Resources

A small metallic satellite orbiter of mass m=450 kgm = 450\text{ kg} is in a stable circular orbit around an airless planet at an altitude where the magnitude of the gravitational force exerted on it is Fg=1800 NF_g = 1800\text{ N}. A propulsion engineer wishes to find the orbital speed vv of the satellite directly from the orbital radius r=6.40×106 mr = 6.40\times 10^6\text{ m} without calculating the planet's mass. Identify the applicable physical law relating net force to circular acceleration, write its mathematical form solving for vv, and calculate the orbital speed vv.

Answer and steps

Final answer

Newton's Second Law for Uniform Circular Motion; ΣFc=mv2r  ⟹  v=Fcrm\Sigma F_c = \frac{m v^2}{r} \implies v = \sqrt{\frac{F_c r}{m}}; v=5.06×103 m/sv = 5.06\times 10^3\text{ m/s}.

Steps

01

Identify the Applicable Physical Law

An object moving in a circle of radius rr at constant speed vv experiences a centripetal acceleration directed toward the center of the circular path: ac=v2ra_c = \frac{v^2}{r}

According to Newton's Second Law of Motion, the net force ΣFc\Sigma F_c acting radially inward must equal the product of the mass and its centripetal acceleration: ΣFc=mac=mv2r\Sigma F_c = m a_c = \frac{m v^2}{r}

For a satellite in a circular orbit around an airless planet, gravity is the sole force providing this centripetal acceleration: Fc=FgF_c = F_g


02

Derive the Expression for Orbital Speed vv

Equating the centripetal force expression directly to the given gravitational force: Fg=mv2rF_g = \frac{m v^2}{r}

To solve for the orbital speed vv, isolate v2v^2 by multiplying both sides by rr and dividing by mm: v2=Fgrmv^2 = \frac{F_g r}{m}

Taking the positive square root gives: v=Fgrmv = \sqrt{\frac{F_g r}{m}}

Pitfall to avoid: There is no need to introduce Newton's Law of Universal Gravitation (Fg=GMmr2F_g = \frac{G M m}{r^2}) to solve for the planet's mass MM, as the actual gravitational force FgF_g acting on the satellite is already provided.


03

Calculate the Numerical Value of vv

Substitute the given values into the derived formula:

  • Fg=1800 NF_g = 1800\text{ N}
  • r=6.40×106 mr = 6.40\times 10^6\text{ m}
  • m=450 kgm = 450\text{ kg}

v=1800 N⋅6.40×106 m450 kgv = \sqrt{\frac{1800\text{ N} \cdot 6.40\times 10^6\text{ m}}{450\text{ kg}}}

Simplify the fraction inside the radical: 1800450=4\frac{1800}{450} = 4

v=4⋅6.40×106 m2/s2=25.6×106 m2/s2v = \sqrt{4 \cdot 6.40\times 10^6\text{ m}^2/\text{s}^2} = \sqrt{25.6\times 10^6\text{ m}^2/\text{s}^2}

v≈5.06×103 m/sv \approx 5.06\times 10^3\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root when solving for speed from v² in the centripetal force formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton’s second law: Fnet=m⋅ac  ⟹  Fg=m⋅v2r\text{Newton's second law: } F_{\text{net}} = m \cdot a_c \implies F_g = m \cdot \frac{v^2}{r}

  2. Step 2

    v=Fg⋅rmv = F_g \cdot \frac{r}{m}

    Correct

    v2=Fgrm  ⟹  v=Fgrmv^2 = \frac{F_g r}{m} \implies v = \sqrt{\frac{F_g r}{m}}

    When rearranging Fg=mv2rF_g = \frac{m v^2}{r}, isolating the velocity term yields v2=Fgrmv^2 = \frac{F_g r}{m}. You dropped the exponent of 22 on vv and forgot to take the square root.

  3. Step 3

    v=1800⋅6.40×106450=2.56×107 m/sv = \frac{1800 \cdot 6.40 \times 10^6}{450} = 2.56 \times 10^7\text{ m/s}

    Correct

    v=1800⋅6.40×106450=2.56×107≈5.06×103 m/sv = \sqrt{\frac{1800 \cdot 6.40 \times 10^6}{450}} = \sqrt{2.56 \times 10^7} \approx 5.06 \times 10^3\text{ m/s}

    Your arithmetic evaluation of Fgrm=2.56×107 m2/s2\frac{F_g r}{m} = 2.56 \times 10^7\text{ m}^2/\text{s}^2 was mathematically correct, but because you solved for v2v^2 instead of vv, the numerical result and units represent v2v^2 rather than speed vv.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's second law as the governing physical law relating net radial force to circular acceleration.

