Resources
Two identical, mutually incoherent motorized air blowers operate simultaneously in a cleanroom. When blower operates alone, a monitoring microphone records a sound level of . When blower operates alone, the sound level is . A technician incorrectly predicts that turning both blowers on will double the decibel rating to . Determine: (a) the correct total sound level when both blowers run simultaneously, and (b) by how many decibels the sound level changes () if four such identical blowers operate together compared to a single blower.
Answer and steps
Final answer
(a) ; (b)
Steps
Understanding Sound Intensity and the Decibel Scale
Sound level measured in decibels () is related to acoustic intensity by the logarithmic formula:
where is the standard reference threshold of hearing.
Common Pitfall: Decibel values cannot be added directly (). Because decibels represent a logarithmic ratio of intensities, doubling the sound sources does not double the decibel value. Instead, for mutually incoherent sound sources, their physical intensities add linearly:
Part (a): Total Sound Level with Two Blowers
- Express the total intensity:
Since the two blowers are identical and incoherent, each produces an intensity . Running both gives: -
Compute the resulting sound level :
Using the logarithmic property :Substitute :
Part (b): Change in Sound Level for Four Blowers
- Relate four blowers to one blower:
Operating four identical blowers quadruples the total intensity: -
Calculate the difference :
Using the quotient rule of logarithms:
Each doubling of sound intensity adds approximately , so quadrupling the intensity adds .
Typical errors
01 The student directly adds decibel levels together linearly instead of adding sound intensities, leading to a doubled sound level for two blowers and four times the decibels for four blowers.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Decibel levels cannot be added directly because the decibel scale is logarithmic. For mutually incoherent sources, you must add sound intensities linearly (), which corresponds to adding to the single-blower level.
- Step 2Correct
Operating four identical blowers quadruples the total acoustic intensity (), not the decibel value. The resulting sound level increase is .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that part (b) requires evaluating the difference between the four-source sound level and the single-source sound level.
You performed arithmetic calculations accurately according to your chosen linear model.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed sound levels in decibels obey linear superposition, overlooking that decibels represent a logarithmic ratio of intensities where physical intensities sum linearly, resulting in fixed decibel shifts for multiplicative factor increases.
REASONING PATH
Your ACEpath teacher’s suggested approach- Linear vs. Logarithmic Superposition
For identical incoherent sound sources of intensity , , and .
Never add or multiply decibels directly; convert to intensity, sum the intensities, and convert back to decibels using logarithmic identities.
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress total intensity for two identical sources: .
Apply the decibel definition: .
Express total intensity for four identical sources: .
Compute the change in sound level: .
(a) ; (b)
02 The student mistakenly uses the 20·log10 factor from voltage or sound pressure instead of the 10·log10 factor for sound intensity, resulting in an increase of 6.0 dB for two blowers and 12.0 dB for four blowers.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Sound intensity level is defined using a multiplier of , , because intensity is a power-like quantity. Using applies to root-power field quantities such as sound pressure or voltage, not sound intensity.
- Step 3Correct
Operating four identical blowers quadruples the intensity (), so the change in decibels should be rather than .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly realized that decibel values cannot be added directly.
You correctly added the physical intensities linearly for independent incoherent sources.
You set up the logarithmic ratio change correctly using properties of logarithms.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou used the multiplier (which applies to field or amplitude quantities like sound pressure or electric voltage ) instead of the multiplier required for power and intensity quantities ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Power vs. Amplitude Logarithmic Multipliers
Power and intensity quantities use or , whereas field/amplitude quantities (pressure, voltage) use because intensity is proportional to amplitude squared ().
Whenever you are dealing directly with sound intensity or power , always write .
CORRECTED PATH
ACEpath Teacher's DemonstrationFor part (a), doubling the intensity gives . Adding this to the single-blower level yields .
For part (b), quadrupling the intensity gives .
(a) ; (b)
03 The student calculates the final decibel level for four blowers (74.0 dB) rather than the requested decibel change (Δβ = 6.0 dB).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The question asks by how many decibels the sound level changes (), not for the final decibel rating. You calculated instead of stating the difference (or ).
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly added incoherent sound intensities linearly rather than adding decibel values directly.
You applied the logarithmic rule accurately for both two and four sound sources.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou calculated the final total sound level instead of stopping at the sound level increase .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the absolute sound level with the change in sound level . When asked for a change (), you only need the logarithmic ratio term.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish Level vs. Change
Absolute sound level is , whereas a change in sound level is .
Check whether the prompt asks for the new total reading or the change . If it asks for , do not add the initial base decibels.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) (or )
Lock it in
Can you add sound levels in decibels directly when combining two independent sound sources?
No. Decibels are logarithmic. You must add their physical sound intensities () and then compute the new sound level.
Similar question
A single violin plays at a sound level of . If three more identical violins join in, playing at the exact same intensity (so there are violins in total), what is the total sound level?
Answer
. Key steps: Quadrupling the intensity gives .
A factory workshop contains identical machines running simultaneously, producing a total sound level of . What was the sound level produced by just one machine running alone?
Answer
. Key steps: Total intensity is , so . Thus, .
Two independent sound sources have sound levels of and . Determine the combined sound level when both operate at the same time.
Answer
. Key steps: Convert to relative intensities: and . Sum intensities: . Convert back: .