Resources

A heavy wooden crate of mass m=42.0 kgm = 42.0\text{ kg} is pulled up a rough incline inclined at an angle α=28.0∘\alpha = 28.0^\circ above the horizontal. A worker applies a constant pulling force F⃗p\vec{F}_p of magnitude 310 N310\text{ N} directed at an angle β=18.0∘\beta = 18.0^\circ above the surface of the incline. The coefficient of kinetic friction between the crate and the incline is μk=0.240\mu_k = 0.240. The crate moves a displacement Δs=6.50 m\Delta s = 6.50\text{ m} up the incline. Adhering strictly to standard thermodynamic and mechanical work conventions (where work done on the system by external forces adds energy), calculate: (a) the work done by the pulling force WpullW_{\text{pull}}, (b) the work done by gravity WgW_g, and (c) the work done by friction WfW_f. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer and steps

Final answer

(a) Wpull=+1.92×103 JW_{\text{pull}} = +1.92 \times 10^3\text{ J}; (b) Wg=−1.27×103 JW_g = -1.27 \times 10^3\text{ J}; (c) Wf=−4.19×102 JW_f = -4.19 \times 10^2\text{ J}

Steps

To find the work done by each force, we use the definition of mechanical work done by a constant force F⃗\vec{F} over a displacement Δs⃗\Delta\vec{s}:

W=F⃗⋅Δs⃗=FΔscos⁡θW = \vec{F} \cdot \Delta\vec{s} = F \Delta s \cos\theta

where θ\theta is the angle between the force vector and the displacement vector. The crate moves a distance Δs=6.50 m\Delta s = 6.50\text{ m} directly up the incline.


Part (a): Work Done by the Pulling Force (WpullW_{\text{pull}})

The pulling force F⃗p\vec{F}_p has a magnitude of 310 N310\text{ N} and makes an angle of β=18.0∘\beta = 18.0^\circ relative to the displacement vector along the incline:

Wpull=FpΔscos⁡βW_{\text{pull}} = F_p \Delta s \cos\beta

Substitute the given values:

Wpull=(310 N)(6.50 m)cos⁡(18.0∘)W_{\text{pull}} = (310\text{ N})(6.50\text{ m})\cos(18.0^\circ) Wpull=(2015 N⋅m)(0.9511)≈+1.92×103 JW_{\text{pull}} = (2015\text{ N}\cdot\text{m})(0.9511) \approx +1.92 \times 10^3\text{ J}

The work is positive because the component of F⃗p\vec{F}_p parallel to the incline points in the direction of motion, adding mechanical energy to the system.


Part (b): Work Done by Gravity (WgW_g)

The force of gravity acts vertically downward with magnitude mgm g. The displacement is directed up the incline at an angle of α=28.0∘\alpha = 28.0^\circ above the horizontal. Thus, the component of gravity opposing the displacement along the incline is mgsin⁡αm g \sin\alpha, directed opposite to the displacement:

Wg=−(mgsin⁡α)ΔsW_g = -(m g \sin\alpha)\Delta s

Substitute the values:

Wg=−(42.0 kg)(9.80 m/s2)(sin⁡28.0∘)(6.50 m)W_g = -(42.0\text{ kg})(9.80\text{ m/s}^2)(\sin 28.0^\circ)(6.50\text{ m}) Wg=−(411.6 N)(0.4695)(6.50 m)≈−1.27×103 JW_g = -(411.6\text{ N})(0.4695)(6.50\text{ m}) \approx -1.27 \times 10^3\text{ J}

The work done by gravity is negative because gravity opposes the upward motion of the crate, removing kinetic energy as the crate gains gravitational potential energy.


Part (c): Work Done by Friction (WfW_f)

Kinetic friction is given by fk=μkFNf_k = \mu_k F_N, where FNF_N is the normal force exerted by the incline on the crate.

