Resources

A small ball of mass m=0.200 kgm = 0.200\text{ kg} is compressed against a horizontal linear spring of spring constant k=450 N/mk = 450\text{ N/m} by a distance x=0.120 mx = 0.120\text{ m} on a smooth, elevated table at height h=1.25 mh = 1.25\text{ m} above the floor. Upon release, the ball leaves the spring and launches horizontally off the table edge into free-fall projectile motion. Identify the two coupled physical laws required to determine the impact speed of the ball immediately before hitting the floor, state their governing relationship, and calculate the final impact speed vfv_f (use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

Work-Energy Theorem (Conservation of Mechanical Energy) coupled with Kinematics of Free Fall; Einitial=Efinal  ⟹  12kx2+mgh=12mvf2E_{\text{initial}} = E_{\text{final}} \implies \frac{1}{2}kx^2 + mgh = \frac{1}{2}m v_f^2; vf=7.54 m/sv_f = 7.54\text{ m/s}.

Steps

01

Identify the Applicable Physical Laws

To analyze the complete motion from release to floor impact:

  1. The Law of Conservation of Mechanical Energy (or Work-Energy Theorem): The table is frictionless, the spring force is conservative, and air resistance is negligible. Therefore, the total mechanical energy of the system remains constant throughout both the horizontal launch and the subsequent flight under gravity.
  2. Kinematics of Projectile Motion / Free Fall: Once the ball leaves the edge of the table, gravity acts as the sole downward force, causing two-dimensional projectile motion where horizontal velocity remains constant and vertical velocity increases linearly under constant acceleration gg.

Coupling these two laws allows us to determine the final impact state: conservation of mechanical energy relates the initial stored potential energy directly to the total kinetic energy just before impact, while kinematic principles ensure that the mechanical trajectory correctly maps the conversion between gravitational potential energy and directional components of velocity.


02

Formulate the Governing Energy Relationship

Set the floor as the reference level for gravitational potential energy (y=0y = 0).

  • Initial state (compressed at height hh): The ball is at rest (v0=0v_0 = 0), the spring is compressed by xx, and the height is hh: Einitial=Eelastic+Egravitational+EkineticE_{\text{initial}} = E_{\text{elastic}} + E_{\text{gravitational}} + E_{\text{kinetic}} Einitial=12kx2+mgh+0E_{\text{initial}} = \frac{1}{2}kx^2 + mgh + 0
  • Final state (immediately before hitting the floor at y=0y = 0): The spring is fully relaxed, the gravitational potential energy is zero, and the ball moves at speed vfv_f: Efinal=12mvf2E_{\text{final}} = \frac{1}{2}mv_f^2

Equating the total initial and final mechanical energy: 12kx2+mgh=12mvf2\frac{1}{2}kx^2 + mgh = \frac{1}{2}mv_f^2


03

Calculate the Final Impact Speed vfv_f

Substitute the given numerical values into the energy equation:

  • m=0.200 kgm = 0.200\text{ kg}
  • k=450 N/mk = 450\text{ N/m}
  • x=0.120 mx = 0.120\text{ m}
  • h=1.25 mh = 1.25\text{ m}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2
  1. Compute initial elastic potential energy: Eelastic=12(450)(0.120)2=225⋅0.0144=3.24 JE_{\text{elastic}} = \frac{1}{2}(450)(0.120)^2 = 225 \cdot 0.0144 = 3.24\text{ J}
  2. Compute initial gravitational potential energy: Egrav=(0.200)(9.80)(1.25)=2.45 JE_{\text{grav}} = (0.200)(9.80)(1.25) = 2.45\text{ J}
  3. Sum to find the total mechanical energy: Etotal=3.24 J+2.45 J=5.69 JE_{\text{total}} = 3.24\text{ J} + 2.45\text{ J} = 5.69\text{ J}
  4. Solve for the final speed vfv_f: 12(0.200)vf2=5.69\frac{1}{2}(0.200)v_f^2 = 5.69 0.100vf2=5.69  ⟹  vf2=56.9 m2/s20.100 v_f^2 = 5.69 \implies v_f^2 = 56.9\text{ m}^2/\text{s}^2 vf=56.9≈7.54 m/sv_f = \sqrt{56.9} \approx 7.54\text{ m/s}