You accurately substituted ac=v2ra_c = \frac{v^2}{r} and recognized that gravitational force provides the required centripetal force.

You correctly substituted the given values and evaluated the arithmetic quotient.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in kinetic/centripetal formula

You dropped the exponent 22 when rearranging for vv, treating v2v^2 as vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Incomplete inverse-operation tracking during algebraic rearrangement: when solving an equation containing an exponential power like v2v^2, moving the coefficients leaves v2v^2 on one side, which requires taking the principal square root as the final inverse operation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check powers during symbolic rearrangement
  • If a target variable appears as v2v^2, isolating it yields v2=expressionv^2 = \text{expression}, which requires v=expressionv = \sqrt{\text{expression}}.

  • Always write the intermediate step with the exponent intact (e.g., v2=…v^2 = \dots) before taking the square root.

Dimensional analysis sanity check
  • The quantity Frm\frac{F r}{m} has SI units of N⋅mkg=(kg⋅m/s2)⋅mkg=m2/s2\frac{\text{N}\cdot\text{m}}{\text{kg}} = \frac{(\text{kg}\cdot\text{m/s}^2)\cdot\text{m}}{\text{kg}} = \text{m}^2/\text{s}^2.

  • Verify that your expression matches speed dimensions (m/s)(\text{m/s}); here, units of m2/s2\text{m}^2/\text{s}^2 signal that a square root is still required.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by rr and divide by mm: v2=Fgrmv^2 = \frac{F_g r}{m}

  2. Take the principal square root of both sides: v=Fgrmv = \sqrt{\frac{F_g r}{m}}

  3. Substitute the given numerical values: v=1800⋅6.40×106450=4⋅6.40×106v = \sqrt{\frac{1800 \cdot 6.40 \times 10^6}{450}} = \sqrt{4 \cdot 6.40 \times 10^6}

  4. Calculate the final value: v=2.56×107≈5.06×103 m/sv = \sqrt{2.56 \times 10^7} \approx 5.06 \times 10^3\text{ m/s}

Final answer

v≈5.06×103 m/sv \approx 5.06 \times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating squared variables in common physics equations such as Ek=12mv2E_k = \frac{1}{2}m v^2 and ac=v2ra_c = \frac{v^2}{r}.

  • Perform a quick unit check on your symbolic answer before plugging in numbers to confirm the result has dimensions of m/s\text{m/s}.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the orbital radius in the centripetal acceleration denominator with r², treating the formula as if it were an inverse-square law for acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Newton's second law: Fnet=m⋅acF_{\text{net}} = m \cdot a_c

  2. Step 2

    Fg=m⋅v2r2F_g = m \cdot \frac{v^2}{r^2}

    Correct

    Fg=m⋅v2rF_g = m \cdot \frac{v^2}{r}

    Centripetal acceleration is ac=v2ra_c = \frac{v^2}{r}, with rr raised to the first power. You squared the orbital radius in the denominator, likely confusing the kinematics formula for centripetal acceleration with the inverse-square law of universal gravitation.

  3. Step 3

    v=Fg⋅r2mv = \sqrt{\frac{F_g \cdot r^2}{m}}

    Correct

    v=Fgrmv = \sqrt{\frac{F_g r}{m}}

    Your algebraic isolation of vv followed correctly from your previous formula, but it inherited the incorrect factor of r2r^2.

  4. Step 4

    v=1800⋅(6.40×106)2450  ⟹  v=1.28×107 m/sv = \sqrt{\frac{1800 \cdot (6.40 \times 10^6)^2}{450}} \implies v = 1.28 \times 10^7\text{ m/s}

    Correct

    v=1800⋅6.40×106450≈5.06×103 m/sv = \sqrt{\frac{1800 \cdot 6.40 \times 10^6}{450}} \approx 5.06 \times 10^3\text{ m/s}

    Your arithmetic was carried out correctly for your expression, but because of the squared radius, the calculated speed is several orders of magnitude too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's Second Law as the governing physical law.

You recognized that gravity provides the required centripetal force for the circular orbit.