  1. Determine the normal force (FNF_N):
    Set up Newton's second law perpendicular to the incline, where the acceleration is zero (ΣF⊥=0\Sigma F_\perp = 0):

    FN+Fpsin⁡β−mgcos⁡α=0F_N + F_p \sin\beta - m g \cos\alpha = 0

    Solving for FNF_N:

    FN=mgcos⁡α−Fpsin⁡βF_N = m g \cos\alpha - F_p \sin\beta FN=(42.0 kg)(9.80 m/s2)cos⁡(28.0∘)−(310 N)sin⁡(18.0∘)F_N = (42.0\text{ kg})(9.80\text{ m/s}^2)\cos(28.0^\circ) - (310\text{ N})\sin(18.0^\circ) FN=(411.6 N)(0.8829)−(310 N)(0.3090)F_N = (411.6\text{ N})(0.8829) - (310\text{ N})(0.3090) FN≈363.4 N−95.8 N≈267.6 NF_N \approx 363.4\text{ N} - 95.8\text{ N} \approx 267.6\text{ N}

    (Pitfall: Do not assume FN=mgcos⁡αF_N = mg\cos\alpha. The upward component of the pulling force lifts the crate slightly, reducing the normal force and consequently the friction force.)

  2. Calculate the friction force (fkf_k):

    fk=μkFN=(0.240)(267.6 N)≈64.2 Nf_k = \mu_k F_N = (0.240)(267.6\text{ N}) \approx 64.2\text{ N}

  3. Calculate the work done by friction (WfW_f):
    Kinetic friction acts directly opposite to the displacement (θ=180∘\theta = 180^\circ):

    Wf=−fkΔs=−(64.2 N)(6.50 m)≈−4.19×102 JW_f = -f_k \Delta s = -(64.2\text{ N})(6.50\text{ m}) \approx -4.19 \times 10^2\text{ J}

The work done by friction is negative, representing mechanical energy dissipated as thermal energy.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the vertical component of the pulling force reduces the normal force exerted by the incline, taking N = m g cos α instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Wpull=FpΔscos⁡β  ⟹  Wpull=(310)(6.50)cos⁡(18.0∘)=1916 JW_{\text{pull}} = F_p \Delta s \cos\beta \implies W_{\text{pull}} = (310)(6.50)\cos(18.0^\circ) = 1916\text{ J}

  2. Step 2

    Wg=−mgΔssin⁡α  ⟹  Wg=−(42.0)(9.80)(6.50)sin⁡(28.0∘)=−1255 JW_g = -m g \Delta s \sin\alpha \implies W_g = -(42.0)(9.80)(6.50)\sin(28.0^\circ) = -1255\text{ J}

  3. Step 3

    N=mgcos⁡α=(42.0)(9.80)cos⁡(28.0∘)=363.4 NN = m g \cos\alpha = (42.0)(9.80)\cos(28.0^\circ) = 363.4\text{ N}

    Correct

    N=mgcos⁡α−Fpsin⁡β=(42.0 kg)(9.80 m/s2)cos⁡(28.0∘)−(310 N)sin⁡(18.0∘)≈267.6 NN = m g \cos\alpha - F_p \sin\beta = (42.0\text{ kg})(9.80\text{ m/s}^2)\cos(28.0^\circ) - (310\text{ N})\sin(18.0^\circ) \approx 267.6\text{ N}

    Because the pulling force is directed at an angle β=18.0∘\beta = 18.0^\circ above the incline surface, it exerts an upward perpendicular component Fpsin⁡βF_p \sin\beta that partially relieves the crate from the ramp, reducing NN.

  4. Step 4

    fk=μkN=(0.240)(363.4)=87.22 N  ⟹  Wf=−fkΔs=−(87.22)(6.50)=−567 Jf_k = \mu_k N = (0.240)(363.4) = 87.22\text{ N} \implies W_f = -f_k \Delta s = -(87.22)(6.50) = -567\text{ J}

    Correct

    fk=μkN=(0.240)(267.6 N)≈64.2 N  ⟹  Wf=−fkΔs=−(64.2 N)(6.50 m)≈−4.19×102 Jf_k = \mu_k N = (0.240)(267.6\text{ N}) \approx 64.2\text{ N} \implies W_f = -f_k \Delta s = -(64.2\text{ N})(6.50\text{ m}) \approx -4.19 \times 10^2\text{ J}

    Your formulas for friction and friction work were set up correctly, but the numerical result is affected by the incorrect value of the normal force from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the dot product formula W=FΔscos⁡θW = F \Delta s \cos\theta to find the positive work done by the worker.

You recognized that gravity opposes upward motion along the incline and correctly applied the negative sign for work done by gravity.

