Resources

A miniature laboratory air-track glider of mass m=180 gm = 180\text{ g} is launched horizontally by an onboard miniature piston exerting a spring force. The glider is recorded as having an initial kinetic energy of Ek=5.40×105 μJE_k = 5.40 \times 10^5\,\mu\mathrm{J} as it glides along a level track at elevation z=0z = 0. It then ascends a frictionless ramp inclined at an angle θ=24.0∘\theta = 24.0^\circ above the horizontal. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the total linear distance ss along the incline that the glider travels before coming momentarily to rest.

Answer and steps

Final answer

s=0.752 ms = 0.752\text{ m}

Steps

01

Convert all given quantities to SI units

  • Mass of the glider: m=180 g=0.180 kgm = 180\text{ g} = 0.180\text{ kg}
  • Initial kinetic energy: Ek=5.40×105 \muJ=5.40×105×10−6 J=0.540 JE_k = 5.40 \times 10^5\text{ \mu J} = 5.40 \times 10^5 \times 10^{-6}\text{ J} = 0.540\text{ J}
  • Incline angle: θ=24.0∘\theta = 24.0^\circ
  • Acceleration due to gravity: g=9.80 m/s2g = 9.80\text{ m/s}^2

02

Apply the Law of Conservation of Mechanical Energy

Because the track and ramp are frictionless and air resistance is negligible, non-conservative forces do no work on the glider. Mechanical energy is fully conserved between the initial position on the level track and the highest point reached on the incline:

Einitial=EfinalE_{\text{initial}} = E_{\text{final}}

Choosing the level track as the reference height (z=0z = 0):

  • At the launch position, all energy is kinetic: Einitial=EkE_{\text{initial}} = E_k
  • At the highest point, the glider comes momentarily to rest (v=0v = 0), so all energy is gravitational potential energy at height hh: Efinal=mghE_{\text{final}} = mgh

Equating the two: Ek=mgh  ⟹  h=EkmgE_k = mgh \implies h = \frac{E_k}{mg}


03

Relate the vertical height to the distance along the incline

From the geometry of the inclined ramp, the vertical height hh reached by moving a distance ss along the ramp is: h=ssin⁡θh = s \sin\theta

Substitute this into the energy conservation expression: Ek=mg(ssin⁡θ)E_k = mg(s \sin\theta)

Solving for the distance ss: s=Ekmgsin⁡θs = \frac{E_k}{mg \sin\theta}


04

Calculate the numerical value

Using sin⁡(24.0∘)≈0.407\sin(24.0^\circ) \approx 0.407:

s=0.540 J(0.180 kg)⋅(9.80 m/s2)⋅sin⁡(24.0∘)s = \frac{0.540\text{ J}}{(0.180\text{ kg}) \cdot (9.80\text{ m/s}^2) \cdot \sin(24.0^\circ)}

s=0.5401.764⋅0.407≈0.752 ms = \frac{0.540}{1.764 \cdot 0.407} \approx 0.752\text{ m}

(A common pitfall is directly dividing the kinetic energy by mgmg to find the distance along the track, forgetting that gravity acts vertically and doing so calculates the vertical rise hh rather than the path length ss.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sine and cosine components of the incline angle, writing h = s * cos(θ) instead of h = s * sin(θ), which leads to an incorrect distance of 0.335 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.180 kg,  Ek=0.540 J  ⟹  Ek=m⋅g⋅h  ⟹  h=0.540/(0.180⋅9.80)=0.3061 mm = 0.180\text{ kg},\; E_k = 0.540\text{ J} \implies E_k = m \cdot g \cdot h \implies h = 0.540 / (0.180 \cdot 9.80) = 0.3061\text{ m}

  2. Step 2

    h=s⋅cos⁡(24.0∘)h = s \cdot \cos(24.0^\circ)

    Correct

    h=s⋅sin⁡(24.0∘)h = s \cdot \sin(24.0^\circ)

    Because the ramp is inclined at angle θ=24.0∘\theta = 24.0^\circ above the horizontal, the vertical height hh is the opposite side of the right triangle, which requires h=ssin⁡θh = s\sin\theta, not scos⁡θs\cos\theta.