You executed clean algebraic isolation and correct arithmetic on the equation you set up.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Centripetal acceleration formula error

You squared the orbital radius rr in the denominator of the centripetal acceleration formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the kinematic formula for centripetal acceleration (ac=v2ra_c = \frac{v^2}{r}) with the inverse-square form found in Newton's Law of Universal Gravitation (Fg=GMmr2F_g = \frac{G M m}{r^2}). Dimensional analysis confirms that v2r\frac{v^2}{r} has units of m/s2\text{m/s}^2, whereas v2r2\frac{v^2}{r^2} has units of s−2\text{s}^{-2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Centripetal Acceleration Dimensions
  • Centripetal acceleration must have standard acceleration units: [ac]=[v]2[r]=(m/s)2m=m/s2[a_c] = \frac{[v]^2}{[r]} = \frac{(\text{m/s})^2}{\text{m}} = \text{m/s}^2.

  • Always verify that your acceleration expression has a single power of length in the denominator, giving ac=v2ra_c = \frac{v^2}{r}.

Distinguish Net Force Definition from Specific Force Laws
  • ΣFc=mv2r\Sigma F_c = m \frac{v^2}{r} is a kinematic requirement of circular motion, whereas inverse-square laws (like Fg=GMmr2F_g = \frac{G M m}{r^2}) describe specific interactions.

  • When the gravitational force FgF_g is already provided as a numerical value, equate FgF_g directly to mv2r\frac{m v^2}{r} without introducing GG, MM, or extra factors of rr.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the net centripetal force equal to mass times centripetal acceleration: Fg=mv2rF_g = \frac{m v^2}{r}.

  2. Multiply both sides by rr and divide by mm: v2=Fgrmv^2 = \frac{F_g r}{m}.

  3. Take the positive square root: v=Fgrmv = \sqrt{\frac{F_g r}{m}}.

  4. Substitute the given numerical values: v=1800⋅6.40×106450=4⋅6.40×106=2.56×107≈5.06×103 m/sv = \sqrt{\frac{1800 \cdot 6.40 \times 10^6}{450}} = \sqrt{4 \cdot 6.40 \times 10^6} = \sqrt{2.56 \times 10^7} \approx 5.06 \times 10^3\text{ m/s}.

Final answer

Newton's Second Law for Uniform Circular Motion; Fg=mv2r  ⟹  v=FgrmF_g = \frac{m v^2}{r} \implies v = \sqrt{\frac{F_g r}{m}}; v≈5.06×103 m/sv \approx 5.06 \times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental kinematic relation ac=v2r=ω2ra_c = \frac{v^2}{r} = \omega^2 r.

  • Use quick unit checking whenever you write an acceleration formula to ensure the denominator is meters (first power), not meters squared.

  • Practice separating the kinematic requirement (Fnet=macF_{\text{net}} = m a_c) from the physical cause of the force (such as gravity, tension, or friction).

OverviewACEpath Teacher's Diagnosis

03 The student inverts the mass and force when rearranging the equation, multiplying by mass and dividing by force instead of the reverse.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Newton's second law of motion: F=m∗a  ⟹  Fg=m∗v2rF = m * a \implies F_g = m * \frac{v^2}{r}

  2. Step 2

    v=m∗rFgv = \sqrt{\frac{m * r}{F_g}}

    Correct

    v=Fgrmv = \sqrt{\frac{F_g r}{m}}

    When rearranging Fg=mv2rF_g = \frac{m v^2}{r} for v2v^2, multiplying both sides by rr gives Fgr=mv2F_g r = m v^2. Dividing both sides by mm yields v2=Fgrmv^2 = \frac{F_g r}{m}, so FgF_g must be in the numerator and mm in the denominator.

  3. Step 3

    v=450∗6.40×1061800  ⟹  v=1.60×106  ⟹  v=1265 m/sv = \sqrt{\frac{450 * 6.40 \times 10^6}{1800}} \implies v = \sqrt{1.60 \times 10^6} \implies v = 1265\text{ m/s}

    Correct

    v=1800⋅6.40×106450=25.6×106≈5.06×103 m/sv = \sqrt{\frac{1800 \cdot 6.40 \times 10^6}{450}} = \sqrt{25.6 \times 10^6} \approx 5.06 \times 10^3\text{ m/s}

    Your arithmetic was carried out accurately based on your rearranged formula, but the result is incorrect due to the inverted variables from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified Newton's second law as the governing physical principle.

You correctly related gravitational force to mass and centripetal acceleration.

