Resources
An automated inspection rover operates on a flat factory floor. Starting from position , the rover moves due north (-direction), then turns and moves due east (-direction) to reach its service checkpoint. Determine: (a) the total path distance traveled by the rover, (b) the magnitude of the displacement vector , and (c) the direction angle of the displacement vector measured counterclockwise from the positive -axis (due east).
Answer and steps
Final answer
(a) Total distance: ; (b) Magnitude of displacement: ; (c) Direction angle: north of east (or relative to the -axis).
Steps
Calculate the Total Distance Traveled
Distance () is a scalar quantity that measures the total length of the actual path traveled, irrespective of direction.
The rover's journey consists of two perpendicular segments:
- Moving north:
- Moving east:
Summing the lengths of both segments:
Determine the Displacement Vector and its Magnitude
Displacement () is a vector representing the straight-line change in position from the initial point to the final point:
Setting the origin at the start:
- Along the -axis (east):
- Along the -axis (north):
Thus, the displacement vector is:
Apply the Pythagorean theorem to find the magnitude :
Find the Direction Angle of the Displacement Vector
The direction angle is measured counterclockwise from the positive -axis (due east) toward the positive -axis (due north). Using the tangent function:
Taking the inverse tangent:
Therefore, the displacement vector has a magnitude of directed at north of east (or counterclockwise from the -axis).
Common Pitfall: Do not confuse distance with displacement. Distance is path-dependent and scalar (), whereas displacement depends solely on the initial and final endpoints and has both magnitude and direction ( at ).
Typical errors
01 The student confuses the scalar distance traveled with the magnitude of the displacement vector, repeating the total distance value for the displacement magnitude.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Displacement measures the straight-line change from start to finish rather than the total path walked. Because the two legs are perpendicular, the magnitude of displacement is the hypotenuse: .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the total path distance correctly by summing the lengths of both motion legs.
You correctly identified the components and to find the correct displacement direction angle .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated distance and displacement magnitude as identical quantities, overlooking that displacement is the straight-line vector shortcut between the initial and final positions.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distance vs. Displacement Magnitude
Total distance is the scalar sum of all path segments (). Displacement is a vector whose magnitude is the straight-line distance, which satisfies .
Always treat perpendicular movements as legs of a right triangle and compute using the Pythagorean theorem rather than setting it equal to .
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the displacement vector in component form: .
Compute its magnitude using the Pythagorean theorem: .
(a) ; (b) ; (c) north of east
02 The student inverts the numerator and denominator in the tangent ratio, computing arctan(Δx / Δy) instead of arctan(Δy / Δx), which yields the angle from north rather than from the positive x-axis.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
For an angle measured relative to the positive -axis (east), the side opposite to is along the -axis () and the adjacent side is along the -axis (). Thus, the standard ratio is .
- Step 4Correct
Because the inverted ratio from the previous step carried through, you obtained (the complementary angle, measured east of north) rather than north of east.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly distinguished scalar distance as the sum of path lengths.
You set up and evaluated the vector magnitude using the Pythagorean theorem with complete accuracy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of when solving for the angle from the positive -axis.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisInverting the rise-over-run relationship in right-triangle trigonometry. In a standard Cartesian coordinate system, the direction angle from the -axis is defined by . Setting calculates the angle relative to the -axis (north) instead of the -axis (east).
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Axis and SOH-CAH-TOA
For any direction angle measured from the horizontal axis (-axis), the vertical component is the opposite side and the horizontal component is the adjacent side: .
Always sketch the right triangle with its base along the reference axis before writing the tangent ratio.
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the tangent definition with the angle measured from the horizontal (-axis): .
Substitute the components: .
Compute the inverse tangent: .
(a) , (b) , (c) north of east
03 The student omits squaring the components in the magnitude calculation and directly sums them inside the square root, obtaining √(Δx + Δy) instead of √(Δx² + Δy²).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
To find the magnitude of a 2D vector, each perpendicular component must be squared before adding them together under the square root: , not .
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the total path distance by summing the scalar segments.
You correctly identified the components and .
You used the correct trigonometric relationship to find the displacement direction angle.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set up the square root for the vector magnitude but added the linear values directly instead of squaring each component.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the Pythagorean magnitude formula with the sum of terms under a radical , possibly due to rushing through the formula setup.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Pythagorean theorem form
For perpendicular components, the hypotenuse magnitude satisfies .
Always write the explicit exponent on each component before substituting numerical values.
- Perform a dimensional and triangle check
The magnitude of displacement must be strictly greater than either individual leg and cannot exceed their scalar sum: .
Compare your computed magnitude to the component lengths; since is smaller than both and , it immediately signals a missing squaring step.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the magnitude formula:
Substitute the components and square them:
Sum the squared components and take the root:
(a) ; (b) ; (c)
Lock it in
What is the fundamental difference between distance and displacement ?
Distance is a scalar measuring total path length; displacement is a vector representing the straight-line change from initial to final position.
Similar question
A warehouse drone flies due south and then due west. Find: (a) the total distance traveled , and (b) the magnitude of its displacement .
Answer
(a) . (b) .
A delivery cart moves east, turns around, and moves west along the same straight corridor. Determine: (a) the total distance traveled, and (b) the net displacement vector taking east as the -direction.
Answer
(a) Total distance . (b) Displacement (magnitude directed due east).
An autonomous vehicle travels due east, due north, and then due west. Find: (a) the total distance traveled , (b) the magnitude of the displacement vector , and (c) the direction of the displacement vector.
Answer
(a) . (b) The net position change is and , so . (c) Directed due north ( counterclockwise from the -axis).