(Pitfall note: You do not need to resolve the horizontal launch speed and the vertical kinematic component separately to find the overall magnitude vfv_f; total energy conservation yields the net speed directly because vf2=vx2+vy2v_f^2 = v_x^2 + v_y^2.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the final impact speed with only the horizontal launch speed, neglecting the kinetic energy gained from falling through the height h.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    12kx2=12mv02  ⟹  v0=xkm  ⟹  v0=0.120×4500.200=5.69 m/s\frac{1}{2}kx^2 = \frac{1}{2}mv_0^2 \implies v_0 = x\sqrt{\frac{k}{m}} \implies v_0 = 0.120 \times \sqrt{\frac{450}{0.200}} = 5.69\text{ m/s}

  2. Step 2

    vf=5.69 m/sv_f = 5.69\text{ m/s}

    Correct

    12mvf2=12mv02+mgh  ⟹  vf=v02+2gh=5.692+2(9.80)(1.25)≈7.54 m/s\frac{1}{2}mv_f^2 = \frac{1}{2}mv_0^2 + mgh \implies v_f = \sqrt{v_0^2 + 2gh} = \sqrt{5.69^2 + 2(9.80)(1.25)} \approx 7.54\text{ m/s}

    You treated the horizontal launch speed as the final impact speed at the floor. As the ball falls through height hh, gravity does work, adding downward vertical velocity vyv_y such that vf=vx2+vy2v_f = \sqrt{v_x^2 + v_y^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the elastic potential energy stored in the compressed spring converts into kinetic energy upon launch.

You correctly substituted the numerical values for spring constant, compression, and mass to calculate the horizontal launch speed v0=5.69 m/sv_0 = 5.69\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglected Gravitational Potential Energy / Kinematic Drop

You stopped calculating after finding the launch speed at the table edge and took it as the impact speed on the floor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the spring decompression as the entire problem rather than coupling the spring's elastic energy release with the gravitational energy gained during free-fall projectile motion.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Initial and Final System States
  • Total mechanical energy conservation requires accounting for all potential energy changes between the release point and the final impact point: Eelastic+Egrav=Ekinetic, finalE_{\text{elastic}} + E_{\text{grav}} = E_{\text{kinetic, final}}.

  • Include mghmgh whenever an object changes vertical elevation during its trajectory.

Recognize Multi-Dimensional Velocity at Impact
  • For a horizontal launch, the impact speed is vf=vx2+vy2v_f = \sqrt{v_x^2 + v_y^2}, where vx=v0v_x = v_0 and vy=2ghv_y = \sqrt{2gh}.

  • Check whether the object has a vertical component of velocity before stating the scalar speed at ground level.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the vertical velocity gained during the fall: vy2=2gh=2(9.80)(1.25)=24.5 m2/s2v_y^2 = 2gh = 2(9.80)(1.25) = 24.5\text{ m}^2/\text{s}^2.

  2. Combine the perpendicular velocity components: vf2=vx2+vy2=5.692+24.5=32.4+24.5=56.9 m2/s2v_f^2 = v_x^2 + v_y^2 = 5.69^2 + 24.5 = 32.4 + 24.5 = 56.9\text{ m}^2/\text{s}^2.

  3. Alternatively, use total energy conservation: 12kx2+mgh=12mvf2  ⟹  3.24 J+2.45 J=0.100vf2  ⟹  vf=56.9≈7.54 m/s\frac{1}{2}kx^2 + mgh = \frac{1}{2}mv_f^2 \implies 3.24\text{ J} + 2.45\text{ J} = 0.100 v_f^2 \implies v_f = \sqrt{56.9} \approx 7.54\text{ m/s}.

Final answer

vf≈7.54 m/sv_f \approx 7.54\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • State the two governing laws explicitly: Conservation of Mechanical Energy (or Work-Energy Theorem) and Projectile Kinematics.

  • Always sketch the initial state (at height hh) and the final state (at ground level y=0y=0) to ensure every energy contribution is included.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root of the final kinetic energy or velocity-squared sum, reporting v_f² instead of v_f.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (12)kx2=(12)mv02  ⟹  v02=(450×0.1202)/0.200=32.4 m2/s2(\frac{1}{2})kx^2 = (\frac{1}{2})mv_0^2 \implies v_0^2 = (450 \times 0.120^2)/0.200 = 32.4\text{ m}^2/\text{s}^2

  2. Step 2

    vf2=v02+2gh  ⟹  vf2=32.4+2×9.80×1.25=56.9 m2/s2v_f^2 = v_0^2 + 2gh \implies v_f^2 = 32.4 + 2 \times 9.80 \times 1.25 = 56.9\text{ m}^2/\text{s}^2

  3. Step 3

    vf=56.9 m/sv_f = 56.9\text{ m/s}

    Correct

    vf=56.9 m2/s2≈7.54 m/sv_f = \sqrt{56.9\text{ m}^2/\text{s}^2} \approx 7.54\text{ m/s}

    You equated the speed vfv_f directly to the value of vf2v_f^2 instead of taking the square root.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conservation of mechanical energy for the horizontal spring release.