  3. Step 3

    s=0.3061/cos⁡(24.0∘)=0.335 ms = 0.3061 / \cos(24.0^\circ) = 0.335\text{ m}

    Correct

    s=0.3061 msin⁡(24.0∘)≈0.752 ms = \frac{0.3061\text{ m}}{\sin(24.0^\circ)} \approx 0.752\text{ m}

    You solved for ss correctly from your equation, but the numerical result is incorrect due to using the cosine ratio in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all given quantities into standard SI units (m=0.180 kgm = 0.180\text{ kg} and Ek=0.540 JE_k = 0.540\text{ J}).

You set up the conservation of mechanical energy principle accurately to find the vertical rise hh.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Ratio Confusion on Incline

You used cos⁡θ\cos\theta rather than sin⁡θ\sin\theta when relating the vertical height to the hypotenuse distance along the incline.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the adjacent and opposite legs of a right triangle when resolving incline geometry: the vertical rise is opposite to the incline angle above the horizontal, so it requires the sine ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Triangle Sides from the Angle
  • For an incline angle θ\theta measured above horizontal, vertical rise is the side opposite θ\theta (h=ssin⁡θh = s\sin\theta), while horizontal run is adjacent to θ\theta (x=scos⁡θx = s\cos\theta).

  • Always draw a right triangle, label the hypotenuse ss, and check whether the quantity you need is opposite (hh) or adjacent (xx) to θ\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct geometric relation for the vertical height: h=ssin⁡(24.0∘)h = s \sin(24.0^\circ).

  2. Solve for the distance along the incline: s=hsin⁡(24.0∘)=0.3061 msin⁡(24.0∘)s = \frac{h}{\sin(24.0^\circ)} = \frac{0.3061\text{ m}}{\sin(24.0^\circ)}.

  3. Evaluate numerically: s=0.30610.4067≈0.752 ms = \frac{0.3061}{0.4067} \approx 0.752\text{ m}.

Final answer

s=0.752 ms = 0.752\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the incline as a right triangle before writing trigonometric relationships.

  • Double-check that vertical elevation uses sin⁡θ\sin\theta when θ\theta is measured relative to the horizontal floor.

OverviewACEpath Teacher's Diagnosis

02 The student misconverts microjoules to joules by using a conversion factor of 10^-3 instead of 10^-6, resulting in a kinetic energy of 540 J and an excessively large distance of 753 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.180 kgm = 0.180\text{ kg}

  2. Step 2

    Ek=5.40∗105∗10−3=540 JE_k = 5.40 * 10^5 * 10^{-3} = 540\text{ J}

    Correct

    Ek=5.40×105 \muJ=5.40×105×10−6 J=0.540 JE_k = 5.40 \times 10^5\text{ \mu J} = 5.40 \times 10^5 \times 10^{-6}\text{ J} = 0.540\text{ J}

    You used the conversion factor 10−310^{-3} for microjoules (μJ\mu\text{J}), but 10−310^{-3} represents milli (m\text{m}). The prefix micro (μ\mu) corresponds to 10−610^{-6}.

  3. Step 3

    Ek=m∗g∗s∗sin⁡(24.0∘)E_k = m * g * s * \sin(24.0^\circ)

  4. Step 4

    540=0.180∗9.80∗s∗sin⁡(24.0∘)540 = 0.180 * 9.80 * s * \sin(24.0^\circ)

    Correct

    0.540=0.180×9.80×s×sin⁡(24.0∘)0.540 = 0.180 \times 9.80 \times s \times \sin(24.0^\circ)

    Your algebraic substitution was set up correctly, but it used the incorrect numerical value of Ek=540 JE_k = 540\text{ J} from Step 2.

  5. Step 5

    s=540/0.7174=753 ms = 540 / 0.7174 = 753\text{ m}

    Correct

    s=0.5400.7174≈0.752 ms = \frac{0.540}{0.7174} \approx 0.752\text{ m}

    You solved for the distance accurately using your substituted numbers, but the final value carried forward the factor-of-1,000 prefix error.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted the glider's mass accurately into standard SI units of kilograms.