You evaluated your square root expression cleanly with correct units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Variable Inversion in Algebraic Rearrangement

You accidentally placed mass in the numerator and force in the denominator when isolating velocity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You moved terms across the equals sign in a single rapid step without tracking inverse operations, multiplying by mm and dividing by FgF_g rather than dividing by mm to clear the coefficient of v2v^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the squared variable step by step
  • To clear a factor multiplied by a variable, divide both sides by that factor.

  • From Fg=mv2rF_g = \frac{m v^2}{r}, multiply by rr to get Fgr=mv2F_g r = m v^2, then divide by mm to get v2=Fgrmv^2 = \frac{F_g r}{m}.

Perform a quick unit check
  • The units inside the radical must simplify to m2/s2\text{m}^2/\text{s}^2 so that velocity has units of m/s\text{m/s}.

  • Check: N⋅mkg=(kg⋅m/s2)⋅mkg=m2s2\frac{\text{N}\cdot\text{m}}{\text{kg}} = \frac{(\text{kg}\cdot\text{m}/\text{s}^2)\cdot\text{m}}{\text{kg}} = \frac{\text{m}^2}{\text{s}^2}, whereas kg⋅mN=s2\frac{\text{kg}\cdot\text{m}}{\text{N}} = \text{s}^2, which reveals the inversion immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by rr: Fgr=mv2F_g r = m v^2

  2. Divide both sides by mm: v2=Fgrmv^2 = \frac{F_g r}{m}

  3. Take the positive square root: v=Fgrmv = \sqrt{\frac{F_g r}{m}}

  4. Substitute the given numerical values: v=1800 N⋅6.40×106 m450 kgv = \sqrt{\frac{1800\text{ N} \cdot 6.40 \times 10^6\text{ m}}{450\text{ kg}}}

  5. Simplify the fraction under the square root: 1800450=4\frac{1800}{450} = 4, so v=4⋅6.40×106=2.56×107=5.06×103 m/sv = \sqrt{4 \cdot 6.40 \times 10^6} = \sqrt{2.56 \times 10^7} = 5.06 \times 10^3\text{ m/s}

Final answer

v=5.06×103 m/sv = 5.06 \times 10^3\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating target variables by writing out the intermediate multiplication and division steps explicitly.

  • Use dimensional analysis on your derived algebraic formulas before substituting numbers to catch inverted fractions.

Lock it in

Similar question

01

A 2.0 kg2.0\text{ kg} object moves in a horizontal circle of radius 0.50 m0.50\text{ m} attached to a string under a tension of 16 N16\text{ N}. Find the speed vv of the object.

Answer

v=2.0 m/sv = 2.0\text{ m/s}. Using T=mv2rT = \frac{m v^2}{r}, isolate v=Trm=16⋅0.502.0=4.0=2.0 m/sv = \sqrt{\frac{T r}{m}} = \sqrt{\frac{16 \cdot 0.50}{2.0}} = \sqrt{4.0} = 2.0\text{ m/s}.

02

A satellite of mass m=1200 kgm = 1200\text{ kg} orbits an asteroid at radius r=5.0×105 mr = 5.0 \times 10^5\text{ m} where gravity exerts a force of Fg=240 NF_g = 240\text{ N}. Calculate the satellite's orbital speed vv.

Answer

v=316 m/sv = 316\text{ m/s} (or 3.2×102 m/s3.2 \times 10^2\text{ m/s}). Set Fg=mv2r  ⟹  v=Fgrm=240⋅5.0×1051200=1.0×105≈316 m/sF_g = \frac{m v^2}{r} \implies v = \sqrt{\frac{F_g r}{m}} = \sqrt{\frac{240 \cdot 5.0 \times 10^5}{1200}} = \sqrt{1.0 \times 10^5} \approx 316\text{ m/s}.

03

A 1500 kg1500\text{ kg} car travels around a flat, unbanked curve of radius 80 m80\text{ m}. The maximum static friction force the road can provide is 7200 N7200\text{ N}. Determine the maximum speed vmaxv_{\text{max}} at which the car can round the curve without skidding.

Answer

vmax=19.6 m/sv_{\text{max}} = 19.6\text{ m/s} (or ≈20 m/s\approx 20\text{ m/s}). Setting fmax=mv2r  ⟹  v=fmaxrm=7200⋅801500=384≈19.6 m/sf_{\text{max}} = \frac{m v^2}{r} \implies v = \sqrt{\frac{f_{\text{max}} r}{m}} = \sqrt{\frac{7200 \cdot 80}{1500}} = \sqrt{384} \approx 19.6\text{ m/s}.

Loading workspace…