You used an appropriate kinematic relation to account for the gravitational acceleration over height hh.

You accurately performed all arithmetic calculations leading up to vf2=56.9 m2/s2v_f^2 = 56.9\text{ m}^2/\text{s}^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root on squared velocity

You dropped the exponent from vf2v_f^2 on the left side without taking the square root of the numerical value on the right side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the numerical calculation of squared velocity as the final target variable, overlooking the final algebraic step of taking the square root to convert v2v^2 to vv.

REASONING PATH
Your ACEpath teacher’s suggested approach
Variable matching
  • If an equation solves for v2v^2, the speed vv is v2\sqrt{v^2}.

  • Always verify that the symbol on the left-hand side matches the target variable requested before writing down your final answer.

Dimensional and magnitude sanity check
  • Compare the impact speed to the initial launch speed: since v0=32.4≈5.7 m/sv_0 = \sqrt{32.4} \approx 5.7\text{ m/s}, falling only 1.25 m1.25\text{ m} cannot increase the speed ten-fold to 56.9 m/s56.9\text{ m/s}.

  • Check whether your final velocity magnitude is physically reasonable for a modest drop height.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the square root of both sides of vf2=56.9 m2/s2v_f^2 = 56.9\text{ m}^2/\text{s}^2:

  2. vf=56.9≈7.543 m/sv_f = \sqrt{56.9} \approx 7.543\text{ m/s}.

Final answer

vf≈7.54 m/sv_f \approx 7.54\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Circle squared variables like v2v^2 or ω2\omega^2 in your scratch work as a reminder that an extra square root step remains.

  • Practice checking whether the order of magnitude of your final speed makes physical sense given the drop height and initial launch speed.

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 1/2 in the elastic potential energy formula, writing kx² = (1/2)mv₀².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    kx2=12mv02  ⟹  v02=2kx2m=2×450×(0.120)20.200=64.8 m2/s2kx^2 = \frac{1}{2}mv_0^2 \implies v_0^2 = \frac{2kx^2}{m} = \frac{2 \times 450 \times (0.120)^2}{0.200} = 64.8\text{ m}^2/\text{s}^2

    Correct

    12kx2=12mv02  ⟹  v02=kx2m=450×(0.120)20.200=32.4 m2/s2\frac{1}{2}kx^2 = \frac{1}{2}mv_0^2 \implies v_0^2 = \frac{kx^2}{m} = \frac{450 \times (0.120)^2}{0.200} = 32.4\text{ m}^2/\text{s}^2

    You omitted the factor of 12\frac{1}{2} when setting up the elastic potential energy of the compressed spring, writing kx2kx^2 instead of 12kx2\frac{1}{2}kx^2. This doubled your value for v02v_0^2.

  2. Step 2

    vf=v02+2gh=64.8+2×9.80×1.25=64.8+24.5=89.3=9.45 m/sv_f = \sqrt{v_0^2 + 2gh} = \sqrt{64.8 + 2 \times 9.80 \times 1.25} = \sqrt{64.8 + 24.5} = \sqrt{89.3} = 9.45\text{ m/s}

    Correct

    vf=v02+2gh=32.4+24.5=56.9≈7.54 m/sv_f = \sqrt{v_0^2 + 2gh} = \sqrt{32.4 + 24.5} = \sqrt{56.9} \approx 7.54\text{ m/s}

    You used the correct kinematic relation vf=v02+2ghv_f = \sqrt{v_0^2 + 2gh} to determine the impact speed, but your result is incorrect because it inherited the inflated v02v_0^2 from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the initial spring energy converts into horizontal kinetic energy of the ball.

You correctly combined the horizontal launch velocity with vertical gravitational acceleration using vf=v02+2ghv_f = \sqrt{v_0^2 + 2gh}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula omission

You forgot the factor of 12\frac{1}{2} on the spring potential energy side of your energy balance equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the spring force expression (F=kxF = kx) with the integrated work/potential energy expression (Us=12kx2U_s = \frac{1}{2}kx^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Spring Potential Energy Formula
  • Elastic potential energy stored in an ideal spring is Us=12kx2U_s = \frac{1}{2}kx^2, derived from the integral ∫0xkx′ dx′\int_0^x kx'\,dx'.

