mgsin⁡θmg\sin\theta (opposing). Vertical height gained is h=(10.0 m)sin⁡30.0∘=5.00 mh = (10.0\text{ m})\sin 30.0^\circ = 5.00\text{ m}. Work done against gravity is Wg=−mgh=−(50.0)(9.80)(5.00)=−2450 JW_g = -mgh = -(50.0)(9.80)(5.00) = -2450\text{ J}. Change in kinetic energy is ΔK=12(50.0)(4.00)2=400 J\Delta K = \frac{1}{2}(50.0)(4.00)^2 = 400\text{ J}. From WT+Wg=ΔKW_T + W_g = \Delta K, we have WT=ΔK−Wg=400 J+2450 J=2850 JW_T = \Delta K - W_g = 400\text{ J} + 2450\text{ J} = 2850\text{ J}.

Loading workspace…