Resources
A high-speed electric locomotive travels along a level track against an aerodynamic drag force given by , where . Rolling resistance is negligible. The locomotive operates at a steady initial speed of . A student conjectures that doubling the locomotive's cruising speed to requires doubling the mechanical output power delivered to the wheels (). Evaluate this claim by deriving the power dependence on speed, calculate the actual ratio , and determine the exact mechanical power required at .
Answer and steps
Final answer
The student's claim is incorrect because mechanical power scales with the cube of speed (); , and (or ).
Steps
Derive the Power Dependence on Velocity
For an object moving at a constant velocity , the net force acting on it is zero according to Newton's first law. Therefore, the driving force supplied by the locomotive must exactly balance the opposing aerodynamic drag force :
Mechanical power delivered to overcome a resistance force at a constant velocity is defined as the rate of doing work:
Substituting the expression for the drag force:
Thus, the mechanical power required to overcome aerodynamic drag is directly proportional to the cube of the speed (), not to the speed itself.
Evaluate the Student's Claim and Find the Ratio
The student conjectured that doubling the speed doubles the required power ().
Using the derived cubic relationship, compare the power at speed to that at speed :
Given and :
The student's claim is incorrect. Doubling the cruising speed increases the required power by a factor of , not .
Common Pitfall: A common mistake is confusing force with power. While the drag force scales with the square of the speed (, so the force quadruples), the engine must apply that quadrupled force over twice the distance each second (), leading to a factor of .
Calculate the Mechanical Power at
Substitute and into the power equation:
Typical errors
01 The student confuses force with power by assuming P = F = b v², resulting in a quadratic dependence on speed instead of a cubic one.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set power equal to the drag force expression . Mechanical power delivered to sustain steady speed is defined as work per unit time, which equals force multiplied by velocity ().
- Step 2Correct
Your ratio calculation followed logically from your quadratic relationship, but because power scales with the cube of speed, doubling the velocity increases the required power by a factor of .
- Step 3Correct
(or )
Your arithmetic evaluated accurately, but calculating mechanical power requires .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly realized that power does not have a linear relationship with velocity, so the claim that doubling speed doubles power is false.
You correctly set up the scaling ratio using your assumed velocity dependence and evaluated your arithmetic accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeWriting by treating the resistance force as power.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating force and mechanical power. While overcoming aerodynamic drag requires a driving force that scales as , driving that force at speed requires an additional factor of velocity because , yielding a cubic dependence ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition of Mechanical Power
For an object moving at constant velocity against resistance, .
Always multiply the opposing force by velocity when finding instantaneous or steady-state power.
- Dimensional Consistency Check
Force has units of newtons (), whereas power has units of watts ().
Verify that the units of give force () and multiply by () to get power.
CORRECTED PATH
ACEpath Teacher's DemonstrationThe claim is incorrect (); , and (or ).
02 The student assumes power is directly proportional to speed, accepting the conjecture that doubling speed doubles the required power.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You treated the opposing force as constant, but the problem specifies aerodynamic drag . At constant velocity, , so substituting into yields . Because scales with the cube of velocity, doubling the cruising speed requires times the power, so the student's claim is false.
- Step 2Correct
This ratio followed directly from your assumption that . With the correct cubic relationship , the ratio of mechanical powers is .
- Step 3Correct
Although you used the cubic formula to find , you multiplied by instead of to find . Evaluating directly gives .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled that mechanical power is related to force and velocity by .
You successfully computed the cubic power expression for the initial state, finding .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou assumed the resistance force was independent of speed when deriving the scaling relation between power and speed.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou evaluated by assuming is constant instead of substituting the speed-dependent drag force . In velocity-dependent resistance problems, both the force required to maintain motion and the distance traveled per second increase with speed, leading to a higher-order power dependence ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Substitute Variable Force Expressions First
In power problems where resistance depends on speed, always substitute into before deducing scaling relationships.
Identify whether force depends on speed; if , then power scales as .
- Verify Scaling Exponents for Ratios
If , then scaling the speed by a factor of scales the required power by , not .
For , compute rather than multiplying by .
CORRECTED PATH
ACEpath Teacher's DemonstrationExpress the required driving force at constant cruising speed: .
Substitute this into the power formula: .
Determine the power ratio when doubling speed: .
Calculate at : .
The claim is incorrect (); , and .
03 The student evaluates (v₂ / v₁)³ as 2 × 3 = 6 instead of 2³ = 8 when computing the power ratio, propagating this arithmetic miscalculation to P₂.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, so doubling speed increases power by more than double, making the claim false.
- Step 2Correct
You correctly set up the ratio using the cubic relationship, but you evaluated as instead of multiplying three factors of ().
- Step 3Correct
Your calculation of is entirely correct, but multiplying it by your erroneous ratio of rather than propagated the arithmetic error to .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly expressed mechanical power as and derived the cubic velocity dependence .
You correctly determined that power increases by more than double when speed doubles, refuting the claim.
You correctly computed using the proper parameters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou wrote , accidentally multiplying the base by the exponent () instead of evaluating .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating base-exponent evaluation () with scalar multiplication () during mental arithmetic.
REASONING PATH
Your ACEpath teacher’s suggested approach- Evaluating Integer Powers
For any positive integer exponent , , not .
When computing , write or think out each repeated multiplication explicitly: .
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the power ratio: .
Calculate by scaling : (or directly via ).
The claim is false; , and (or ).
Lock it in
How are force and mechanical power related for an object traveling at constant velocity along the line of action?
. Power is the time rate of doing work, so overcoming a force at speed requires watts.
Similar question
A cyclist overcomes aerodynamic drag force (in newtons, with in ). Find the mechanical power output required to cycle at a constant speed of .
Answer
. Key steps: .
An electric car cruises on a flat highway where rolling resistance is negligible and aerodynamic drag is . By what percentage must the traction motor's power output increase if the driver increases speed from to ?
Answer
increase. Key steps: The speed ratio is . Since , the power ratio is . The percentage increase is .
A high-speed train experiences two resistance forces: a constant mechanical rolling resistance and an aerodynamic drag (where is in ). Derive the total power function , and calculate the total power required to cruise at .
Answer
; at , (). Key steps: Total force . Power is . Evaluating at : ; ; total .