You understood the relationship between the normal force, the coefficient of kinetic friction, and the opposing work done by friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equilibrium perpendicular to incline missing force component

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed the normal force on an incline is always given by N=mgcos⁡αN = mg\cos\alpha, overlooking that an applied force acting at an angle to the surface has a perpendicular component that alters the normal force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Equilibrium
  • For an object that does not accelerate perpendicular to the surface, the sum of all perpendicular forces must equal zero: ∑F⊥=0\sum F_\perp = 0.

  • Always sketch a free-body diagram and include every perpendicular force component (NN, mgcos⁡αmg\cos\alpha, and any applied force component Fsin⁡βF\sin\beta) before solving for NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up equilibrium perpendicular to the incline: ∑F⊥=N+Fpsin⁡β−mgcos⁡α=0\sum F_\perp = N + F_p \sin\beta - mg\cos\alpha = 0.

  2. Solve for the normal force: N=mgcos⁡α−Fpsin⁡β=(42.0)(9.80)cos⁡(28.0∘)−310sin⁡(18.0∘)=363.4 N−95.8 N≈267.6 NN = mg\cos\alpha - F_p \sin\beta = (42.0)(9.80)\cos(28.0^\circ) - 310\sin(18.0^\circ) = 363.4\text{ N} - 95.8\text{ N} \approx 267.6\text{ N}.

  3. Compute the kinetic friction force: fk=μkN=(0.240)(267.6 N)≈64.2 Nf_k = \mu_k N = (0.240)(267.6\text{ N}) \approx 64.2\text{ N}.

  4. Calculate the work done by friction: Wf=−fkΔs=−(64.2 N)(6.50 m)≈−4.19×102 JW_f = -f_k \Delta s = -(64.2\text{ N})(6.50\text{ m}) \approx -4.19 \times 10^2\text{ J}.

Final answer

(a) Wpull=+1.92×103 JW_{\text{pull}} = +1.92 \times 10^3\text{ J}; (b) Wg=−1.27×103 JW_g = -1.27 \times 10^3\text{ J}; (c) Wf=−4.19×102 JW_f = -4.19 \times 10^2\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw full free-body diagrams with both parallel and perpendicular force components explicitly resolved.

  • Practice solving for normal force when external pushes or pulls act at non-zero angles relative to the contact surface.

OverviewACEpath Teacher's Diagnosis

02 The student treats work done by friction as positive, confusing the magnitude of energy dissipated with the sign of work done on the crate.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Wpull=FpΔscos⁡β=(310)(6.50)cos⁡(18.0∘)=1916 JW_{\text{pull}} = F_p \Delta s \cos\beta = (310)(6.50)\cos(18.0^\circ) = 1916\text{ J}

  2. Step 2

    Wg=−mgΔssin⁡α=−(42.0)(9.80)(6.50)sin⁡(28.0∘)=−1255 JW_g = -mg \Delta s \sin\alpha = -(42.0)(9.80)(6.50)\sin(28.0^\circ) = -1255\text{ J}

  3. Step 3

    N=mgcos⁡α−Fpsin⁡β=(42.0)(9.80)cos⁡(28.0∘)−310sin⁡(18.0∘)=267.6 N  ⟹  fk=μkN=(0.240)(267.6)=64.22 NN = mg\cos\alpha - F_p\sin\beta = (42.0)(9.80)\cos(28.0^\circ) - 310\sin(18.0^\circ) = 267.6\text{ N} \implies f_k = \mu_k N = (0.240)(267.6) = 64.22\text{ N}

  4. Step 4

    Wf=fkΔs=(64.22)(6.50)=417 JW_f = f_k \Delta s = (64.22)(6.50) = 417\text{ J}

    Correct

    Wf=f⃗k⋅Δs⃗=fkΔscos⁡(180∘)=−fkΔs≈−4.17×102 JW_f = \vec{f}_k \cdot \Delta\vec{s} = f_k \Delta s \cos(180^\circ) = -f_k \Delta s \approx -4.17 \times 10^2\text{ J}

    Kinetic friction acts down the incline directly opposite to the upward displacement (θ=180∘\theta = 180^\circ). Because cos⁡(180∘)=−1\cos(180^\circ) = -1, friction removes mechanical energy from the crate and does negative work.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the work done by the pulling force using the angle relative to the incline.

You correctly recognized that gravity opposes the upward motion and performs negative work.

