Resources

Two identical solid spheres, Sphere A and Sphere B, are positioned at a height of h=19.6 mh = 19.6\text{ m} above a level test floor. At time t=0 st = 0\text{ s}, Sphere A is released from rest to fall vertically, while Sphere B is simultaneously projected horizontally outward with a speed of v0=35.0 m/sv_0 = 35.0\text{ m/s}. Assuming negligible air resistance and g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) determine the time of flight tAt_A and tBt_B for each sphere to reach the floor, and (b) calculate the magnitude of the final impact velocity (vAv_A and vBv_B) of each sphere just before striking the floor.

Answer and steps

Final answer

(a) tA=tB=2.00 st_A = t_B = 2.00\text{ s} (both spheres strike the ground at the exact same instant); (b) vA=19.6 m/sv_A = 19.6\text{ m/s} and vB=40.1 m/sv_B = 40.1\text{ m/s}

Steps

Part (a): Determine the Time of Flight (tAt_A and tBt_B)

In projectile motion, vertical and horizontal motions are completely independent of each other:

  1. Vertical Motion Analysis: Both spheres start from the same vertical height h=19.6 mh = 19.6\text{ m} with zero initial vertical velocity (v0y=0 m/sv_{0y} = 0\text{ m/s}) and accelerate downward under gravity with g=9.80 m/s2g = 9.80\text{ m/s}^2.
  2. Kinematic Equation for Free Fall: The vertical displacement Δy\Delta y is related to time tt by: Δy=v0yt+12gt2\Delta y = v_{0y}t + \frac{1}{2}gt^2

    Since v0y=0 m/sv_{0y} = 0\text{ m/s} and Δy=h\Delta y = h: h=12gt2  ⟹  t=2hgh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}}

  3. Calculate Time of Flight: Substitute the given values into the formula: tA=tB=2⋅19.6 m9.80 m/s2=4.00 s2=2.00 st_A = t_B = \sqrt{\frac{2 \cdot 19.6\text{ m}}{9.80\text{ m/s}^2}} = \sqrt{4.00\text{ s}^2} = 2.00\text{ s}

Common Pitfall: A frequent misconception is assuming that Sphere B takes longer to fall because it travels a greater total distance along a curved trajectory. However, because gravity acts purely in the vertical direction and there is no vertical component of initial velocity for either sphere, both spheres fall at identical vertical rates and hit the floor at the exact same instant (tA=tB=2.00 st_A = t_B = 2.00\text{ s}).


Part (b): Determine the Magnitude of Impact Velocities (vAv_A and vBv_B)

  1. Vertical Velocity at Impact (vyv_y): Since both spheres fall freely under gravity for t=2.00 st = 2.00\text{ s}: vy=v0y+gt=0+(9.80 m/s2)(2.00 s)=19.6 m/sv_y = v_{0y} + gt = 0 + (9.80\text{ m/s}^2)(2.00\text{ s}) = 19.6\text{ m/s}
  2. Impact Velocity of Sphere A (vAv_A): Sphere A moves strictly in the vertical direction (vAx=0 m/sv_{Ax} = 0\text{ m/s}), so its final speed is purely vertical: vA=vy=19.6 m/sv_A = v_y = 19.6\text{ m/s}
  3. Impact Velocity of Sphere B (vBv_B): In the absence of air resistance, the horizontal velocity remains constant throughout the flight: vBx=v0=35.0 m/sv_{Bx} = v_0 = 35.0\text{ m/s} The vertical velocity just before impact is: vBy=19.6 m/sv_{By} = 19.6\text{ m/s}

    Combine the perpendicular horizontal and vertical velocity components using the Pythagorean theorem: vB=vBx2+vBy2=(35.0 m/s)2+(19.6 m/s)2v_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{(35.0\text{ m/s})^2 + (19.6\text{ m/s})^2} vB=1225+384.16=1609.16≈40.1 m/sv_B = \sqrt{1225 + 384.16} = \sqrt{1609.16} \approx 40.1\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes horizontal velocity increases time of flight by using the initial horizontal speed as an upward or resultant velocity in the 1D kinematic formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tA=2hg=2×19.69.80=2.00 st_A = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \times 19.6}{9.80}} = 2.00\text{ s}

  2. Step 2

    Sphere B has extra speed, so h=v0tB+12gtB2  ⟹  19.6=35.0tB+4.90tB2  ⟹  4.90tB2+35.0tB−19.6=0  ⟹  tB=−35.0+1225+384.169.80≈0.52 sh = v_0 t_B + \frac{1}{2}gt_B^2 \implies 19.6 = 35.0t_B + 4.90t_B^2 \implies 4.90t_B^2 + 35.0t_B - 19.6 = 0 \implies t_B = \frac{-35.0 + \sqrt{1225 + 384.16}}{9.80} \approx 0.52\text{ s}