You correctly identified that mechanical energy is conserved along the frictionless ramp.

You properly related the vertical rise to the incline path length using trigonometry (h=ssin⁡θh = s\sin\theta).

You executed the multi-step algebraic solving and rounding accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix confusion

You substituted 10−310^{-3} instead of 10−610^{-6} when converting from microjoules to joules.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the SI prefix micro (symbol μ\mu, meaning 10−610^{-6}) with the prefix milli (symbol m\text{m}, meaning 10−310^{-3}). A glider in a classroom air track would realistically travel under a meter, so a result of 753 m753\text{ m} is a clear physical indicator of a unit scaling error.

REASONING PATH
Your ACEpath teacher’s suggested approach
Metric Prefix Definition
  • 1 \muunit=10−6 units1\text{ \mu unit} = 10^{-6}\text{ units}, whereas 1 m unit=10−3 units1\text{ m unit} = 10^{-3}\text{ units}.

  • Always recall: milli is thousandths (10−310^{-3}), and micro is millionths (10−610^{-6}).

Physical Reasonableness Check
  • Laboratory air tracks are typically 1–2 m1\text{--}2\text{ m} long.

  • If a lab glider calculates to travel 753 m753\text{ m} (nearly half a mile), immediately inspect the order of magnitude of your input conversions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert microjoules to joules using 10−610^{-6}: Ek=5.40×105×10−6 J=0.540 JE_k = 5.40 \times 10^5 \times 10^{-6}\text{ J} = 0.540\text{ J}.

  2. Substitute the corrected kinetic energy into the energy conservation equation: 0.540=(0.180)(9.80)ssin⁡(24.0∘)0.540 = (0.180)(9.80)s\sin(24.0^\circ).

  3. Evaluate the denominator: (0.180)(9.80)sin⁡(24.0∘)≈0.7174 N(0.180)(9.80)\sin(24.0^\circ) \approx 0.7174\text{ N}.

  4. Solve for the distance: s=0.5400.7174≈0.752 ms = \frac{0.540}{0.7174} \approx 0.752\text{ m}.

Final answer

s=0.752 ms = 0.752\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the standard SI metric prefixes: milli (10−310^{-3}), micro (10−610^{-6}), nano (10−910^{-9}), and pico (10−1210^{-12}).

  • Perform a physical sanity check on your final numeric answer before moving on to ensure the magnitude makes sense in a laboratory setting.

OverviewACEpath Teacher's Diagnosis

03 The student equates the linear distance along the incline directly to the vertical height h without accounting for the incline angle θ, resulting in s = 0.306 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.180 kg,EK=0.540 Jm = 0.180\text{ kg},\quad E_K = 0.540\text{ J}

  2. Step 2

    EK=m∗g∗sE_K = m * g * s

    Correct

    Ek=mgh=mg(ssin⁡θ)E_k = mgh = mg(s\sin\theta)

    Gravitational potential energy depends strictly on the vertical elevation hh, not the slanted distance ss along the ramp. Since the ramp is inclined at an angle θ=24.0∘\theta = 24.0^\circ, the vertical rise is h=ssin⁡θh = s\sin\theta.

  3. Step 3

    0.540=0.180∗9.80∗s  ⟹  s=0.540/1.764  ⟹  s=0.306 m0.540 = 0.180 * 9.80 * s \implies s = 0.540 / 1.764 \implies s = 0.306\text{ m}

    Correct

    s=Ekmgsin⁡θ=0.540 J(0.180 kg)(9.80 m/s2)sin⁡(24.0∘)≈0.752 ms = \frac{E_k}{mg\sin\theta} = \frac{0.540\text{ J}}{(0.180\text{ kg})(9.80\text{ m/s}^2)\sin(24.0^\circ)} \approx 0.752\text{ m}

    Your arithmetic was carried out correctly for the formula you wrote, but solving Ek=mgsE_k = mgs yields the vertical height h=0.306 mh = 0.306\text{ m} rather than the ramp travel distance ss.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted all given values into standard SI units (0.180 kg0.180\text{ kg} and 0.540 J0.540\text{ J}).