  • Always verify that both elastic and kinetic energy terms carry their prefactor of 12\frac{1}{2} before simplifying.

Total Mechanical Energy Conservation
  • Ei=Ef  ⟹  12kx2+mgh=12mvf2E_i = E_f \implies \frac{1}{2}kx^2 + mgh = \frac{1}{2}mv_f^2.

  • Consider writing the full energy conservation from start to floor directly to solve for vfv_f in a single unified step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up conservation of mechanical energy on the horizontal table: 12kx2=12mv02\frac{1}{2}kx^2 = \frac{1}{2}mv_0^2.

  2. Cancel 12\frac{1}{2} on both sides to obtain v02=kx2m=450×(0.120)20.200=32.4 m2/s2v_0^2 = \frac{kx^2}{m} = \frac{450 \times (0.120)^2}{0.200} = 32.4\text{ m}^2/\text{s}^2.

  3. Substitute v02=32.4 m2/s2v_0^2 = 32.4\text{ m}^2/\text{s}^2 into your kinematic relation: vf=32.4+2(9.80)(1.25)=32.4+24.5=56.9≈7.54 m/sv_f = \sqrt{32.4 + 2(9.80)(1.25)} = \sqrt{32.4 + 24.5} = \sqrt{56.9} \approx 7.54\text{ m/s}.

Final answer

7.54 m/s

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the work integral W=∫F dxW = \int F\,dx to reinforce why linear restoring forces produce a quadratic potential energy with a coefficient of 12\frac{1}{2}.

  • Practice checking dimensions and leading coefficients whenever equating energy terms.

Lock it in

Similar question

01

A 0.50 kg0.50\text{ kg} block slides off a horizontal table at height h=0.80 mh = 0.80\text{ m} with an initial speed of v0=3.0 m/sv_0 = 3.0\text{ m/s}. Using g=9.8 m/s2g = 9.8\text{ m/s}^2, find its impact speed on the floor.

Answer

vf=v02+2gh=3.02+2(9.8)(0.80)=9.0+15.68=24.68≈4.97 m/sv_f = \sqrt{v_0^2 + 2gh} = \sqrt{3.0^2 + 2(9.8)(0.80)} = \sqrt{9.0 + 15.68} = \sqrt{24.68} \approx 4.97\text{ m/s}.

02

A toy dart of mass m=0.050 kgm = 0.050\text{ kg} is compressed by x=0.080 mx = 0.080\text{ m} against a horizontal spring (k=250 N/mk = 250\text{ N/m}) atop a cliff of height h=4.0 mh = 4.0\text{ m}. Neglecting friction and air resistance, calculate its speed just before hitting the ground below (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

Etotal=12kx2+mgh=12(250)(0.080)2+(0.050)(9.80)(4.0)=0.80 J+1.96 J=2.76 JE_{\text{total}} = \frac{1}{2}kx^2 + mgh = \frac{1}{2}(250)(0.080)^2 + (0.050)(9.80)(4.0) = 0.80\text{ J} + 1.96\text{ J} = 2.76\text{ J}. Then 12mvf2=2.76 J  ⟹  vf=2(2.76)0.050=110.4≈10.5 m/s\frac{1}{2}mv_f^2 = 2.76\text{ J} \implies v_f = \sqrt{\frac{2(2.76)}{0.050}} = \sqrt{110.4} \approx 10.5\text{ m/s}.

03

A small sphere of mass mm is launched horizontally from a platform of height HH by a spring with stiffness kk compressed by Δx\Delta x. It strikes the ground at an angle of 45∘45^\circ to the horizontal. Derive an expression for the platform height HH in terms of kk, Δx\Delta x, mm, and gg.

Answer

At a 45∘45^\circ impact angle, ∣vx∣=∣vy∣|v_x| = |v_y|. From spring decompression, vx=Δxkmv_x = \Delta x\sqrt{\frac{k}{m}}. From free fall, vy2=2gHv_y^2 = 2gH. Setting vx2=vy2v_x^2 = v_y^2 yields k(Δx)2m=2gH  ⟹  H=k(Δx)22mg\frac{k(\Delta x)^2}{m} = 2gH \implies H = \frac{k(\Delta x)^2}{2mg}.

Loading workspace…