You correctly accounted for the upward component of the pull force when finding the normal force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention for friction work

You wrote Wf=fkΔsW_f = f_k \Delta s instead of Wf=−fkΔsW_f = -f_k \Delta s.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the positive thermal energy dissipated by friction (Eth=fkΔsE_{\text{th}} = f_k \Delta s) with the mechanical work done by friction on the object, overlooking that the friction force vector is directed at 180∘180^\circ relative to the displacement vector.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Angle in Work Definition
  • Mechanical work is W=FΔscos⁡θW = F \Delta s \cos\theta, where θ\theta is the angle between the force and displacement vectors.

  • Always explicitly write cos⁡(180∘)=−1\cos(180^\circ) = -1 when a force opposes the direction of travel.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Wf=f⃗k⋅Δs⃗=fkΔscos⁡(180∘)W_f = \vec{f}_k \cdot \Delta\vec{s} = f_k \Delta s \cos(180^\circ)

  2. Wf=−(64.22 N)(6.50 m)≈−4.17×102 JW_f = -(64.22\text{ N})(6.50\text{ m}) \approx -4.17 \times 10^2\text{ J}

Final answer

(a) Wpull=+1.92×103 JW_{\text{pull}} = +1.92 \times 10^3\text{ J}; (b) Wg=−1.26×103 JW_g = -1.26 \times 10^3\text{ J}; (c) Wf=−4.17×102 JW_f = -4.17 \times 10^2\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full dot product W=FΔscos⁡θW = F \Delta s \cos\theta for every individual force before evaluating signs.

  • Remember that kinetic friction opposing motion always does negative work on the moving object because θ=180∘\theta = 180^\circ.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the incline angle with the pulling angle, using the incline angle α instead of β to compute the work done by the pull.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Wpull=FpΔscos⁡α  ⟹  Wpull=(310)(6.50)cos⁡(28.0∘)=1779 JW_{\text{pull}} = F_p \Delta s \cos\alpha \implies W_{\text{pull}} = (310)(6.50)\cos(28.0^\circ) = 1779\text{ J}

    Correct

    Wpull=FpΔscos⁡β=(310 N)(6.50 m)cos⁡(18.0∘)≈+1.92×103 JW_{\text{pull}} = F_p \Delta s \cos\beta = (310\text{ N})(6.50\text{ m})\cos(18.0^\circ) \approx +1.92 \times 10^3\text{ J}

    Mechanical work is defined as W=FΔscos⁡θW = F \Delta s \cos\theta, where θ\theta is the angle between the applied force and the displacement vector. Because the crate moves along the ramp and the force is directed at β=18.0∘\beta = 18.0^\circ relative to the ramp surface, the relevant angle is β\beta, not the incline elevation α\alpha.

  2. Step 2

    Wg=−mgΔssin⁡α=−(42.0)(9.80)(6.50)sin⁡(28.0∘)=−1255 JW_g = -mg \Delta s \sin\alpha = -(42.0)(9.80)(6.50)\sin(28.0^\circ) = -1255\text{ J}

  3. Step 3

    N=mgcos⁡α−Fpsin⁡β=(42.0)(9.80)cos⁡(28.0∘)−310sin⁡(18.0∘)=267.6 N  ⟹  fk=μkN=(0.240)(267.6)=64.22 N  ⟹  Wf=−fkΔs=−(64.22)(6.50)=−417 JN = mg\cos\alpha - F_p\sin\beta = (42.0)(9.80)\cos(28.0^\circ) - 310\sin(18.0^\circ) = 267.6\text{ N} \implies f_k = \mu_k N = (0.240)(267.6) = 64.22\text{ N} \implies W_f = -f_k \Delta s = -(64.22)(6.50) = -417\text{ J}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved forces perpendicular to the incline to find the reduced normal force.

You correctly calculated the negative mechanical work done by gravity opposing the crate's ascent.

You correctly calculated the negative mechanical work dissipated by kinetic friction.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Angle Misalignment in Work Formula

You accidentally swapped the incline angle α\alpha into the pulling force work equation instead of using the force's angle relative to the surface β\beta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the frame angle (incline angle α\alpha relative to horizontal) with the relative vector angle θ\theta between the force F⃗p\vec{F}_p and the displacement vector Δs⃗\Delta\vec{s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Angle Definition for Mechanical Work
  • In W=Fdcos⁡θW = F d \cos\theta, the angle θ\theta is strictly the angle between the force vector F⃗\vec{F} and the displacement vector d⃗\vec{d}.