You correctly recognized that initial kinetic energy transforms into gravitational potential energy at the highest point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Incline Distance with Vertical Height

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the linear distance along the ramp (ss) directly in the gravitational potential energy formula Ep=mghE_p = mgh, overlooking the right-triangle relationship between the vertical rise and incline displacement (h=ssin⁡θh = s\sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational Potential Energy Reference
  • Ep=mghE_p = mgh, where hh is strictly the vertical height above the reference level (z=0z = 0).

  • Always draw a right triangle for an inclined path to decompose distance along the slope ss into vertical rise h=ssin⁡θh = s\sin\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the vertical height in terms of the incline distance: h=ssin⁡θh = s\sin\theta.

  2. Set initial kinetic energy equal to final gravitational potential energy: Ek=mg(ssin⁡θ)E_k = mg(s\sin\theta).

  3. Solve for ss: s=Ekmgsin⁡θs = \frac{E_k}{mg\sin\theta}.

  4. Substitute the values: s=0.540 J(0.180 kg)(9.80 m/s2)sin⁡(24.0∘)=0.5401.764×0.4067≈0.752 ms = \frac{0.540\text{ J}}{(0.180\text{ kg})(9.80\text{ m/s}^2)\sin(24.0^\circ)} = \frac{0.540}{1.764 \times 0.4067} \approx 0.752\text{ m}.

Final answer

s≈0.752 ms \approx 0.752\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • When working with ramps and inclines, sketch a right triangle and explicitly mark the hypotenuse as ss and the opposite vertical leg as h=ssin⁡θh = s\sin\theta.

  • Double-check that the variable substituted into Ep=mghE_p = mgh is purely the vertical displacement.

Lock it in

Similar question

01

A 0.250 kg0.250\text{ kg} cart on a frictionless track ascends a ramp inclined at 30.0∘30.0^\circ above horizontal. If its vertical rise is h=0.450 mh = 0.450\text{ m} before stopping, how far along the ramp incline ss does it travel?

Answer

s=0.900 ms = 0.900\text{ m}. Using h=ssin⁡θh = s\sin\theta, we have s=hsin⁡(30.0∘)=0.450 m0.500=0.900 ms = \frac{h}{\sin(30.0^\circ)} = \frac{0.450\text{ m}}{0.500} = 0.900\text{ m}.

02

A toy car of mass m=0.500 kgm = 0.500\text{ kg} is launched with an initial kinetic energy of Ek=1.96 JE_k = 1.96\text{ J} up a frictionless ramp inclined at θ=20.0∘\theta = 20.0^\circ. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the total distance ss it moves along the ramp before coming momentarily to rest.

Answer

s≈1.17 ms \approx 1.17\text{ m}. By conservation of energy, Ek=mgh  ⟹  h=Ekmg=1.960.500×9.80=0.400 mE_k = mgh \implies h = \frac{E_k}{mg} = \frac{1.96}{0.500 \times 9.80} = 0.400\text{ m}. Then s=hsin⁡(20.0∘)=0.4000.3420≈1.17 ms = \frac{h}{\sin(20.0^\circ)} = \frac{0.400}{0.3420} \approx 1.17\text{ m}.

03

A 2.00 kg2.00\text{ kg} box is projected up a frictionless ramp inclined at 15.0∘15.0^\circ with an initial speed of v0=3.50 m/sv_0 = 3.50\text{ m/s}. Find the distance ss traveled along the ramp when its speed decreases to 1.50 m/s1.50\text{ m/s}. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

s≈1.98 ms \approx 1.98\text{ m}. By conservation of energy, 12m(v02−vf2)=mgh  ⟹  h=3.502−1.5022×9.80=10.019.6≈0.5102 m\frac{1}{2}m(v_0^2 - v_f^2) = mgh \implies h = \frac{3.50^2 - 1.50^2}{2 \times 9.80} = \frac{10.0}{19.6} \approx 0.5102\text{ m}. The distance along the ramp is s=hsin⁡(15.0∘)=0.51020.2588≈1.98 ms = \frac{h}{\sin(15.0^\circ)} = \frac{0.5102}{0.2588} \approx 1.98\text{ m}.

Loading workspace…