    Correct

    h=12gtB2  ⟹  tB=2hg=2.00 sh = \frac{1}{2}gt_B^2 \implies t_B = \sqrt{\frac{2h}{g}} = 2.00\text{ s}

    You substituted the horizontal launch speed v0=35.0 m/sv_0 = 35.0\text{ m/s} into the vertical kinematic equation as if it were a downward vertical speed. Because Sphere B is launched purely horizontally, its initial vertical velocity is v0y=0 m/sv_{0y} = 0\text{ m/s}, so tB=tA=2.00 st_B = t_A = 2.00\text{ s}.

  3. Step 3

    vA=gtA=9.80×2.00=19.6 m/sv_A = gt_A = 9.80 \times 2.00 = 19.6\text{ m/s}

  4. Step 4

    vBy=35.0+9.80×0.52=40.1 m/s  ⟹  vB=35.02+40.12≈53.2 m/sv_{By} = 35.0 + 9.80 \times 0.52 = 40.1\text{ m/s} \implies v_B = \sqrt{35.0^2 + 40.1^2} \approx 53.2\text{ m/s}

    Correct

    vBy=gtB=19.6 m/s  ⟹  vB=vBx2+vBy2=35.02+19.62≈40.1 m/sv_{By} = gt_B = 19.6\text{ m/s} \implies v_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{35.0^2 + 19.6^2} \approx 40.1\text{ m/s}

    Your vector combination method using the Pythagorean theorem was completely sound, but the numerical result was affected by the incorrect vertical velocity component from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the vertical free-fall formula to find tA=2.00 st_A = 2.00\text{ s}.

You calculated the final speed of Sphere A accurately.

You correctly recognized that the magnitude of Sphere B's total velocity is found by combining perpendicular components with the Pythagorean theorem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity Component Mixing in Projectile Motion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the horizontal launch speed with initial vertical velocity in the vertical kinematic equation, overlooking the fundamental principle that horizontal and vertical motions are strictly independent.

REASONING PATH
Your ACEpath teacher’s suggested approach
Independence of Motion
  • Perpendicular components of motion (xx and yy) do not affect each other. Gravity acts exclusively in the vertical direction (ay=ga_y = g, ax=0a_x = 0).

  • Always decompose the initial velocity into v0x=v0cos⁡θv_{0x} = v_0 \cos\theta and v0y=v0sin⁡θv_{0y} = v_0 \sin\theta. For a purely horizontal launch, v0y=0 m/sv_{0y} = 0\text{ m/s}.

Vertical Fall Time
  • Any object launched horizontally from rest vertically takes time t=2h/gt = \sqrt{2h/g} to hit the ground, regardless of its horizontal speed.

  • Use h=12gt2h = \frac{1}{2}gt^2 whenever an object is launched horizontally from height hh.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the vertical initial velocity to v0y=0 m/sv_{0y} = 0\text{ m/s} for Sphere B.

  2. Solve for the vertical time of flight: tB=2hg=2(19.6 m)9.80 m/s2=2.00 st_B = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(19.6\text{ m})}{9.80\text{ m/s}^2}} = 2.00\text{ s}.

  3. Determine the vertical impact speed: vBy=gtB=(9.80 m/s2)(2.00 s)=19.6 m/sv_{By} = gt_B = (9.80\text{ m/s}^2)(2.00\text{ s}) = 19.6\text{ m/s}.

  4. Combine with the constant horizontal speed: vB=vBx2+vBy2=(35.0 m/s)2+(19.6 m/s)2≈40.1 m/sv_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{(35.0\text{ m/s})^2 + (19.6\text{ m/s})^2} \approx 40.1\text{ m/s}.

Final answer

(a) tA=tB=2.00 st_A = t_B = 2.00\text{ s}; (b) vA=19.6 m/sv_A = 19.6\text{ m/s} and vB=40.1 m/sv_B = 40.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the decomposition of vectors into orthogonal xx and yy axes before setting up kinematic equations.

  • Practice separating horizontal equations (x=vxtx = v_x t) from vertical equations (y=v0yt+12ayt2y = v_{0y}t + \frac{1}{2}a_y t^2).

  • Complete the targeted flashcards and practice problems below to master projectile motion independence.

