Resources
A parallel-plate capacitor with initial capacitance remains continuously connected across the terminals of an ideal DC voltage source of . An external agent slowly and carefully inserts a slab of dielectric with relative permittivity between the plates, completely filling the volume. Determine with strict adherence to thermodynamic sign conventions: (a) the change in electrostatic potential energy stored in the capacitor, , in microjoules (); (b) the energy transferred by the voltage source (battery), , into the circuit in microjoules (); and (c) the net work performed by the external agent, , to prevent the dielectric slab from accelerating during insertion in microjoules ().
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Change in Stored Electrostatic Potential Energy ()
Because the capacitor remains connected to the DC voltage source throughout the process, the potential difference across the plates is held constant at .
The initial capacitance of the empty capacitor is:
Inserting the dielectric increases the capacitance by a factor of :
The electrostatic potential energy stored in a capacitor at a fixed potential difference is given by .
The initial and final stored energies are:
The change in stored electrostatic potential energy is:
Energy Supplied by the Voltage Source ()
As the capacitance increases at constant voltage, additional charge flows from the battery onto the plates:
The energy supplied by the ideal battery to transfer this charge through the potential difference is:
Work Done by the External Agent ()
By the work-energy theorem for the complete system (capacitor + dielectric slab) connected to the battery:
Because the slab is moved slowly and carefully with no change in kinetic energy ():
Physical Intuition & Common Pitfall: The fringing electric field at the edges of the plates polarizes the dielectric and pulls it inward with an attractive electrostatic force . To insert the slab quasi-statically without acceleration, the external agent must apply a restraining force directed opposite to the displacement. Consequently, the external agent does negative mechanical work, absorbing the excess energy supplied by the battery.
Typical errors
01 The student forgets that the battery does work to supply charge during insertion at constant voltage, incorrectly assuming energy is conserved between the capacitor and external agent alone so W_ext equals +ΔU.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Because the capacitor remains connected to the battery during insertion, energy enters the system from both the external agent and the battery: . Setting ignores the work done by the battery.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the increased capacitance after introducing the dielectric slab.
You accurately found the initial, final, and net change in electrostatic stored energy.
You correctly evaluated the charge delivered by the DC source and the battery work.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou calculated in part (b) but then isolated the capacitor as if it were disconnected from the battery when solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the energy balance of an isolated capacitor (where because no battery is present) with a capacitor connected to a constant voltage source, where both the battery and the external agent perform work on the system: .
REASONING PATH
Your ACEpath teacher’s suggested approach- System Energy Conservation
For a quasi-static process with no change in kinetic energy: .
Always write out the full work-energy balance before solving for unknown mechanical work.
- Physical Sign of External Restraining Force
The electric field attracts the dielectric slab inward, so the external agent must pull outward to prevent acceleration.
Verify that when inserting a dielectric at constant voltage, since displacement and external force are antiparallel.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the overall energy balance for the circuit and dielectric system: .
Substitute the previously computed values: .
Solve for the external mechanical work: .
02 The student incorrectly assumes the capacitor is isolated with constant charge Q instead of connected to a battery at constant voltage, resulting in a formula where dielectric insertion decreases stored energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
⟹ ⟹
- Step 2
⟹ ⟹
Correct⟹
Because the capacitor remains connected to the battery, the voltage is held constant, not the charge . As capacitance increases, more charge flows onto the plates, so the stored energy increases rather than decreases.
- Step 3Correct
This step follows directly from your assumption of constant charge. In reality, the battery transfers charge into the circuit, supplying of energy.
- Step 4Correct
You set up the correct work-energy relation , but the numerical result was affected by the earlier values.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the final capacitance using the dielectric constant .
You correctly calculated the initial energy stored in the capacitor.
You correctly identified and applied the work-energy relation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the capacitor as an isolated system where charge is conserved. When a capacitor remains connected to a voltage source, the potential difference remains fixed while charge is freely exchanged between the plates and the battery.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify Connection Status
If a capacitor remains connected to a battery, and . If it is disconnected/isolated, and .
Look for phrases like 'remains continuously connected across the terminals of a DC voltage source' before choosing which capacitor energy formula to use.
- Battery Work Relation
When capacitance changes by at constant voltage , the battery supplies energy .
Calculate the charge entering the plates , then determine battery work as .
CORRECTED PATH
ACEpath Teacher's DemonstrationKeep voltage constant at : .
Find the change in stored energy: .
Find energy supplied by the battery: .
Find mechanical work by the external agent: .
(a) ; (b) ; (c)
03 The student misinterprets the work done by the external agent as the work done by the electric field on the slab, incorrectly concluding W_ext is positive +0.360 μJ.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set instead of using the work-energy relation . Because the fringing electric field naturally pulls the dielectric inward, you must exert an outward restraining force to insert it at constant speed, making the external work negative.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used to compute both initial and final stored electrostatic energies.
You correctly calculated the charge transferred from the voltage source and the work delivered by the battery .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou swapped the order of terms in the work-energy balance equation for part (c).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the external work as the positive difference between battery energy and stored energy (), overlooking that the total energy input into the capacitor system is the sum of battery work and external work: . Physically, the electric field pulls the slab inward, so an external agent must pull backward to prevent acceleration, performing negative work.
REASONING PATH
Your ACEpath teacher’s suggested approach- System Work-Energy Balance
For a capacitor connected to a battery with quasi-static movement, .
Rearrange the conservation equation to isolate .
- Physical Force Direction Check
Fringing fields attract dielectrics into a capacitor ( points inward).
Verify that to prevent acceleration, must oppose motion, guaranteeing .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the work-energy theorem for the capacitor-slab system: .
Solve for the external work: .
Substitute your verified values: .
(a) ; (b) ; (c)
Lock it in
What is the complete work-energy relation for slowly inserting a dielectric slab into a capacitor connected to a battery?
. The total change in stored electrostatic energy equals the sum of electrical energy from the battery and mechanical work from the external agent.
Similar question
A parallel-plate capacitor with capacitance is connected to a battery. A slab with dielectric constant is slowly inserted to fill the capacitor while remaining connected to the battery. Calculate , the work done by the external agent.
Answer
. Key steps: . Stored energy change is . Battery work is . Thus, .
A capacitor of capacitance is charged to and then disconnected from the battery. A dielectric slab with is then inserted to fill the gap. Determine the work done by the external agent, , during this process.
Answer
. Key steps: Because the capacitor is isolated, is constant, and . Initial energy ; final energy . Energy conservation yields .
A parallel-plate capacitor with plate area and separation is held at constant voltage . A dielectric slab of relative permittivity fills the capacitor. If the external agent now slowly pulls the slab completely out of the capacitor, find the mechanical work done by the agent and the energy delivered by the battery in terms of and .
Answer
and . Key steps: When removing the slab, capacitance decreases by , so . Charge flow back into the battery causes . Applying gives .