  • Always draw F⃗\vec{F} and Δs⃗\Delta\vec{s} tail-to-tail to identify the enclosed angle before writing down cos⁡θ\cos\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angle between F⃗p\vec{F}_p and the displacement along the ramp surface: θ=β=18.0∘\theta = \beta = 18.0^\circ.

  2. Evaluate Wpull=FpΔscos⁡β=(310 N)(6.50 m)cos⁡(18.0∘)=(2015 J)(0.9511)≈+1.92×103 JW_{\text{pull}} = F_p \Delta s \cos\beta = (310\text{ N})(6.50\text{ m})\cos(18.0^\circ) = (2015\text{ J})(0.9511) \approx +1.92 \times 10^3\text{ J}.

Final answer

(a) Wpull=+1.92×103 JW_{\text{pull}} = +1.92 \times 10^3\text{ J}; (b) Wg=−1.27×103 JW_g = -1.27 \times 10^3\text{ J}; (c) Wf=−4.19×102 JW_f = -4.19 \times 10^2\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the force vector and displacement vector tail-to-tail whenever multiple angles are given in an incline problem.

  • Label incline angles (relative to horizontal) differently from applied force angles (relative to the plane) in your free-body diagrams to avoid notation mix-ups.

Lock it in

Similar question

01

A 20.0 kg20.0\text{ kg} block is pulled along a flat horizontal floor by a force of 50.0 N50.0\text{ N} directed at 30.0∘30.0^\circ above the horizontal. If μk=0.200\mu_k = 0.200, what is the magnitude of the kinetic friction force on the block? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

fk=34.2 Nf_k = 34.2\text{ N}. Perpendicular equilibrium gives N+Fsin⁡(30∘)−mg=0N + F\sin(30^\circ) - mg = 0, so N=(20.0)(9.80)−50.0sin⁡(30∘)=196−25=171 NN = (20.0)(9.80) - 50.0\sin(30^\circ) = 196 - 25 = 171\text{ N}. Then fk=μkN=(0.200)(171 N)=34.2 Nf_k = \mu_k N = (0.200)(171\text{ N}) = 34.2\text{ N}.

02

A 15.0 kg15.0\text{ kg} sled is pulled up a 20.0∘20.0^\circ incline by a rope parallel to the incline (F=80.0 NF = 80.0\text{ N}). A wind pushes directly downward onto the sled with a constant force of 30.0 N30.0\text{ N}. Find the normal force exerted by the incline on the sled. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

N=166 NN = 166\text{ N}. Perpendicular to the incline, the components opposing NN are the perpendicular gravity component mgcos⁡(20.0∘)mg\cos(20.0^\circ) and the perpendicular wind component (30.0)cos⁡(20.0∘)(30.0)\cos(20.0^\circ). Thus N=(mg+Fwind)cos⁡(20.0∘)=(147+30)cos⁡(20.0∘)=177(0.9397)≈166 NN = (mg + F_{\text{wind}})\cos(20.0^\circ) = (147 + 30)\cos(20.0^\circ) = 177(0.9397) \approx 166\text{ N}.

03

A 50.0 kg50.0\text{ kg} crate is pushed up a 25.0∘25.0^\circ ramp by a worker exerting a force P=400 NP = 400\text{ N} directed at an angle of 15.0∘15.0^\circ below the ramp surface (pushing down and forward into the ramp). If the crate moves 4.00 m4.00\text{ m} up the ramp and μk=0.300\mu_k = 0.300, calculate the total work done by friction WfW_f. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2.)

Answer

Wf=−657 JW_f = -657\text{ J}. Equilibrium perpendicular to the ramp gives N−mgcos⁡(25.0∘)−Psin⁡(15.0∘)=0N - mg\cos(25.0^\circ) - P\sin(15.0^\circ) = 0, so N=(50.0)(9.80)cos⁡(25.0∘)+400sin⁡(15.0∘)=444.1+103.5=547.6 NN = (50.0)(9.80)\cos(25.0^\circ) + 400\sin(15.0^\circ) = 444.1 + 103.5 = 547.6\text{ N}. The friction force is fk=μkN=0.300(547.6 N)=164.3 Nf_k = \mu_k N = 0.300(547.6\text{ N}) = 164.3\text{ N}. Therefore, Wf=−fkd=−(164.3 N)(4.00 m)≈−657 JW_f = -f_k d = -(164.3\text{ N})(4.00\text{ m}) \approx -657\text{ J}.

Loading workspace…