OverviewACEpath Teacher's Diagnosis

02 The student computes the impact speed of Sphere B by directly adding the magnitudes of the horizontal and vertical velocities rather than taking the vector resultant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tA=2×19.69.80=2.00 s  ⟹  tB=tA=2.00 st_A = \sqrt{\frac{2 \times 19.6}{9.80}} = 2.00\text{ s} \implies t_B = t_A = 2.00\text{ s}

  2. Step 2

    vA=gtA=9.80×2.00=19.6 m/sv_A = gt_A = 9.80 \times 2.00 = 19.6\text{ m/s}

  3. Step 3

    vBy=gtB=9.80×2.00=19.6 m/s  ⟹  vBx=35.0 m/sv_{By} = gt_B = 9.80 \times 2.00 = 19.6\text{ m/s} \implies v_{Bx} = 35.0\text{ m/s}

  4. Step 4

    vB=vBx+vBy=35.0+19.6=54.6 m/sv_B = v_{Bx} + v_{By} = 35.0 + 19.6 = 54.6\text{ m/s}

    Correct

    vB=vBx2+vBy2=35.02+19.62≈40.1 m/sv_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{35.0^2 + 19.6^2} \approx 40.1\text{ m/s}

    Because the horizontal and vertical velocity vectors are perpendicular to each other, their combined magnitude must be calculated using the Pythagorean theorem, v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}, rather than scalar addition.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the independence of horizontal and vertical motions to find that both spheres land at the same time.

You accurately calculated the vertical impact speed for Sphere A and the vertical component for Sphere B.

You correctly identified that the horizontal velocity of Sphere B remains constant at 35.0 m/s35.0\text{ m/s} throughout the flight.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar addition of perpendicular vector components

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated perpendicular velocity vectors as collinear scalar values by calculating v=vx+vyv = v_x + v_y instead of computing the vector magnitude via v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Vector Magnitude from Perpendicular Components
  • When two velocity components vxv_x and vyv_y are mutually perpendicular, their resultant speed is given by the hypotenuse: v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

  • Always sketch the right triangle formed by vxv_x and vyv_y to remind yourself to use the Pythagorean theorem rather than simple addition.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that v⃗Bx\vec{v}_{Bx} points horizontally and v⃗By\vec{v}_{By} points downward at a 90∘90^\circ angle.

  2. Apply the Pythagorean theorem to find the magnitude of the resultant velocity vector: vB=vBx2+vBy2v_B = \sqrt{v_{Bx}^2 + v_{By}^2}.

  3. Substitute the values: vB=(35.0 m/s)2+(19.6 m/s)2=1225+384.16=1609.16≈40.1 m/sv_B = \sqrt{(35.0\text{ m/s})^2 + (19.6\text{ m/s})^2} = \sqrt{1225 + 384.16} = \sqrt{1609.16} \approx 40.1\text{ m/s}.

Final answer

(a) tA=tB=2.00 st_A = t_B = 2.00\text{ s}; (b) vA=19.6 m/sv_A = 19.6\text{ m/s} and vB=40.1 m/sv_B = 40.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector addition for mutually perpendicular components (xx and yy).

  • Practice setting up right-triangle velocity vector diagrams just before ground impact.

OverviewACEpath Teacher's Diagnosis

03 The student neglects the horizontal component of velocity when determining the impact speed of Sphere B, assuming both spheres land with the same vertical speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    tA=2hg=39.29.80=2.00 st_A = \sqrt{\frac{2h}{g}} = \sqrt{\frac{39.2}{9.80}} = 2.00\text{ s}

  2. Step 2

    tB=2hg=2.00 st_B = \sqrt{\frac{2h}{g}} = 2.00\text{ s}

  3. Step 3

    vA=gtA=9.80×2.00=19.6 m/sv_A = gt_A = 9.80 \times 2.00 = 19.6\text{ m/s}

  4. Step 4

    vB=gtB=9.80×2.00=19.6 m/sv_B = gt_B = 9.80 \times 2.00 = 19.6\text{ m/s}

    Correct

    vB=vBx2+vBy2=(35.0 m/s)2+(19.6 m/s)2≈40.1 m/sv_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{(35.0\text{ m/s})^2 + (19.6\text{ m/s})^2} \approx 40.1\text{ m/s}

    The quantity gtB=19.6 m/sgt_B = 19.6\text{ m/s} is only the downward vertical component vByv_{By}. Because Sphere B was launched horizontally with vBx=35.0 m/sv_{Bx} = 35.0\text{ m/s} and experiences no horizontal acceleration, you must combine both orthogonal velocity components using the Pythagorean theorem: vB=vBx2+vBy2v_B = \sqrt{v_{Bx}^2 + v_{By}^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the free-fall equation to find the flight time for both spheres.

You correctly recognized that vertical motion is independent of horizontal motion when determining tBt_B.

You accurately calculated the vertical velocity acquired under gravity over 2.00 s2.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Horizontal Velocity Component at Impact

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total impact velocity of a two-dimensional projectile as equal to its vertical velocity component alone, forgetting that the horizontal velocity remains constant throughout flight and contributes to the total landing speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Deconstruct Velocity Components
  • For 2D projectile motion with negligible air resistance, velocity has two independent components: vx(t)=v0xv_x(t) = v_{0x} (constant) and vy(t)=v0y−gtv_y(t) = v_{0y} - gt.

  • Always list both vxv_x and vyv_y at the point of interest before computing the overall magnitude.

Combine Perpendicular Vectors
  • The magnitude of total velocity is given by the Pythagorean theorem: v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

  • Whenever an object moves in two dimensions, use the vector sum formula rather than taking just one component as the total speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the horizontal velocity component of Sphere B just before impact: vBx=v0=35.0 m/sv_{Bx} = v_0 = 35.0\text{ m/s}.

  2. Identify the vertical velocity component of Sphere B just before impact: vBy=gtB=9.80 m/s2×2.00 s=19.6 m/sv_{By} = gt_B = 9.80\text{ m/s}^2 \times 2.00\text{ s} = 19.6\text{ m/s}.

  3. Combine the perpendicular velocity components using the Pythagorean theorem: vB=vBx2+vBy2=(35.0 m/s)2+(19.6 m/s)2=1225+384.16=1609.16≈40.1 m/sv_B = \sqrt{v_{Bx}^2 + v_{By}^2} = \sqrt{(35.0\text{ m/s})^2 + (19.6\text{ m/s})^2} = \sqrt{1225 + 384.16} = \sqrt{1609.16} \approx 40.1\text{ m/s}.

Final answer

tA=tB=2.00 st_A = t_B = 2.00\text{ s}; vA=19.6 m/sv_A = 19.6\text{ m/s} and vB=40.1 m/sv_B = 40.1\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector addition for perpendicular velocity components in two dimensions.

  • Practice drawing velocity vector triangles (vxv_x, vyv_y, and resultant vv) at the landing point to avoid omitting the horizontal component.

Lock it in

Similar question

01

A stone is kicked horizontally off a 44.1 m44.1\text{ m} tall cliff with a horizontal speed of 15.0 m/s15.0\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and negligible air resistance, find the time it takes to reach the ground.

Answer

t=3.00 st = 3.00\text{ s}. Key steps: Since the stone is kicked horizontally, v0y=0 m/sv_{0y} = 0\text{ m/s}. Use h=12gt2  ⟹  t=2hg=2(44.1)9.80=9.00=3.00 sh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(44.1)}{9.80}} = \sqrt{9.00} = 3.00\text{ s}.

02

A ball rolls horizontally off a flat roof at 12.0 m/s12.0\text{ m/s} and falls for 1.50 s1.50\text{ s} before hitting the ground. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the magnitude of the ball's total velocity just before impact.

Answer

v≈18.9 m/sv \approx 18.9\text{ m/s}. Key steps: Horizontal velocity is constant: vx=12.0 m/sv_x = 12.0\text{ m/s}. Vertical velocity: vy=gt=(9.80 m/s2)(1.50 s)=14.7 m/sv_y = gt = (9.80\text{ m/s}^2)(1.50\text{ s}) = 14.7\text{ m/s}. Total speed: v=vx2+vy2=12.02+14.72=144+216.09=360.09≈18.9 m/sv = \sqrt{v_x^2 + v_y^2} = \sqrt{12.0^2 + 14.7^2} = \sqrt{144 + 216.09} = \sqrt{360.09} \approx 18.9\text{ m/s}.

03

Package A is released from rest from a stationary helicopter at height H=78.4 mH = 78.4\text{ m}. At the same instant and height, Package B is launched horizontally from an airplane traveling at 60.0 m/s60.0\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) show whether both packages reach the ground simultaneously, and (b) find the horizontal distance between them when they strike the ground.

Answer

(a) Yes, tA=tB=4.00 st_A = t_B = 4.00\text{ s}; (b) Δx=240 m\Delta x = 240\text{ m}. Key steps: Both have v0y=0 m/sv_{0y} = 0\text{ m/s}, so t=2(78.4)9.80=4.00 st = \sqrt{\frac{2(78.4)}{9.80}} = 4.00\text{ s}. Package A lands directly below its drop point (xA=0 mx_A = 0\text{ m}), while Package B travels xB=vBxt=(60.0 m/s)(4.00 s)=240 mx_B = v_{Bx}t = (60.0\text{ m/s})(4.00\text{ s}) = 240\text{ m}. Separation distance Δx=240 m\Delta x = 240\text{ m}.

Loading workspace…